VS1GB533D2 RAM Corsair will work in dell dimension 3000?

Similar Questions

• How to upgrade the virtual memory on my Dell Dimension 3000 running XP, now that I've upgraded to 2 GB RAM

  OK Hi everybody I have a Dell Dimension 3000 desktop pc / and I am running windows xp. in any case, I use to have 512 MB of ram but now I updated and I have 2 GB of ram. But before I updated I had in my performance, then the virtual memory settings and my custom settings it what should I change them for now to get me 2 GB of faster ram PLS HELP!
  * original title - PLS help me with my ram! *

  Set virtual memory to "System Managed size".

• Dell Dimension 3000 graphics card upgrade

  Hello, I'm new here and was hoping someone could help. I find anything through my research that directly responded to my questions/needs.

  I need to add a video/graphics card to my dell dimension 3000. The problem I have is that I don't know where to look or what to look for to know what is compatible or not. Any help would be greatly appreciated.

  The basic system specifications:

  Operating system
  MS Windows XP Home SP3 32-bit
  CENTRAL PROCESSING UNIT
  Intel Pentium 4
  Prescott 90nm technology
  RAM
  2.00 GB Dual-Channel DDR @ 166 MHz (2, 5-3-3-7)
  Motherboard
  Dell Computer Corp. 0N6381 (microprocessor)
  Graphics
  Acer V173 (1280x1024@60Hz)
  Intel (r) 82865G Graphics Controller
  Hard drives
  156GB Western Digital WDC WD1600AAJB-00J3A0 (PATA) 96 ° F
  Optical drives
  Optiarc DVD RW AD-7200 has
  TSSTcorp CDDVDW SH-S222A
  Audio
  Unimodem half-duplex Audio device 

  Best regards, John

  With an older system like the 3000, you will only be able to use the old PCI interface for a video card.  These cards are more expensive and there is no reason to spend too much on an upgrade when dealing with older systems like that. Popular cards have been the 6200 Nvidia 8400 GS or the best 9400 GT.  Do not forget only the PCI interface.  No AGP or PCI Express.

  I'm not sure what your goal is the upgrade, but don't expect too much.  I know that people have upgraded to these cards to play games like the Sims.  Your system is just old with old parties slow and he can't move much faster with a video card.  You have 3 PCI slots on the motherboard.  Put the card into the top slot of most and move all other cards down lower if installed.  You should probably disable your chart integrated through your device manager before installing a video card for it to work and make sure that the first video is correct in the bios.

• Question for Dell Dimension 3000 IDE connector

  Hello

  I'm not sure if this is the right place to post, but please be patient with me. I have a loyal Dell Dimension 3000, 2 GB RAM, P4 processor, 1x250GB HDD burners 2xDVD-R, 1x3.5in floppy drive hard.

  My Question is how to be able to add a second HDD. I have no way to connect to one. The cable I have all what it connects to the current. There is no way with my current cable to connect a second HDD. I don't know what type of connector IDE cable I need or where to buy it, or if there is even an option to one.

  I have the tray and extra HDD ready and waiting but no way to connect. Any help is greatly appreciated.

  John Briggs

  The dimension 3000 will support two hard drives, but you will need support for additional hard drive and one connector three IDE 18 "L, 80-wire cable in water data, which is connected to the primary IDE hard drive and motherboard J6J2 PRI IDE connector, see page 38

  Dimension 3000 second hard drive installation.

  There are no instructions for the installation of a second IDE/EIDE hard drive in dimension 3000, but as the Dimension 4600 has the same case and chassis, you can use the 4600 instructions for the physical installation, see page 18:

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_dimension_desktops/dimension-4600_service%20manual_en-us.PDF

  Set the jumpers the second hard drive for "Cable Select" and connect it to the middle connector of the IDE data cable, which is attached to the main hard drive.
   
  After you have installed the reader, enter the setup and make sure the hard drive is set to Auto [on].

  To access the configuration, press the F2 key after a restart of the computer.

