I have a linksys wireless router and cannot get a full connection, I get the message - 'limited', or that the network keys do not match the linksys network who am I'm not fair?

Similar Questions

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• cannot get the keyboard to select windows xp when I have only four seconds to select is stuck on windows xp professional and cannot get the keyboard to use arrows to select

  cannot get the keyboard works when reebooting said cd I need driver sata when reebooting he gives four seconds to schrol up to windows xp but the line is highlighted on a windows xp profesional bellows and can't seem to choose windows xp on its own keyboard wont respond but lights from F1 or f2 f3 until f12 choose please help

  A few old machines will not recognize a USB keyboard/mouse until after Windows starts.  Look at the back of your computer and see if you have a PS/2 (round) connector for a keyboard and a mouse.  If you do, then you will need to use a keyboard with a round PS/2 connector or a USB-to-PS/2 adapter and plug the PS/2 connector on the back of your computer so that it recognizes the keyboard until Windows starts on your keyboard.

  The SATA driver applies to your hard drive.  A CD of start-up/installation of Windows XP does not recognize a SATA hard drive.  If you install Windows, you will need to hit F6 at the right time and insert a floppy with the SATA driver on this subject.

  HTH,
  JW

• Installs the modem and the router and cannot get it to work?

  Recently, I disconnected and then reconnected my computer laptop Windows 7 and XP desktop to a Linksys router that connects to a cable modem Webstar. I did 4 or 5 times in the past with no problems.
  Two computers can connect with success directly to the modem. When it is connected through the router, they appear connected (i.e. connected to the local network) but cannot access the internet. I tried to switch, reset etc... checked the cables, without success.

  I tried a second router (Belkin Wireless G) I also used before, but get the same result. I appear connected but cannot access the internet, even if I can connect my laptop to other nearby wireless networks.

  If I try to connect from the network schematic page in Windows 7 it tries to connect using a PPPOE (no matter who is and gets a 651 error.

  I tried all the MS diagnosis/troubleshooting software available on Windows 7 but cannot id the problem.

  This should be simple, but I'm out of ideas. Any help would be greatly appreciated.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• I have windows 7 64 bit and cannot get my search running index.

  I tried option evey on every thread here, and search for google, including the verification of registry keys, checking and unchecking options based on windows, etc, etc, etc...  When I click I have no tab file types that everyone refers to advanced options, also cannot use the change because it is grayed out, please help?  Have also tried to create the new user account and get the same results.  I'm at my wits end!

  Hi patricelaurence,

  Thanks for posting the question on Microsoft Community Forums.
  Description of the question, we understand that this index does not.
  We will try to help you solve the problem.
   
  Here are some steps that you can follow:
   
  Method 1:
  Open the troubleshooter for search and indexing
  See the link below:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter
   
  Method 2:
  We recommend that you perform the clean boot.
  Put your boot system helps determine if third-party applications or startup items are causing the problem.
  Consult the following link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See "How to reset the computer to start as usual after a clean boot troubleshooting"
  under more information to prepare the computer to start as usual after a repair.
   
  Method 3:
  Try disabling the security on your computer program and check whether the problem is resolved.
  See the link below for assistance:
  http://Windows.Microsoft.com/en-in/Windows7/disable-antivirus-software
  Note: After checking the question you must reactivate the security on your computer program.
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
   
  Hope this solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.

• Having trouble getting lists of reading is displayed on my iphone. I have already implemented the Division of the family and you can see the playlist on my other Mac (I have 2). Also, I have 2 iphones and cannot get the playlists will appear on the other.

  I have 2 macs. Let's call them A and B.

  Every Mac has an iPhone.

  I want to share playlists on A Mac with iPhone attached to Mac B and did not

  I have enabled the sharing of family and you can see the playlists of A Mac on Mac B

  Were unable have them appear on the iPad or the iPhone connected to the Mac B

  Have managed to see the playlists on the iphone connected to A Mac

  https://www.Apple.com/support/homesharing/getstarted/

  Read the guide carefully first.

  Then, make sure you have the same Homeshaing account (Apple ID) entered A and b.

  Enable sharing with in the preferences.

  Each library should appear and look like an icon 'home' in the top left area of iTunes (on both A & B).

  Select the library that has the playlist. Once the loading of the library, select the playlist view.

  Select the playlist that you want to import.

  Choose the area «...» "with your mouse and select"import playlist ".

  The playlist must synchronize with the goal of Mac. Under the iPhone sync settings, choose the playlist you just imported, and then press 'sync '.

