I lost Pad wfi conection

Similar Questions

• Conection lost to esp5200 kodak printer signal is excellent and still high tower failed to connect.

  can't conect printer

  conection lost to esp5200 kodak printer signal is excellent and still lap top cant conect

  Hi FrancesFlores,

  ·         What operating system is installed on your computer?

  ·         What happens when you try to connect to the printer? You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  Please answer the following questions so that we offer in addition to the steps to solve the problem of troubleshooting.

  During this time, you can consult the following articles and check.

  Install a printer on a home network

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

   

  Share a printer

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information helps.

• printer lost conection with laptop

  computer HP laptop with windows7 lost conection with 8600 pro hp office jet all-in-one. works for awhile then stops. the advice printer unable to communicate. Unplug the printer from pwr.source 30 seconds reconnect printer works & then work communicate after 30 min.

  You will need to access the router to see if it is connected.  Call Verizon to help with this.  I suggest you try the settings a static IP address in the printer outside the range of the DHCP of the router to see if it works.

• lost touch pad dell drivers after installing Windows updates.

  Separated from this thread.

  I did the update and lost contact dell drivers pad and now I can't play all the games that I got on the computer. The previous update lost my sound card drivers.

  Hi Craig,.

  Thanks for posting your question in the Microsoft Community forums.

  I'm sorry to know that you are facing problems after installing Windows updates.

  Any Windows specific update which is the origin of the problem or you face the problem after installing updates? This is to check if the updates you receive are associated with hard devices.

  To view your history of update, follow these steps:
  a. open Windows Update by sliding into the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), tapping or clicking on settings, tapping or clicking change PC settingsand then by typing or clicking on update and recovery.

  b. press or click view update history.

  I wish that you install the Dell Web site touchpad drivers.

  You can refer to this article for the procedure: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=1JW07

  In addition, if all of the updates are at the origin of the problems with the hardware on the PC, then I suggest you also update the drivers from the Dell Web site chipset.
  See the article:

  Download and update drivers
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• I lost my I pad I put lost mode but it is offline when I should delete

  I lost my Ipad 2 days ago Friday highlight mode lost Saturday he still will conclude not just her because she is in offline mode. If I delete what exactly is erased? My photos are all on Icloud will remain. I should erase everything because that I won't be able to trace the it.

  If she is lost in a phone call from Messenger Cross and when you apply the lost mode sound this sound play?

• Satellite L350 updated Bios to pad 2.1 and lost

  Hello

  As indicated above for the update Bios to 2.1 later I lost the functionality of numeric keypad, not the right side as if it were a good keyboard.
  The above keys work IE delete scroll etc.

  The numlock light does not illuminate, but it does if I activate the keys on the stretch main qwerrty.
  Is their any way to reload the bios it won't let me because I have the latest or downgrade may not be like that until anothrer update.

  By the wy am Windows 7 any info would be greatly apreciated thanks

  Hello

  Normally you press Numlock on the keyboard to enable it.
  Check this box!

  If it s not working do not you should load the default settings in the BIOS. Maybe it works.

  Last but not least just be sure it s not a hardware problem, can test you it with the factory settings?

• Hi I have a problem, my drive hard think pad (T400s) is lost

  Hi guys

  I think pad T400s and a hard disk problem and I want to buy a hard drive, but it does not exist in the site of lenovo

  and I have a question about hard drive!

  I canoe find hard for my device suituble you please help me what I do

  my model is T400S 2808-DEG and my drive 1.8 "

  Please please please

  You initially had a 250 GB 5400 RPM drive. This drive on eBay is the same:

  http://www.eBay.com/ITM/1-8-MK2529GSG-250GB-5400-RPM-HDD1F07-hard-drive-for-IBM-X300-X301-T400S-/190...

• I lost myinternet conection handly iretrieve it

  I lost my Internet how to recover it

  Hello

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would be grateful if you could help me with more information.

  • When was the last time it was working fine?
  • Remember to make changes to the computer before this problem?
  • Is there an error when you try to connect to the internet? If so, what is it?
  • You use a third-party security software?

  You may consult:

  Wireless and wired network problems

  Do not respond with the required information. We will be happy to help you on the issue.

• Padding and background settings lost

  I'm working on a MacBooPro OS 10.6.8 with InDesign CS5.

  I built a 257 pages in 6 "x 9" format with facing pages. Some pages have lots of bleeding graphics so I put the purge of all edges to 0.125 "(1/8"). " When I make a PDF of the presentation, however, the padding is strange. Instead of having a good serving, some of the page is assigned to the page. (see attached images).

  I'm doing something wrong? How a book full of adjustable vent upwards so that each page has a bleeding in the gutter, rather than part of the neighbors page?

  Marc

  

  This might help with the taxation and objects that have hit the gutter and why you don't need to make adjustments in your pagelayout or worry about bleeding from the inside. These come from the imposition of 16 simple page out of ImposerPro where I have exaggerated the amount of creep that impose apply. You can see what is happening to the image even crossover on 2-3 against 8-9:

  

  

  

• Why is my Internet Conection keeps disconecting. It seems back to the top of almose immediately, but not before all that I am in, games, e-mail lettrs etc. is lost?

