I'll try to find a drive hard replacement hitachi travestar

Similar Questions

• Remove rear cover to find the drive hard hp pavilion 10 touchsmart laptop

  I have a Hp Pavilion Touchsmart Pc e010nr 10 (this is a mini) well it was thrown to the ground by my 2 years and when I went to turn it on, it says please install an operating system on your hard drive, then it allows me to go to diagnostics of material where it gives me a memory test option an option to check hard disk. When I selesct the memory check option it passes check memory and when I select the disc hard checkit nsays its not installed. So my question is how do I remove the back cover so I can make sure that the hard drive is secure? His portable regulars not like who r easy to remove the hard drive. Can someone help me please w one link or a video or instructions on how to remove the rear handle to check if my hard drive did not have kocked loose when it was launched? Thank you very much

  Hello

  Unfortunately, the HARD drive is not the best thing to do in your model in particular (you need to remove the top cover and the Assembly of the speaker), however the procedure is detailed from Page 52 of your maintenance & Service Guide.

  Kind regards

  DP - K

• XP cannot find the drive hard installing macbook

  Install XP from ISO image, that I burned to a DVD.

  Fusion installed before okay.

  XP then says «Setup did not all hard disks...» "can not continue then starts to do things.

  I did google and install messages found of it during the nonmac - something about lack of drivers scsi... but everyone has got a solution for Mac?

  Cheers from Aus!

  Dave.

  This has nothing to do with the Mac or your installation of Fusion software. This has to do with the type of virtual disk that is set when the virtual machine is created.

  Merge (and other VMware products hosted) supported the virtual drive as SCSI (BusLogic of SCSI controller compatible) devices devices or IDE devices. What is probably happening (as noted by the previous posters), is that the virtual hard disk that is created is a SCSI hard drive. You can confirm this by opening the settings of the virtual machine, click drives, and note if it is IDE or SCSI disk to the virtual disk.

  Since the Windows XP installation diskettes is not the SCSI driver required in them by default, you must do one of the following:

  • Inject the SCSI driver provided by VMware in Windows Setup (as you would with any other device that does not have a driver on the XP installation disc). The driver provided by VMware is on a virtual disk "inserted" in the floppy drive virtual drive (see VMware Fusion help on how to access the virtual floppy drive floppy image). From there, the process is exactly like the addition of a driver in a physical machine.  As says rcardona2k, using the Easy Install option automates this task for you.

  or

  • Make sure that your virtual machine has a virtual IDE drive. You don't have to completely recreate your virtual machine - you can take your existing, open its settings, click on hard disks, remove the existing hard drive and add a new hard drive with an IDE bus type (and other options and desired size).

  For the record, the virtual SCSI hard drives perform a little better that the IDE, but you may or may not notice the difference.

• DeisgnJet HP 750 c more: try to find the driver for HP DesignJet 750 c Plus - I have no disc

  I recently inherited a HP DesignJet 750 c more.  Its still in great condition and I think that works.  I bought a new cable for it this week and foolishly taken I'd be able to download a driver for it on the HP website.  Due to the age of the machine, it seems to be more supported.  Help someone!  I need a driver for this product download or it is completely useless!   And it's that it was not clear, I don't have the original CD.  Help!

  HP has really screwed the instructions on this one. You must search a directory 'win - x 64-hpgl2-drv' directory will be without quotes and on mine, it was located in the downloads directory. This directory will be inf file you need.

• Try to find a former serial number from a previous installation on the old hard drive. Any help?

  My old pc motherboard crashed and I'll try to find my previous serial number. Any idea on where to find it in the old installation?

  Hello

  If the serial number has been saved with Adobe, then support would be able to find it.

  Please contact customer service to help you locate the serial number.

  ^ Ani

• Help to find the driver on the Satellite A200 (PSAE6) HARD disk controller

  Greetings. This text has been written through a translation program, to try to understand :)

  Problem:
  My friend bought a few days back to herself TOSHIBA Satellite A200 (PSAE6) where it has been established operating system Windows Vista Home. He asked me to change OS on Windows XP Pro. With the first problem I have consulted - have deleted Vista, but to set up XP is not possible due to the absence of the HARD disk controller driver in the OS distribution kit. Windows Installer cannot find the HARD drive. I read that it is necessary to load the driver during Setup, press the F6 key. But a problem I can't find the driver in that.

