I'm getting "0xC004C003 key is blocked" in my event viewer and the 'not genuine' wallpaper

Similar Questions

• I get a message telling me go download 1 update and do not unplug or turn off the computer.

  I get a message not to unplug or turn off the computer until 1 update is complete.  After 3 hours, the same message appears and nothing has been updated.  WHA'ts the problem?  Thanks-John

  Please provide more information for your issue to be diagnosed.

  Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• How can I get Firefox saves my my hotmail MSN live login and the password

  How can I get Firefox saves my my hotmail MSN live login and the password,.
  My settings are all correct and must be saving them, but for some reason that it is the only account that it won't save.

  Hello

  1. what version of Firefox are you using?

  I would recommend that you follow the steps in this article.

  http://support.Mozilla.com/en-us/KB/make-Firefox-remember-usernames-and-passwords

• Started getting a message that says that my version of Windows is not genuine

  I started getting a message that says that my version of Windows is not genuine. Why would it be?

  Not authentic OT:Windows

  Hello

  Thanks for posting in the Microsoft community!

  The description of the question, I understand that you found Windows is not genuine. I'll be happy to help you on this question.

  You made any hardware or software comes to the computer before the show?

  Let us try the steps from the following links:

  Genuine Windows: Frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows/help/genuine/FAQ

  The Windows Genuine Advantage validation is required when you download Windows updates
  http://support.Microsoft.com/kb/932348

  After trying the steps above suggested, giving us the results. If you are able to solve problem of Microsoft Genuine advantage or post us additional troubleshooting results.

• MSN - CRASH - TECH MSN TOLD - not able to use msn and I get a msg in the event viewer that the error is NTDLL. DLL

  MSN TECH SAID TELL WINDOWS CE PROBLEM I am STICK - not able to use msn and I get a msg in the event viewer that the error is NTDLL. DLL and talked with msn. Called MSN windows Dept. -How can I correct this situation?

  Hello

  Did you change your computer?

  Method 1:

  I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to follow the link and check.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Hello. I have the CC of LR 2015 version. It downloads fine, but when I try to open the application, I get a message saying: "an internal error has occurred" and "could not create the required folder: / users/celinserbo/library/application support/adobe/li

  Hello. I have the CC of LR 2015 version. It downloads fine, but when I try to open the application, I get a message saying: "an internal error has occurred" and "could not create the required folder: / users/celinserbo/library/application support/adobe/lightroom/develop presets." I tried disconnecting and then signing unistalling the app and back in and resettlement. nothing seems to work. any help would be appreciated.

  Cannot create the folder means that you don't have WRITE permission for this folder. Then... change your permissions.

• NTFS bad block errors in Event Viewer

  I have a Dell 510 m with XP and a Toshiba HD. There are a few bad blocks that I see with the Diagnostic CD. They have not worsened in recent years. Recently, I saw a few 'Bad Block' errors in the event viewer. Diianostic CD shows me a bad block as before.

  My question is: when the Bad Block error, is to say that the ranking system, NTFS marked which also block bad, so he's not getting used again?  Otherwise, CHKDSK (the /R option?) will find the new bad block and mark it unusable?  If not, is there a way to do this?

  There is no option to replace the HD. I just need to keep this laptop going long enough to decide what to buy to replace.

  Thank you

  Peter

  Peter

  24 KB in bad sectors. = 6 clusters currently is not a serious problem. However, you must check regularly for some time to ensure that the number does not increase.

  Of course, any bad cluster can be bad news if it coincides with the location of a vital system file.

  You must also use chkdsk for repairs under this part of the report:
  Correcting errors in the Volume Bitmap.
  Windows found problems with the file system.
  Run CHKDSK with the /F (fix) option to correct these.

  Edit, Find with Volume Bitmap use search for more information:
  http://en.Wikipedia.org/wiki/Hierarchical_File_System

• It comes to DEME past in FireFox, the tetter to the right of the key 'k' is coding as a 't' and the next key to the right is coding as an "F".

  It is DEME past in FireFox, the 'L' key is like a 't' and the key encoding ';' is coding as an "f". At first, I thought that my keyboard came out, but Firefox is the only program that does this. All other keys seem to work correctly. This question reads correctly because I wrote in wordpad and copied in FireFox.

  Have you tried restarting the computer?

  It is possible that you have activated the keyboard by accident using the sequence of keys to rotate the page layout.

  • http://support.microsoft.com/kb/258824 - how to change your keyboard type

  Windows remembers the setting by application keyboard layout and you have probably changed the keyboard by accident via a keyboard shortcut.

  • http://Windows.Microsoft.com/en-us/Windows7/the-language-bar-overview The language bar (overview)
  • Make sure you have the language bar visible on the Windows taskbar
  • You can do this via the context menu of the taskbar: toolbars > language bar
  • Check the language setting (keyboard) keyboard for the application that has focus via the icon in the language bar
  • You need to do that while Firefox has focus because Windows remember the keyboard by application setting
  • The combination of default keys to rotate the disposal is the Ctrl + Shift or Alt + Shift key combination that is used in Firefox to the menu items, so it is quite possible to accidentally changing the layout.
  • To avoid an unintended switch, assign a specific keystroke (Alt / Ctrl + Shift + number) to select keyboard layouts and remove the key combination to rotate (Alt + Shift or Ctrl + Shift) layouts
  • Control Panel > regional and Language Options > keyboards and languages > change keyboards > advanced key settings > change key sequence

• Windows has blocked a potentially dangerous file and will not allow him to ti be installed from canon printers

  Windows called a potentially dangerous file and will not be installed, it is from the canon printers, how can I install it?
  Windows has blocked data access cab 1

  Hello

  1. which version of the operating system you are using on the computer?
  2. What is the accurate and complete error message that you receive?
  3. have you made changes on the computer before the computer?
  4. are you trying to install the printer software\downloading turn off the internet?

