I lose the internet connection once the system go to sleep. I have to restart my computer to be reconnected.
int loose connection after sleep, wake and up no internet still not found or access network AI everything without restarting!
Hello
1. do you receive an error message when opening Network Center?
2. don't you make changes to the computer before the show?
Please follow the steps below.
Method 1:
Follow the steps mentioned in the links below
http://support.Microsoft.com/kb/937477/en-us
http://support.Microsoft.com/kb/933872
Method 2:
Try to update the network adapter drivers using the link below.
Tags: Windows
Similar Questions
-
I can solve this problem with a program or something?
Hi jasonsweeney,
· Did you do changes on the computer before the show?
· Is the SD card reader built into the computer or is connected via USB?
Follow these methods.
Method 1: Refresh the Device Manager before restarting the computer to see if the drive icon is back. Use the option ""look for changes on the hardware.". Follow these steps:
(a) click Start, type Device Manager , start the search box and press on enter.
(b) right click on the SD card and click scan for hardware changes.
Method 2: If it is connected via USB, then uninstall and reinstall the drivers of USB bus controller. Follow these steps:
a. click Start, click run, type sysdm.cpl in the Open box and then click OK.
b. click on the hardware tab.
c. click the Device Manager button.
d. expand Bus USB controllers.
e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
f. restart the computer and reinstall the USB controllers.
g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.
-
I use internet 8. Windows Update repeatedly continues to ask me to install the service pack that when I do I lose my internet connection and there to remedy, I come to restore the system to a previous date to get my internet connection
Hi James,
1 Windows operating system you are using?
2 are you facing this problem after installing service pack (SP) or at the time of installation of SP?
If you are faced with the question after the installation of the service pack, you can visit the computer manufacturer and try to update the drivers of network card on the latest version and check.
Updated a hardware driver that is not working properly
You also try to launch the troubleshooter from the following link and check.
-
I lose my Internet connection :(
Hello!I have a problem that I have had since I have this PC. I lose my Internet connection randomly without any reason, this happens especially when I play multiplayer games. There is still Internet (in my iPhone, iPad, another PC), but in my PC, it does not exist:
"Network 2".
"No. Internet access"Please help me! :(
Thank you in advance! :)
Data sheet:
Graphics card: GTX690
Proccessor: Intel Core i7-3960 X
RAM memory: 16GBO.S.: Windows 7 Home PremiumKevin
Hello
Check your router and check the cable being used. Always updated the NIC (Wired) network
Pilot - visit Site system manufacturer (manufacturer of motherboard for customized systems) and the
site of the manufacturer of the real device.Since he has passed since you received your computer do not forget to check with the system
Manufacturer support, their documentation online and drivers, diagnosis and ask for their
Forums about known problems with this model.I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
My printer on my laptop makes me lose my internet connection.
I have a Deskjet F380 printer all-in-one. I have a Dell Laptop Inspiron 9400/E1705 Vista 32bits. When I plug my printer in my laptop, I lose my internet connection and have no idea why it happens. I get my internet connection when I unplug the printer. I'd appreciate the help. Thank you.
It turns out that the Ethernet in my laptop goes wrong. The problem turned out to be in this connection. He now works as I put in a new ethernet wire. Problem solved.
-
When another PC on my LAN boot, my PC loses its Internet connection
When another PC on my LAN boot, my PC loses its Internet connection.
Do you have an error message on computers?
This may be caused if you have configured the computer to use the same static IP address. To see if this is the problem, follow these steps:
With your computer connected correctly, follow these steps:
Open a command prompt window (type cmd in the search box and press enter)
In the black command prompt window, type the following command, and press ENTER after each line
ipconfig/all > "% userprofile%\Desktop\ipinfoONE.txt".
output
Start the second computer and perform the following steps (which assumes that the second computer has Windows 7):
Open a command prompt window (type cmd in the search box and press enter)
In the black command prompt window, type the following command, and press ENTER after each line
ipconfig/all > "% userprofile%\Desktop\ipinfoTWO.txt".
output
IpinfoONE.txt of copy on the desktop of the first computer to a USB flash drive and then put the flash drive on the second computer. Use the second computer to answer here, then paste the contents of ipinfoONE.txt and ipinfoTWO.txt in your response. Be sure to indicate in your answer given that go with which computer.
