I just installed PE13, I still have 11 PE on my system.  On the home screen icon Organizer is black (not red) while the PE icon is red, no idea whats going on?

Similar Questions

• I just installed Windows 10, and all my photos are forthcoming as of the empty squares. I need to solve this problem as soon as POSSIBLE for a job... ideas?

  I just installed Windows 10, and all my photos are forthcoming as of the empty squares. I need to solve this problem as soon as POSSIBLE for a job... ideas?

  I have re calibrated my monitor with my color munki... everything is back to normal! Thanks to @adobecares on Twitter.

• I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  Can she be seen by disk utility (and which version of Mac OS X is)

• My laptop was stolen. The CreativeSuite has been installed. I also have programs on my Mac work in the office. When I buy a new laptop, I have to install the programs on the third computer. Is this possible? What can I do?

  My laptop was stolen. The CreativeSuite has been installed. I also have programs on my Mac work in the office. When I buy a new laptop, I have to install the programs on the third computer. Is this possible? What can I do?

  Hello

  You can install and activate the perpetual software (purchased) two computers of the same type (mac or pc), as long as you use it on one at a time.

  For deactivation refer:- https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  If you do not have access to your old computer because you have replaced a hard drive, upgraded your operating system to format your computer before you deactivate your software or your computer is dead, you can ask Adobe Support to help you disable from a machine, you cannot access. Have your serial number or Adobe ID ready, then contact us.

  To load the software on another computer, download and install it as you did on the first computer. Then enter your serial number to activate it.

  You can also see: -.

  https://helpx.Adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

• Just installed LR cc on my Mac. At first I see the splash screen soon but then the program stops

  Just installed LR cc on my Mac. At first I see the splash screen soon, but then the program stops.

  Tried to uninstall and reinstall but this does not solve the problem.

  Here detailed description: If you are seen Lightroom CC install questions - Lightroom Killer Tips

• I need to reinstall Adobe Acrobat 11.0 I bought in 2014. I lost my hard drive and need to install the new hard drive.  No idea what I'm doing!  Thank you!

  I need to reinstall Adobe Acrobat 11.0 I bought in 2014. I lost my hard drive and need to install the new hard drive.  No idea what I'm doing!  Thank you!

  http://trials2.adobe.com/AdobeProducts/Acro/11/Win32/AcrobatStd_11_Web_WWMUI.exe

  This is the file I download - but when I go to the Setup process, I bought for the installation program Adobe Acrocat Pro XI (11.0.07).  When I insert my serial number, he wanders as invalid.  I am running Win 7 Pro.  It worked fine on my old hard drive.   I think I maybe win64.  Does it matter?

• Just installed Framemaker 10.  Have all of the options file (import, return, publish, etc.)

  Hello, I hope someone can help us with this problem.  We have just installed Framemaker 10 (included in our Technical Suite 3 package) and we don't see any options to be included in the FILE menu.  (eg. import, publish, return, etc..).  This is a new installation and we tried to uninstall/reinstall w / no luck.  On another PC Windows here however, file options contains everything it should.  Please see photos below for reference.  Any help is very appreciated!

  File menu appearance (missing options).

  

  How file menu should look like.  Why these options would not be displayed on a new install?

  

  It seems that you have "Quick Menu" active. To change the full set menu simply select display > menu > Complete.

  Ian

• I just installed windows 7 on an old dell dimension 4500 s. The installation went well, but I have a problem with the resolution of the screen. The resolution is set to 640 x 480 and my monitor is much better than that.

  • Just installed Windows 7 Home Premium Upgrade - 32-bit
  • Installed on the old Dell Dimension Dsktp 4500 s
  • Monitor is a Dell S199WFP Flat widescreen.
  • Everything seems fine, but the screen display resolution is messed up
  • Display resolution is set to 640 x 480, then it should be something like 1024 x 768
  • I can't change the resolution in the control panel
  • the screen is recognized as "Non - PnP Monitor on Standard VGA Graphics Adapter generic
  • It also seems that the driver is up-to-date

  What's wrong?!? Someone please help.

  Thank you!

  I remember that when I tried to install the driver, there's a message that says that it is said that it is not supported.  I don't know if I reinstalled the older operating system and then the new driver and vista or if there was a button to install the driver, even though it was not taken in charge.  Most likely, I installed the driver on the old XP operating system and then applied the upgrade to Vista. I always run a clean install to clean any spyware etc. The driver supports the X 9 live is what it takes. Use Vista driver is already installed.  I plan to upgrade to windows 7 in January and display the results.

• Renstalled Windows XP and installed SP3 now I have no sound I hear static in the speakers but no sound.

