I keep losing my internet connection and then my windows firewall was disabled when I reconnect. It doesn't to everyone at home who also use the same connection. Help, please

Similar Questions

• I keep losing my internet connection. What is happening with this?

  Icon, I have internet and then the blue light turns off and I do not have access. I spoke with Embarq and they thought it might be the motem and send a new. I don't think that's the problem. If I have internet, after about three clicks, it turns off. It seems that more of a short circuit.

  Hello

  1. have you tried to contact your ISP (Internet Service Provider)?
  2. when the question is is produced?
  3. you remember to make changes to your machine before the problem?
  4. what operating system is installed on your computer?

  Follow the steps mentioned below and check to see if they help.

  Step 1:

  If you are using Windows 7, I would have you run the network troubleshooter and check if it helps.

   
  Step 2:
   
  I recommend updating the firmware of your router as well as update the drivers of your wireless network adapter.
   
  The majority of connection inside Windows 7 problems have been resolved by installing the latest driver for the wireless card with obtained from the manufacturer. Download and install the Windows 7 compatible drivers and check whether the problem is resolved.
   
  See the following article from Microsoft for more information on the update of drivers:
   
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
   
  Step 3:
   
  If this does not help, you can uninstall and reinstall the Device Manager wireless network card to be a safer side.
   
  To uninstall the wireless device manager,
   
  a. Click Start, type device manager in the search box of start and press ENTER.
  b. Locate the network adapters and expand the same.
  c. Select the wireless connection, right click and choose uninstall.
  d. restart the computer, if prompted.
   
  Pilots should settle automatically after the computer restarts.
   
  Now you can install the latest wireless drivers and check if this solves the problem.
  
  See also:
   
  In the Windows wireless network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

• Why do I keep losing my Internet connection when I still have a good WIRELESS card on my Windows 7 laptop?

  I always lose my Internet connection but yet my network signal strength is good. This happens on my Windows 7 operating system, but not my Windows Vista operating system. I'm afraid that this could have something to do with the firewall settings? He was repeatedly interruption of connection with the Internet and the two operating systems. Unplug the unit and reset the router solved the problem with Windows Vista, but only momentarily for Windows 7. I ran the diagnosis and resolution of problems. This utility can detect never any problem. Sometimes the diagnostics displays a problem with a connection to the Ethernet cord (but the laptop with Vista OS was fine). I have reset the wireless adapter, which claims to be working very well, over and over again. I have reset the settings of the Windows Firewall to its default settings. Don't know what else to do. Help, please! I fear that the problem exposed my laptop to a potential security threat.

  • I use a public network location setting I got with a security access code
  • Atheros AR9285 802.11b/g/n WiFi Adapter is the adapter connection
  • NETGEAR's router
  • WPA2-PSK is my type of security
  • Radio type 802.11n
  • Windows Firewall on
  • Microsoft Security Essentials on real-time
  • Microsoft Virtual Mini Port Adapter (WHICH I'VE NEVER SEEN BEFORE JUST NOW) displayed in network connections, but is not connected!

  Mindy

  Long @Mindy

  Try this,

  Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------

  Still a problem?

  Check support for the router and make sure that your using the latest firmware for the router.

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• BlackBerry Smartphones Portuguese and the French, is that the same? -HELP PLEASE

  Hello

  I'm Portuguese and I have a doubt, do you know if the software in french and Portuguese phones comes back exactly? and if I buy a french that I'll be able to use it in perfectly here? The phone has been unlocked by its true owner french so I guess there is no problem, but I wanted to know if it is compatible 100%.

  Thanks in advance,

  Mario

  Yes, the devices will be used in the two countries, under certain conditions...

  • It must be unlocked to use on one medium other than that to which it is brand. You have covered.
  • You must make sure that the pin of the device is "released" account of the previous owner, that is, the previous owner removed the device from his account in France, or PIN 'can' not be able to register on another carrier. This is different from unlocking.
  • You must save the PIN code on the new Portuguese service provider and have the BlackBerry data Plan on your account.

• On a shared PC my side do not connect to the internet but side not affected spouse. I have run virus scan and none detected on its side but can't run on my side, because I can not connect help please.

  My husband and I share a PC. He has his desk top and I have mine, just that recently, I have not been able to connect to what anyone on my side of the PC, but its East side works well, it can connect to the internet, but I can't any idea what should I do? I ran virus scan and his side of own, cannot check the mine but cannot connect help please.

  Hello

  1. you remember to make changes to your computer, after which the issue started?
  2. do you have a cable or a wireless connection?

  I would recommend that you follow these steps.

  Step 1:

  Test the issue in safe mode with network and check if that helps.

  Step 2:

  Configure the connection to obtain an IP address automatically.
   
  a. click "Start", enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  b. right-click on the network connection, and then click "Properties".
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. click Select 'Protocol Version 6 (TCP/IPv6) Internet' and then click 'properties '.
  d. check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  e. click 'OK '.
  f. click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  g. check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  h. click on 'OK '.

  Step 3:

  Follow the steps in this article and check if that helps.

  Why can't I connect to the Internet?

  Steps are also applicable for Windows Vista.

• Cannot connect online casino - keep putting "check internet connection.

  Cannot connect online casino - keep putting "check internet connection" which is fine?

  original title: games

  "Online casino" might be likely to hundreds of web sites and services around the world.  Can you be more specific?