• I bought 5 Fusion pro and cannot get the VMware Tools to install

  Bought a new iMac and bought Fusion 5 Pro.  I have a 5 year old and reclassified iMac Fusion 4-5 fusion and had no problems.  The new computer is for my wife and I tried and tried to migrate the laptop and it failed every time.  So, I did a clean install of Windows 7 and before I downloaded everything that I installed VMWare Tools.  For the past 2 days, I was passage of the files from the laptop and install programs that she had on the laptop.  Problems with Word and excel as they sit a spin.  Money went to re - install VMware Tools and it launches the installation program and then comes up with an error message... Error 1606: Could Not Access Network Location \\<host>\users\administrator\my documents

  Went into Windows to uninstall VMware tools and he started the uninstall program then stopped and got the same message.  I can not uninstall tools and cannot re - install the tools.  I need help to solve this problem.  I'm a guy of plug-and-play and if there is code to do, in my opinion, I'm sunk.

  Anyone have any ideas on how to solve this problem, so I can get up and go?

  Extra solution after Woodys - please check if mirror folder is enabled or not, if it is enabled, please disable it then try to reinstall the tools.

• Would never be able to stop or restart the computer in the menu after the 10.11.5 update and cannot get the 10.11.6 because iMac restart

  After the 10.11.5 update, that I could never restart or shut down my iMac (late 2013, 3.2 GHz Intel Core i5, 8 GB 1600 MHz DDR3) using the new menu. I can only stop it by pressing the button for a few seconds. I saw a few discussions addressing the question here and have tried to implement some of the solutions proposed, such as restarting in safe mode, deleting the application from Wacom-, but nothing has worked. Now I can't get the 10.11.6 updating or update my Adobe Creative cloud, incidentally, which became available to me, because I can't restart the computer. Do you know if this update would be better and solve the problem? Is there a way I can get this update even if I cannot restart the computer, or even to restore the system to an earlier version?

  Perhaps run EtreCheck and post the results here.

• I have a Toshiba satellite l300 and I get the BSOD

  the blue screen of death keeps appearing on my computer vista laptop windows of sisters and I tried safe mode, safe mode with network, start repair and they come all worms upward with the error codes different from the one that appears at startup is 0 x 000008086 or something like it's blinking just a way can get it back? I have not the original disk and the model of laptop is no longer supported so I can't get the bootable disks and when I start it up normally, it loads for a while then the screen stays black a little and then the mouse appears but it's still a black screen then the BSOD comes up with * STOP: 0 x 00008086 (0x00000000 0x00000000, 0 x 00000. 0x00000000) and the warranty has passed and that the insurance ran out is if there is something I can do or all the discs I can get? Thank you

  Hello

  1. are you able to boot to the desktop in safe mode or safe mode with networking?
  2. don't you make changes to the computer before the show?

  Method 1
  I suggest you try the steps from the following link:

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Method 2
  I suggest you to run the disk check.

  Check your hard drive for errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Method 3
  If the steps above fail, then I suggest allows you to perform system restore Win RE mode using Windows vista disk.

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Note: Installation sometimes a driver or a program can make Windows run slowly or erratically. System Restore can return programs and system files from your PC to a time where everything worked, potentially prevent hours of troubleshooting of headaches. This will not affect your documents, images or other data.

• Purchased from Microsoft Genuine = line and cannot get the key?

  I was surfing the net and told my software could be counterfeited and click here to fix... I ended up paying 117.00 for bad software, I called back as soon as I couldn't get the key, they gave me. and no one knew what I was talking about! I was on the phone for 3 hours! first tech support then microsoft store then back to technical support... I'm so frustrated! initially they sent me the key to download, but for some reason the e-mail has been removed, (Murphys Law) all how I received the diskette by post and downloaded to change my operating system win 7 ultimate for XP Home, now. but after installation it asked for the key? I don't have the key and does not come with the disc just a letter thanking me for buying and tell me to get the key from the email they sent me... I do not HAVE email, it has been deleted... What can I do? I'm lost... when I called microsoft they asked me my e-mail address to look up and they said there is no record that the e-mail... How can this be >? Please help me.

  You have been bitten by a crook.

  J W Stuart: http://www.pagestart.com

• Had to reinstall Adobe Acrobat Pro on new PC because the former has failed - now I get incorrect serial number and cannot get the program to run

  One of my PCs is failed.  Had me hard drive replaced.  Now cannot get Adobe Acrobat to run - continues to give me the serial number incorrect message.  Cannot get someone via live chat.  Does that keep me running in a loop to get more information, again and again.  Help/support stinks.  I just want to know if I can get a correct serial number

  Hey jat0,

  You will have to contact or team contact customer support on Monday, they will be able to check the serial key & help you after this fixed number.

