I'm stressed out, lol

Similar Questions

• Im getting random crashes since a new Barebone pc that I just built! Can someone help me to find out why? Glued is the latest crash codes.

  Problem signature: problem event name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 locale ID: 1033 additional information about the problem: BCCode: 24 BCP1: 001904FB BCP2: 9FE034D4 BCP3: 9FE030B0 BCP4: 82E88C3B OS Version: 6_1_7601 Service Pack: 1_0 product: 256_1 files that help describe the problem: C:\Windows\Minidump\010113-14804-01.dmp C:\Users\James\AppData\Local\Temp\WER-21091-0.sysdata.xm

  Jimmy

  These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

  * Don't forget to download any other DMP files (especially those running auditor)

  * If you are overclocking reset all default before running these tests.
  In other words STOP!   If you don't know what it means that you're probably not

  1 - Memtest.
  * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. http://www.memtest.org
  * Boot from the CD and let it run at least 5 or 6 passes.
  * Don't forget, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
  * Test the sticks individually and if you find a good, test it in all slots.

  Any error is indicative of a memory problem.
  If a well-known stick fails in a slot of motherboard, it's probably the slot.

  
  2. Driver Verifier
  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

  * But sometimes it will crash and will not tell you the driver.
  * At other times it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
  * I would suggest that you first back up your data and make sure that you have access to another computer so you can contact us in case of problems.
  * Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).

  * Under Windows 7, you can do a startup repair disk by clicking Start... All programs... Maintenance... Create a system - with Windows Vista repair disc, you need to use your drive installation or from the "Repair your computer" option at the top of the Safe Mode menu.

  So, here is the procedure:
  -Go to start and type "auditor" (without the quotes) and press enter
  -Select 'Create a custom settings (for code developers)' and click 'Next '.
  -Select "Select individual settings from the list complete" and click "Next".
  -Select the entire document except for "Low resource Simulation" and click "next".
  -Select "Select driver names from a list", then click "next".
  * Select all drivers that are NOT supplied by Microsoft and click on "Next".
  -On the next page, select "Finish".
  * Restart the system and wait as he crashed to blue screen.
  * Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.
  * If you are unable to Windows because it crashes too early, try safe mode.
  * If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  * Further reading
  'http://support.microsoft.com/kb/244617 '.

  Bugcheck A, {b 52, 10, 2, 1, 82cee48e}
  Probably caused by: memory_corruption (nt! MiIdentifyPfn + 1ed)
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  BugCheck D1, {da2de88d, 2, 0, 8c847c37}
  Probably caused by: memory_corruption
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  Error checking 1A, {8885, 84a 26514, 84a10c38, 205}
  Probably caused by: memory_corruption (nt! MiRelinkStandbyPage + 8B)

• Did I lose progress in blocked games?

  I have an iPad 2 Air runs the latest version of the software, not jail broken. It is however controlled admin and some applications have been blocked accidentally like YouTube, Google, clash of Clans, Clash Royal etc.

  I played both of these games for a few months now and I don't know if I will lose all my progress when they are unlocked.

  I looked into the use of storage, and both are still there but much lower in the list, with at least half as well as before. I also looked into the use of the battery for a week and the location n ° 1 is taken up by 'deleted apps and games. All blocked applications icons disappeared, and when I try to open the App store a message pops up saying "this app has been blocked by your administrator of explicit content" even if the confrontation of the Clans is rated 9 +.

  I just need help on whether or not I should start to stress out or not on my progress. Please don't lie to me to make me feel better temporarily.

  If you connected to the Game Center or connection of the game console, it should always be there. Regarding things being blocked, it probably wasn't an accident. Businesses COMPUTER and services don't usually want their devices used for games, and the only way to make sure this doesn't happen to the clock is to block it completely.

• Why don't my used by applications of storage is not the total storage used?

  My iPhone 5 c with the most recent update says I use Go 4.9 out of 5. However, the storage of my apps meet don't add to that. It only concerns me if the gap was not so great. Currently, after you have added the app storage capacity, I use only MB 982,352. Whenever I get to 5GB my phone starts to act up, me locking out apps to keep me from using a storage capacity anymore, when I should have 4 GB.

  Does anyone know what the cause of this problem and how to fix it? It's really starting to stress out me. Any information is helpful and appreciated.

  The iOS itself uses about 3 GB, but you can have deeper problems. Connect your phone to your computer, open iTunes and check that its use downstairs bar. If other and D & D are large you may have a corrupt system and will have to do a restore to solve.

  Other:

  http://osxdaily.com/2013/07/24/remove-other-data-storage-iPhone-iPad/

  http://www.IMore.com/how-find-and-remove-other-files-iPhone-and-iPad

  The system restore. First save your device via iTunes. Also import your photos on your computer and copy all the important data. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

  https://support.Apple.com/en-us/HT201252

• Portege A200 screen goes very dark then works correctly

  Hi, a customer has appealed to a Toshiba A200 protégé (PP415-006002) with lighting LCD problems.