  Method 1:
  You may need to download the correct driver\software from the manufacturer's website only.

  Method 2:
  You can perform the clean boot and try to install and check:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  Method 3:
  You can disable the security software and check
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• I reinstalled xp, now get the 'not genuine message' how can I fix this, please?

  Hi, I had to reinstall xp because of a problem I had, now I'm getting the 'non-genuine message' and he failed the validation test. Would it because I don't the have not enabled?  How can I fix this?

  Pleant of assistance needed, please?

  Thanks in advance

  Try the activation of the phone - how to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the letters and numbers (number 8 for the)
  Letter B, etc.).

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once active - Windows Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• Get a message saying that my version of Windows Vista is not genuine.

  Issue of Windows Vista.

  I just did a cover of my Toshiba Satellite A205-S5855 laptop, and it displays a message saying that my version of Windows Vista is not genuine. He asks me a key that I don't have. How can I solve this?

  You need a key at the bottom of the laptop.  If this is not the case, how did the laptop?

• Impossible to get my 3560G switch talk to ESX 3.5 and the EMC NAS servers.

  I tried for the past two weeks to get my 3560G switch to talk to a couple of ESX 3.5 servers, but VC and the EMC NAS. The goal is to implement 2 Etherchannels on the physical switch and aggregation of NETWORK cards on the vSwitch. A port-channel will have 1 VLAN it crosses, and the other port-channel will have 2 VLANS across it. VLANS have been implemented on the vSwitch mirror the VLAN I have on the 3560G. I want to (have to) use the load balancing. Also, I read other forums and websites to get ideas on how to implement, and every solution is different from the other. The problem seems to reside mainly in the configuration of VLAN on the physical switch in my humble OPINION, because if I just switch a switch, dummy can talk without problem. The following information, I already know, not because it's my requirement, but rather the parts that must be present for the entire configuration to succeed.

  All interfaces in an Etherchannel must belong to the same VLAN or considered trunks. I take this means that for the second port-channel, I have to configure interfaces as the trunks, since I need 2 VLAN different to go the link.  -I tried to configure them as trunks and the ports of access, and none seemed to work.

  vSwitch must be configured to "Route based on the hash of the intellectual property."

  port-channel - the load balancing must use the src-dst-ip option.

  FlowControl receive desired must be set

  Jumbo mtu 9000 system must be set to

  Here is an excerpt of my configuration:

  src-dst-ip port-channel load-balance

  No file verify auto

  pvst spanning-tree mode

  spanning tree extend id-system

  !

  internal allocation policy of VLAN ascendant

  !

  Interface Port-Channel 1 - Port-canal2 is configured similarly to this one.

  switchport trunk dot1q encap

  switchport vlan trunk native 2

  switchport trunk allow 3 - Po2 allows instead of VLAN 4.5

  switchport mode trunk

  !

  interface Gigabitethernet0/1-gi0/1 - 20 are configured similarly to this one.

  switchport trunk dot1q encap

  switchport vlan trunk native 2

  switchport trunk 3 - gi0/13 - 14 permits vlan 4 and gi0/15-20 allow vlan 5

  switchport mode trunk

  FlowControl receive desired

  channel-group mode 1 on

  !

  Interface Gigabitethernet0/21 - 28 are stop

  !

  interface Vlan1

  no ip address

  Shutdown

  !

  interface Vlan2

  IP address x.x.1.2 255.255.255.0

  !

  interface Vlan3 - 5 are configured identically

  no ip address

  !

  IP default-gateway x.x.1.1

  This should be enough to give you an idea about where I am and where I belong. Any information you can provide would be greatly appreciated!

  Hello

  You config works without using etherchannel?

  On the ESX, I think that the vlan native is 0, you describe that?

  In addition, you use the 3560 as layer pΘriphΘrique layer-3 2, right?

  Reza

• Question: I have an album that I built in PhotoShop Elements and I want to copy it to a CD, DVD or memory key. I am using a Mac and have not been able to find out how to accomplish this task. Help!

  Question: I have an album that I built in PhotoShop Elements in a Mac. How it copy it to a CD, DVD or memory key?

  Click on the name of the album and use Cmd + A to select all the thumbnails, then go to the top menu:

  File > export as a new

  Choose the file type, the size and the quality of your copies and then click on the Browse button and navigate to your Media Player.

• Could not get recognization speech to work on my ipad 3 in the notes, do I have to be on WiFi?

  New to Apple, PC used for 30 years.  Ask a few questions.

  How to find what operating system I have on Ipad 3 w / 32g. 27g free?

  Can't get speech recognition to work on notes, I have to be on WiFi to use it?

  Yes, speech-to-text requires data, either WiFi or cellular connection if your iPad which takes in charge.

  To know your iPad, go to settings > general > about.

• I get an error (0x800C0133) message when opening outlook express and can not receive emails

  An unknown error has occurred. Account: 'mail.homeloansokc.com', server: 'mail.homeloansokc.com', Protocol: POP3, Port: 110, secure (SSL): no, error number: 0x800C0133 the previous message is the complete error message I get when trying to open Outlook Express.  I can send but cannot receive mail.  The box pop up you will receiver 1 of 68 messages but stops before it downloads all messages and displays the error message.

  Error number: 0x800C0133 = a corrupt Inbox.
   
  Move any message you want to save to a local folder that you create. Then, remove the problem of Inbox as follows.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
   
  With OE closed, find the box of Inbox.dbx and delete it. Another will be created automatically when you open OE.
   
  General precautions for Outlook Express:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3