I lost all sound on my dell dimension 3000

Similar Questions

• Reference Dell optiplex 320 running windows xp lost all sounds

  Recently, I lost all sound, I tried to uninstall & reinstall my audio drivers

  but continues to come up with the error code 39, when I try to reinstall or update the drivers

  It is also in place with the wizard is unable to find a better match for your hardware

  the currently installed software? All popular solutions

  It's no big thing to go on so only ideas in time...

  A 39 error means that your drivers are somehow corrupt.

  According to Dell, your audio drivers are here:

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&SystemID=PLX_PNT_320&OS=WW1&OSL=en

  Since there is only one choice for the audio drivers, when you got the drivers you trying to install?

  If this is not the place, which is the first place you should look for drivers.

  I uninstall the old driver first (from Device Manager), download the new drivers and run the downloaded driver. File EXE from the site of Dell and make what is said.

  If your system uses to work properly, what do you think has happened since the last time, he did not work properly?

• I lost all sound on my Equium M40X

  Seems to have lost all sound on my laptop Equium M40X.
  I tried everything obvious like ensuring that nothing is disabled, etc., have used the restore to an earlier date facility. I downloaded a new driver sound - but still no sound! Can anyone help please?

  Thanks, Bobby

  A strange case which s?  :|
  If I was you I would first check the Device Manager.
  There may be some conflicts with your sound card
  Remove the sound from the Device Manager and restart the machine.
  Then reinstall the audio driver again.

  Did you also check if you can hear something using the headset?
  You should do this!

  Also check if the sound is not muted. You can disable and enable using the FN + ESC.

• Satellite A80 lost all sounds

  Hi, can anyone help?

  My Satellite A80 seems to have lost all sound. When I open the audio program I get a message saying that no device found? I had her before without problem?

  If you are able to help at all, I would be very grateful. My email address is [email protected].

  Thank you.

  First of all, you should try to remove you sound driver should and then reinstall again.

  On the Toshiba page, you will find the compatible driver.

  The question remains then you should recover the laptop with the Toshiba Recovery CD.

  Usually, if your notebook malfunction s material doesn t then a recovery CD should solve this problem.
  Otherwise, the hardware may be faulty and the laptop everything should be checked by technicians.

  Best regards

• Windows Media Player 11 lost all sound. Reinstalling does not solve. Uninstall does not uninstall.

  Windows Media Player 11 lost all sounds (after a defrag?) Reinstalling does not solve. Impossible to uninstall before reinstalling (gives only a rellback from 11 to 11). Sound works fine on other programs.
  The value OK volume control.

  Hello KenLW,

  Thank you for your message.  It does not sound like one or several files in Media Player have been corrupted, uninstall and reinstall should solve the problem.  Uninstall Windows Media Player 11 can be a difficult process.  Click HERE for instructions on how to uninstall WMP11.
  Please let us know if it did or did not resolve the issue.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Dell Dimension 3000 mysterious starts.

  I have a Dell Dimension 3000 running Windows XP Home Edition. He suddenly began to automatically start shortly after midnight each day.

  Hi ColinArmstrong,

  Thanks for posting in the Microsoft Community forum. I'm sorry to hear that the computer automatically restarts during the night mi.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

   

  1. don't organize you all tasks restart the computer?

  2 has there been recent changes made on the computer before the show?

  3. is the computer is off or did you put the computer to sleep before it restarts itself?

   

  I suggest to check the Task Scheduler and make sure that you don't have something on demand for all night that making your restart the computer.

  You can find the Task Scheduler by clicking the Start button, click on the Control Panel, clicking system and security, clicking Administrative Tools, and then double-click Task Scheduler.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Cannot delete the printer in Dell dimension 3000 XP Home Edition 32 bit race.

  Original title: have dell dimension 3000 with xp home 32-bit edition.

  have 3 old printers in Control Panel I can't remove... mike

  Hello

  1. what happens when you try to delete the printers?

  2. do you get an error message?

  3 are logged as administrator?

  I suggest you to start the computer in safe mode , and then try to delete the printers.

  To start the computer in safe mode

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Hope this helps and let us know if you need more assistance.

• I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service is not...

