My Toshiba will not find network connections

Similar Questions

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• local station changed the broadcast signal THAT WMC will not find.

  MY frequency changed from local station cbs always on same channel 2.1 & 2.2 windows media center will not find the new frequency. they appear very hard on my tv tuner.

  http://www.hack7mc.com/2009/01/manually-adding-ClearQAM-channels-to.html pourrait
  Help.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Creative cloud says "disconnected" but will not let me connect. Tried all solutions on the login page errors creative cloud 3.

  Creative cloud tells me I am disconnected and will not let me connect. I tried quiting and restarting the program. I tried to configure the automatic detection of the local network settings. I also tried to delete the opm.db. Still does not work.

  Hello

  You can refer to the Thread -: error "You have been disconnected" whenever I try to connect to the creative desktop application cloud

  Also try:- cloud creative connection errors

  Hope this helps!

• I've updated to Firefox 8, now, it will not keep Me connected to all the sites!

  Everything was beautiful and brilliant. Then I updated to Firefox 8. Now any website I want to (Amazon, Facebook, Twitter, etc.) will not keep me connected when I check the box to do so. As soon as I close Firefox and reopen it, I have to log in again, even if on some sites it's to remember my username and password (just do not keep me logged).

  I tried to delete all cookies and history and still nothing.

  Does anyone else have this problem?

  In the privacy section of the Firefox options, make sure that Firefox is configured to accept cookies and that it is not set to clear history of Firefox closing.

  (If you use the default "Remember history" then it should work fine. If you use the "customized for the history settings" setting, and then make sure that "Accept cookies" is checked and "clear history of Firefox closing is not checked.)

• Satellite L300 will not let me connect

  My Satellite L300 will not let me connect unless I'm in safe mode and when I go to advanced options it just comes up with a blue screen

  Help!

  Who knows what's the problem here?
  Maybe you should install new OS. You can enter boot options using F8 at startup?

  Repair my computer option is available?

• Apple TV will not maintain a connection with my Samsung

  Apple TV will not maintain a connection with my Samsung TV UHD.  All other devices work well with it.  I tried switching ports HDMI and cables without change.  Apple TV can turn on and turn off, plug in for 10 seconds, or not at all.  (Note: Apple TV is still in install mode, because it does not appear long enough to complete the process.)

  HELP, PLEASE.

  Which TV model you have?

• I will not let me connect to my main, connect you to where I put my password in and then logs on just continuous vista startup repair in time ever I start my computer

  I will not let me connect to my main, connect you to where I put my password in and then logs on just continuous vista startup repair in time ever I start my computer

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Connection problem: trying to connect to my computer at the title of the administrator, but after I put my login in it goes to check on the page and will not let me connect

  Try to connect to my computer as the administrator, but after I put my login in it goes to check on the page and will not let me connect. The regular connection for the computer works fine.  Any ideas?

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It is the instance of Vista installation.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  Adjust settings, manage user accounts.

  Try the Forum above to repost, if necessary.

  See you soon.

  Mick Murphy - Microsoft partner

• the transfer will not find my user account

  My XP workstation has my profile with a dot in the name such as "user.systemname".

  Easy transfer will not find this user account.  I was trying to rename the profile, but the system won't let me not renaming the directory that I do not have enough permissions or something is in use.

  How can I get an easy transfer to recognize a profile with a dot in the name?

  Like Windows 7...

  Create a new user account and transfer your files and settings to the new account.

  See: http://fredcoulson.com/blog/fred/index.php/2007/08/15/renaming-your-windows-xp-user-account/

  Note: The easy transfer will not migrate type .dat and .tmp files

  J W Stuart: http://www.pagestart.com

  If that were the case, might as well the user simply copy the content of the personal folder under C:\Documents & Settings of an external hard drive.

  Question is the part of a domain user account? If so, that may be why he won't let you rename (without permission).

  If you are, I recommend the UN machine in the domain join then rename the account.

• My Windows 7 computer will not find the networks wireless after a system restore.

  My Windows 7 computer is not find wireless networks after I did a system restore. It was perfectly good wifi before the system restore and other members of my family have a great connection except me is not a problem with my router. I think I know what the problem is, but I just don't know how to fix it. So there you go. I did my restore system about 2 days after that we moved on the provider of internet/tv "Comcast" to the tv/internet provider "Verizon". what I think has happened, is that I restored my computer to the point when we had no Verizon so that he could not find the network. Now, since we have Comcast it won't identify this network either, so maybe some of you out there could help me. : D

  Hello Nicolas,.

  Thank you our writing about Microsoft Community.

  If your computer has a wireless network card, Windows will automatically detect the networks wireless in range of your computer.

  You may encounter network or problems of Internet in Windows for several reasons.  Some common problems that can cause these problems are:

  • A wireless network adapter switch that is not enabled

  • WEP, WPA, or WPA2 key or password security issues

  • Cables that are not connected correctly

  • Corrupt or incompatible drivers

  • Missing updates

  • Network connection settings

  • Hardware or software problems

  I would ask you to check out the troubleshooting steps provided in the articles below and check if they help you solve the issue.

  Why can't I find a wireless network?

  Wireless and wired network problems

  Here are some links to site Web de Support of Comcast, who talk about troubleshooting of XFINITY Internet connectivity issues.

  XFINITY TV App: Can't detect your XFINITY home network

  The problems of XFINITY Internet connectivity

  Hope the helps of information provided. Do we know the State of the question, so that we can help you further.

  Thank you.