  It happened a few times, first time we thought it was a setting, so we gave him back...
  Second time we disassembled the laptop and found nothing wrong with it, then put it back together, then it worked
  THIRD TIME! : back, ran 3DMARK to stress out the graphics card could not darken.

  Now no matter what I try to do, I can't do the lcd screen to darken, but whenever we give back the laptop to the customer, he always comes back with the same problem
  Can anyone help me that the customer starts to become a little resless.

  Sincere friendships;
  Microsystems Northwest

  If go you into Hibernation mode or suspend, then go back to Windows, the backlight turns back?

  Maybe the inverter needs a cleaning or replacement.

• Battery Tecra M11-130 with not power and the fan runs constantly

  We are having a problem with the battery on one of our laptops. When left for an hour or two the laptop turns off because the battery is dead. We have mounted a battery new but still only get about 1.5 hours.
  In addition, the fan runs continuously. I looked at the PC Healthcheck software which shows as follows:
  * Power *.
  Other costs 14%
  40% of energy consumption system
  Good battery
  * Temperature and fan *.
  CPU temperature 67%
  System internal temperature 56%
  88% fan speed

  I would like suggestions.

  > We have mounted a battery new but still only get about 1.5 hours.

  1.5 hours is a common value, you should consider that dough working time depends on its portable use.

  Battery needed to dump a lot faster if the CPU would be stressed out a lot in your case, that something could run in the background, lose power CPU performance and the dough.

  In addition, you said that the fan runs constantly this could discharge the battery too.
  Therefore, it would be interesting to know what process emphasizes the central unit.

  Start the Task Manager and check the processes tab. In the CPU column, you can find the process that emphasizes the central unit.

  In addition, to change the settings for the CPU performance and cooling of the activities in the options of Win 7 powers that would help to increase the performance of the battery.

• Issue after upgrading processor in HPE Phoenix h9 - 1120-t.

  Hi all.  I had debated on the amendment on the processor (an i7 3770) in my Phoenix HPE h9 - 1120t after that I got my hands on an i7 and 3770 k, still in the box.  Following an injury, I've been away from work for a few weeks - so my pure boredom I went ahead and change on the proc.

  It's relatively simple and no different from any other treatment that I have changed/added other space restricted in the case of Phoenix.  And once I had the liquid cooler and fan/radiator turned off, it's easy as a pie.

  I had no problems at all and it booted right up at the first attempt.  Yes I know it's a tiny increase in frequency, and my just Pegatron Z75 Board is not really made for serious overclocking (I got it at 4.1 GHz for about four hours using the Intel Extreme Tuning Utility and time has hovered around 45 c, which is fine, but I don't want to stress out you my mobo so I supported down to default speeds again).  I don't really plan to do much OC'ing, but it is still nice to have an unlocked CPU.

  Interestingly, there was a fairly large amount of TIM on the CPU and the waterblock when I removed it.  I was always in the pea or the size of BB camp, and I'm curious to see what users here think.  I cleaned the plate cooper real good with some 91% isopropyl alcohol and then put my pea size place on the central area of the CPU die (I used Artic MX-4), which allows the waterblock to spread it when mounted.  My time seem to be really on the same property.  I slowed down around 28 - 30 c, which is what they were on the no k.  I wonder if there have been good studies on thermal paste, and if someone proved the entire surface of the CPU that is painted on the method or the method of pea size dab is preferable.

  I have a question though.  Warranty associated.  Since I still have a year left on my warranty, what happens if something happens and I need to send the whole rig under repair at HP?  Do I have to restore the original components and put the former no k 3770 back in?  The reason why I asked is that I have a chance to sell the old da, but I was worried that I might need if something bad happens and I'm in need of repair or service.

  

  With regard to thermal paste... too much is as bad as not enough. In all there should be a very thin layer of compound... just enough to fill in the blanks between the contact surfaces.

  Like many, the guarantee will return all components of the stock to the computer and the backup... or make image to your hard drives. I have a graphics card improved HP because the specifications were inaccurate and I relied on them for the purchase of the computer. Customer support escalations manager told me to keep the original of the card corresponding to the correct plug where the system had to go home. I guess it's because the technician can replace components with parts... If technology don't, perhaps you miss an Intel i7 3770 k. There are also many discussions of the forum on component being change and hard drives being wiped.

  Please send Bravo

• Not mountable boot volume

  Hi all

  I have this problem since Friday, when my laptop crashed. Says "Unmountable_boot_volume" blue screen of death and refuses to boot windows in any form (safe mode and otherwise). I was stressed out since all my data was on it. However I managed to use a bootable linux cdrom program named knoppix for access and backup my files. When I used the recovery cd, the recovery process stops with an error.