  For the details of the system configuration, go to page 34, here:

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_dimension_desktops/dimension-3000_service%20manual_en-us.PDF

  Use disk management to partition, format, and assign a drive letter on additional hard drive after installation for Windows to recognize the hard drive.

  Bev.

• Dell Dimension 3000 mysterious starts.

  I have a Dell Dimension 3000 running Windows XP Home Edition. He suddenly began to automatically start shortly after midnight each day.

  Hi ColinArmstrong,

  Thanks for posting in the Microsoft Community forum. I'm sorry to hear that the computer automatically restarts during the night mi.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

   

  1. don't organize you all tasks restart the computer?

  2 has there been recent changes made on the computer before the show?

  3. is the computer is off or did you put the computer to sleep before it restarts itself?

   

  I suggest to check the Task Scheduler and make sure that you don't have something on demand for all night that making your restart the computer.

  You can find the Task Scheduler by clicking the Start button, click on the Control Panel, clicking system and security, clicking Administrative Tools, and then double-click Task Scheduler.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Replacement of a card mother Dell Dimension 3000 with a Dimension 4600 motherboard

  Recently I replaced my processor in my Dell Dimension 3000, however, at the start he always tells me that the processer is not supported by the Bios, so I still have to press F1 to start upward. I heard you can counter this is replacing the Board with a Board of a Dimension 4600 however, I know not what condition the Board of Directors must be in. Can I replace it with a Board of direct administration of a Dimension 4600 or what I need to get a referbished or the new Board of Directors?

  scprokop

  A work of a Dimension 4600 motherboard can be used, provided it is in a usable state.

  As the Dimension 4600 is obsolete for many years, I doubt there is very no new motherboards available, only the so-called "renovated" boards, which are 'pull system '.

  Bev.

• I have a Dell Dimension 3000, service Pack3 & I would like to know how to reinstall the operating system xp professional?

  I have a Dell Dimension 3000, service Pack3 & I would like to know how to reinstall the operating system xp professional.

  Thank you

  Dee

  Check maual of the user of the ignition key (e.g. F11) you need to press on when you first ask the computer to access the XP restore partition. If you have a "restore CD" the game that the BIOS so that the CD-ROM drive is the 1st device to start, followed by the hard drive. then power on the computer and "press any key" when prompted to start the installation.

  J W Stuart: http://www.pagestart.com

• Cannot delete the printer in Dell dimension 3000 XP Home Edition 32 bit race.

  Original title: have dell dimension 3000 with xp home 32-bit edition.

  have 3 old printers in Control Panel I can't remove... mike

  Hello

  1. what happens when you try to delete the printers?

  2. do you get an error message?

  3 are logged as administrator?

  I suggest you to start the computer in safe mode , and then try to delete the printers.

  To start the computer in safe mode

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Hope this helps and let us know if you need more assistance.

• I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service is not...

  Original title: Journal of spooler

  I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service does not exist or has been marked for deletion. I tried this diagnosticTo start print spooler service and also long-term arer services set it to automatic, follow these steps.     a. Click Start, right click on my computer and select manage.  b. in the console that opens, expand the menu Services and applications.  c. click Services.  d. click the button twice to spool print.  e. in the 'Général' tab, go to Startup Type.  f. the Automatic value.  g. click on the Start button.  h. click on apply and Ok.     Click the Dependencies tab, and not all the dependency services and repeat the steps above to set automatic and start the service.      Restart the computer after you start the services above. After restarting the computer check if you can install the printer. And a few others. Someone at - it suggestions? This printer has been operational on this computer at any given time. Windows XP Home / Firefox. .:

  Hello

  1. don't you make changes on the computer before this problem?
  2. when exactly you get this error message?

  Step 1: Run the fix it tool using the article below and check out them.

  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

  Step 2: Try the steps from the article below and check out them.

