I have no sound from my desktop pc model fujitsu esprimo c5200 fmv

I change language Japanese English and format the destop pc model #fujitsu JVM esprimo c5200 / impossible audio controller ethernet controller install my problen is I don't have not software / installer can help me solve my problem. Where can I get it fixed thank you for your

Hello

Drivers must come from Fujitsu or the OEM of the aircraft.

Fujitsu (US) computer
http://www.Fujitsu.com/us/Services/Computing/

Fujitsu Support and downloads (US)
http://www.Fujitsu.com/us/support/

Fujitsu Support and downloads (Asia Pacific)
http://www.PC-AP.Fujitsu.com/support/index.html

Fujitsu support (outside the Asia Pacific area)
http://www.Fujitsu.com/SG/products/PC/support/service/warranty_int.html

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • No sound from my desktop Windows 7

    I have no sound from my desktop computer. I have Windows 7. I ran the diagnostics and the only message I got is that my speakers are not connected. They are permanently connected, so it was not helpful. I have the latest drivers and my sound card is ok. I disconnected and reconnected my speakers and restarted the computer, but still have no sound. I have no connected devices. I don't know what to do.

    Dick

    You had your configuration changed default value of speakers...

    1. Beginning
    2. Control Panel
    3. Material and audio
    4. Change system sounds
    5. Sounds tab
    6. In the sounds drop-down box model, make sure Windows default is selected
  • How can I get sound from my desktop to my TV Toshba pc?

    His record game

    How can I get sound from my desktop pc to my TV Toshba, that Iam currently using as my monitor...  Thank you

    You need to run a separate cable for audio.

    See the following Note of http://windows.microsoft.com/en-US/windows7/Connect-your-computer-to-a-TV

    Cables VGA, DVI and component video don't support audio signals. However, HDMI cables are supported, but not all, audio signals compatible HDMI video audio support cards. If your TV has an audio input, you might be able to connect an audio cable separate from their computer directly to the TV card. Otherwise, you need to connect the audio signal to a different device, such as external speakers or your stereo. For more information about sound cards, see sound cards: frequently asked questions.

  • I have no sound from my pc__

    I have no sound from my pc. im running windows vista 32 bit

    http://support.Microsoft.com/GP/mats#tab2
     
    --
    ..
    --
    "darci00dn" wrote in message news: cf37c712-a634-4452-8716-d7535bf42de9...
    > I have no sound from my pc. im running windows vista 32 bit
    >
     
  • I have no sound from the external speaker

    I connected this morning my iPod in my car, as always. But today I got the only sound from the internal speaker and no sound from the external speaker in the car. So far I have never had problems.

    How did the car system connected to the car?

  • The volume control is grayed and I have no sound from my PC

    I have windows XP and can't hear any sounds from my computer, but there is nothing wrong with my speakers. The problem is the volume control is gray and I can't increase the volume. Any help please

    Original title: sound problem

    Hi Abrewaba,

    You have made any changes to your computer recently?

    I suggest you to follow the steps from the link and check if it helps.

    No sound in Windows

  • I have no sound from either my external speakers nor my helmet I need online courses. I have Microsoft Vista Home Premium

    I'm not all the sounds from my computer. I recently inherited this system a deceased relative, and I didn't have administrator rights to allow me full access, I'd need to ranked online. I didn't start the disc originally supplied with the unit is full. I made a disc that I ran to allow me to at least get a new online administrator rights but since reboting I do not have any sound and did not have the complete software for Microsoft Vista how can I get my sound back? and how I can bring my computer back up to date in its functions?

    Start the second then the first automated services troubleshooting here
    http://support.Microsoft.com/GP/mats#TAB0
     
     
     
    --
    ..
    --
    "Mike Cee" wrote in message news: 78f768f8-FCC - 41a 7-871 a-37030460c 556...
    > I can not all the sounds from my computer. I recently inherited this system
    > a close deceased person and I did not have the administrator rights to enable
    > me full access, I needed to ranked online. I didn't have the full departure
    > disc initially provided with the device either. I had a single disc
    > which I ran for me to administrator rights to at least get a new online
    > but since reboting I do not have any sound and don't have the full software
    > for Microsoft Vista how can I get my sound back? How do I bring my
    > computer back up to date in its functions?
     
     
  • I have no sound from my laptop

    I have no sounds in my laptop tried the obvious things. If all goes well lol.

    Hello

    1 how long have you been faced with this problem?
    2. don't you make changes on the computer before this problem?
    3 have. what troubleshooting steps you tried?

    In response to the questions above could help us help you better.

    Try the steps in the following article if you don't him have not tried.
    No sound in Windows
    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  • I have no sound on my desktop-

    I tried several options, including Fix It and still do not have any sound on my computer

    Hello

    1. Since when are you facing this problem?
    2. what Fixit did you run on the computer?

    Here are some suggestions that you can try:

    Step 1: Uninstall and reinstall the drivers for your sound card and check if it solves the problem.

    Follow these steps:
    a. right click on my computer, click Properties and click the Hardware tab, then click Device Manager.
    b. in the list of devices, click sound, video and game controllers.
    c. right-click on the specific device and then click Properties.
    d. tab driver, click on uninstall.
    e. restart the computer.
    f. open the Device Manager again.
    g. right click on the sound card, and then click on update driver to open the Hardware Update Wizard. Follow the instructions in the wizard.