  I checked the net, where people have solved this problem by using a windows xp cd. After following their advice and using chkdsk/r, the process stops and the chkdsk program tells me there are one or more errors that prevent him to fix it. checking further... people have used the fixboot or fixmbr to repair their starting system, this does not work. The program he says even that my hard drive is broken. Oddly enough, my hard drive is still accessible with the cd of linux?

  Then I tried to format it. with format c:... seemed to work ok... no errors and other things. However if I go to the root and the type of the dir command, the compu tells me that there is something wrong with my system files. What is even more strange: AFTER formatting of my readers, readers and their information is still intact with the LINUX cd and fully accessible? !!! Anyone know what to do... im desperate >?

  Thank you

  Benoit

  Post edited by: bwitkamp

  Hello
  Use partition magic or similar software to clean the hard disk, you have very probably a Linux partition on the hard disk that prevents return to work. therefore give you the ok. Back and flop in recovery.

  BTW, you might have used microsofts own downloadable windows XP startup disk in their download section to run again and correct the above error.
  concerning

  Gandalfwhite

• HP Pavilion dm4: graphics driver Intel & AMD causing Windows Crash

  Hello.

  My laptop is

  HP Pavilion dm4-3107tx Beats Edition Entertainment Notebook PC.   I tried to install the graphics drivers from this link:

  http://support.HP.com/ph-en/drivers/selfservice/HP-Pavilion-DM4-3100-beats-Edition-entertainment-not...

  but I could not install the graphics card intel. It is said that the cell does not meet the minimum requirements of the graphics driver.

  I also tried to install AMD and he did. But every time that I reboot, Windows startup crashes.

  I also noticed that results for starting blocked when I recently updated my Windows, including the update for the driver intel which I have not yet installed (because I know that once I did, I do a lot of recovery and repair of the system for the umpteenth time).

  And now I feel really stressed out about it because I've been formatted my laptop for the second time, and the last time it was with the release of the pilot intel. I was stuck again started back and I got really tired of him.

  I really need help with that.

  What I have to install ALL the drivers in the link before installing graphics drivers to ensure that graphics drivers will install?

  Hi @katrinahahaha,

  Thank you for your query.

  I understand that you have a problem installing your graphics drivers.  After formatting the drive and installation of the Intel graphics driver, you have a problem starting.  Did you use the Recovery Manager to format and reinstall Windows 7?

  You only need to install the driver AMD of the HP driver page because it contains the two pilots.  Please try this process:

  • Uninstall and remove two graphic drivers
  • Restart your laptop
  • Run the HP Support Assistant to help find and install the graphics drivers
  • You can also after the uninstall, remove the driver and restart, download and install just the driver AMD.

  HP Support Assistant

  If this problem persists, try removing both drivers and using the Recovery Manager to install the drivers:

  Computers HP - using Recovery Manager to restore the software and drivers (Windows 7)

  Please let me know the results.

  Thank you! If it helps you to find a solution, please click the button "accept as Solution"down below in this message. "If you want to say 'Thank you' to my effort to help, click on the" ""Twww.Mountainview.rsb.qc.ca Up ' give me a Kudos.

• forget the password and apple ID

  I update my iPhone 5 IOS 9.3 and to activate my iPhone I forget apple id and password

  I recently updated my ipad IOS 9.3 and his arrival at the top on the white screen where you type your Apple ID and password.

  I completely forgot the apple ID, I used to set up the Ipad. He let me use other accounts to connect, I also tried hard resetting but it always happened to the same screen.

  It is said ' IPAD is currently linked to a apple ID, sign in with the ID used to implement this IPAD ', please help someone like her my little sisters IPAD and shes stressed out!

• HP Officejet 4630: Margins in Microsoft Publisher printer problem - 4630

  Just bought a new printer (see above).  I use Microsoft Publisher a lot and have had no problem with fixing the previous HP printer margins.   It does not work with this printer.    I put a.5 pour.55 for low high margins and left and right margins.  Worked fine in another printer.  Also, the images will not print completely.

  A decided to test the image on the page white and copied from the original page, and then glued on the blank page and pasted it in the exact area on the page, but when I printed, the image printed at the top of the page.  Crazy.  In addition, the picture is not all there.  For some reason, she is enlarged but part of it is missing.

  I test this in Microsoft Word, same thing with the size of the image, but he did copy and paste correctly.

  I just bought this printer and really upset.  I'm wasting so much paper to document student.

  I thank in advance and hope you have an answer.

