I just got an older presario v2000. need help to find drivers...

I know where to find the drivers, the problem is, I can't find a V2000 anywhere. Is there another way to find the specific model number? Even on the bottom on the sticker it says V2000, but on the list of drivers, they all have an additional letter or two after the part "V2000". Any help greatly apprieciated.

Hello

The numbers before the hash are you just enter on the HP's Web Site - see the link below for your laptop.

http://h10025.www1.HP.com/ewfrf/wc/product?product=1816345&LC=en&cc=us&DLC=en&task=&lang=en&cc=us

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • Just got a Palm m505 and need help

    Hello

    I just got a Palm m505, which didn't come with a manual and have never used a Palm tree (very excited im fine) and have a few questions. I downloaded the manual that answers a few questions, but I'm still not sure about certain things.  Given that I bought from someone else, that I was wondering if I use the reset on the back it will just bring it back to its default settings or it will erase somethings I need and in turn will have to reload something on this subject?

    I also downloaded the Palm software 4.1.4 to my computer - I have Windows 2000 - is that correct?

    They gave me the cables to connect the docking to the outlet as well as the computer... is there another piece of hardware I'm missing or is this what I need?  The Lady spoke briefly to my boyfriend and she told him that he had to get something else, but he can't remember what she said. If I use it for the basic functions are there any other basic hardware components im missing?

    I know that these are just issues, but I appreciate the help, advice would be appreciated.

    By pressing the reset button will perform a "Soft Reset".  This will not delete the device, but it restarts just (as your computer when you turn it on, then on it).

    If you want to erase and do like 'all new', then you will need to perform a "Hard Reset".

    To perform a hard reset: (Palm Knowledgebase article #887)

    By now the power down button, press on and release the Reset button on the back and continue to press the Power button. When the gray Palm logo is displayed, you can release the Power button.

    You should now see the warning in 5 languages page. Press the direction upward on the 5-way keypad to perform the task. The Palm restarts several times as it re - install the original programs and erases all data from your previous.

    This erases all other programs that were installed to it.  The installation disk supplied with the unit has several programs that can be installed on the device.  If one of them is that now, when you do the Hard Reset they will be gone and will require the drive to bring back.

    Looks like you have everything you need - Palm Desktop, the cradle and power supply for the cradle.  One piece of hardware that you can use is a SD card for extra memory.  It is not necessary, but very convenient to have to add more programs to the device.

    Enjoy your Palm!

    WyreNut

    Message relates to: Centro (AT & T)

  • Compaq Presario v2000 need help for recovery

    Hello

    I recently got a virus on my laptop, and I am not able to get off at the stop. I just want to remove my computer laptop everything and restore the operating system. The Virus has disabled the start menu, and I have no recovery discs. Help would be amazing!

    I don't know if I've got some records or not, I will check! If this isn't the case, I will call HP, thanks!

  • I just got a new computer and need help to reinstall Lightroom

    I need to re install lightroom to my new computer, how can I do?

    It may depend on which version you need to install.  Here are the links for the licensed versions.

    Lightroom - all versions

    Windows

    http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

    Mac

    http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

    If it's a cloud of importance then you...

    Download/install the desktop application, connect and install applications subscription.

    https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

  • Hi, I just got adobe dc and the need to edit a file, I have to open a file through adobe dc, and if so how to configure it for it?

    Hi, I just got adobe dc and the need to edit a file, I have to open a file through adobe dc, and if so how to configure it for it?

    Hi michaelk66089044,

    You can open it from Adobe Acrobat DC application on the file menu > open. If you did request by default option to open the PDF, you can directly click on PDF.

    You can also right click on PDF and select open in Adobe Acrobat DC

    For help on PDF edition, please see this KB doc: using Acrobat | Edit PDF files

    Let us know if you need help.

    Kind regards

    Meenakshi

  • I JUST DOWNLOAD THE CC ON MY DESKTOP N HAVE NO IDEA WHERE TO START PHOTO EDITING IT S LITTLE DIFFERENT OF MY ITEM 12 NEED HELP TO FIND THE TUTORIAL THANK YOU A.S.A.P.

    I JUST DOWNLOAD THE CC ON MY DESKTOP N HAVE NO IDEA WHERE TO START PHOTO EDITING IT S LITTLE DIFFERENT OF MY ITEM 12 NEED HELP TO FIND THE TUTORIAL THANK YOU A.S.A.P.

