I have windows haveremoving 10 to return to the original

Similar Questions

• Currently have Windows 8 on my laptop but the motherboard that crashed

  Currently have Windows 8 on my laptop but the motherboard that crashed, if I replace the motherboard with one from the same exact laptop computer than the one I have now, but new motherboard has different Intel processor installed on it while my old laptop had an AMD processor that will be installed on my old laptop and Windows 7? If it's Windows 7 I will be able to recover Windows 8? There will be a conflict swapping of cards mothers and from Windows 8 with processor AMD for Windows 7 with Intel? Or I should I just put my old hard drive of the laptop which was crushed in the new laptop and all re - install Windows 8 on this laptop?

  Hello Kwame,

  Whenever you install an operating system on a computer, it considers that all the material in the computer and configures the file system and the BIOS settings.

  When you make a few changes on the material as, RAM, graphics card or add addition hard drive change, it is not necessary to reinstall the operating system.

  When you make big changes link, change the motherboard, CPU or hard drive, you must reinstall the operating system.

  Now, in your case, you've changed the mother board and processor. Therefore, reinstall the operating system.

  You can install Windows 7 or Windows 8, but you must reinstall the operating system. The operating system on the hard drive does not recognize the new motherboard.

  Important: Since you have changed the motherboard, if you reinstall the operating system Windows 8 or Windows 7, it might not let you to activate the operating system, because he sees the computer as a new computer or on another computer. I suggest you activate by phone.

  Check out these links to find out how to reinstall Windows 7 or Windows 8 and to activate by phone.

  Installation and reinstallation of Windows 7

  How to perform a clean installation of Windows 8

  How to contact a Microsoft Product Activation Center by phone

• Xperia Z5: How to return to the original photo after you save the cropped photo?

  Hi, I wonder how I can return to the original photo after saving a photo cropped on my Xperia Z5. The cropped photo doesn't have a sufficient resolution so he could be put on a canvas, I want to return to the original photo before cropping. Thank you :-)

  Hello, troy_t!

  If you crop the photo, the original photo will always be there. You can crop photos on the Album and then use Photo Editor. It is a standard editing program that is provided with your Sony Xperia Z5. If you crop a photo and then save the cropped photo, the original photo will always be there. I can assure you that if you use the standard Photo editing program to crop a photo, the original photo will always be there, even if it was cropped. You can make as many photos cropped the image you want to crop as you want, because the original photo will always be there, even if you may have saved a version cropped the image you wanted at the origin of the crops.

• option to return to the original folder sends me to the last email instead

  Started Firefox mail - without any input from me - back me the last email open (first e-mail Options option, under "Général": after move/delete the message):
  Display the message
  Go back into the original folder)

  Repeatedly, I chose "Return to the original folder", but Firefox wants to make his way. What gives?

  Firefox send an e-mail, it's a web browser.

  If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.

  If your problem is with Mozilla Thunderbird, check out this forum for support.
  http://www.mozillamessaging.com/en-us/support/
  
  or this one
  
  http://forums.mozillazine.org/viewforum.php?f=39

• try to install sp1 of Vista he gets at the end of step 3, then returns to the original OS

  original title: Vista SP1
  Whenever I try to install sp1 of Vista it happens at the end of stagen 3 then returns to the original OS

  Software probably prevents writing to the registry.  Try to install in clean boot mode.

  http://support.Microsoft.com/kb/331796

• Return to the original photo in Camera Raw

  With the help of Photoshop CS5.5 I am at a loss to find ways to discard all changes in Camera Raw and return to the original photo. Can someone point me in the right direction please?

  PRH

  It's pretty easy, just click on the indicated button and choose Camera Raw defaults.

  

  -Christmas

• How to return to the original photos values?

  I made a mistake in the treatment and want to return to the original photos values and repeat.  I looked for help, but found nothing.  How to bring back the original raw image?

  Laura,

  Just click on any State below the upper story, and your image will then return to where it was before.  For example, suppose that you first of all to your image cropped, adjusted exposure, then adjust the saturation, then adjusted for clarity.   Your history list would look like this:

  Clarity Wo

  Saturation Wo

  Exhibition Wo

  Culture

  Import

  Click Import, and your image will be returned to the State of origin - no retouching.  Click exposure Wo and the image will be cropped with change of exposure, but no change of saturation or clarity.  You can experiment and click on any State and see where you are.  However, if you click on a State and then make a montage, all previous States above will be lost.  In other words, if you click on the exhibition (in my example) and then make an adjustment of filling, Saturation adjustments and clarity will be lost.  Of course you can do those again if you wish.

  John

• I've updated my iPhone 6s version 9.3.4 and have no Service, how to return to the previous update?

  I've updated my iPhone 6s in the last (9.3.4) update and now have show no Service at the top. Yesterday, I had intermittent service and thought it was the carrier, but it's not.  I've been using Google Maps and it kept crashing and place would come no Service. Can someone help me to return to the previous update please?

  Before posting this question I've shot and turn it back on repeatedly, I followed all the steps that Apple has informed including turning airplane mode on/off, remove the SIM (my carrier replaced) and reset the network settings. I can't ring Apple for help and live about 3 hours in an Apple Store.  My phone was working perfectly before installing the update.

  You cannot revert to a previous version. Have you tried the latest suggestion here?

  If you cannot connect to a cellular network or cellular data - Apple Support

  If you still cannot connect to a cellular network and have confirmed with your carrier is not a problem with your account, or your network, try to restore your device.

• Skype in point 8.1 of Windows - how can I return to the classic use as in Windows XP and Windows 7

  Dear gentlemen/Madame,

  I searched and could not find a solution to my case.

