I have TO install Visa to use com ports
Hello
I want to use WinXP com ports. All of the examples that I find searching the Web using Visa.
Is there a screw that can handle com without Visa being installed ports?
All I do is read and write binary data to and from serial ports.
Thank you very much
Andy
You can use .NET:
http://msdn.Microsoft.com/en-us/library/system.IO.ports.SerialPort.aspx
Tags: NI Software
Similar Questions
-
Original title: some j
WINDOWS 7 allow interrupt sharing. We have a system that has several COM ports and IRQS not enough. In XP Pro, there was a sharing bit interruption that you can set in the registry editor that would allow this sharing. Sound in windows 7, but it doesn't have the same results. Any ideas?
Hello
I suggest you to report this issue in TechNet Windows 7 IT Pro Forums: http://social.technet.microsoft.com/Forums/windows/en-US/home?forum=w7itprohardware
Thank you.
-
How can I clear the COM ports that are appearing as in use
Original title: used Com Port
I have a device plugged into my laptop Lenovo XP with service pack 3 and it is to this day. When I try to reassign the com port on the unit to the USB port using the Device Manager, I find 2 to 11 com ports are in use. How can I erase these com ports as there nothing to use them?
You are welcome.
There should be a printers and Faxes folder in Control Panel (see photo)
http://www.onlinecomputertips.com/tutorials/control_panel.html
See if that helps
How to remove printer ports in Windows XP
http://www.ehow.com/how_8120289_delete-printer-ports-Windows-XP.html
To remove a Port
How to remove com ports in Windows XP
http://www.ehow.com/how_6216286_remove-ports-Windows-XP.html
-
Need to change the com port number, but users do not have administrator rights
Our users don't have administrator rights, however, there are a few pieces of software that communicates with the hardware using COM ports. Since they don't have administrator rights, you may not click on advanced in the communications port to set the port to the necessary com com.
I found reg hacks online that say will open the advanced screen to allow the com to be changed, but none that I've found work successfully.
Can someone tell me the correct registry setting that I need to grant permission to in order to open the advanced under properties tro communications button and have the available com port number to change.
Thanks in advance.
Hello
You have the computer connected to a network or domain?
It is not possible to access advanced screen or advanced without administrator rights. I suggest you to contact the administrator of the system to help about it.
-
allow non-admins to use the COM port?
Hi all
does anyone know how to change the COM port settings so that the ports are "activated" for users other than just the administrator?
Thank you very much!Hello
You must have administrator privileges to change the COM port settings To do this, you should contact the administrator of the computer.
Hope this information helps.
-
change the com port assigned to the fax and scan
I used fax and scanning for once. I had to move my external modem to a different port.
I don't know how to change the windows fax and scan com port manually.
the wizard does NOT start, I guess because the fax is installed and worked until I had to change the number of COM port... I need to change the number of pot with hundreds of research, it seems that no one knows how to change manually the Compote in windows fax and scan, unless they use the wizard.
my assistant does not start. I guess I'm 'old school' I don't need an Assistant, I need to manually change the fax uses com port.
:-), it's frustrating because help said only: click "fax" in the lower left corner, and they all assume the installation wizard starts and everything will be fine. :-(
the wizard does not start. :-(
I am desperate to get my fax work and need to know how to set the correct port number in a system that is installed and running, such as the wizard never starts.
for anyone who goes out at the end of questions and ideas, I have a fax application stand alone who is working with the new port setting. It's just not a good app for my needs
Please?
Thank you
John
Post proposed by the moderator of the appropriate forum category
Hi John,.
You can follow the steps below to change the COM port for a modem:
1. search the Device Manager.
2 look for the Modem device, right-click on it, and then click Properties.
- If the change settings button is present, you must click on it to make changes to the appliance. If the user account control dialog box appears, confirm that the displayed action corresponds to what you want, and then click continue.
- If the change settings button is not present, the modem does not support the ability to change the modem settings. Refer to the documentation provided by the vendor of your modem.
3. on the Advanced tab, click Advanced port settings.
- If this option is not displayed, the modem does not support the ability to change the assigned COM port. Refer to the documentation provided by the vendor of your modem.
If the same persists, we suggest that you post your query in Microsoft TechNet so that their support team will provide you in-depth assistance.
Kind regards.
-
Assignment of a USB port to a COM Port.
I am running Windows XP Professional I have software that uses COM ports in the settings. You can use my USB devices. My computer only has USB ports. How can I redirect say COM 5 to a USB port or a device? Can I connect a USB device to a specific COM port? I know that if I use a USB series adapter it gives me a virtual com port is it possible to assign USB to a virtual com port without the adapter?
As I pointed to a poster earlier in this thread, there is no way to make a USB port to simulate a COM port in the software. Necessary pins simply do not exist. You need a USB adaptor to series which is located practically in the world of computers and their accessories are sold.
-
Jin
Sometimes, my keyboard stops responding, despite the checkist troubleshooting.
Then it works again after I have shut down and restart my mac!
is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the time... also openoffice document prog...
What else could be?
I just replace the keyboard with a new one, but the problem persists.
my mac has also been in mac repair and they found nothing wrong.
Thank you!
Please run and view a report of EtreCheck http://etrecheck.com/
-
My Mozilla Firefox browser does not open 4.5 sites that I use the most. That is, among other things, Gmail, Facebook, LinkedIn and other 2. I have re installed twice and got a version update, but the problem is still there. Please help me, I am so worry not.
Thank you.
Shakeel.