    Start with the tutorials in the Welcome window to start and takes a course from a site like Lynda.com.

  • I just got a new computer and I can't find my lightroom license key. How can I get a new one?

    I just got a new computer and I can't find my lightroom license key. How can I get a new one?

    Thank you!

  • Need help to find bosses and leaders out there

    Hi all

    I need help to find patterns, but also the number of occurrences of these models in the data in the column of the table.

    Consider the examples of data - column of a row in a table:

    'S-S-S-P-S-B-S-S-C-S-P '.

    My requirement is:

    I should get all the models that are followed is "."

    For example, the foregoing, given given bosses and Auditors are
    SS - count is 3
    SP - count is 2
    SB - 1 is
    SS - count is 1

    There is a condition most the above requirement:

    If' is followed by 'A', then 'SA' is not as a model. The model must stretch until a character no 'A' is found.

    Consider the sample data for the above case:

    'S-S-A-S-S-A-A-C-S-P-S-A '.

    previously given given bosses and Auditors are
    SS - count is 2
    SP - count is 1
    SAS - count is 1
    SAAC - count is 1

    The column data is stored as type VARCHAR2.

    I have Oracle Database 11 g Enterprise Edition Release 11.1.0.6.0 - 64 bit Production

    Thanks in advance,
    Girish G

    Hi, Girish,

    Girish G wrote:
    Hi all

    I need help to find patterns, but also the number of occurrences of these models in the data in the column of the table.

    Consider the examples of data - column of a row in a table:

    'S-S-S-P-S-B-S-S-C-S-P '.

    My requirement is:

    I should get all the models that are followed is "."

    Do you mean "I should get all the models who * begin by * of '?

    For example, the foregoing, given given bosses and Auditors are
    SS - count is 3
    SP - count is 2
    SB - 1 is
    SS - count is 1

    Why are there two production lines for "SS"? The other, with count = 1, mean doing just that?

    There is a condition most the above requirement:

    If' is followed by 'A', then 'SA' is not as a model. The model must stretch until a character no 'A' is found.

    Consider the sample data for the above case:

    'S-S-A-S-S-A-A-C-S-P-S-A '.

    previously given given bosses and Auditors are
    SS - count is 2
    SP - count is 1
    SAS - count is 1
    SAAC - count is 1

    The column data is stored as type VARCHAR2.

    I have Oracle Database 11 g Enterprise Edition Release 11.1.0.6.0 - 64 bit Production

    Thank you; version information are very useful.

    Thanks in advance,
    Girish G

    Whenever you have a question, please post a small example of data (CREATE TABLE and INSERT statements) and the results desired from these data.
    For example, the sample data may be:

    CREATE TABLE     table_x
    (       x_id     NUMBER     PRIMARY KEY
    ,     txt     VARCHAR2 (30)
    );
    
    INSERT INTO table_x (x_id, txt) VALUES (1, 'S-S-S-P-S-B-S-S-C-S-P');
    INSERT INTO table_x (x_id, txt) VALUES (2, 'S-S-A-S-S-A-A-C-S-P-S-A');
    

    and the results desired from these data can be:

    X_ID TXT                       PATTERN                          CNT
    ---- ------------------------- ------------------------- ----------
       1 S-S-S-P-S-B-S-S-C-S-P     SB                                 1
       1 S-S-S-P-S-B-S-S-C-S-P     SC                                 1
       1 S-S-S-P-S-B-S-S-C-S-P     SP                                 2
       1 S-S-S-P-S-B-S-S-C-S-P     SS                                 3
    
       2 S-S-A-S-S-A-A-C-S-P-S-A   SAAC                               1
       2 S-S-A-S-S-A-A-C-S-P-S-A   SAS                                1
       2 S-S-A-S-S-A-A-C-S-P-S-A   SP                                 1
       2 S-S-A-S-S-A-A-C-S-P-S-A   SS                                 2
    

    (Which is what you have posted, except that there is only one line of output for "SS" when x_id = 1.)

