I'm trying to cnnect my printer kodak wireless workstation

Similar Questions

• Trying to install my printer Kodak after new XP installed. Error message {procedure entry point could not be found in the library of links Dynamics cscomp dll}

  I had a Trojan horse and had to do a reinstall of windows XP Pro is now trying to install my printer but I get the error message saying "entry point procedure GetMessage DLL is not found in the cscom dynamiclink library dll. Help, please!

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/308028

  It will be useful.

• trying to install a new printer kodak esp 3.2, error 643

  Original title: error 643.

  trying to install a new printer kodak esp 3.2

  Troubleshoot network printer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  You can place the computer in a clean boot and installation of the printer driver.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important:-do not forget to put the computer to a normal startup by following step 7 in the link above.

  You can also read the following article to download Kodak printer drivers.

  Kodak printer drivers

• Error 0 x 00000643 error when you try to install a Kodak wireless printer. When tried to install the wireless printer is located and ready to install, I get a PnPx device then error

  Error 0 x 00000643 error when you try to install a Kodak wireless printer. When tried to install the wireless printer, wireless printer is ready to install I get a PnPx device Microsoft authorization. Runs like it is installing then error is presented. I tried fixit did not work... Frustrated

  You could settle on a previous installation. Try this:

  Go to your device manager and see if you have an old installation of the printer and right click Uninstall. You can also check if there is an old facility of the printer in Control Panel, printers, right click and delete it. Install the printer using the Add Printer Wizard. If it fails again with the same error, go to Device Manager right click on the name of your computer, click on "Scan for harware changes". He must find the printer and install it. Now you can check your printer if its work. If this does not work, please indicate your model of printer on your next reply.

  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

• I am trying to install a printer wifi (Kodak ESP 7250) and they are both connected to the same wifi but when I try to add the printer, my PC can't find it.

  I am trying to install a printer wifi (Kodak ESP 7250) and they are both connected to the same wifi but when I try to add the printer, my PC can't find it. I made sure they are both connected to my home network and when I go to control panel / printer and try to add a network printer / wireless. He won't find it. Any ideas?

  Hello

  I suggest you to visit these links and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  It will be useful.

• How do U get rid of an element of U, sent to a printer dell 305? I tried to cancell the print job because apparently, he hung up and will not print, but I can't get out of the what.

  I sent a document of 3 MB 3 pages for the dell v305 printer. It seems to hang and would not print. I tried to cancel all print jobs, but he finds just there.any ideas on how to get rid of this work and leave the impression that if I can get other printed documents?

  Has a moderator move this thread on forum Windows for the hardware and the drivers of the feedback forum.

  Hi, dadzippytr,

  Click Start and type services.msc

  Press enter

  Scroll down to print spooler

  Right-click on the spooler and select stop

  Wait for Windows to stop the spooler

  Close the window

  Control Panel > printers folder

  Right-click on the printer icon and select open

  Click file > cancel all Documents

  Close the window

  Start > right click on computer

  Click on manage

  Select Device Manager

  Click on the + sign next to the Ieee... compatible printers

  Right-click on the driver and select uninstall

  Click on the + next to imaging devices

  Right-click on the driver and select uninstall

  Click on the + sign next to printers

  Right-click on the driver and select uninstall

  Click on the + sign next to Bus USB controllers

  Right-click on the printer driver and select uninstall

  Close the Device Manager

  Restart the computer

  Windows will reinstall the drivers

  Go to the manufacturer's website and search for updated drivers

  Don't forget to come back to services and start print spooler before printing again.

• Help! Unable to install printer Kodak ESP 6150 on XP 64 - bit processor.

  Unable to install printer Kodak ESP 6150 on XP 64 - bit processor.  My husband did not check the requirements before you buy the printer!  Does anyone know if there is a driver who will do the trick?  Thanks in advance!

  Hello

  I'm afraid that the KODAK ESP Office 6150 printer software is not compatible with the operating system of Windows XP 64-bit; However I suggest you to get in touch with the OEM manufacturer for alternative solutions to install the drivers.

• trying to share a printer, so I can access it from another computer on my network, it seems to cross but the shared icon does not appear

  Original title: sharing printer problems!

  I am trying to share a printer, so I can access it from another computer on my network, it sems to cross, but the shared icon does not appear? Why is this?

  I'm on windows xp professional

  Hi Pazza1995,
   
   
  Follow the steps listed in the articles below and check if it helps to fix the problem:
   
  Troubleshooting File and Printer Sharing in Microsoft Windows XP
   
  How to use Windows XP to share a printer with other people on your network 

• Error: "error 1920 Print Spooler Service (spooler) could start" when trying to install the printer

  Original title: print spooler could not be started

  Trying to install a printer. Get "error 1920 Service print spooler (spooler) could start. Can you please help?

