I'm having a difficult time to audio from the videos I recorded from my camera

Similar Questions

• I deleted from the temporary folder and now my microphone and camera do not work, the audio and the video hangs when activated

  C:\Users\John\AppData\Local\Temp and emptied, had like 20 GB of misc * in there, when I deleted it no error came, nothing has been locked. then when I didn't try to use my webcam (creative Webcam live pro v280) the audio and the video freezes as if taken in too much data to be processed during recording, and when I try to speak, it comes out as a big sound introduction text that's noise and videos recorded is accelerated as a 10 x. I bought a new webcam installed and everything went well, and exactly the same thing happened. (microsoft livecam this time) no sound. Anyone have any ideas?

  Hi Johnny,.

  Perform the System Restore to an earlier date and check if it helps.

  System restore

  System Restore can return programs and system files from your PC to a time when everything was working well. This will not affect your documents, images or other data.

  Hope this information helps.

• When I download a WMV file on a website and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.

  When I download a wmv on an internet site and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.  I was told that the media player can miss a card.

  Hello

  1. what operating system is installed on the computer?
  2. are you able to play videos other than video .wmv successfully?
  3. don't you make changes to the computer before the show?

  Method 1
  I suggest you to check if the hardware acceleration of the display device setting is too high.
  a. Click Start, click Run, type desk.cpl and then click OK.

  b. click on the settings tab and then click Advanced.

  c. click the Troubleshooting tab, and then move the hardware acceleration to none.

  d. click on apply and then click OK twice.

  e. If the problem is resolved after you move the slider hardware acceleration to none, contact the manufacturer of the graphics adapter driver to determine if there is an update that resolves this specific problem.

  Method 2
  The required codec is missing or damaged. If the problem occurs when you use a .wmv file, download or reinstall the latest version of Windows Media Player. If you use an earlier version of Windows Media Player, upgrade to the current version of Windows Media Player for your operating system.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player

  If the problem occurs when you use a different format of video file, for example a .mpeg file or an .avi file, download or reinstall the appropriate third-party codec.

  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Note: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

• First Pro exports only my audio, not the video

  I'm a beginner to this program, so please bear with me.  I'm in first Pro CC (2015.3) v 10.3, blue Fox on a PC with Windows 7 Pro. The Media Encoder is also Media Encoder CC (2015.3). When I queue to export the Audio/video file, I chose H.264 and AAC Audio.  The video and audio of boxes are ticked for export.  I have the game - high-speed selected Source and preset of Facebook.  Is the screenshot after I encoded the file, but I am able to see the process of Audio and video, while it exports the file.

  Here is the screenshot of my Premier Pro screen. I had created a couple of these slide shows before and everything worked very well.  Now for some reason, there is only Audio now.  I tried it with two series of photographs with the same results.

  Any help is appreciated and I apologize if this is a repeat problem, but I don't see anything that fits my situation specifically.

  When you are working in a new project (or new sequence) and you add the first piece of media in your timeline (sequence), if the media card to match the settings of the sequence, it will ask you "Do you want to change the sequence to match the media" and you have done this, no other way to get an image size of 4608 x 3456, which is not equal to any standard video format. Is also 4:3 and not 16:9 for the video output screen. So unfortunately, if the configuration of the sequence is bad at first, your project is built on a poor Foundation that will cause problems later when you try to export to a standard format.

  If you want to put the video on Facebook, that would be 1920 x 1080 or 1280 x 720 for instance (1080 p or 720 p). Your sequence should be created accordingly before adding any media. In Prefs or sequence by sequence, you can use the size value of the frame to have the media scale in sequence (photos/video will scale to fit the image).

  Try changing the size of the image in your sequence up to 1920 x 1080 settings. You may need to click on the pictures and also the value size of the frame.

  EDIT: also change the audio sample rate of 32000 to 48000 which is more standard and superior

  EDIT 2: If you put 4:3 pictures in a 16:9 frame, yes you get black bars on the sides. As the top and bottom of the pictures of the boat may be just the water and the sky in any case, you can change the image until it fits left to right, cropping the top and bottom which you can't miss anyway. Can also set vertically then necessary. Use the Adobe movement controls for these actions, found in the effect controls panel.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• some parts of the audio of the video do not play on all devices

  I recently exported a video in first pro through media encoder.  It played fine on my computer.  The video begins with a bumper with audio and then goes to a speaking spokesperson.  I then downloaded on youtube and yet once again, everything was going well for me.  But then I heard from a colleague that he could hear the audio during the bumper, but once the person got on the screen he had no audio data.  I've never run into something like this before.  I went to check and found that if I watched the video on firefox, it worked but not through google chrome (though chrome worked for me).  I thought it was a weird extension or something that she had installed that might have been originally it and don't worry.  Hey well last night our posted the video on facebook and youtube social media person arrived again reports the same behavior but this time it was on several aircraft types.

  I used the 1080 p vimeo export preset in media encoding.  Everyone has faced something like this before?  This is the first time for me and just baffles me.  I think that if we could hear the intro music you should hear all audio - it's all an audio track.  But I guess I'm wrong?

  I found the problem.  It turns out that it was a problem of phase cancellation.  When the audio has been converted to a stereo left mono signal and tracks right were to cancel each other.

• My hdmi cable transmits is no longer the audio with the video, how can I get audio to transmit

  Why the audio transmitted with the video, it is used to

  Hello

  Open windows control panel, open Device Manager and open display devices - note equipment listed here i.e. ATI, NVidia or Intel.