• XP sp2 can not find networks (wifi) also connect to the internet. No problem with router as Vista works fine

  my old machine is broken down and wiped xp sp2 off the drive. I fitted another harddrive and reinstalled from xp disc. Installation was bad, so bought a new drive, the Installation went like in a dream, but my computer cannot find all the networks. The wifi dongle works ok (tested on vista) the router isworking well on my vista machine (find 7 networks) parameters must be wrong or the new installation was not so good Mmm tried to reinstall 4 times with the same result.

  Hello

   

  Thanks for asking!

   

  You can't connect to the internet.

   

  1. do you receive any error messages?

  2 what is brand and model computer?

   

  The question may be because the network drivers.

   

  To check that I suggest to visit:

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

   

• my laptop will not find my wireless network when I'm trying to relog. I then reboot the computer to make it work

  I can be on my laptop and the internet works fine, but if I close my laptop and come back, sometimes it will not open a session. When I try to connect to a wireless network, it will appear not all networks at all and I live in a condo and I usually pick mine as well as a dozen other choices. The laptop won't restart when I try to shut down or restart, it just goes in the part of the judgment of the process, but goes no further. I have to manually hold the power button to shut down the computer.

  Hello

  Maybe this can help.

  Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------

  Still a problem?

  Check support for the router and make sure that your using the latest firmware for the router.

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  If the support site has a newer version of the drivers and installed current ask drivers the most up-to-date drivers use this method.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

• Network management problem, computer laptop Windows 7 will not find other computers on any network, however all other computers on the network can access Windows 7 laptop.

  Basically, the issue I'm having is that my laptop does not connect to any other computer to access the actions or other files.  Other computers on the network can access my computer laptop shares and files without any problems.  Operating system is Windows 7 Home Premium x 64.

  What I tried:

  restarted
  uninstalling and reinstalling the files and printers, sharing maps and restart after completion
  all disabled firewall
  tried with IPv6 enabled and disabled without change, so it is currently enabled
  tried on a Wi - Fi and the differences are listed below in the section work (work is wireless)
  able to ping other comptuers
  access to other computers is permitted by other computers

  problem extends over several networks, IE I noticed it at home last night and the followed problem my laptop at work this morning.
  The problem is slightly different on the two sites.

  At home:
  I can see the other computers on the network, but I am unable to access it, even if I have permission, but other computers can access to my laptop.

  At work:
  Cannot even find other computers on the network but they can find and access my laptop.

  I have worked on this problem of non stop for several hours and did much more than what is said, but I am unable to remember everything.  I should have been taking notes: P

  Here are the results of the ipconfig/all command (I removed the physical addresses for security reasons):

  Windows IP configuration

  Name of the host...: Radiation-G72
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : hsd1.ga.comcast.net.
  Description...: Realtek PCIe GBE Family Controller
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR928X Wireless Network adapt
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::f4e3:cd1c:6952:eb4d % 11 (Preferred)
  IPv4 address: 192.168.2.7 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Thursday, February 4, 2010 10:50:32
  End of the lease...: Friday, February 5, 2010 08:29:36
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DHCPv6 IOOKING...: 234890707
  DHCPv6 DUID customer...: 00-01-00-01-12-4C-6E-91-00-25-D3-3D-FC-9A
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {1797D168-6FC8-4DDF-8338-4E214119C26D}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:4137:9e74:4ea:2920:b81a:cdc5 (Preferred)
  Address IPv6 local link...: fe80::4ea:2920:b81a:cdc5% 13 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Card adapt 6TO4 tunnel:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Asked this question in the Windows 7 forum also because the problem was between windows 7 and Vista.

  Hello

  If it has started, you can try a system restore - an update "might" have caused the problem.

  1. try a system restore back to a point before that happened. And immediately thereafter enter
  Control Panel - Windows updates - top left settings and set it to download and informs you instead
  Automatic. Leave it until you are sure that everything is OK and then you can add them one at a time
  to troubleshoot BUT click right on and HIDE all the driver updates. Also stop at day of drivers like below
  and let this value - manually search for drivers when you think you need. (See how and why to)
  stop day of drivers below.)

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  To uninstall an update if you determine that there are problems - Panel - updated Windows - down left-
  Updates installed - uninstall

  I had completely forgotten the system restore!  While looking into the system restore, I found that when I moved into my new House and has cable Internet installed, the cable technology installed a program of comcast on my computer.  This caused me to not be able to connect with other computers.  After rolling back to install it before it works!   Thank you.

• Satellite A105-4114 will not recognize the connection to the local network

  Whenever I plug my cable ethernet to ethernet port on my laptop, the ethernet port does not recognize my cable, even if the lights are flashing. I updated my LAN driver a week ago, and it has not really helped. My internet service is provided by my apartment complex at the school, but I don't think it has anything to do with it, because I had this problem last year living in dorms and at home. I have to restart my computer everytime for my computer to recognize the connection to the local network. Can someone help me please?

  Driver: Intel (r) PRO/1000 PL Network Connection

  Wireless connection works fune.

  Hello

  First of all, you should check your LAN cable.
  Sometimes the laptop may not be correctly connected to the LAN as a result of a defective cable.
  In addition, you should check if the network card is properly recognized in Device Manager. He should t be a yellow exclamation!
  In addition, you must check the settings for the TCP/IP protocol in the LAN card properties.
  TCP/IP must be set to automatic. I assume that you are connected to a server and the server supports supported a range of IP addresses and assigns it automatically.

  Last but not least check if you are using the latest version of the BIOS.

  Welcome them