  Hi phil195golf,

  1. What is the brand and model of printer?

  Try these steps and check if the problem persists.
  Step 1: Run Microsoft Fix to diagnose the problem
  a. see you can not add a printer and you receive spooler printer in Windows XP error messages
  b. click Microsoft hotfix and run the tool successfully.
  c. restart the computer.
  d. install the printer and check if the problem persists.

  Step 2: If the problem persists, install the printer by turning off all non-Microsoft programs
  see How to configure Windows XP to start in a "clean boot" State .
  b. follow steps 1 and 2.
  c. installing the printer and check the result.

  Note: Article, remember to follow 'steps to configure Windows to use a Normal startup state. "

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm trying to get my printer to make color

  I'm trying to get my printer to make color, it does not seem to matter what I cannot have to print in color. I had problems with the printer and may have changed the settings and I have no idea how to solve this problem. I went to the printer settings and went to the properties of the printer to color management, then I get lost. When I put my printer in (and I don't see why it's different) nothing changes. nothing I try makes no difference.

  Hello

  If you have changed the settings of the printer, on the whole, we can suggest is to uninstall, and then reinstall the printer that would about how it has been initially set up.

  People who can help you with the settings of the printer are the manufacturer of the printer, not Microsoft.

  Contact the manufacturer of the printer for assistance or try the Support Forums.

  See you soon.

• I have windows vista and an HP officejet pro 8500 has everything in a printer etc.. NOW WHAT Ive tried all except she and wiring wireless sound.

  Any ideas why it stops, everything seems to be committed to the right. I can get it to do print and fax, but no analysis. Says can not finmd printer.

  Have you tried to update the printer drivers? All new hardware comes with the cd or instructions to connect to the internet and update under the name of its news for you, it may have been on the shelf for 6 months +. Also check the devices Printers device manager and update there.good luck

• My scanner/printer Kodak 5250 well combo worked for two weeks & stopped scanning & printing & indicates does not not with Windows 7 computer

  My combo scanner/printer Kodak 5250 has worked for about two weeks and recently stopped working & indicates some Windows 7 computer communication problems.

  You can manually copy an image or a document however will this computer.
  Thank you;   Joe Bowen
  E-mail address is removed from the privacy *.

  Hello

  Make sure that you use the latest drivers for windows 7 from Kodak for her

• trying to regester my printer how to enter postal Code when it askes for a postal Code

  I tried to regester my printer and despite my location in the United Kingdom the askes online form for a Code postal in the United Kingdom we use postal Code so I can't regester my printer. How can I regester it.

  I would try this link here. This is one is an HP product registration site and after you enter the product code then next page that appears asks you basic user information and the address on this site field is labeled 'postal code '. I hope this helps.

• I'm trying to use a printer that connects via USB and he always tells me that it is not a driver?

  Hello

  I'm trying to use a printer that connects via USB and he always tells me that it is not a driver? I don't understand what is happening and I think it's a setting that I have on my computer. Can anyone help? Ive went on the website of the printer to download the driver and the im unable too.

  Hello

  OEM for the printer manufacturer is responsible for the proper functioning of the printer
  and their drivers. Check with the manufacturer of the printer support, their online
  documentation and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  ================================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Solve printer problems (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Open the printer (Windows 7) Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• After trying to install word printer epsom has not stopped workung - uninstalled but stll not working not

  After trying to install a printer, Epsom SX130, on Windows 7, WORD has stopped working - have tried uninstall & restore but still cannot use WORD. After paying only £ 65.00 to restore the office, I'm very unhappy. It is the only document that we need to print, others may be sent by e-mail, but now I can't even open Word documents to use as attachments to an email. I'm totally desperate, do we buy a 'small' I wonder. More than 60 years, when I started it, maybe I was just too old or it's Windows 7 just make my / our life uncomfortable for us to update: Please keep in mind, I'm very, very, ridiculous with computers. We have done with a drive by the way if that makes a difference & downloaded an update. If the answer is "not compatible" that's fine, I can make documents on the old computer, BUT need words for emails: i.e. repeat orders etc. which are vital to our system of new physicians.

  Am totally fed up now...

  Hello

  1. what version of Microsoft Office are you using?

  2. you receive an error message when you start Microsoft Office Word?

  You can perform the system restore the computer to the date when the changes were made not (before the date where Microsoft Office was working fine).

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

   

  NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  For further assistance on the question, you can post your query in Microsoft Office community:

  Microsoft Office community

  http://answers.Microsoft.com/en-us/Office/Forum/Office_2007

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.