  Original title: Journal of spooler

  I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service does not exist or has been marked for deletion. I tried this diagnosticTo start print spooler service and also long-term arer services set it to automatic, follow these steps.     a. Click Start, right click on my computer and select manage.  b. in the console that opens, expand the menu Services and applications.  c. click Services.  d. click the button twice to spool print.  e. in the 'Général' tab, go to Startup Type.  f. the Automatic value.  g. click on the Start button.  h. click on apply and Ok.     Click the Dependencies tab, and not all the dependency services and repeat the steps above to set automatic and start the service.      Restart the computer after you start the services above. After restarting the computer check if you can install the printer. And a few others. Someone at - it suggestions? This printer has been operational on this computer at any given time. Windows XP Home / Firefox. .:

  Hello

  1. don't you make changes on the computer before this problem?
  2. when exactly you get this error message?

  Step 1: Run the fix it tool using the article below and check out them.

  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

  Step 2: Try the steps from the article below and check out them.

  Error message when you try to start the spooler service for printing on a Windows XP-based computer: "error 1075.
  http://support.Microsoft.com/kb/915168/en-GB

• Dell Dimension 3000 graphics card upgrade

  Hello, I'm new here and was hoping someone could help. I find anything through my research that directly responded to my questions/needs.

  I need to add a video/graphics card to my dell dimension 3000. The problem I have is that I don't know where to look or what to look for to know what is compatible or not. Any help would be greatly appreciated.

  The basic system specifications:

  Operating system
  MS Windows XP Home SP3 32-bit
  CENTRAL PROCESSING UNIT
  Intel Pentium 4
  Prescott 90nm technology
  RAM
  2.00 GB Dual-Channel DDR @ 166 MHz (2, 5-3-3-7)
  Motherboard
  Dell Computer Corp. 0N6381 (microprocessor)
  Graphics
  Acer V173 (1280x1024@60Hz)
  Intel (r) 82865G Graphics Controller
  Hard drives
  156GB Western Digital WDC WD1600AAJB-00J3A0 (PATA) 96 ° F
  Optical drives
  Optiarc DVD RW AD-7200 has
  TSSTcorp CDDVDW SH-S222A
  Audio
  Unimodem half-duplex Audio device 

  Best regards, John

  With an older system like the 3000, you will only be able to use the old PCI interface for a video card.  These cards are more expensive and there is no reason to spend too much on an upgrade when dealing with older systems like that. Popular cards have been the 6200 Nvidia 8400 GS or the best 9400 GT.  Do not forget only the PCI interface.  No AGP or PCI Express.

  I'm not sure what your goal is the upgrade, but don't expect too much.  I know that people have upgraded to these cards to play games like the Sims.  Your system is just old with old parties slow and he can't move much faster with a video card.  You have 3 PCI slots on the motherboard.  Put the card into the top slot of most and move all other cards down lower if installed.  You should probably disable your chart integrated through your device manager before installing a video card for it to work and make sure that the first video is correct in the bios.

• Question for Dell Dimension 3000 IDE connector

  Hello

  I'm not sure if this is the right place to post, but please be patient with me. I have a loyal Dell Dimension 3000, 2 GB RAM, P4 processor, 1x250GB HDD burners 2xDVD-R, 1x3.5in floppy drive hard.

  My Question is how to be able to add a second HDD. I have no way to connect to one. The cable I have all what it connects to the current. There is no way with my current cable to connect a second HDD. I don't know what type of connector IDE cable I need or where to buy it, or if there is even an option to one.

  I have the tray and extra HDD ready and waiting but no way to connect. Any help is greatly appreciated.

  John Briggs

  The dimension 3000 will support two hard drives, but you will need support for additional hard drive and one connector three IDE 18 "L, 80-wire cable in water data, which is connected to the primary IDE hard drive and motherboard J6J2 PRI IDE connector, see page 38

  Dimension 3000 second hard drive installation.

  There are no instructions for the installation of a second IDE/EIDE hard drive in dimension 3000, but as the Dimension 4600 has the same case and chassis, you can use the 4600 instructions for the physical installation, see page 18:

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_dimension_desktops/dimension-4600_service%20manual_en-us.PDF

  Set the jumpers the second hard drive for "Cable Select" and connect it to the middle connector of the IDE data cable, which is attached to the main hard drive.
   
  After you have installed the reader, enter the setup and make sure the hard drive is set to Auto [on].

  To access the configuration, press the F2 key after a restart of the computer.

  For the details of the system configuration, go to page 34, here:

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_dimension_desktops/dimension-3000_service%20manual_en-us.PDF

  Use disk management to partition, format, and assign a drive letter on additional hard drive after installation for Windows to recognize the hard drive.

  Bev.

• I have a Dell Dimension 3000, service Pack3 & I would like to know how to reinstall the operating system xp professional?

