I have wireless internet in my house, and while others in my household have no problem, my internet connection keeps falling.

Similar Questions

• Went from "Windows Media" to "Windows XP SP3". Now, I get "Error Message 871122" trying to get a wireless Internet connection.

  Here are the facts:

  1. to have access to the internet with a direct line to router Ethernet ONLY, but no wireless connection.
  2. verified Harware for "Intel (r) PRO/Wireless 2915ABG Net" - WORKS FINE.
  3 drivers for the cards above, have most recent downloads - WORKS FINE.
  4 activated the 'USE WINDOWS TO CONFIGURE MY WIRELESS NETWORK SETTINGS' button on the tab 'network connections'.

  In fact... impossible to find the above until that earlier. What happened immediately, is that I no longer get the "ERROR MESSAGE to SEE the ARTICLE ID: 871122" message. And instead, I could FIND my network. He finally has shown Up! However...

  Now, I clicked on my network and click 'CONNECT' and his request now a WEP key to be entered twice.

  So, I just need to get this 'key' to my Service provider and punch in, and it should work? Well, I'll try tomorrow.

  Thank you.

  So I read the ID: 871122 Microsoft Article. But I can't always have to figure if I need some sort of 'Internet '.

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• I keep getting the 'Network security Key Mismatch' message when you try to connect using my wireless internet connection. I don't know that I use the password.

  I keep getting the 'Network security Key Mismatch' message when you try to connect using my wireless internet connection.  I don't know that I use the password.

  Hi oms1957

  I recommend you try these methods

  Method 1:

  Reset the wireless network and make sure that you set the level of security to WPA2-Personal, as it is recommended.

  Here are some links that will help you set up the wireless network

  What are the different wireless network security methods?

  Method 2:

  If this does not clear if installed third-party antivirus and then try to connect. If the problem is resolved, you have to uninstall the antivirus and reinstall back or check with the settings.

  Method 3:

  Cycle power to the router and check if this is useful.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to replace the missing wireless internet connection icon in the network connections?

  How to replace the missing wireless internet connection icon in the network connections?  My Windows XP installation from the CD on a replacement hard drive did not include this icon to connect to another successful install...

  Hello

  The following article might be useful: How to troubleshoot missing icons in Windows Server 2003 and Windows XP network connections
  http://support.Microsoft.com/kb/825826

• I'm trying to set up an ad - hoc network if I can use my laptop to share our wireless internet connection.

  I'm trying to set up an ad - hoc network if I can use my laptop to share our wireless internet connection. first time I tried, I managed to do this successfully. When I was through, I deleted the network connection. now, when I try the implementation of another, I get a "windows could not set up * network name." No matter what I change, the settings of the firewall market, I can't work. My laptop is connected to the internet through the LAN.

  I am running windows vista Home premium. Computer is Hp Pavilion dv6
  original title: try to set up an ad-hoc connection

  Hello

  Follow the suggestions from the link and check if it helps:

  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to" " "»

  http://support.Microsoft.com/kb/946481

  Reference: Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-computer-to-computer-ad-hoc-network

  Ad-hoc networking

  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

• Internet connection keeps dropping out

  Have laptop & modem wireless, but internet connection keeps dropping out.  Laptop on 10 m of modem. Providers of broadband & computer help tell their side of things works fine.  What should I do next.

  It's not just you that I had questions all night myself as well as others that I know online seems to be a problem with the server somewhere between.

• I have a problem of "Secure connection failed", access to an HTTPS site.

  I have a problem of "Secure connection failed", access to an HTTPS site. It is of this type:

  Your certificate contains the same serial number for another certificate issued by the certification authority. Please get a new certificate containing a unique serial number.
  

  (Error code: sec_error_reused_issuer_and_serial)

  OK, I have not read the support article carefully enough - it even says that this dialogue cannot be exceeded by adding an exception.
  you are most likely right that this problem arises because the same cert is used for different sites. this support article describes a work around, but it is probable, not applicable to your situation, since you would also have to remove the certification authority and which would create all sorts of problems as your production site will tend to choose an a valid CA certificate.

  Please contact your IT department or the problem of certificate on two different servers or to allow you to run a version of portable firefox where you can mess with the certificate store and the authorities of trust in order to access the test server.

• How can I get the ps3 game system to pick up a wireless internet connection, to a desktop computer in the same room?

  HP Desktop/Windows 7. Wireless Internet receives, of Linksys Wusb600n Adapter.Then for Playstation 3 wireless system?