  Error message when you try to start the spooler service for printing on a Windows XP-based computer: "error 1075.
  http://support.Microsoft.com/kb/915168/en-GB

• My external CD/DVD burner does not work with Dell Dimension 2400 XP

  I have a Dell Dimension 2400 desktop but the CD-ROM supplied with the PC is no longer works it is stock and does not open, this is the reason why I had to buy an external which has the Maxtor 6E040L0 pilot, he worked for a while but don't any more. It is listed in the Device Manager and indicates that the device is working correctly, it is also listed in my computer, in the tag properties indicates it works. What can I do? I am not informed PC and don't have the money to hire a technician. Please, I beg you! Help. Thank you.

  Jose

  Hi JoseCedeno,

  See the following troubleshooting article:

  http://support.Microsoft.com/kb/982116

  I hope this helps!

• Ethernet driver does not work on Dell Dimension 8520 after Windows XP install.

  Ethernet driver does not not on my Dell Dimension 8520. I reinstalled Windows XP and drivers, and everything works except drivers Ethernet and those. They have big yellow points to mark by them. Tried to delete and restart, but they come back and still do not work.

  I don't see anything for 8520 dimension on the Dell web site.  Windows XP for Dimension 8250 drivers are here .

• These ram cards will work with my hp pavilion a1700n PC

  I bought a set of ram cards and they do not work with my pc. I just want to make sure that these maps will work before I buy them my pc specs here is http://support.hp.com/us-en/document/c00820191 cards are off to ebay here http://www.ebay.com/itm/190687891922?ssPageName=STRK:MEWAX:IT & _trksid = p3984.m1438.l2649 #ht_2222wt_93... I think they will, but I just want to be sure they will thank you first.

  According to the specs, it seems that PNY memory referenced in your post should work. Your motherboard accepts up to 4 x 1 GB PC2-4200 or PC2-5300 240pin DIMM and the PNY DIMM are 2 x 1 GB PC2-5300, 240pin.

  Frank

• This block of power SUPPLY Corsair will work in desktop XPS 8700?

  Hello friends,

  I really really wanted to buy the 8700 XPS because the tower is much better and lighter then the Alienware Aurora. But I wanted to know if this PSU Corsair AX760w will be perfectly compatible with the Dell XPS 8700? I wanted to update the 8700 460w POWER supply because I want to update the graphics card for a black titan Nvidia requiring 600w.

  THX

  There isn't one, perhaps that's a Yes. It is perfectly well... a little on the tight side but he did it with a bit of room to spare. I know what I'm talking about. I installed the AX760 in February in my xps8700se and it has worked perfectly since.

  Don't hesitate because this diet is one of the better ones.

• What DVD - Ram drive will work in Satellite M30-642

  Hello

  hope someone can help me.
  As my carpet * a drives DVD is out of order, I want to buy a new. So I search the www for some. But I don't know if the disks I found work in my M30 (I need a bootable DVD drive). These are the discs that I found:
  -Plextor PX-608AL
  -NEC AD - 7543 HAS
  -NEC AD - 7540 HAS
  -NEC ND-7750GEN
  -Samsung SN-S082D
  -Panasonic UJ-846

  Hope, anyone know if one of these drives will not work in my M30. If not is there any other player?

  Thanks for your help.

  Greetings
  OLAF

  Post edited by: Ollek

  Unfortunately, the M30 road parameters are unknown for me. I want to say I put t know if the drive supports a master, slave, or c - salt settings but I've studied a bit on the net and found many compatible players!

  -Matu * a G8CC0001C210
  -Matsu * a G8CC00019210
  -TEAC G8CC00013210
  -Toshiba SD-R6112
  -TEAC G8CC00013210

  Here is a strange number, but it seems that these are the numbers of in-house production. Who knows?  :|

• I lost all sound on my dell dimension 3000

  No devices available in the volume controls mixer

  Hello

  go to dell reinstall the driver sound http://support.dell.com/support/downloads/driverslist.aspx?c=us&l=en&s=gen&ServiceTag=&SystemID=DIM_CEL_3000&os=WW1&osl=EN&catid=&impid

  Please click the checkbox as replied on this Page if this post solves your problem, as it helps others who need quick access to the answers THANKS AND GOOD LUCK