  I bought a laptop with Windows 8 preinstalled with SKYPE preinstalled as well.

  This new pattern of Skype is very annoying. Please let know us if there is a way how can I go back to classic Skype use, as it was in Windows XP and Windows 7, where I had a shortcut to Skype on my desktop and clicking on the shortcut opens the Skype application directy in the dekstop.

  Please help, as trace this novelty when Skype in Windows 8 will open in a new feature is very comfortable and little pets.

  Please suggest and inform how to return to the previous classic mode of behavior for Skype.

  Thanking you in advance for your kind assistance.

  Konstantin

  You can do this by installing the version of classic desktop Skype.

  The currently most recent Skype 6.13.0.104 desktop version can be installed using the msi installer:

  http://download.Skype.com/MSI/SkypeSetup_6.13.0.104.msi

• I have Windows Vista, can not connect, is the file 'another user '.

  Hi, I have Windows Vista Ultimate Edition.

  my computer restarted somehow while I was with her and now the only way I can connect is a folder named "other users". It asks me a username and password but I don't know what it will be. How can I solve this problem?

  Hello

  Try the methods here, but not exactly the same question that they should help to correct yours.

  Your files must be accessible by any ADMIN account in C:\Users if necessary to migrate
  to another account.

  -----------------------------------------------------------------------------------------------------------------

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Have windows live email. How do the Outbox to elimate an e-mail?

  Have already contacted att.net mail $ they cannot fix.

  You have Windows Live Mail and Windows Live Hotmail.

  Choose where you repost:

  Windows Live Mail:

  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.Windows.live.mail.desktop

  Discussions in Windows Live Mail Desktop

  They should be able to help you when repost you your question to the highest Windows Live Mail Discussion Group.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ·                        Hotmail forums:

  http://www.windowslivehelp.com/forums.aspx?ProductID=1

  They will help you when repost you your question in the Forums above for Hotmail.

  See you soon.

  Mick Murphy - Microsoft partner

• After restart of the mysterious, not the personal files and windows returned to the original version

  I tried various recovery tools to fix this and have come to terms with the loss of almost all of my files.  However, my hard drive always think they are there and not free space.  Any suggestions?

  This looks like a factory restore was performed.  How is a mystery.  Is what kind of computer?
  Y at - it by chance a C: file \Windows.old?   If so, watch Windows.old\Users\%Username% for files.

  If this isn't the case - you can run chkdsk /f since you say disk space seems to be in use to see if it goes to the top of any other file system error.  If nothing of other works and you are sure that there is space missing, I would try to look at the drive outside Windows (by a bootable OS or the connection to another computer) in which case a kit root to cache files, a thought which is quite a long shot.

• New hard drive... Same computer - now have Windows 7 Build 7601 message at the bottom right of your desktop

  How can I fix this - it's the Windows key on the computer - I have had getting a new drive hard because my old one was crushed - how I have this problem. Microsoft wants me to pay for a 'legitimate' copy of Windows 7, but since the death of the old hard drive, the key will be used again on a single computer. Any solution to this?

  I clicked on "Start", right click on desktop, choose Properties and clicked on the activation button. It worked. Now, I don't have this text and it says that my copy of Windows is enabled. Thanks for the information! Must have been some glitch or something.

• I have window 7 ops.how to remove the desktop.ini

  I have window 7 ops.how to remove desktop.ini.pls help.

  Hi shajsomarajan,

  Thanks for posting in the Microsoft Community.

  I understand that you want to delete the desktop.ini

  Desktop.ini manual detection

  Here are the instructions for manual removal of desktop.ini so you can remove unwanted files from your PC. Always be sure to back up your PC before changing anything.

  Note: This manual removal process can be difficult and you may destroy your computer. We recommend that you use the SpyHunter spyware detection tool to check the desktop.ini.
  Step 1: Use Windows file search tool to find desktop.ini path

  1. Select start > Search > all files or folders.
  2. in the "all or part of the file name" section, type or "desktop.ini" file names
  3. for best results, select "search in: Local hard drives" or "look in: My Computer" and then click on the button "search".
  4. when Windows has finished searching, place the cursor on the ' in the «dans le dossier» folder ' of 'desktop.ini', highlight the file and copy / paste the path into the address bar. Record the path of the file to your Clipboard, as you will need the path of the desktop.ini file in the following steps the manual removal to remove.

  * To find out more about how to remove desktop.ini with file search tool

  Step 2: Detect and delete other files desktop.ini

  1. to open the Windows command prompt, go to start > run > cmd, then press the OK"" button.
  2. Type "dir /A name_of_the_folder" (for example, C:\Spyware-folder), which displays the contents of the file even hidden files.
  3. to change directory, type "cd name_of_the_folder".
  4. Once you have the file you're looking for type del 'filename '.
  5. to delete a file in the folder, type "del filename".
  6. to delete the entire folder, type 'rmdir /S name_of_the_folder.
  7. Select the process of "desktop.ini" and click the "End process" to kill him.

• Is is possible to have the images as thumbnails and make sure you can click on it to enlarge and then click on them again to return to the original size? In an interactive pdf?

  I'm designing an interactive catalog in a pdf document. Is it possible to have the images as a thumbnail then click to enlarge the image and then click again to bring them back to the original size?

  Thank you in advance!

  Stephanie

  Select the small image and amounted to a button, place the magnified image and which to a button. Change the button to show/hide the big button do. The large button is hidden until the button is clicked, and then to hide when you click New.

  Alternatively, you can have another InDesign document with images in full size, add text anchors to the images full size. Convert the small images for the buttons (or add invisible buttons above them) and tell the buttons to go to anchor text in the other document. Combine the two documents in a book, export to interactive PDF format.