See:
You can try to reset (power off / on) of the router.
Do a check with some malware malware, analysis of programs on the Windows computer.
You need to scan with all programs, because each program detects a different malicious program.
Make sure that you update each program to get the latest version of their databases before scanning.- http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
- http://www.superantispyware.com/ - SuperAntispyware
- http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
- http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
- http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
Alternatively, you can write a check for an infection rootkit TDSSKiller.
See also:
- "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
-
Virtual Com ports never get reused after UN-installing of software that use
I have install and uninstall the bluetooth drivers (Microsoft, broadcom and bluesoliel) in order to obtain different devices to work. When I started this exercise, used by bluetooth comm ports were low numbers (com 4 and 5 for example). If I uninstall the bluetooth drivers, then reinstall the or some other driver, the com port numbers used become com 6 and com 7). Old ports com can never get reused and there seems to be any place where I can find them (and I hope that free them from their State of limbo).
Now that I've got things nearby work properly, I get to com 25.
This also happens with the bluetooth drivers not as my GPS through a series of USB converter. or my palm for synchronization software.
That is to say the problem is not just with bluetooth. It's with any program that uses a serial port.
I'm afraid I might run out of com ports, and perhaps these unused com ports consume resources (are they built during startup?) Hmmmm... Looks like I ran out of space... Al
Hi again
Well, I made a variation on your theme
1 turned on or plugged in devices that could use a virtual serial port - 3 of them
com 26 2 with one of them, I have attributed it to 25, then 24, etc. all the way up to 3 comm
That unlocks (disabled the use in indication) for all of the unused ports.reassigned the 2 remaining ports to com 4 and 5
Thanks for the help
Al -
I have a license of creative cloud in design and I use a no cloud of photoshop 5.5 version. I only have photoshop installed and works on both computers I know. My desktop and my laptop. When I connect to internet, I am now unable to use photoshop on my main computer. It may be that I had photoshop on an old computer that I use is no longer, but I'm not sure. How can I get this sorting? Do I know if I have an activated copy on an old computer (which has been scrapped) and get it off?
If you had Photoshop working already on the machine, then it probably isn't a problem of activation.
If you do not have to Support Adobe disable to you it must be done for all installations since each machine cannot be targeted by them.
To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.
Serial number and activation support (non - CC) chat
This could apply: how we prevent cloud creative resume my perpetual license CS6?
-
... I own CS6 13.0 2013 Mac. worked 4 Mac update PS months.after has stopped working. I have re installed... but failed. ! Then I even loaded on another Mac. This time a CS PS legal of no use 6.but... The dealer assured aid... but... NO.. ! Please HELP.
Hello... I m Armani... I bought Adobe PhotoShop CS613.0 on June 5, 2013... the Macintosh Version. It worked well for 4 months... then I updated my Mac. .... He started the real problem...! PS has stopped working after the update... I tried and tried re installed... but... missed...! as I was to deal with a problem of working time... I have loaded the same version of PS on my other I Mac... Since then... I m having a moral PS CS 6... but no use... I spoke with garage... who I bought the beam of CS... He assured me help... but until today... Hummmmmmm... Please guide me... Its so I had wested my money... Please...!
Try to disable and uninstall, then use the cleaning tool, then reinstall, then activate...
Help of activation & deactivation
Adobe Creative Suite cleanup tool
helps resolve installation for CS3 thru CS6 and creative cloud problems
http://www.Adobe.com/support/contact/cscleanertool.html
Download and Installation Help-
https://helpx.Adobe.com/download-install.html
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
-
I have a new iMac and used the disk to install version 6 of photoshop, but I have upgraded to version 12, but its version 6. How can I get version 12? I tried to uninstall, but it does not ask the serial number version 12. Thank you
If you want version 12, then you don't need to install version 6, you must install version 12. If you are really talking about Photoshop Elements, not Photoshop, then the link below, you should get to the download.
PES 10, 11, 12, 13, 14 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html
-
Today I bought a new Mac that does ' t have a cd/dvd drive. I also bought Adobe photoshop elements 13. Is it possible that I can install this without using the provided disks? Help, please
http://www.Adobe.com/downloads/other-downloads.html can help
-
I bought Photoshop elements 13 for my Mac that doesn't have a cd player. I have already installed some Elements 6 years ago. Can I still install the upgrade without using the cd?
PES 10, 11, 12, 13 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html
Maybe you are looking for
-
2015 iMac 5K - investigation of cooling fan
Hey guys,. I just got the iMac end of 2015 5K with i7 Quad-core (skylake), 4.0 GB AMD R9 M395X, 32 GB of RAM, 2 TB Fusion Drive. The cooling fan is very quiet and it's quieter in the way, but when I've rendered from Adobe After Effects or Adobe Premi
-
How to make a global search in messages between quotation marks?
Using Thunderbird 24.4.0 on Ubuntu. Is it possible to do a global search in messages between quotation marks? I read https://developer.mozilla.org/en-US/docs/Mozilla/Thunderbird/gloda, "whittlers Content" section. I consider this description it's a f
-
Toshiba virtual Store account Reset - 18468
Plese reset my TOSHIBA 18468 VIRTUAL STORE account. Thanks :).
-
Reinstall Windows 7 Edition Home Premium x 64 on Satellite R850
I made the recovery disc (5 DVDs). My question: should I reinstall the operating system recovery disc or can I install the trial Windows 7 Home Premium and activated with my serial number?
-
If I set this up on my pc I can play my games?
If I put this op on my pc can I get games on my account?