  How can I get the ps3 game system to pick up wireless internet, a desktop computer in the same room, but the desktop computer is picking up wireless internet from a Linksys wusb600n adapter.and is a secure signal I have permission and the password of the neighbor. It is in the basement of the House and I can't access wefi for the coming thing only ps3.the is the usb cord pluged into the desktop. its for kids, any advice would be greatly appeaciated. Thank you

  You can use the wireless router but you cannot use pc as a wireless router.

  Upcoming ps3 games

• Wireless Internet connection problems

  Windows Vista Edition Family Premium 2007

  Studio XPS 1640

  CPU: Intel (r) Core (RM) Duo

  2.40 GHz

  4.00 GB

  64 bit

  I've had my computer for almost three years now and during that time, most of the parties on this matter have been replaced.

  More recently, I got both my hard drive and my card wireless replaced due to different problems and now it has developed recently that I can not connect to wireless internet. I live with my best friend, who also has a Dell laptop and I myself own an Acer Netbook and an iPhone, both of which successfully connect to wireless internet. It seems that my system that is having this problem.

  I spoke with representatives of Dell's Support more + 5 times and nothing has solved this problem. They simply tell me it's a software problem and I have to buy something System Repair for $100 + (even after having spend $600 on a warranty, which apparently doesn't cover that material).

  Obviously, I can connect to via an ethernet/cable connection, but not wireless. It's not that the connection is not displayed, it shows and said it connects, but I only have 'Local' go. This isn't the first problem I've had with my wireless; I got other errors such as: "the ability of this network adapter does not match the requirements of this network" or the connection will show, but that their will to be greyed out as if I don't get any kind of connectivity.

  If there is more information that I can give to make this easier to understand, please let me know. I'll post the Windows IP Configuration if necessary to help solve this problem.

  Short version:

  -New hard drive

  -New wireless card

  -New router

  -Other appliances in the House a wireless connection

  -Local only access

  -With the help of Google Chrome

  -No internet access

  "It may be a problem with one or more network adapters on this computer."

  "the ability of your network adapter does not match the requirements of this network.

  ==x==
  Microsoft Windows [Version 6.0.6002]

  Copyright (c) 2006 Microsoft Corporation.  All rights reserved.

  C:\Users\Vicki>ipconfig/all

  Windows IP configuration

  Name of the host...: Vicki-PC

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :

  ... Description: Intel(r) WiFi Link 5300 AGN

  Physical address.... : 00-21-6A-CB-2A-DC

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::6495:af89:6369:a83b % 14 (Preferred)

  Autoconfiguration IPv4 address. . : 169.254.168.59 (Preferred)

  ... Subnet mask: 255.255.0.0.

  ... Default gateway. :

  DHCPv6 IOOKING...: 234889578

  DHCPv6 DUID customer...: 00-01-00-01-15-92-53-F6-00-26-B9-25-26-60

  DNS servers: fec0:0:0:ffff:1 1%

  FEC0:0:0:FFFF:2 1%

  FEC0:0:0:FFFF:3 1%

  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :

  ... Description: Broadcom NetLink (TM) gigabit Ethernet

  Physical address.... : 00-26-B9-25-26-60

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: b 35 fe80::cdfc:8: a699:3f1% 11 (Preferred)

  IPv4 address: 192.168.0.8 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Thursday, June 30, 2011 23:21:38

  End of the lease...: Saturday, July 2, 2011 12:06:18 AM

  ... Default gateway. : 192.168.0.1.

  DHCP server...: 192.168.0.1.

  DHCPv6 IOOKING...: 251668153

  DHCPv6 DUID customer...: 00-01-00-01-15-92-53-F6-00-26-B9-25-26-60

  DNS servers...: 192.168.0.1.

  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {288F80BF-48FA-41D6-AA1F-0CE0A55ECA0F}:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft ISATAP adapter

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 7:

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 02-00-54-55-4E-01

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  IPv6 address...
  . : 2001:0:4137:9e76:146f:34 has 2: 3f57:fff7 (Pref
  made a mistake)
  Address IPv6 local link...: fe80::146f:34 has 2: 3f57:fff7% 10 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled
  Tunnel adapter isatap. {7CDECA56-C37F-4889-AEB0-5587199FDF00}:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  C:\Users\Vicki >
  C:\Users\Vicki >

  Hello

  Since the update of the driver did not work I would return the system back to factory
  as suggested in my response above. After the revision updated the WiFi driver again. If this
  does not work then it's material. If necessary, you can disable the built-in WiFi and
  use a device of WiFi add-on.