  Hate losing unexpected connections.  Help

  Hi Jamie,

  I see this is your first post in this forum, welcome to the Microsoft Community forum.

  I have a few questions first, to get a clear picture of the issue:

  (1) he started on it recently? Remember to make changes to the computer before this problem?

  (2) are you connected to the Internet via a wireless or Ethernet connection?

  (3) you get an error when you lose the internet connection?

  If the Internet connection gets disconnected frequently, it could be either because of some incorrect settings in the computer, or due to a problem with the network itself. I suggest you to try the steps mentioned in this article troubleshooting and audit:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab4&V3H=winvistatab1&v4h=winxptab1

  Try these steps and let us know the results. If the problem persists, please get back to us more information, so that we can help you accordingly.

• lost my ipad on 26 September on resting on 285

  I lost my I - Pad 26 September 2016 on Route 285, approximately 16 miles north of Salida.

  I went by mistake in a black DODGE CARRAVAN having the same color and shape for my car parked next to him. A man with his son came to warn me of my mistake. His mother remained at the picnic table.

  I left the car without taking my IPad. The owner must contact me

  anyone has a suggestion how to get back the IPad?

  < emails published by host >

  Nothing to report

• I'm stuck on my I Pad, he holds a lock of securty on it asking me to id and password mi icloud. I tried to use my apple ID and it doesn't work how I eaither find or reset it

  I'm stuck on my I pad for security reasons. I lost my key for almost a year and just found it. I don't remember my icloud or id password I know my apple ID and password but it doesnot work on my i pad please help.

  In many cases the Apple ID is identical to the iCloud ID - if yours does not then.

  1, when you try to connect to the iPad it should show you the first letter of the email and the domain name such as m***@disney.com - I hope that your memory can jog

  2. If this does not work - try this link-

  Forgotten ID Apple

  3. If you do not have success there either - you will have to

  Contact Apple security - Apple Support

• Satellite L50 - B - lost touchpad pinch and scroll functions

  One day I realized that I had lost pinch and scroll on my touch pad functions. Do not know why.
  So I tried to install a Synaptics Touchpad driver. This provided the missing functions but got delayed cursor and the sensitivity of the touch pad is limited to a certain place. So I uninstalled the synaptic driver again.
  The sensitivity has published healed but I still had no function of pinching and scrolling on the touchpad.
  So, I went on the download site of Toshiba and learned that the pilot of the ALPS was the original driver.
  I tried to install this driver (as requested for 64-bit).
  The installation seems to go smoothly. After start-up, there is still no functionality of pinching and scrolling and anywhere the driver is found neither in the list programs or added to the 'mouse' screen in the functions of the system folder.

  How can I get that pinch, zoom in and do scroll back to my touchpad functions?

  This looks like interference of program, you will need to perform a clean boot and disable the firewall and antivirus and then try and install the driver. Here is a description on how to perform a clean boot, https://support.microsoft.com/en-us/kb/929135

• Satellite A200-1AE: How can I configure the settings of buttons Dual Mode Pad?

  Hello

  I recently bought a Satellite A200-1AE. I tried to configure the default first button on my touch pad (lower left) so that I can fire up MSWord, but it did not work.

  Now every time I have set the mode button and press this button, that nothing not to pass - I lost practically this button.

  My question is how can I configure the mode button on the touch pad settings? Even if I was able to start a program by using the 3 buttons how can I modify these programs?

  Thanks for your help!

  p.s. I read the extended version of the manual for my laptop. There is no explanation of my problem - it says I should look "Synaptics Dual Mode Pad properties.

  I don't know where are these properties.

  Hello

  It s is not so difficult as you think, the properties of the synaptics are in the "mouse properties" of your "Control Panel" of windows. When you reach the 'mouse', then click on the "Advanced" tab and you should find a button 'Advanced functionality settings'.
  It could be that the button is not named as mine, but it must be identical.
  After clicking on it, you should look for this 'easy' Launcher in one of the tabs.

  I think that you will make it, but I'd like some feedback from you.

  Welcome them

• NB100 - lost the use of the mouse

  Hi all
  First post (Please be nice...).

  I work for a college in Nottingham, UK. We ordered and received 50 x NB100. At arrival we have returned to image drives in XP Home, XP Pro (as is the standard operating system for all facilities of the College). Things were fine until the last two days when 2 NB-100 have suddenly lost the use of the mouse pad.

  They work very well with an external mouse. They were outside the internal IT Department, and they seem to think they are well broken. I don't think they are as if it is 2 I guess it may be a driver/software problem?

  All advice welcome...

  Alex

  Hi Alex,

  I assume you mean the touchpad rather mousepad? The mouse pad has nothing to do with the laptop, it can easily be replaced by another =)

  Anyway, if an external mouse works, you must press FN + F9 key combination. With this combination the touchpad can be turned on/off.
  Check this box!