  I answer to my previous post.  Even if I couldn't find the part where I set margins to reduce to a minimum, which apparently isn't serious.  I was able to keep my 0.5 for the left, top and right and 0.55 for the bottom.

  The problem was with the images, so I tried different ways to bring in the images.  I had to remove the images in the document of the registered editor, then started using the "Snipping Tool" in Windows 7.  What I've been able to do with the previous printers, is just COPY what I have snipped and paste it into the editor.  That didn't work, so then I tried to save a .jpg file.  Still had a bit of trouble, so saved as .png.   Well, now I can add my text to the images and it keeps the sizes.

  I think I'll try the .jpg stresses out me again I was really with all printing and paper waste, so I might have missed that .jpg would actually work.  Doesn't make sense that he would not, but it is not supposed that I can't paste the copy of the Snipping Tool, either.

  Boy, you wish that the print heads had not come out on my previous HP printer.  It was great.

  Thanks for trying to help me.

  Now, I don't know how to set this as resolved because I do not see this option here. then let me know, please, how to do this.

• Equium 1000-337 is not responding error

  Since the day 1 with ordinary "not responding" errors, I have suffered with this machine, which means generally that the PC freezes and must be turned off.
  It seems any program or event, will trigger even try to open something weeds such as Notepad.
  Vista Home Premium, 1024 MB of RAM.
  If someone else found this? I almost smashed the thing to pieces this morning so now I'm looking for a more moderate approach.

  Any help/suggestions appreciated.

  Hello

  "Usually the not responding" errors happens because of the CPU busy and stressed out.
  I put t know how many applications and programs run on your operating system at the same time, but if the CPU is busy it can happen that the running program must wait and that is why he does not answer.

  I see that you have installed Vista on this computer. "He should know that this OS needs resources much more like a MS OS at the beginning and I really don t wonder that such does not ' errors appears on the laptop with only 1 024 MB of memory.

  In my opinion you shouldn't t run multiple applications simultaneously and if possible try to improve memory if you want to run Vista smoothly.

  Concerning

• Equium L40-156: Vista IE 7 WMP 11 - can't watch streaming videos

  I have an Equium L40-156, running Vista Home Premium, WMP 11, IE 7.
  I can't watch streaming video!

  I can on my computer which is running XP and IE7.
  I searched the forum after forum, and I'm still not close to solve this problem.

  Please please can someone help me...
  I'm pulling my hair out lol

  Thank you

  What to say that you need a plug-in. You may need to install an Adobe flash player?

  Check it!

• Satellite C660 - WLan disconnects when on battery

  Hello

  Please forgive my ignorance on this, but I'm just trying to establish whether the problem is with the laptop.
  I recently bought by Satellite C660. I loaded the internet as I have done with so many other pc, and if the charger is connected (even if does not load) I can connect to the internet and keep in touch without any problem.

  As soon as I remove the CAP, because obviously, I don't want to keep plugged in when the battery is full - I lose the internet connection - comes with limited access and that's it, impossible to surf.
  It can be something completely stupid that I have or have not is but I really would like help any with this question that it's starting to stress out me.

  I also tried other internet devices that seem perfectly ok and my signal is excellent.

  Please help, thanks in advance

  Hi mate

  Please take a look here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59177

  You can solve this change of economy option WLan Card in Win 7 the power supply management.

• Drive DVD - RW does not properly on the Satellite A40-702

  It's on my lap top of Toshiba Satellite SA-40-702. Five years ago.
  Hi, I have looked at the wires for this problem and have not been able to identify a similar thread yet.

  My dvd - rw play a purchased audio music cd and it will also work with disks that came with the laptop. S something works well... However, recently I tried to burn a piece of music (from i-tunes) and he showed in white, but strangeley the cd did play the piece of music OK in a machine at work. I tried now to show some other discs that I recorded on this laptop in January, and they now show that the discs and I cannot see their content (they were photos and text documents). They worked before.

  I have this weekend made many attempts of 30 photos of burn, and I tried two different brands of dvd discs blank, but even if the laptop says 'burning to disc' etc when I try to view the burned disc, there is nothing on it!

  I wonder if anyone has any suggestions please. I tried to clean the blue eye with a brush hairs inside the drawer of the dvd, that's why I expect that the next step may be just to buy a few more recent records?

  G

  Hello

  My personal opinion is; the reader cannot process the community burned due to the stressed out laser lens. It turns out that your laptop and the drive is older than 5 years.
  I put t know how the drive has been used in recent years, but due to the long period of possible use of s that the lens cannot read data from the CD/DVD now.

  This is not unusual. My brother s book can not read the CD/DVD that were burned a year ago, I presume that it of the same reason the s drive laser lens problem

  Hmm you don t have many possibilities, you can try to burn these discs with another computer/laptop and then could check if you red the data.
  The last option would replace the drive