-
Is VoIP a kind of internet connection what operating system using VoIP?
Is VoIP a kind of internet connection what operating system using VoIP?
VoIP means "Voice Over Internet Protocol". Have a read of this - https://en.wikipedia.org/wiki/Voice_over_IP for a little more in detail.
Any OS with a proper application should be able to use it. Skype is a typical example, there are others.
-
Since the installation of El Capitan, my streaming to my Audioengine DAC D2 cut after 12 minutes (the default duration of sleep). It will restart by pressing the space bar. When I change the duration of sleep, the cut outs are becoming more frequent and intermittent. Help?
I checked the wifi and changed frequency (new modem, frequency change made no difference). The Board battery seems fine - all updates well. My computer is an iMac (2011), 3.1 GHz Intel Core i5, 8 GB 1333 MHz DDR3, with a new AMD Radeon graphics card. I recently installed a State strong 1 TB SATA drive and fitted with a LaCie Porsche 4 to USB for backup and a 4TB disk storage RAID LaCie drive.
I'm frustrated, having to come in my computer since my living room every 12 minutes to continue to listen to Spotify on my stereo system.
My guess is there a bug in the software of sleep in El Capitan, which disrupts his (I've tried different USB ports connect the Audioengine sender and same thing).
Should I go back to Yosemite?
Turiteaguy
First of all, 10.11.3 OSX just came out. Try this.
-
Original title: Windows Update problem, help please
Whenever I go to windows update, it says "Windows update cannot currently check updates, because the service is not running. You may have to restart your computer"I restarted my computer, but the same message back steadily for several weeks. How can I fix?
Thank you
Hi Lydia,.
There are three services that are important to check, download and install the updates. These services are Background Intelligent of cryptographic services service and the Windows update Service. These should be in the started state and currently running on the computer so that the computer connects to Windows Update Server, check the update that corresponds to the computer, and then download them accordingly.
Follow the steps in http://support.microsoft.com/kb/2730071 and make sure that these services are started on the computer. If they are, then if he please stop and then restart the services. Restart the computer once that change in services.
It will be useful.
-
I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.
The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.
I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.
Operating system is Vista 64 bit.
Original title: Windows Update
I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.
The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.
I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.
Operating system is Vista 64 bit.
After the upgrade to the bigger hard disk, I found that the technology Intel Rapid Storage Technology driver should be updated. Once this is done Windows update ran properly. Microsoft Fixit did not help in this circumstance.
-
Whenever I start my computer I get the DELL logo, then I have to restart my computer keys ctrl pressed Alt del this continues for 2 to 6 hours I'm finely getting online, how can I do this faster process
Sez helps Vista...
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsNetwork connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problemsThe problems of Internet connection
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems -
Original title - Vista sp2 64-bit windows program update is not running
When I open the program "Windows Update", it has an "X" in a red shield symbol. When I click on the tab "Check for updates", I instantly get a message that says: "the Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. When I click on the button 'Start' and the window appears with the options of closing down, change user, registration, etc., the first button shows an orange exclaimation mark and when selected the computer seems to make an attempt to download whatever it tries to download. However, it never downloads anything, and the rest of the exclaimation mark orange. How can I solve these two issues? I'm guessing that repair will set the other.
Hi doubleott
Method 1:You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to p Ed a SFC Scan -.
a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
b. type the following command and press ENTER:
sfc/scannow
A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
e. once the scan is finished, close the command prompt window, restart the computer and check.Check the link below for further guidance on scan SFC - mentioned
http://support.Microsoft.com/kb/929833Method 2:
You can try to reset the Windows Update components and check if that helps. Follow the link given below to do the same.
http://support.Microsoft.com/kb/971058I hope this helps.
-
Original title: Program Files gone?
