I'll have my SDHC card 4 GB a formatting of hard time for my Vivitar DVR camcorder at 949HD.

Similar Questions

• I want to improve on Icloud storage 5 GB to 50 GB, but I don't have a credit card. Is there another way to pay for it like buying a gift card to itunes and set up?

  I want to improve on Icloud storage 5 GB to 50 GB, but I don't have a credit card. Is there another way to pay for it like buying a gift card to itunes and set up?

  You can use a gift card or a debit card to pay for it.

  (137091)

• SDHC card reader HP HDX 16

  Does the HP HDX 16 t Digital media player "5-in-1" support higher capacity called SDHC SD Media? SD-MS/PRO-MMC-XD said the label next to the port. The newer HP computers show SDHC beside the slot as well.

  Hello

  HDXfan wrote:
  Does the HP HDX 16 t Digital media player "5-in-1" support higher capacity called SDHC SD Media? SD-MS/PRO-MMC-XD said the label next to the port. The newer HP computers show SDHC beside the slot as well.

  SD and SDHC cards and devices have these compatibility issues:

  • Devices that do not specifically support the SDHC do not recognize SDHC memory cards. Some devices can support SDHC through an update of the firmware.
  • SDHC devices are backward compatible with SD memory cards
  • Some manufacturers have produced 4 GB SD cards that conform to the existing SD or spec SD2.0/SDHC devices.
  • File system: SD cards are typically formatted with the FAT16 file system, while SDHC cards are usually in format FAT32. However, both types of cards may support other file systems for general purposes, such as UFS2/ext2 or owner exFAT for example.
  Media Digital slop in your laptop is compatible:

• I have windows xp media center edition 2006 when I put in the sdhc card, nothing happens but it will not work on windows 7

  When I remove my camcorder sdhc card and put windows xp I guess he's not reading but it will work in wimdows 7 I have service pak 3 instaled on my computer that I need to install something else

  You may need to install a "patch".

  See if these items help you:

  "Fix for Windows XP that adds support for a capacity of more than 4 GB SDHC cards"
    <>http://support.Microsoft.com/kb/934428 >

  «The 923293 hotfix adds support for SD memory cards high ability in Windows XP»
    <>http://support.Microsoft.com/kb/923293 >

  It is also possible that your card reader itself does not support SD cards that are more than 4 GB (i.e. SDHC).

  HTH,
  JW

• I want to download photos/videos from my 8 GB SanDisk SDHC card on computer but, I have problems...

  I have a Dell Dimension E520 with Windows Vista desktop computer... The disc/sdhc 8 GB card works fine in my camera...   When I put the sdhc card into its slot in my computer to download photos/videos of the card on my computer, everything that happens is a green light near the slot lights up. That's all. Nothing appears on the screen of my computer to guide me on what to do next... This is the first time that I do this...   Are you able to help me?

  It is possible that your media player is not compatible
  with the SDHC technology. The best is maybe to buy
  an external drive that is compatible SDHC or download
  Unit photo using a USB cable.

• I have a file of avchd about 15 min in length on a sdhc card. My camera says there is only one file. When I put the card in the PC (Win8.1), the PC said there are 2 files,.

  I have a file of avchd about 15 min in length on a sdhc card. My camera says there is only one file. When I put the card in the PC (Win8.1), the PC says there are 2 files, a 11mins about and the other is 4 minutes long ago. If I put these files in Prime Minister CS6 they are the two identical length of 15 minutes, what is happening here?

  Copy card full hard disk, and then ingest via the media browser.

  See if that will make a difference.

• Toshiba excited Pro AT10LE-A-107 - maximum capacity of SDHC card

  Hi all
  I have this tablet for two years, a few days of warranty now. I decided to attach a larger SDHC card.
  Having two cards

  32 GB SanDisk Extreme SDHC micro and 16 GB SanDisk Ultra SDHC I. The two cards are not recognized by this tablet.
  The two cards are formatted to NTFS in the laptop, because I want y videos app 5 GB.
  Card maximum recognized size is an 8 GB card.
  In this description, there is no maximum support for the SD card capacity:
  http://www.Toshiba.EU/discontinued-p...-at10le-a-107/

  Any suggestions what to do?
  What is the maximum SD card that is recognized in this device, please?
  Thank you
  RoSy

  OK, tried to format the card with exFAT. Card 16 GB recognized.

• HPTouchSmart 520PC: SDHC card download

  I have problems to download from an SDHC card.    In the latest that I had to do was insert the card and the pictures have been uploaded.   I now get a pop-up on the lower left corner of my screen that says simply SDHC.    I'm lost for what to do.

  Under 'Computer', right-click on your digital camera (that you mentioned the icon) and then click on "import pictures and videos".

• question 'write protected' for an SDHC card

  The file in my SDHC card (SanDisk 8 GB class 6) can be played with my laptop (Pavilion dv2500). However, when I try to save a file, it shows me to 'the disc is protected wrote.' After that I have spend the card locking lug, my laptop still show the same warning message.

