I installed a new video card GeForce 8400 RS in windows 7 and it will not update driver

Similar Questions

• Install the new video card

  I have a HP Pavilion m7500y PC running Windows XP. I would like to install a new video card to display on both monitors. Installing a video card is possible with this machine? The card I have has a VGA, HDMI and a DVI input connection. If possible, do I need anything special to install and use this card? Thank you for your help.

  I wouldn't worry the food until the video card is selected.  Decide if a new power supply is needed.  Many new cards high power have a 'special' which will have all the power supplies.  According to the map, adapters for power fittings may come with the card.  A respected power supply name is Cosair, Antec, or Thermalake, but many are just as reliable at the best prices.

• Windows blocked key after installing a new video card and hard drive.

  I got a copy of Windows 7 Ultimate 64 - bit edition since the early release, purchased through Newegg. Since then, I used it on my desktop, which I update regularly. I changed the hard drives, processors and cards video several times and reactivated without a problem, but this last Friday, I installed a new video card and the DSS, and when I went to activate windows told me that my key was blocked without any explanation. I can only assume that this is because I changed my hardware configuration. My copy of windows remained only on this computer over the years. Here are the results of MGADiag running on my system.

  If there is any question about the legitimacy of my copy, I have the DVD, booklet, cases, cardboard sleeve he shipped initially and purchase of invoices from Newegg on the spot.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - D8YP8 - 79HTV-2GFQT
  Windows product key hash: OHt9YSDSzhyPDA0DedmCR0Hfwj8 =
  Windows product ID: 00426-OEM-9154261-98225
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 6.1.7600.2.00010100.0.0.001
  ID: {6702320D-40F0-4FC3-A8FA-60775C31A418} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Ultimate
  Architecture: 0 x 00000009
  Build lab: 7600.win7_gdr.130104 - 1435
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {6702320D-40F0-4FC3-A8FA-60775C31A418}1.9.0027.06.1.7600.2.00010100.0.0.001x 64*-*-*-*-2GFQTS-1-5-21-605449622-1443938486-240076793900426-OEM-9154261-982253MICRO-STAR INTERNATIONAL CO., LTDMS-7577American Megatrends Inc.. V1.6 20090924000000.000000 + 00011B83607018400FA04090409Mountain Standard Time(GMT-07:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 Ultimate edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_NSLP
  Activation ID: cfb3e52c-d707-4861-af51-11b27ee6169c
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00426-00182-542-698225-02-1033-7600.0000-0742013
  Installation ID: 013213720201413403062894943331046813518366624835351974
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 2GFQT
  License status: initial grace period
  Time remaining: 38700 minute (s) on (26 day (s))
  Remaining Windows rearm count: 3
  Trust time: 18/03/2013 20:21:46

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 3:16:2013 05:01
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: OgAAAAEABgABAAEAAAADAAAAAgABAAEAln2G8G4eCIVU0Mj/jDUQM1TyRGN6mFKayIqLyP7M7AmOLg is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC 7577MS A7577100
  FACP 7577MS A7577100
  HPET 7577MS OEMHPET
  MCFG 7577MS OEMMCFG
  LASRYVITRAGE 7577MS A7577100
  SSDT A M I POWERNOW

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Impossible to use the system in sleep or Hibernate mode after installing a new video card

  Have a card GeForce 6200 graphics with latest drivers installed and now I can't use the features of standby or Hibernate mode in Windows Xp System.

  This seems straight - Stand By and Hibernate will usually be available if the video drivers are not updated.

  For your NVIDIA GeForce card, I would do this:

  The best way to reinstall the NVIDIA software is to visit the NVIDIA support web page and let your system and to recommend the best software for your system... or you can find the correct version of the software on their web page and download the latest package of video driver for your system software and install it yourself.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the link to the support page NVIDIA for the scan:
  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the GRAPHICS DRIVERS button to start the scan.

  Let online to take a look at your video system scanner them and see what he suggests for drivers and consider their analysis if they offer a new pilot.