  We have no disk with drivers that should go with a computer and therefore it is necessary to search independently on the Internet. On the Toshiba site to locate the pilot, it was not possible. Then I came to the Intel site and download "RAID/AHCI - Intel® Matrix Storage Manager» After unpacking I got only «infinst_autol.exe» archive

  Question:
  Where can I download this driver (not a "EXE" format) that can be used during the installation of Windows XP?
  PS: a chipset - Intel PM965 Express

  Thank you

  Here:
  http://support.toshiba-tro.de/Tedd-files2/0/stormng-20070827133046.zip

  use the files in the folder "ICH8M_32bit".

  Zingy

• Could not find music on hard drive returns d: / refers to a location that is not available or does not exist

  Original title: Mystery hard drive
  
  Hello people,

  I am running Vista Business v.6.0

  I did a search for any music I had on the hard drive after having transferred most of it long ago at my laptop.

  I found 40 GB of music to a folder (d: /) which does not exist anywhere. I clicked on a file and clicked on "position to open the file" but got a very long message saying

  J:/King Khan and the shrines / which refers to a location that is unavailable. It could be on a hard drive on this computer or on a network. Make sure that the disk is properly inserted or that you are connected to the internet or you check your network and try again. If he can't always find the information could have been moved to a different location

  I can't find a drive J anywhere and want to get rid of everything that might be hiding in it.

  Any advice?

  Thanks in advance

  Hello

  If no one offers more ideas that you might want to try this.

  The search Index may be corrupted. If so, you can rebuild and then check with what you know to be on your hard drive.

  "Reconstruction of the Index in Windows Vista"

  http://www.howtogeek.com/HOWTO/Windows-Vista/rebuilding-the-search-index-in-Windows-Vista/

  See you soon.

  p.s. Here is a free program that will show you exactly what is on your hard drive:

  http://www.Jam-software.com/treesize_free/

• I can't find my external hard drive under 'Computer' but it appears in "Devices and printers" How can I access files on my external hard drive?

  I can't find my external hard drive in "computer".

  I just bougth a new HP computer running Windows 7.  I just copied a bunch of movie files, music and photo of my old Mac (OSX Leopard) on a Western Digital external hard drive.

  I plugged the external drive in my HP via USB 2.0 on the front of the computer.  Windows recognizes the drive.  She appears in the Panel of external control/hardware and Sound/devices and printers as "HARD disk".

  It does not appear in 'Computer' under 'devices with removable storage ".

  I just want to get to my files so I can copy them to my new computer.  How to access my files on the external hard drive?  Why isn't he appear in 'computer '?

  Hello ShamedMonkey,

  Thank you for your message.  The problem you are having is because of differences in formatting between PC and Mac.  You can, however, transfer your files between the two.  I will set out what must be done under and limitations of each.
  First, you will need to format the drive on your PC.  When you format the PC, you can format it in FAT32 or NTFS.
  (You mentioned that you do not see the drive in the computer) To format drive:
  Click 'Start' > right click on 'Computer' > select 'manage '.
  Click on "disk management".
  In the right pane, you should see your drive > you can then do a right click and 'format '.
  FAT32:
  This format will allow you to easily transfer files between the two.  This format becomes problematic when you transfer files more than 4 G.  There is a limit of 4 GB in FAT32, etc. of many movies are bigger than that and cannot be transferred using this format.
  NTFS
  This format has no size limitation, however, in its normal state it will be 'Read only' on Mac.  If you will not be able to transfer all the data itself.  While doing some research on the web, it seems that you can use a program called MacFuse on your Mac to change to NTFS files.  I have not confirmed this, but you can give it a try.  If this program works as planned, it would be the way to go.
  Please let us know if it did or did not solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Linux installer is unable to find the local hard drive

  I try to install CentOS 5.2 (a derivative of Red Hat Linux) on VMWare Fusion 2.01. I can run the Installer (graphical mode) to the point where he asks me how I want to partition my hard drive. At this point, I can't continue as Setup can not find a disk hard - the box saying 'select the (s) to use for this installation' is empty. If I click NEXT, I get an error (obviously). Any help would be appreciated.

  When you created the virtual machine, what type of operating system prompted you chose? CentOS 5.2, I would suggest RHEL5, since it is the guest of farm taken supported. The reason by selecting the correct prompt when creating virtual machine is important because it influences what virtual material is used, and some clients do not come with drivers for some hardware (and therefore will not recognize it).