  I have a Dell Dimension 3000, service Pack3 & I would like to know how to reinstall the operating system xp professional.

  Thank you

  Dee

  Check maual of the user of the ignition key (e.g. F11) you need to press on when you first ask the computer to access the XP restore partition. If you have a "restore CD" the game that the BIOS so that the CD-ROM drive is the 1st device to start, followed by the hard drive. then power on the computer and "press any key" when prompted to start the installation.

  J W Stuart: http://www.pagestart.com

• How to upgrade the virtual memory on my Dell Dimension 3000 running XP, now that I've upgraded to 2 GB RAM

  OK Hi everybody I have a Dell Dimension 3000 desktop pc / and I am running windows xp. in any case, I use to have 512 MB of ram but now I updated and I have 2 GB of ram. But before I updated I had in my performance, then the virtual memory settings and my custom settings it what should I change them for now to get me 2 GB of faster ram PLS HELP!
  * original title - PLS help me with my ram! *

  Set virtual memory to "System Managed size".

• VS1GB533D2 RAM Corsair will work in dell dimension 3000?

  New Ram

  will be a Corsair Memory VS1GB533D2 1 GB PC2-4200 533 MHz 240 pin DDR2 memory work on a dell dimension 3000 Desktop?

  and also it makes the computer go faster?

  It is absolutely essential that any new module of RAM is fully compatible with both the motherboard and/or any other module of RAM already in the system.  In addition, there are sometimes jumper switches on old motherboards that need to be reset for new configurations of the RAM.  Consult the manual of your motherboard or the web site of the manufacturer for specific instructions and compatibility requirements.

  If you can't get your hands on the manual of the computer and the manufacturer does not provide a support web site, you can use these utilities to help determine the right kind of RAM required:

  SiSoft Sandra
  http://www.SiSoftware.co.uk/index.php?dir=&location=sware_dl&lang=en

  Belarc Advisor
  http://www.Belarc.com/free_download.html

  Of AIDA32 of unlimited possibilities
  http://Forum.aumha.org/overflow/AIDA32.zip

  In addition, memory Crucial (www.crucial.com) website has a database to help find the right RAM for your specific brand and model computer or the motherboard.  (By the way, Crucial is the only company I have ever buy RAM.)  I've never been disappointed.)

• Replacement of a card mother Dell Dimension 3000 with a Dimension 4600 motherboard

  Recently I replaced my processor in my Dell Dimension 3000, however, at the start he always tells me that the processer is not supported by the Bios, so I still have to press F1 to start upward. I heard you can counter this is replacing the Board with a Board of a Dimension 4600 however, I know not what condition the Board of Directors must be in. Can I replace it with a Board of direct administration of a Dimension 4600 or what I need to get a referbished or the new Board of Directors?

  scprokop

  A work of a Dimension 4600 motherboard can be used, provided it is in a usable state.

  As the Dimension 4600 is obsolete for many years, I doubt there is very no new motherboards available, only the so-called "renovated" boards, which are 'pull system '.

  Bev.

• Latitide D810 - lost all sound with Windows 7

  Greetings!

  I recently installed Windows 7 Professional on my Dell Latitude D810. After installation, I've lost all the audio features. My volume control in the Quick Launch bar States, "no Audio output device is installed". I ran the "problems of detection" to try and fix the drivers, but it wasn't able to fix it.

  My next step is to check the drivers of Dell and downloads site and they do not have a driver for my computer with Windows 7. However, I have read on other sites that people have had any audio problems with installing Windows 7 on their Latitude D810s. Others have claimed to have had problems, but have been able to find the drivers for their audio problems.

  Through various websites and download, I tried the following driver executables: D810_A05.exe, R99254.exe and S1wua01i.exe. It's audio drivers I found for XP and Vista, but they no longer work.

  Does anyone else have other recommendations in pilot? Or links to other drivers, I can at least try?

  At this point, anything would be helpful! A lot of satisfaction and thanks in advance...

  See if it works:

  Download driver Sigmatel R99254. Unzip it but cancel the installation process. (Skip this step if you still have this driver).
  It will unzip the files and store them in a folder on the hard disk to c:\Dell\drivers\R99254, and this folder will be a subfolder named WDM.

  Open Device Manager and expand system down devices. Locate the PCI Device with one? next to it (or if it is not there, then look for "Multimedia Audio Controller"). Go to properties and select Update driver. Select to manually locate the driver and let Windows not seek.
  Go to c:\Dell\drivers\R99254\WDM

  With a bit of luck, it should detect new hardware, and one of them should be the Sigmatel.