  My computer sony can save a file in the SDHC card even when the lock tab to the "Unlock" position

  An idea for this problem? THX

  Location of card reader is inside a metal case stainless steel with a small tab on the side which acts as a switch to make contact with another piece of metal depending on the position of the piece of card blocking.  Most likely your drive switch is defective and it can be folded to make contact again but otherwise it's an advanced welding repair work requiring unsoldering special welding or a heat gun for repair (which means that if not all replaced mainboard needs assuming that the card reader is built on the motherboard instead of a daughter card.

• HP2101i with Windows 7 Home Premium cannot read SDHC card

  I have connected a VR Olympus-379 with photos on a 8 GB SDHC card with a USB port on my HP, and the following message is displayed in the desktop monitor: 'the situation is not available', and inside the box is a big X and the statement 'Q; ------is not accessible. Access is denied. "It does not recognize the connection. It only shows the DVD drive as the only device with removable storage. The same thing happens with my system Toshiba laptop C655 64-bit of Windows operation. How to do one or the other to read the card, so I can see/save photos.

  I just want you to know that the problem is solved. The SD reader was an old I knew couldn't read a map HC. Thank you for your kind cooperation.

• Satellite Z830 - unrecognized 32 GB SDHC card

  I have a Satellite Z830 with the SD card reader.

  Sheets said he read SDHC cards, so I bought a Transcend 32 Gb SDHC card to put all my music. When I plug it into the laptop SD card reader there is no nothing - nothing show in Windows Explorer or disk management. It's as if the reader doesn't even know a card is inserted.

  However, if I put the card in a SD USB card reader and plug it into the USB port, the computer sees the card very well. I can copy files to and from it. Is this a driver problem, or is this hardware connected?

  Hello

  According to the user manual, the internal card reader supports SD card (8 MB - 2 GB), SDHC (4 GB - 32 GB) and SDXC (64 GB).
  So you should be able to use the 32 GB card with no big problems.

  If the SDHC card works in other books, then I would say that this s a compatibility issue that's one and only a plausible explanation for me maybe, you should test another card from another manufacturer under Z830 32 GB SDHC.

• SDHC-Card-Driver for Win7 and Portege M200?

  ICH is not SDHC-Card-Driver for Windows 7 and the Portage M200.
  Either way... work the SD Card Reader in the M200 with linux (ubuntu) and someone has a link with instructions?

  Sorry for my bad English.

  You could try the Win7 driver card to a similar newer model reader, such as the Portege M400. Have a look here: http://support.toshiba-tie.co.jp/windows7/drivers_au.htm

  Also run WindowsUpdate Control Panel, it can find a driver automatically.

• Camileo P30 does not work when the 8 GB SDHC card is inserted

  Hello
  I just got a new camcorder Camileo P30.
  I also bought a card 8 GB class SDHC 6 100 'Lexar Premium' x
  And it does not work with the card inserted.

  Here are the symptoms:
  (1) when the card is not inserted I can do everything OK - take pictures and video, use the menus, it turn on and off.
  (2) when the card is inserted, the following occurs:
  2.1) I can't take pictures or video - it does not meet the pressed buttons.
  2.2) I can't access menus.
  2.3) I can't shut off again.
  2.4) I do not identify the amount of memory is available (shows only 0 recording time remaining).
  (3) I have tried different combinations of:
  3.1) Insert the card so that the camera is turned off.
  3.2) Insert the card so that the camera is turned on
  3.3) Insert the card while the device is switched on and in one of the menus.
  (4) the camera doesn't always work if I take the card again.

  During these expriments (#3), I was sometimes able to get a record time correct left (#2.4), but still #2.1 to 2.3 # were a problem.
  At one point, I was also able to "format" the card and subsequently, he showed a record very long time available (not matching only not to the size of the map) and #2.1 to 2.3 # were still in force (i.e. I couldn't use the camera or turn it off).

  Note to work around the #2.3 I took the battery.

  I was not yet looking for updated firmware, or connect it to the PC.

  Has anyone of you has met with such a problem?
  What did you do to solve it?

  Thank you.

  Hello

  Have you tried another card SDHC?
  I m not very well what is happening here, but I recommend you another card in this camcorder.
  I m P30 not owner but I have a: 30 and the camcorder reads without problems for 16 GB SDHC card. It works perfectly.

• Re: Satellite A200-1N7 does not read the SDHC card using Win 7 32 bit

  Hi all

  After that I installed windows 7 32 bit on my laptop, it does not read my sdhc card.
  And he did it when I got Vista.

  Can someone help what to do?

  Thank you very much:

  Adry

  Hello

  Have you installed the driver for the card reader?
  Have you noticed an unknown device in Device Manager?

  Please see the page of European disk from Toshiba for the card reader driver.
  Satellite A200-1N7 belongs to the PSAE3E series
  I found the driver of the card reader for Vista 64-bit
  Usually the Vista driver should work on Win 7 OS too

  If this does not work, then try the drivers released for A500 or L500 series!

  Welcome them

• Can be upgraded the firmware on my Satellite Pro A120 to accept SDHC cards

  I have a Satellite Pro A120 and use the slot for SD card frequently, however, the capacity of memory cards can sometimes be restrictive, is it possible to update the firmware for SDHC cards and if so, how.

  Hello

  Unfortunately not possible since it s card reader has NO firmware and it s a stand-alone device that has nothing to do with the BIOS (firmware) of the machine.

  So, if she can't simply do not support. :/

  See you soon