  -Have you contacted support for the web site in question yet?  They probably have some minimum requirements (plugins, etc.) that you need as well as most likely the troubleshooting suggestions of connectivity to their web site.  Believe me - they want your money. ;-)

  You can also - to install and try using a different browser.

  (If none of the above sounds like it would apply to you - it's because you need to clarify what it is you are trying to do and what you see and what it is that you have tried to remedy the problem yourself.)

• How can I close the Client Services for Netware that is me project to use the fast user switching without losing my internet connection

  For NetWeare customer service

  How can I close the Client Services for Netware that is me project to use the fast user switching without losing my internet connection

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in Forum.You IT Pro can follow the link for your question:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• Laptop does not connect to the internet, office. Both use the same router. Tried troubleshooting, does not. Help!

  I have a desktop computer and a laptop. Both use the same router. The laptop does not connect to the network, but the office has no problem. My wireless adapter on the laptop is on, I tried troubleshooting. I tried to turn it off for 30 seconds then restart him. But nothing is resolved the problem. Any ideas would be helpful! Thank you

  Hello

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I had to reboot my system and then to install my ACC, I used the same product key (redemption code). However, the system says that the code has been used. Anyone can teach me how I can use the same installation code to download VAC. Thank you in advance

  I had to reboot my system and then to install my ACC, I used the same product key (redemption code). However, the system says that the code has been used. Anyone can teach me how I can use the same installation code to download VAC. Thank you in advance.

  Download/install the desktop application, connect and install applications subscription.

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

  Creative cloud to desktop

  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Install, update, or uninstall applications

  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

• How do you get Lightroom CC on my new iMac? I currently use it on this iMac 1 and want to use it on the new. I am using a different email but address using the same wi - fi connection. Thank you.

  I just bought a new iMac, and after setting up, I need to find a way to access the Photoshop and Lightroom CC CC. I am using the same airport and wifi but a different e-mail address, if that matters. ?

  Hi Captainlenny

  You must first download Creative cloud Application Download Adobe Creative Cloud apps | CC free trial Adobe

  Then sign in with your Adobe Id (The same Id with which you bought the map) see connect and disconnect to activate Cloud Creative applications

  • You cannot use a different Email address to connect
  • If Creative cloud says "you are already you connect to maximum authorized devices" select " sign me out of all the other thing ' so that you can connect.

  Concerning

  ~Assani

• How can I report an attack from malicious software by using your video download? Avast has refused to let it download and then survey myself, it was as an attack.

  An update for Mozilla video appeared when I opened Mozilla this morning. I clicked Yes, because the videos have been seriously lagging behind. Avast flashed immediately that it was a virus, so I stopped it download. After returning from lunch, it does the same thing. The download shows as Video.exe and Avast is described as: URL: hxxp://69.4.238.156/14/NewVideoPlayerSetup.exe and Infection: URL: wrong I don't know enough about software, nothing to do with this, but thought you should be informed that I very rarely get attacks of Mozilla. As a side note, somehow a program called optimizer Pro seemed to drag on my computer at the same time and tries to download himself with the virus.

  Thanks for all the work you do. Mozilla is my favorite browser and you guys are doing a great job with it.

  SRoss62

  More all products that Mozilla has are to say a mozilla.org site link.

  https://mozillalabs.com/en-us/projects/
  https://www.Mozilla.org/en-us/products/

  The only real video related Mozilla, it's https://wiki.mozilla.org/Shumway and more info on http://mozilla.github.io/shumway/

  The site that you downloaded this NewVideoPlayerSetup.exe of was a scam because it uses the inexperience of users and the popularity of Mozilla and Firefox browser to trick people to install this kind of things.

  Next time if you are unsure, you should ask someone will then tell you if it is legitimate or not for example.

• I installed a PCI express and then my windows xp says that my windows will be expires if not activated within 3 days, what to do?

  Windows is unactivated :/

  I installed a PCI express and then my windows xp says that my windows will be expires if not activated within 3 days what to do

  Have you tried to restart by phone:
  How to activate Windows XP

• Every now and then a window appears stating "Personal Storage".

  original title: I use Windows XP.  Window "Personal Storage.

  I use Windows XP.  Every now and then a window appears stating "Personal Storage" and it apparently passes to load information from somewhere in the computer.  I would like to know what data is stored and where I can find it?

  Thank you

  Tom

  Hello

  · Makes the popup window at some point?

  · You have scheduled a backup timely data on the computer?

  · How much time does it take for the course ends?

  1. check if no trace of the task is listed in the event viewer: how to view and manage the event logs in Event Viewer in Windows XP: http://support.microsoft.com/kb/308427

  2. always check if any program of personal storage name is listed in Add or remove programs list.

  Access add or remove programs, you can follow these steps:

  a. click on start

  b. click Control Panel

  c. click Add or remove programs

  3. on-line virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it.

  * Original title: reinstalling Windows Vista

  I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it. I restarted my computer, press the F12 key and selected boot from cd/dvd, but the computer still started in windows. My computer is Dell. If there is no solution, it is possible to reinstall windows without using the disc?

  Hello

  Here are the options of relocation:

  How ro reinstall from the Dell recovery partition:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  Reinstalling the printer Dell supplied disk:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

  ______________________________________________

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.