Recently, I started my computer and noticed that a bunch of files are corrupt, and left most of my shortcuts. I went into Program Files and discovered the entire file completely empty. The computer says to run chkdsk b/c the program files are corrupted. When I run chkdsk/r, it indicates that the NTFS is locked and I have to restart to run chkdsk. When I reboot, the chkdsk never runs.
My wife has all of its graduates work on the computer, I backed up since then, but I try to avoid doing a restore of the entire system. Can you help me?
I am running Microsoft XP.
Sorry to hear that you are having problems with your XP system. For XP support please visit the link below
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.WindowsXP.GeneralAlso, try to start the computer in Mode safe.
When the computer is switched on 1, start pressing F8 until you get a menu of Windows startup, choose Safe Mode.Sounds like something important happened (corruption). If you have important data there (for example, your wives, diploma work), I would strongly suggest taking the computer to a qualified technician so that they can recover data out of there before the drive goes down or the o/s is too damaged.
Good luck
-
How can I keep my desktop icons in the same place that I left when I restart my computer?
Icon office locations
I have the Windows 7 operating system. How can I keep my desktop icons in the same place that I left when I restart my computer. Now the icons automatically all go to the left side of my desk when I restart.
Hello
References to Vista also apply to Windows 7.
Difficulty for the desktop icons set in not getting saved after restarting Windows
http://www.Winhelponline.com/blog/fix-desktop-icons-layout-not-saved-restart/-------
Save and restore the desktop icon layout in Windows NT/2000/XP/Vista (Win 7) - free
http://www.Winhelponline.com/blog/save-and-restore-desktop-icon-layout/Save and restore the desktop icon Layout in Windows Vista (Win 7) - free
http://www.howtogeek.com/HOWTO/Windows-Vista/save-and-restore-desktop-icon-layout-in-Windows-Vista/TIP : right click on desktop - DISPLAY - uncheck AutoArrange and snap to grid
When you want to restore the icons or the restore will not work. You can
Recheck those needed later and apply the attribute Align to grid before the
Auto arrange.-------------
Office catering - free
http://www.MIDIOX.com/Info
http://www.MIDIOX.com/HTML/desktop.htm------------
Lock the post Office icons and disable right click
http://www.techmynd.com/lock-desktop-icons-position-and-disable-right-click/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I am running Vista on a 64-bit computer. I don't know with certainty how current I am, because as a problem earlier, but different, brought me back to earlier restore versions. I checked the Services and confirmed that the Windows Update service is started. I restarted my computer and the problem persists.
Is there a file that might have something in it that shouldn't be there or I'm probably deal with a corrupt program?
Hello
You can reset the Windows components and see if it works fine.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Maybe you are looking for
-
How can I print my lists of distribution for later use if the drive breaks down?
Had a problem with the hard drive on the new computer. Company reloaded hard drive. Lost all email addresses. Had to manually type in THE addresses again. Is there a way I can save my addresses to disk or print it out on paper for later use if I lose
-
Satellite Pro P100-439: sound and modem driver for Windows XP?
Hello I need for my his laptop and drivers for the Modem. Thanks for the help Edit: I come from Germany, sorry for my bad English. :)
-
Modem internal A60 - forbidden the company to detect
Sorry for my English (bad). My internal modem worked properly over a long period. Now, I can not connect to the second time. I explain:(1) I install Xp Pro(2) first time I connect to Internet, it's ok(3) then, it becomes impossible. The modem dial, a
-
HP 15-r036tu - is the 1600 Mhz DDR3 RAM compatibility
I have a HP 15-r036tu - I just want to know if 1600 Mhz DDR3 RAM is compatible with your laptop. The laptop has 1 single slot memory. When I run utility CPU - Z, it shows that the existing memory is of type PC-12800. Can I upgrade it to 4 GB to 8 GB
-
Hello Really struggling with an upgrade from 2003 SP2 Std 2008, it's a PC that is inherited. Installation goes completely to 100% then says failed and will return in 2003 again. Logfile below. -anyone any ideas please? and thanks for looking. 2016-04