  REFERENCE DELL GX60 SFF
  OK hear goes: Windows Xp Home edition, ver.2002 was SP2. Celeron (R) CPU 2.4 GHz intel 2.39 GHz 512 MB RAM
  OK you can stop laughing now. I know its out of date and I know that I will eventually improve windows (getting another computer at the moment), is
  not an option. Now, my relic worked fine good healthy and not too fast, but it got me where I should go. Mainly to pay my bills, print them
  play games, etc.; you get the idea. somehow, well I ended up losing several programs and not knowing what I was done, I decided to reinstall
  Windows XP and also to install SP3 (bad decision!). I didn't know that my copy of resettlement was not installing many drivers, you had to put them
  yourself! Needless to say, I fumbled my way through, but I can not all sounds, oh I get this 'static' loud and clear when I turn the speakers off voltage
  but that's all. I've tried everything. Also, when I go into Device Manager and open sound, video and game controllers, it shows
  Audio codecs, Legacy Audio Drivers, Legacy devices of video Capture, media control and Codecs video (whatever that means).
  And when I opened the system devices, there is a yellow exclamation point in front: Intel (R) E75/25/E7520 DMA controller - 3594. (phew!).
  Well, I hope I gave you enough info.cause, I'm not that knowledgeable about computer technology. (I'm sure it's obvious LOL)  In any case
  Sir/Maam are unwilling to detach "sexist". I'll let you go, hope you can give me help on this issue, if I could I would just get a new one
  but I am living young 71 on S.S. Disibility and simply ends.  Not complaining do not. I am blessed. You have a wonderful and blessed
  day.
  Sincerely yours
  Mrs. Fannie M. Owens

  Go to your computer manufacturer's support web site and search for drivers of devices in Windows XP for your specific model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and install all, beginning with the card mother/chipset drivers, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• I just installed MS Office 2013 but I can't find where are the programs.

  I just installed MS Office 2013, when I try to access Excel or Word, I can't find them in my system.  In the past, as soon as you install MS Office, each program (Excel, Word, Power Point) present in the office.

  gavega

  Welcome to the Community Forum of HP.

  You can try to search for your start screen / Apps

  This might help:

  Search installed Application splash screen

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• post P2V, vmtools running, I still have to type CTRL-ALT to regain the cursor

  Post-P2V, post-vmtools install, but I always hit CTRL-ALT to regain the cursor of the vSphere Client console.

  What do we lack?

  What is the guest operating system and which driver are you using for the mouse? It should be the VMware pointing device.

• just installed my printer today. was working fine and then got a message error that says "print spooler is not activated" or something like that. How do I turn it on? I tried to understand for 30 minutes... Help, please!

  help to turn on print spooler

  Hello Bubbalooloo,

  Thank you for your message.  To enable the print spooler, please follow the steps below:
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Click the (+) sign next to "Services and Applications" > click on "Services".
  On the right, scroll down to and double click on 'Print spooler' > set the startup type to "Automatic" > click on 'Start' > click 'Apply' > click 'OK '.
  This should not only start your spooler in this instance, but now he has to start each time you start your computer.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• All my home screen icons have disappeared. Nothing shows up in my documents, pictures, or music. When I click Start, computer, OS (C :) the only thing that appears is BOOTSECT. BAK.

  My hard drive is always filled to the top so I know that my files are still on the computer, they are simply not visible.  I ran an anti-virus software and it claims do not detect all problems (the free version of AVG) when the software is scanning, it shows my files, so I think they are still on the hard drive.   Also, when I click on start, all programs, nothing is visible.  Help, please.  Thank you

  Hello

  read the information at the bottom of the below link to the subject of some malware that hide your data files and the cure for it regarding

  Read article 17

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-Recovery

  also follow the correct for that malware removal steps, just to be safe, let's

• I have an ebookbrowse toolbar icon right next to my home screen icon. I can't understand how do to remove/uninstall it. Please notify.

  I accidentally visited the site to browse e-books, and apparently the site installed her own boyfriend of toolbar in firefox. I can't understand how to remove it. Help, please

  See also:

  • http://KB.mozillazine.org/Uninstalling_add-ons
  • http://KB.mozillazine.org/Uninstalling_toolbars

• I have service pack 3 installed and yet I still have a black screen with the message of counterfeiting

  I have service pack 3 is installed, but I still have a black screen with the message of counterfeiting. I am a beginner of the computer

  Hello

  (1) you are able to log the desktop computer?

  (2) when exactly you get the black screen?

  (3) you receive an error message on black screen?

  (4) have you made any changes to the computer before the show?

  Please provide more information on the issue so that we can better help you.

  In the meantime, try the methods below and check if the problem persists.

  Method 1:

  In case you receive a black screen on startup of the computer, and then try the steps of troubleshooting provided in the link below.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  Method 2:

  If you are able to start the computer and you get the black screen at the level of the office without wallpaper then try the procedure described in the link provided below.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027