    One way to achieve these results in Oracle 11 is:

    WITH   got_s_cnt    AS
    (
         SELECT     x_id, txt
         ,     REGEXP_COUNT (txt, 'S')     AS s_cnt
         FROM     table_x
    )
    ,     cntr          AS
    (
         SELECT     LEVEL     AS n
         FROM     dual
         CONNECT BY     LEVEL <= (
                                   SELECT  MAX (s_cnt)
                             FROM    got_s_cnt
                               )
    )
    ,     got_pattern     AS
    (
         SELECT     s.x_id
         ,     s.txt
         ,     c.n
         ,     REGEXP_SUBSTR ( REPLACE ( SUBSTR ( txt
                                                 , INSTR (s.txt, 'S', 1, c.n)
                                    )
                             , '-'
                             )
                         , 'SA*[^A]'
                            )       AS pattern
         FROM    got_s_cnt  s
         JOIN     cntr        c  ON  c.n  <= s.s_cnt
    )
    SELECT       x_id
    ,       txt
    ,       pattern
    ,       COUNT (*)     AS cnt
    FROM       got_pattern
    WHERE       pattern     IS NOT NULL
    GROUP BY  x_id
    ,            txt
    ,       pattern
    ORDER BY  x_id
    ,            pattern
    ;
    

    At the heart of this query is the call to REGEXP_SUBSTR:

    REGEXP_SUBSTR ( x
               , 'SA*[^A]'
               )
    

    who is looking:
    S = the letter S
    A * = the letter A, 0 or more times
    [^ A] = nothing, except the letter A

  • Need help to find and install the game Chess Titans Windows Vista for XP

    Need help to find and install the game Chess Titans Windows Vista for XP

    Hi SBOYDC130guy,

    We will not be able to install titan of failures on windows XP because it is designed for Windows Vista and Windows 7 and it's built-in game.

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • need help to find the windows vista key

    need help to find windows vista key product I lost my kit, but I have windows vista cd/dvd. Please answer me as soon as posssible, thank you

    http://magicaljellybean.com/KeyFinder/

    Use the program above to find the product key in your operating system Vista running and active.

    If a desktop computer: Watch next or back.
    If a laptop: look on the underside.

    If a recovery disk, most of the manufacturer's recovery disks do not need a product key to get back to factory settings.

    This is the limit of the help that we can give you a missing product key.

    See you soon. Mick Murphy - Microsoft partner

  • Need help to find the "main point size.

    Hello

    I need help to find the "main point size.

    Any style of Pará which is more than 2 points of my font size, I need the alert message "His more than 2 points for your font size". For example, the font size of my para 10 here is my attack should be 12 points rather than his 14 points, I need the alert message.

    Is it possible by script?

    by

    hasvi

    Hi Hasvi,

    Try this.

    var doc = app.activeDocument;

    var texts = doc.stories.everyItem ().textStyleRanges.everyItem () .getElements ();

    pstyle var = ' Suite of paragraph styles have more leadings: \r\r ";

    for (var i = 0; i)<>

    {

    PS var = text [i] .pointSize;

    If (texts [i] .leading > ps + 2).

    {

    pStyle += text [i].appliedParagraphStyle.name;

    }

    }

    Alert (pStyle)

    While it is true that mark as answer correct and do not select your question as a correct answer.

    Kind regards

    Cognet

  • I just got a new computer and need to download my products and they are produced of cloud, can you find it for me and help me to download again

    my email address is [private information removed by Moderator]. My old computer broke, I got a new and I need to download everything I have, but I have no documentation

    You can download your applications https://helpx.adobe.com/creative-cloud/help/download-install-app.html CC

    If you need help with it ("all I have"): Contact Customer Services.

  • Compaq presario CQ57: need help with to enter password administrator or power on password

    I need help when I started my pc in the screan apears enter password mot_passe_administrateur or power
    I try to put a few passwords and says system disabled 62568899
    Please help me

    @aniaraariana

    Enter: 73440219

    Kind regards

    DP - K

  • I need help to find the correct version of the BIOS.

    As the title says I need assistance to find the correct version of the BIOS and now I have P02 - A2: 2011-10-31 and an Acer G3610 predator.

    I need an update is because I bought a new CPU and when I start the computer, it starts only for like 2 sec then turns off then on again one then it emits a beep of 3 or 4 times, then he is leaving and on but never goes Windows just a black screen so my guess is that I have an older version of the bios that does not recognize the CPU.

    Nope.

    I think they changed the revision of the motherboard, so you can't Flash this BIOS on your system.

    That's why you have a size mismatch error.

    So, you can not upgrade to Ivy bridge, sorry.

  • HP-15f039wm: need help to find the driver

    I got lost. need help finding the (USB) Universal Serial Bus controller. would be very grateful for help.

    Hello

    Try the driver on this link.

    http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66211.exe

    Kind regards

    DP - K

Maybe you are looking for