• I can't find my external hard drive

  Hello

  I have a drive hard new, not used externally. It has its own drive system and goes into USB.

  A friend got for me (he knows computers!), it's a drive hard there, for which he bought coverage.

  He says that it's compatible pc and mac and my friend tested, and it worked on his windows pc. He said all I had to do was of gives it so it would be mac compatible.

  Today, I wanted to do, but I can't drive anywhere on my macbook! It does not appear in the disk utility, or anywhere else that I checked.

  So I thought maybe it was automatically conferted in windows format, when my friend plugged to test. Who is right why I tried my husbands laptop windows-computer, so maybe I could set up here to something my macbook can read. But the disc is nowhere on my husbands laptop as well!

  The hard disk is turned on, the little green light says it's on...

  What can I do to find it?

  p.s. I'm still under OSX 10.6 (this is why I need it. I want to back up my documents before updating to the new OSX)

  Thank you!

  Jelka

  If the external hard drive is not readable by a Mac or a PC, then it is either corrupted or it has not been partitioned and formatted yet.

  Because it is not found in disk utility, I think at this point it is the first and will not be usable. However, if it worked on your friend's PC, told format to FAT32. You should then be able to access it with disk utility and reformat in HFS + for your Mac.

• Lenovo G580 - menu to start cannot find CD/DVD, HARD drive

  Hello everyone

  I have a little trouble with this laptop lenovo G580, which cannot start.

  Problem: HARD and CD/DVD drive is visible in the tap in the bios info, but they are not visible in the faucet of the boot, only an IP4 and IP6 EFI network are visible.

  I tried to change the HARD disk first to ensure if she would do anything, but did not work, so I spent back.

  But I've never seen this kind of problem before, so I really have no idea what to do.

  The version of the bios installed is V9.01 I hope that if someone has an idea that could help solve this problem.

  -Mootix-

  It seems ok I solved my problem, I will report how and what I have done, so anyone with the same problem can try this.

  OK, so apparently the Bios have been installing only the boot devices to reqister who had something to do with Windows 8, which means that the hard drive that was completely empty of any data, had nothing to do with Windows 8 and therefor can not be started with the current Bios settings.

  1. open the safety valve and turn off temp only "secure startup.

  2. go to the tap of Boot and change 'Boot mode' for Legacy Support UEFI.

  3. in the tap water Boot changes 'Boot prio' "first Legacy.

  4 reboot and press F2 and verify tap boot to the disk under "Boot device prio.

  Fact

  I think that since the drive HARD have Win8 installed it will not display as boot device unless it is on Legacy Support.

  because UEFI on the G580 only supports the HARD disk with a Win8 installed operating system.

  Now, I should be able to reinstall Win 8 - 8.1 on the HARD drive.

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Computer XP does not start all of a sudden. Drive hard Self Test error #1-07 Fail. How can I find the meaning of this error of hard disk?

  Computer XP does not start all of a sudden.

  My computer is a HP Lap Top Model zd8000 bought in 2006.  Never had a problem with it before.

  Drive hard Self Test error #1-07 Fail.

  How can I find the meaning of this disc hard test error message?

  Thank you

  I tried the suggestion using chkdsk/r

  The computer ran for a long time, but the computer worked once the process is complete.

  First thing I did was back up my data, I was real worried.

  Thank you very much!!!

• Windows detected new hardware wizard appears each time I try to connect an external hard drive via the USB port.

  Whenever I try to connect an external hard drive into a USB port, Windows detected new hardware wizard will appear. He then not recognize the external drive at all. It does not appear in disk management. In Device Manager, it is listed as a 'device' USB bus controllers not. Under "other devices", there the question mark yellow and says the device is not configured correctly (code 1). External hard drive works fine on other PCs. It's a plug-and-play device. Port and USB cable work fine with other devices. Just this external hard drive has never worked on this PC.

  Hello

  I suggest that you try to remove USB controllers to the clean boot state and control.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.
  See also:
  http://support.Microsoft.com/kb/310575

• WMP opens when you try to access an external hard drive

  Recently, when I try to open my external hard drive to see what files are on it, Windows Media Player opens and I get this message: «the selected file has an extension (.)» that is not recognized by WMP, but the player may still be able to play. You want to try to play this content? "I don't know why WMP opens when I double-click the external HD icon, he has never done before. How can I fix this?

  Hello

  I suggest that you try to perform a clean boo0t and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that put you the computer in start mode normal as suggested article above.

  It will be useful.