  When you have done, you can add a fourth "Hibernate" button to your menu to shut down the computer to prevent you from pressing the Shift key to Hibernate (which is good for lazy people like me).

• HP Pavilion P7-1459 fails to start after installing a new video card

  I bought a GeForce GT 640 video card to put in my new HP Pavilion P7-1459, after checking the specs. The card requires a PCI-Express x 16 for Version 3.0 slot. Check, the HP Pavilion P7-1459 has one of those and all the other cards speca are well below systems.

  After uninstalling the ATI driver and withdrawal of the card Radeon 7450, I put the 640 TG in the PCI-Express slot and turn on the machine.  Fails it hard machine and the system does not start.

  I have already tested the card in another machine and it work very well, is not the card.

  Any ideas?

  Please check the minimum recommended configuration for the 640 GT power. Your computer has a 300 Watt power supply, and it seems that most cards of TG 640 recommend a 350 Watt power supply.

• Unable to adjust screen after installing a new video card.

  DesktopManager aktiviere

  Since I installed the video card that I can't set my screen
  where can I fined the Director of bureau to be activated

  Since I installed the video card that I can't set my screen
  where can I fined the Director of bureau to be activated

  Restarting the Office Manager...

  Start button > in the search box, type services.msc > press > scroll window... > click

  topic status, it should say... Has begun
  under Startup Type, it must be said... Automatic

  If not, left side, click on the word in color blue restartalso, right-click in the window... > properties...

  in startup type, click on the pointer, and then select Auto
  under Service status, click Start

  OK when finished.
  Services output window.

• my laptop won't go to the starting window to type my password so I am trying to install windows 7 and it will not be installed.

  my computer windows vista laptop will not go to the start menu to type my password

  You are doing a Windows 7 upgrade starting in a race and activation of Vista operating system.

  Try to repair Vista:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Case of failure of the foregoing:

  Reinstall Vista > and then upgrade to Windows 7.

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  "Download Windows 7 installed and activated on your PC."

  See you soon. Mick Murphy - Microsoft partner

• I have a new laptop with Windows 7 and it will not install a game of mine. It's Agatha Christie: Triple murder mystery Pack; requirements which are Windows 98/ME/2000/XP/Vista...how can I make it work?

  When I put the game, happens to the Setup screen, but when I click on install, it does not work... so I need a way to make it work... Please help me.

  Hi caecae1461,

  Welcome to the Microsoft Answers Forum!

  We would like to know, do you receive a correct error message or error code when it freezes?

  As the game is not also installed in the Compatibility Center, you can try to run the game in compatibility mode. Steps to follow:

  i. right click on the game (on the .exe file)

  II. click on properties

  III. click on the Compatibility tab

  IV. Select run this program in compatibility mode and select windows vista

  Below the link for reference: brand to run older programs in this version of Windows: http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• New HP ink instl had no error in the window, yellow and magenta will not print

  HP Officejet 6500. New HP ink cartridges installed successfully, no error message is displayed. Still yellow and magenta flow any color at all. Tried cleaning the sensor, does not. Not all troubleshooting on HP site referred only to 'error' messages, which I don't get.

  There is a document for the resolution of the problems of print quality in the HP 6500 Officjet. This document can be found here.

  Hope this helps to get your yellow and magenta works again.

• Windows Vista and 7 will not let me install XP

  It won't let me choose "install windows".

  [URL = http://img20.imageshack.us/i/capturetjs.jpg/] [IMG] http://img20.imageshack.us/img20/7503/capturetjs.jpg [line] [url]

  Uploaded ImageShack.us [url] with [URL = http://imageshack.us]

  You will have to start all over again if you want to install XP.

  Since vista and win 7 are later versions. You will need to reformat / make 3 partitions, install XP, Vista and Win 7. Or if you have Win 7 Pro or Ultimate use XP mode

• Installed windows 7 and windows live mail. now I want to import my messages from windows mail, and they will not matter. I really need the messages because they have a lot of important information in them.

  Would be really happy for any help.  The application tells me that they have been moved to the storage area, but they are not there.

  Help.

  Is your username mentioned in the tab security for storage files and all subfolders, and has 'full control '?

