I have Windows XP. I can't install my Verizon Broadband card because it says I'm missing USBSTOR. SYS, so I'm here to download to fix this problem. How do I do that?

Similar Questions

• The program cannot start because MSVCR110.dll is missing on your computer. Try reinstalling the program to fix this problem - Windows 7

  Hello

  I installed a program in Windows 7 and I can't start it because it appears: "the program can't start because MSVCR110.dll is missing on your computer. Try reinstalling the program to fix this problem. I looked for answers and I found that I can install this http://www.microsoft.com/en-us/download/details.aspx?id=30679# (Visual C++ Redistributable Packages). In this connection, there are 3 files to download: VSU_4\vcredist_x64.exe, VSU_4\vcredist_x86.exe and VSU4\vcredist_arm.exe. My question is which file should I download or if I have to download each of them. How can I know which one I need to upload?

  Can someone help me please?

  Thank you

  Sebastian.

  VCRedist_x64 is for 64-bit systems.

  Vcredist_x86 is for 32-bit systems.

  If you are running Windows 7 32 bit, just install the x 86 version.  If you have Windows 7 64-bit, you may need to install the x 64 and x 86 version. First try the x 64. I f it does not work, install the x 86 version as well.

  vcredist_arm.exe is for devices using ARM processors which are compressed as the Microsoft Surface.

• Error: The program cannot start because sqmapi.dll is missing on your computer. Try reinstalling the program to fix this problem. (Unable to install SP1)

  What is Spinstall.exe

  I can't install windows SP1 "the program can't start because sqmapi.dll is missing on your computer. Try reinstalling the program to fix this problem. »
  How can I fix?

  First of all, please see - How to use the tool File Checker system to resolve missing or damaged on Windows Vista or Windows 7 system files

  If execution of the System File Checker does not have the Service Pack Setup error, then suggest that you Configure the system to boot before attempting to apply SP1 to exclude interference from 3rd party software - How to solve a problem by performing a boot in Windows Vista or in Windows 7

  You can also try to download and save the full, stand-alone SP1 package, create a new folder on the root drive (the drive where Windows is installed on, usually C:\), name the SP folder, and then move the SP1 downloaded & saved in this folder.
  Configure the system to boot, then try another attempt at installation of SP1.

  The full, stand-alone SP1 packages can be downloaded and saved this page-

  Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)

  Click on the button continue to validate Windows 7, and then click the download in the download for your system architecture (Windows6. 1 - KB976932 - X 86 .exe or Windows6. 1 - KB976932 - X 64 .exe) to start the download.

  If no joy, contact Microsoft for assistance to get SP1 installed
  https://support.Microsoft.com/OAS/default.aspx?Gprid=14019&St=1

  Launch the request for assistance by clicking on the edition of Windows 7 is installed.

• InDesign CS6 "the program can't start because Core Foundation_v11.dll is missing on your computer. Try reinstalling the program to fix the problem.

  Hi all

  I'm under Indesign CS6 in Windows 7. Lately, when the program opens, I get the error pop up: "the program can't start because Core Foundation_v11.dll is missing on your computer. Try reinstalling the program to fix the problem"when I click OK, the program continues to load as usual, with nothing going wrong that I can see. I would like to get rid of the error message though. I tried to reinstall and looking for problems with multiple antivirus and anti-malware programs, all in vain (no sign of any viruses or malware). Does anyone have a suggestion on how to restore the missing file? Thanks much for any help.

  Wayne

  With a little more research I found the source of the problem. For anyone interested, it is explained here

  Missing file: CoreFoundation_v11x64.dll

  I tried to install a free trial of Extensis Suitcase last week, but for some reason any it is impossible to install. This is after I started noticing the error, but because the suitcase was not to load the two events not connect! After reading the above thread involving the suitcase, I looked in the InDesign plug-ins folder and, Lo and behold, a folder called Activation of fonts with Extensis files! I moved their and the error message was gone!

  Thanks again P Spier and thanks to Adobe for these forums.

  Wayne

• iTunes gives error "the program can't start because CoreFoundation.dll is missing on your computer. Try reinstalling the program to fix this problem.

  I downloaded iTunes and when I restart my computer I got a message-

  "The program can't start because CoreFoundation.dll is missing on your computer. Try reinstalling the program to fix this problem.

  everything seems to work even the iTunes page but whenever I turn on my computer I get this message. I am running windows 7, 32 bit. I bought an Apple iPhone 3G and that is why I decided to download iTunes to create an account to get apps and music to my phone. I reinstalled iTunes and still get the message, any ideas on what I do not or should it please?

  Ignore the mention in the article following the Apple MobileMe support and uninstall iTunes (by following the instructions on the link where it tells you to uninstall 6 applications that iTunes installs) and restart then download and install iTunes again: http://support.apple.com/kb/TS2211

• I have Windows XP. Can I install a second hard drive which will act as an extension of my current hard drive?

  My computer is windows XP.   Can I install another drive hard 160 GB to work in connection with that that I have in it?

  original title: if I install a second drive to har to use as extension with windows Xp

  As long as your Windows XP partition is formatted NTFS, the answer is Yes.

  How to create and use NTFS mounted drives in Windows XP and Windows Server 2003
  http://support.Microsoft.com/kb/307889

  J W Stuart: http://www.pagestart.com

• The program cannot start because MSVCR80.dll is missing on your computer. Try reinstalling the program to fix this problem. Where can I get this program?

  Pop Up-

  The program cannot start because MSVCR80.dll is missing on your computer.