    See this article for additional troubleshooting:

    How to fix sound problems in Windows XP:
    http://support.Microsoft.com/kb/307918

    If the sound was working before and then restore your computer.

    Step 2: perform a system restore to restore the computer to an earlier point in time.

    Refer to this article:
    http://support.Microsoft.com/kb/306084

    Kind regards
    Afzal Taher-Microsoft Support.
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • I have no sound from a WANT of HP dv7 notebook Windows 8.1.

    I have a laptop dv7 in HP Envy with Windows 8.1. The sound does not work, and the volume icon says that no Audio output device is installed. Help, please! I did the 8.1 update a few days ago, don't know whether or not I had after that. Help, please!

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59654.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you're done, shut down the laptop by holding down the key SHIFT left click Shutdown to temporarily prevent a hybrid boot.

    Then disconnect the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

    Kind regards

    DP - K

  • Have no sound from the computer after a friend played it

    Original title: A friend used my PC, I thinlk to play and now I cannot have her more, hear nothing and do not know how to get back

    My computer is a Hp, Vista premieum and don't know much. I think that simple manipulation, but?

    Hello

    Method 1: Run the troubleshooting of audio playback and then check


    Tips-for-fixing-Common-Sound-Problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

    For more information, please visit the link below

    Non-son in windows
    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  • I have no sound from speakers.

    This could be if all goes well a very simple problem to solve... I bought a pair of speakers Logitech Z200 earlier for our computer, that we were not make big noise of the Realtec already existing on the computer speakers.  I plugged in, turned power on, verified that they are plugged into the correct port etc etc but there is not its coming out of them (the sound is always coming out with built-in computer speakers).  Can someone help me please?  Thanks in advance

    Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  • Have a HP Pavilion A1020N desktop computer, model # PS583AA. Can I use wireless networks, and if so, what to do

    I need to make it work?

    Yes, you can install a PCI Wireless Card on your system. Please make sure that you buy the card that has drivers for the operating system installed in your office...

  • No sound from Port Replicator NetDock after installing XP on Tecra 8200

    After a recent accident, I re-installed my 8200 using XP SP2. Now I have no sound from the Netdock. All other functions of the DS seem to be OK.
    I downloaded the latest drivers Yamaha for XP SP2, but still no sound.

    I get no option to change analog output on the control panel of Yamaha. Device Manager lists system Yamaha DS + XG Legacy Sound (WDM) and Yamaha DS - XG PCI Audio Codec (WDM) as well as other codecs, gane and multimedia control device port.

    I want to get her back through the Netdock.

    Thank you

    Pete

    [Edited by: admin August 10 05 19:30]

    Hello Pete

    One of my friends has a Tecra 8200 running Windows XP Home edition, but SP1and everything works correctly. I really don' t understand why the its doesn't work.

    Sorry, but this unit is not supported for Windows XP Home edition, and it is not easy to say why the Board its doesn't work properly. If all goes well, another forum user has more experience.

    Good luck!

  • Satellite A505-S6973 - no sound from my laptop speakers

    I have an A505-S6973 and today I lost volume on my speakers. When I took my headphones, I hear, but without the headset is plugged in, I have no sound from my laptop speakers.

    I checked the Manager of devices for software problems but everything is erased, also, my volume is completely on.

    I tried a restore, but in vain, as I tried to uninstall and reinstall the extra value package but when you try to run the software after extraction it an error [0x8146045B] reports itself.

    This morning, everything seemed to work fine, the only thing I can think, I removed my places of sharing network of windows media.

    If that's the culprit can someone guide me on how I can re - install. In addition, value added package question, is there something that can be done, because the buttong enable/disable touchpad when press nothing happens, but if I use the function with F9 key it activates / deactivates.

    I really hope someone can help me, apparently, that it is an unlucky weekend for me.

    Hello

    Have you tried to reinstall a sound card driver? If you have not it, try it...

Maybe you are looking for

  • Want 1105dx m6: m6 1105dx desire has bluetooth?

    Model # C2L91UA #ABA I see that I'm supposed to have bluetooth but after installing windows 10 or something at this time I am not able to find it anywhere, including the Unit Manager.

  • no error with NonLinearFitWithMaxIters, even for 1 iteration only...

    Hi all Today, I tried using the function in the advanced analysis library NonLinearFitWithMaxIters (CVI 9.0). I want to know is if the function found gave the best fit the number of iterations that you want. According to aid, if NonLinearFitWithMaxIt

  • accuracy of the module C-9203

    The OR the page for the C 9203 module indicates an accuracy of 0.049 my over a range of 0-20 my.  (or approx. 800 mode mA-20 + 20). Is it a typing mistake or is this really not very accurate module? Manual doesn't mention all this precision, but evok

  • Acer Aspire TimelineX 3820 t - Windows Update - Synaptics Touch Pad conflict

    Hello I just bought an Acer Aspire TimelineX, 3820 T. It's like a Synaptics Touchpad, which works fine until I do a Windows Update. Once I do the update of Windows, the touch pad doesn't work. Even if it works, there is no control over the touchpad.

  • Server to the client

    Dear all, I wrote a lookout process and now I have to use the client server architecture, please help me build the client version of the initial process. Best regards, Mohammad javad Danesh