  Kind regards
  Nicos

• Can not find themes on Services in Vista and cannot get the Aero theme / Malaware disables security Essentails and Windows Firewall

  Last night I tried to get rid of the svchost.exe virus that caused my computer to find me strange sites that I don't want to watch, eat all of my RAM 3GBs off the coast. Caused Windows Security Essentials not to start, same with the firewall. Last night I turned off a lot of favors and themes are included and brought me to change to classic. In themes under customization showed the classic themes and high contrast. He cannot see services! Can you guys can help me to get back on my aero theme and security services working again?

  Specifications of the PC:
  HARD DRIVE 320 GB
  AMD Althon X 2 7550 Dual Core processor 2.50 GHz
  3 GB Ram DDR3
  AMD Radeon HD 6570 1 GB GDDR3
  Hi Neal,

  After going through the newspapers of the SFC scan, it says that all the files were repaired successfully.

   
   
  Reset the default themes and check registry entry then.
   
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
   
  322756 how to back up and restore the registry in Windows
   
   
  a. Click Start, type Notepad and press ENTER.
   
  (b) copy and paste the following into it.
   
   
  Windows Registry Editor Version 5.00
  [- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Themes]
  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Themes]
  "DisplayName"="themes".
  "Group"="ProfSvc_Group."
  "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
  74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.
  00,76,00,63,00,68,00, 6f, 00, 73, 00, 74, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 20, 00, 2d, 00,------.
  6 b, 20, 00, 00, 6F, 00, 65, 00, 74, 00, 73, 00, 76, 00, 63, 00, 73, 00, 00, 00
  'Description"="@%SystemRoot%\\System32\\shsvcs.dll,-8193 '.
  "LocalSystem ObjectName"=""
  "ErrorControl" = DWORD: 00000001
  "Start" =: 00000002
  'Type' = dword:00000020
  "FailureActions" = hex: 80, 51, 01, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.
  00,01,00,00,00,60, EE, 00, 00, 01, 00, 00, 00, 60, ea, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00
  "RequiredPrivileges" = hex (7): 53, 00, 65, 00, 41, 00, 73, 00, 73, 00, 69, 00, 67, 00, 6F, 00, 50,.
  00,72,00,69,00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00, 6 b, 65, 00, 00, 6F, 00, 50, 00,------.
  72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 44, 00, 65,.
  00,62,00,75,00,67,00,50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00,------.
  00,00,53,00,65,00,49,00, 6 d, 00, 70, 00, 65, 00, 72, 00, 73, 00, 6f, 00, 6F, 00, 00, 61, 74,------.
  00,65,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 00, 00
  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Themes\Parameters]
  'ServiceMain '=' ThemeServiceMain. '
  "ServiceDllUnloadOnStop" = DWORD: 00000001
  "ServiceDll" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f,
  00,74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00,------.
  73,00,68,00,73,00,76,00,63,00,73,00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00, 00
  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Themes\Enum]
  "0" = "Root\\LEGACY_THEMES\\0000."
  "Count" = DWORD: 00000001
  "NextInstance" = DWORD: 00000001
   
   
  c. click file and then click record under.
   
  d. set the Save as type to all files.
   
  (e) the value of the file name themes.reg , then save the file.
   
  f. close the Notepad.
   
  g
  . go to the location where you saved the file, double-click it and merge into the registry.

  h. restart the computer and check for the issue.

• I have locked my hard drive and now get this message: D is not accessible access is denied.

  drive hard access denied

  I put the password on my hard drive in windows 7, then I deleted windows 7 and installed windows vista but now when I try to open locked hard drive he said D is not accessible access denied, what should I please help

  Delete all partitions "including the small 100 MB system reserved partition' can install Vista.

  -Partition management utilities-

  Partition Wizard Home Edition: (use the bootable CD version)
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, Format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To run any task (such as deleting a partition) use the "Pending Operations" box at the bottom left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  J W Stuart: http://www.pagestart.com

• I have 8.0.1 upgrade and still get the message not on the current version.

  None Show also in downloads. Is there a 8.0.1(1) version?

  If you use http://www.google.com/firefox then it is an old default home page is no longer used, and Google has not updated. Ignore the message or use a different homepage.