  Your response-
  Try reinstalling the program to fix this problem.
  Question-
  Where can I get this program to download?

  Hello

  If the problem is with iTunes, uninstall everything according to the instructions from Apple:

  «Remove and reinstall iTunes, QuickTime, and other software components for XP»

  http://support.Apple.com/kb/ht1925

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  "Resolution of problems with iTunes for Windows Update"

  https://discussions.Apple.com/docs/doc-6562

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  ____________________________________________

  If the problem is not with iTunes, there is other information about this error on the link pcsupport.

  See you soon.

• srvcli.dll, he said: "the program can't start because srvcli.dll is missing on your computer. Try reinstalling the program to fix this problem. and it happens with all of my programs, even when my computer comes on!

  So what the _ I do im plus and ready to blow a gasket that is this stupid file?

  Hi koryrage,

  (a) when this issue has produced?

  (b) don't you make changes to your machine before the problem?

  srvcli.dll linked statically to the following files:

  Msvcrt.dll
  ntdll.dll
  API-MS-Win-Core-LocalRegistry-L1-1-0.dll
  Rpcrt4.dll
  Kernel32.dll

  This means that when srvcli.dll is loaded, the files above are automatically loaded too. If one of these files is damaged or missing, srvcli.dll will not be loaded.

  Use the System File Checker tool (SFC.exe) to determine which file is causing the problem and then replace the file.

  Follow the steps in the link and check if that helps.
  http://support.Microsoft.com/kb/929833

  If the System File Checker tool does not resolve the issue, and the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time.

  The tool using System Restore may not necessarily help you determine the problem. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  1. in the System Restore dialog box, click on choose a different restore point and then click Next.

  2. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  3. click on finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Access the link.

  What is system restore ?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  Post back with the State.

  Aziz Nadeem - Microsoft Support

• "The program can't start because the OLEAUT32.dll file is missing from your computer. Try reinstalling the program to fix this problem.

  Someone knows how to fix this error keeps coming and stop loading applications?

  Hi DuaneXX,

  ·         You did changes to the computer before the show?

  ·         What programs do you speak?

  Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

• I can't download rumble fighter, I just took my computer windows 7 out of the box. He said: "the program can't start because MSVCR71.dll is missing on your computer. Try reinstalling the program to fix this problem.

  I have re installed where can I download MSVCR71.dll from /.

  Hi Needs_help,

  Welcome to the Microsoft Answers site.

  MSVCR71.dll is a Microsoft C Runtime Library file.

  Run the tool system file checker should help repair the file.

  To run the System File Checker tool, follow these steps:

  1. click Startand type cmd in the box start the search .

  2 right-click cmd in the programs list and then click run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click continue

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  Reference:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  After running the analysis, try to download the game once more. Must download this time successfully without difficulty.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• my personal hotspot will not die. How can I fix it? I have turn off in settings over and over again. I turned off the phone and rebooted. I changed my password hotspot. nothing seems to fix this problem

  my iphone 6 starts to turn itself automatically more and more. restart the phone did not help; change the password did not help; l ' turn off works for only a few seconds, then it turns itself back on. any suggestion would be appreciated. Thank you

  Check here > share your Internet connection with Personal Hotspot - Apple Support

• How can I fix "the program can't start because MSVCP110.dll is missing on your computer. Try reinstalling the program to fix this problem. "

  Hello.  I've been infected by a virus on my Windows 7 desktop.  After all the anti-malware/spyware and repair that I did, I now the above message.  How can I fix it?  Thank you!

  This is part of the redistributable Visual C++ 2012.

  You can download it from

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=30679

  If you have 32-bit Windows, install vcredist_x86.exe.

  If you have 64-bit Windows, install vcredist_x64.exe and vcredist_x86.exe.

• The error that says "this application has failed to start because sqlite3.dll (also sqlite3.prepare.v2) was not found. Reinstalling the application may fix this problem.

  These messages appear, one after another, at startup.

  Something you have running at Windows startup that uses SQLite is a failure. Find out what this program is (so you can stop it) by managing your Startup:

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  Important - do not use the System Configuration utility to stop the process. Use rather Start > Run > services.msc [Enter] and stop all services unless you really, really know what you're doing.

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx MS - MVP - Elephant Boy computers - Don ' t Panic!

• I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve the issues___Thanks__Peter

  I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve problems

  Thank you
  Peter

  Hello

  The easiest way is with a crossover cable - a special wire to connect the two systems.
  You can get one at your local computer store - they are not expensive.

  Also check with the site of the manufacturer of your router, because they will have in-depth details on how to
  set up the network.

  ====================================

  Or you can set up a wired or wireless network.

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Ad-hoc networking
  http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
  Set up a computer-to-computer (ad hoc) network
  http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspx

  How to set up an Ad Hoc wireless network in Windows Vista
  http://www.home-network-help.com/ad-hoc-wireless.html

  Create an ad hoc WiFi network secure on Windows Vista
  http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htm

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I have Windows 7 Edition home premium installed 32-bit update. How can I upgrade to 64-bit? Will there be problems of validation so I re-install from scratch?

  I have Windows 7 Edition home premium installed 32-bit update. How can I upgrade to 64-bit? Will there be problems of validation so I re-install from scratch?

  If you have purchased a retail package, it should include the disk for Windows 7 Home Premium 64-bit. Otherwise, you can download a backup copy at the following link and use the same product key that allows you to enable the 32-bit version. Its a possibility, you may need to reactivate by phone, see below for instructions:

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us