  If these files are really empty then the transfer/import routine failed for some unknown (to me) reason.

  Have you tried to copy all old messages from the Windows.old folder, put in a file in your user name for example Documents and then import from there?   It is perhaps necessary to remove to another location in the current storage folder in Windows Live Mail rather than simply delete before rerunning the import program.

  Have you tried to temporarily disable your anti program virus and other security programs to see if that blocks emails appear?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  First try checking not be (read-only) to see if it reports any problems file or hard drive.  If this is the case, start by checking the two boxes, in no other rerun.

  Have you tried to Support Windows Live Mail?
  https://support.live.com/eForm.aspx?ProductKey=wlmaildesktop&CT=eformts&scrx=1

  Try the Vista instructions in this article.

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222/#appliesTo

  How to uninstall Windows 7
  http://support.Microsoft.com/kb/971762

  How to restore a Windows 7 computer to a previous Windows installation by using the Windows.old folder
  http://support.Microsoft.com/kb/971760

• User does not appear in the XP start window after installing new video card and the extra memory. This option is to turn off count... safe mode does not help.

  Additional memory added, installed the new video card...
  Reboot a windows XP user name screen. any user identified.

  Can you achieve Alt + Ctrl + delete twice and connect with the classic login?

  -JW

• HP compaq dc5800 sff: install a new graphics card

  Hello

  I bought a 240 r7 radeon graphics card to upgrade my hp dc5800 sff, it is running on the q33 chipset from intel.

  How to install this new graphics card? I want to talk about the installation of the drivers, not the placement in the pc itself.

  I read somewhere that I first need to uninstall the drivers from the chipset, q33 before putting the card in my pc, is it true? If Yes, how should I do it OK?

  If not, can I just put it in the case, plug in my monitor inside and start the pc, then install the drivers from the disk?

  Thank you

  Hello

  It is very rare that the removal of the existing video driver is necessary before installing a new video card. Most video card manufacturers do not understand such a suggestion with instructions to install a new video card.

  However, if you still believe that you must work Yes, so that you can go through the program and features Control Panel to remove the video driver only. You can also use Driversweeper to clean up the video driver.  However, before removing the Chuck, make sure you have the original drivers downloaded to your desktop so that you don't have to hunt for him later if necessary.

  The AMD R7 240 does not yet in your PC according to the level of brand, model and vBIOS in the graphics card.  In addition, check power supply required for the 240 R7 which, from what I've read is 400 watts.

• Does not start after installing new video card

  Hello, I have a desktop H8-1284, and the video card went a few days ago. So I bought a video card Geforce GTX 650, and after installing the card and the computer starts, it hangs just at the start of the HP logo screen. So I put an old geforce 8800, and she starts without a problem. When I try the new card Geforce GTX 650, the same thing, just hangs at the splash screen.  I checked the bios and it doent seem to be something there that can help wouild. My diet is 460 w, and the new map needs of 400 w, any help will be greatly appreciated

  Hello

  Most of the cards PCI-E 3.0 are retro-compatible with the PCI-E 2.0 slots.  However, in order to get the PCI-E version 3, you must use a processor Ivy Bridge.  Look at these specificationsfor a typical NVIDIA GTX 650.

• New video card, what parts of the software should I install?

  Hello!

  I just built a new computer for a customer who is a photographer. For the best possible performance with the new video card NVIDIA GTX 760 and Photoshop CC, what elements of the software NVIDIA should I install, or even avoid? Or do I just install everything what it offers? This system will ONLY be used for retouching... no games, etc.

  Driver software of 344.11 displays the following:

  Graphics driver (Duh)

  3D Vision controller driver

  Pilot 3D Vision

  HD Audio Driver

  Miracast virtual Audio

  NVIDIA GeForce experience

  PhysX System Software

  Thank you very much for your help!

  Gregg Hill

  I installed everything except the "NVIDIA GeForce Experience" element.

  I put the computer today, and my client will get loaded and tested PS later today. She should be happy!

  Thank you very much for your answers.

  Gregg