  Then connect your laptop via HDMI to your TV.  Do a right-click the speaker icon in the taskbar, and select playback devices.  Click once on the left (just to point out the entrance), the HDMI output that has the same name as your graphics card, and then click the set as default button, see if you now audio through the HDMI connection.

  Kind regards

  DP - K

• SX10 problem with sending audio with the video presentation

  I recently deployed a Cisco SX10 and found a fault, that I can't understand. When sharing content with extreme of end users, they can see the video but don't get no audio. I checked the settings and I'm confused as to what is misconfigured.

  I checked the bases, wiring, volume, and the settings in the codec it resembles a simple set up. When I introduce locally I have the same problem - no sound from the TV.

  Any ideas?

  Looking at the Guide of Installation SX10 on pg 5.  The SX10 is not an audio connector dedicated to the VGA input, since doesn't send VGA audio you need an additional input for audio.  I test using the HDMI input, and I heard audio locally and on the far - end, since HDMI will send video and audio together.

• When I add a video on my calendar, it allows only the audio, not the video. It is in MOV format.

  I'm working on my first project with elements first, and when I add a video to my computer, it will add it only for audio, not the film section. All my files are in MOV format. I am able to open the same file in Microsoft Movie Maker, but not in the first of the elements.

  geigerlau

  Your specifications video camera and your lack of QuickTime presets, it's almost a certainty that the installation of the first Elements needed as QuickTime will solve your problem.

  What could be your problem is the use of a video codec MotionJPEG for your video. Your camera seems to offer MotionJPEG video codec, but only as an .avi file. The video codec that goes with the file from your camera .mov is H.264. Thus, with an extension of the .mov file, you do not have the question common to Premiere Elements MotionJPEG any version.

  Please let us know if the installation of QuickTime works for you. It should based on what I've read online on your camera and knowing the requirement of Premiere Elements for QuickTime.

  Thank you.

  RTA

• Made the audio with the video (preferably parameter) or do it in Encore DVD?

  Should I check the [default] disabled checkbox 'Rendered audio when rendering video' in the general preferences page?

  Even transcode audio faster compared to choose this option in the preferences of PP CS4? What quality? Who suffers? Other factors?

  Thank you, everyone.

  If you are not DD 5.1 SS, and there is no rush to get the more video on the disc, export as a WAV/PCM 48 kHz 16-bit PrPro and then set the Audio in the project in PCM/WAV, and you won't lose anything. PCM/WAV is uncompressed, so the quality result perfectly. AC3 is compressed, so quality goes down, but for me, the DD 5.1 SS, I have no choice.

  Good luck

  Hunt

• Hi all I'm having a difficult time running my v7 with the new 10.11 stand out

  How to make the old pilot to run with dj sarato and uncheck v7

  Hello

  You will not be able to use Apple music with professional audio because of the DRM.

  Jim

• How to test the audio and the video on Android

  How to test audio and video on Android?

  How it is checked when installing Skype on Android?

  What I'm asking, is available in the desktop version to Tools-> Options-> Audio settings, and Tools-> Options-> video settings. And is checked during the installation of Skype for desktop PC as Configure Skype / check your audio and video files.

  (Of course I searched the whole Skype app and found no.) I have the echo service by my microphone is weak, I am lost.)

  Thank you.

  Sign in to your ID on Skype desktop and call your android phone to test

  It's something is broken, there is not that you can do, other than downgrading to an older version. There are also a couple of settings to activate the camera and photo qualityin settings in some versions.

• Photo Story 3 cannot join the audio of the video program, get the error message, even when you try to select the files audio mp3

  Photo Story 3 impossible to join several video (audio) to program songs that has been created, an error message that it cannot accept the format audio, even when you try to select the files mp3 audio.

  Hi BeverlyHeuer,

  I suggest that you convert the music file to convert it into .wav format and check if you can contact.

  Photo Story 3 for Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-XP/help/digitalphotography/photo-story-FAQ

• . I have Windows Vista Home Premium. When I try to play a video file that is attached to my Windows Mail, playing audio but the video is not displayed on the screen.

  Because video (photo) is not shown there is no window to control me, IE; delete, stop. I have to wait until the audio stop. I can even click on another email and the audion continues until it stops on its own. Very frustrating.

  I've recently updated to IE9 and this problem started. I can see the other attachments, photos, etc., but must double-click on the icon of attachment (paperclip) displayed next to the email listed. Attachment icon does not appear with the body of the message. There is also a change from my old e-mail program used before you download IE9. I think I liked much better IE8!

  Hi JeanneChancellor,

  ·         What is the file format of the attachment?

  Method 1: Try saving the file to the computer and check for the issue.

  Method 2: Check if the update of Codecs can help with the issue.

  Codecs: Frequently asked questions

  See also:

  Solve problems with Windows Mail

• Audio of the video will not play on Mobile (unless there are headphones)

  Hi all

  I had a customer bring a problem I've never seen before me. They have a video that will not play audio on all mobile devices unless earphones are connected. Digging around, it seems that the problem comes from the original item, but I still wonder why audio will not play and if there is anything I can do (any codec I use) which will fix the problem. I played around using the options both AAC or MPEG, mono/stereo, played with sampling frequency and bitrate but nothing seems to have no effect on her.

  Any thoughts?

  Thank you!

  Take a look at this:

  Re: Audio problem on smartphone

• Virgin first Pro CC 2015 course any audio with the video (or at least, it does not recognize it)

  Hi all

  In my first PrPro CC 15 launch, one minute 3 imported MP4 shows no audio track, but its audio in PrPro CS6 and AE 15 is fine. What Miss me (next to the audio)?

  Thank you in advance.

  Close Premiere Pro, remove all the media Cache, and the hard disk media Cache files, and then try again.