  I hope this helps.

• Satellite L300 - unable to get a wireless Internet connection

  EY you have some questions,

  Funny, is that I have my laptop 4 on lets say half a year. I had problems with my wireless connection, I tried 2 fix it, but really never been stable.

  But now I had a problem I've ever had before, can't get no Internet connection what so ever with my wireless connection, only time when I get a connection is
  When I put in the cable.

  Checked a lot of posts but nothing really worked, tried the FN + F8 verified and updated http://aps2.toshiba-tro.de/wlan/.
  Tried to update my Realtek RTL8187B wireless 802. 11b / g 54Mbps USB 2.0 network adapter, but he can't find anything on the net.

  Let me know what you guys think I should do.

  was soon Dupp

  Hello

  Well, you said that the Internet connection is working that with the cable so you have checked the settings wireless LAN on the router? WLAN is enabled on the router?
  In addition, you should try to update the firmware on your router.

  Also, make sure that you use the same WLAN settings than on your router. I mean the channel and speed (e.g. 802.11 g).

  You should also try to disable encryption on the router. Can you connect to the router then?

  Finally and most importantly, you use factory settings or you have installed another OS?

• Lose the wireless internet connection when it is not active

  Hello
  I have an annoying problem. IM losing my connection wireless internet access after a few minutes is not active... Well not according to the 'doctor' program - it shows no signs of a problem.

  Looking at the 'LAN' icon, I see he's trying to connect when I ask, for example, an update on the current site, but simply not turn on the blue bar.

  The only cure to get online is to update the connection.

  What I'm doing wrong here?

  Thanks in advance... Jens

  Hello Jens

  Please check the option sign-out after x... on your router. The sign-out feature is used to disconnect the router from your ISP automatically when there is no activity for a certain period of time. For example, place a check mark next to this option and enter 5 in the minute field will cause the router to disconnect from the Internet after 5 minutes of no activity from the Internet. This option should be used if you pay for your Internet service by the minute.

  Good bye

• Satellite L100 - connection problems with a wireless internet connection

  Hello

  I had some of my Satellite L100 connection problems to my sky wireless broadband connection. My laptop detects the connection and I have a bubble appears confirming that the wireless connection is connected. However, when I open internet explore it appears with 'cannot display the page'.

  Now, the wireless works with our other non-Toshiba laptop so I know that the connection is ok but it does not connect with my Satellite. Is there something I can do?

  Try reboot you the router. In many similar situations, it helps me.

• My wireless internet connections is said he limited the connection?

  I recently got my laptop fixed and information has been reset the origianal settings, I can not connect to the internet, as it is said there is "limited connection" and I'm not sure what my security key is exactly. Can you help me? Please

  Hello

  (1) what is the operating system that you use on the computer?
  (2) have you made changes on the computer?
  Security key is provided by the Internet service provider. If you don't have it or if you are not sure what is the security key, I suggest you contact your service provider for the key.
  Try the steps mentioned below to the limited connectivity:
  Method 1: Troubleshoot low wireless signal quality
  http://windowshelp.Microsoft.com/Windows/en-us/help/fbb50492-3623-450D-8fd5-92cc74fab0ae1033.mspx

  Method 2: I suggest you to download and install the last set of drivers for card network from the manufacturer's website.

  "Network connection problems" 
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  Let us know if this information was useful

• Abandonment of the wireless Internet connection when you use HP G62 PC with HDMI connector to a TV from Samsung LE40C580

  Although I have connected my laptop HP G62 to my Samsung LE40C580 TV via a HDMI 1 meter and everything worked OK. The wireless internet then falls after a few minutes. After removing the HDMI cable, internet reconnects. Could you please provide a solution? I have a wireless full power before and after the stall signal.

  Hello

  What version of the Windows operating system is installed on your computer?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the Internet Connection Troubleshooter and check if that helps.

  Follow the steps to run the Internet Connection Troubleshooter:

  Click the Start button, type Troubleshooting in the search box, and then click Troubleshooting. Under network and Internet, click connect to the Internet and run the troubleshooter.

  Method 2:

  Try to update the graphics driver and check if it helps.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Hope the information is useful.

• HP Pavilion 15-p239: wireless Internet connectivity

  Thought that I was buying a decent laptop and then once housed found real problems connecting to wireless internet. My broadband provider tells me (while trying very strong help) that:

  Hello

  Please use the following driver:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_134477_1

  Kind regards.