My scanner/printer Kodak 5250 well combo worked for two weeks & stopped scanning & printing & indicates does not not with Windows 7 computer

Similar Questions

• Xmarks is functional? It didn't work for a week and the installation wizard does not work.

  The last time worked Xmarks was on 25 October. I am connected correctly and it tries to synchronize, but never finished. Even the Xmarks Setup Wizard does not work. It is a very useful addon in the past one I hope he'll return to work.

  I had this problem too. I'm running Firefox 25.0 and used Xmarks 4.2.1. Sync would not end. I downloaded Xmarks 4.2.3 from Xmarks web site (not the site of Mozilla Add-ons that apparently has 4.2.1) and now everything looks OK.

  Mark

• Recently, I went to the Apple Store in Easton, because I broke my screen. After that I got my fixed screen it worked for a little while but now it does not meet my contact

  Recently, I went to the Apple Store in Easton, because I broke my screen. After I got my fixed screen, it worked for a little while but now it does not meet my contact, Apple is responsible for this and how do I get my screen works again?

  Take it back to the Apple Store. Repairs made by Apple retail stores are still covered by the warranty.

• HP Officejet 6500 a E710n-z: HP 6500 printer scanner prints but does not scan

  Since my OS has been upgraded to Windows 8.1 the printer scanner prints (very slowly) but does not scan!

  I tried HP Print and Scan doctor, he worked once (clumsily) but not since. I tried Windows ' whatener it is called "but nothing.  It was working perfectly since I the printer scanner.   Now I don't NOTHING DO let's me scan.  and the fix message tells me that my WPA security password is not quite valid (nothing has changed here!)

  I checked the internet, it seems that a lot of people have the same problem.  I don't know if anyone has fixed it.  The so-called solutions are not very easy to follow!  Just as they do not work.

  Thank you X-23, I'll ty that when I have a little more time.

  Dziadz

• Epson printer driver does not appear in the printer & Scanner window

  I downloaded the latest driver for my Epson Artisan 50 printer OS 10.11.5. I ran the installer, and it seems that the installation was successful. But when I am preferences system-> printers and Scanners and click the + to add the new printer, it does not appear in the list 'Add '. How ca I add the driver to my preferences printers and Scanners?

  Mark Romine wrote:

  How ca I add the driver to my preferences printers and Scanners?

  You do not add a printer driver for printers and Scanners.  You add the printer itself.

  The Epson Artisan 50 is not a printer capable of AirPrint, as shown here:

  On AirPrint - Apple Support

  (I have an Epson taking is an AirPrint printer, and it works very well with OS X 10.11.5.)

  The Artisan 50 printer seems (but not scanner) software in the Apple driver:

  Printer and scanner software available for download for your Mac - Apple Support

  Therefore, follow the instructions here:

  OS X El Capitan: Add or remove a printer

• Add-on for Print Edit does not work

  I just got my iMac cleaned for adware and now my add-on for print edit does not work. There is an error 2 - XPF to the catalog. I don't know the email address of support for developers?

  Hello

  Did you mean this extension:

  • https://addons.Mozilla.org/en-us/Firefox/addon/print-edit/

  The contact details are on the right side of the page, next to the section 'on this add-on.

• 29,0 Firefox, print 'selection' does not work.

  When I select a section of a page, then use the "print" button, the 'selection' print option does not work. It is not highlighted in the print menu.

  The button "print" 'action' in Firefox 29 differs from earlier versions. Now, he opens preview print rather than going directly to the box of "native print dialog. That breaks the ability to print a 'selection '.

  My advice is to highlight the selection , then use {Ctrl + P} to start printing until Mozilla fixes the action of the "print" button in a newer version of Firefox.

• Photosmart 7520: Printer Wizard does not work on Windows 10

  My PC has recently upgraded Windows 10.  I am now having a problem with the Printer Wizard.

  Previously, I had the status display, the ink levels, scan document, check printer heads, etc.

  Now all I get is a printer configuration screen that has 3 options

  -connect a new printer,

  -convert a USB printer wireless, and

  -Add new software.

  How can I get the correct printer assistant screen to run?

  Thank you.

  Hi @AJA3,

  Thanks for joining the Forums of HP Support for a solution to your problem of HP printer Assistant.

  I understand that you use a HP Photosmart 7520 e-all-in-one printer with a computer who has recently upgraded Windows 10 and now, when you click on the printer icon to open the HP printer Assistant you get the "connect a new printer"window. " I would like to help with that.

  It is not that the HP printer Assistant does not work, but probably the printer probable network needs to be reinstalled.

  I would like to start by uninstalling all software that was installed before the upgrade to Windows 10 relating to printers. Here is a support document which can help needed - uninstalling the software of the printer (Windows).

  If you get prompted to restart the computer when uninstalling, go ahead and do the restart. If this isn't the case, restart the computer after the uninstall is complete.

  Once the computer is ready, try to use the HP printer installation wizard for installation. This tool will find the most recent version of the printer software and installation help.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Printer spooler does not work for a single user on the network printer

  original title: very different printer problem

  I have a HP deskjet printer shared from a PC on the network.
  I was informed of a single person could not access error poped by saying "printer spooler does not work.
  I went to the services and made sure it was infact running and rebooted to be sure also restarted the RPC services as it is addictive
  Still, the user cannot print to the printer. I took the computer that has been seen issues and hung where fixed my PC and I am able to connect and print!

  If I move my computer witch would allow me to print before there where his computer is my computer prompt same error

  My idea is - what some are how a network issue, but the user can still access drives network, internet and other printers on the network

  Just not this printer

  The computer on the share is is a windows xp sp2 workstation

  The computer with the issue is any system I plug its cable Ethernet (XP anyway) I have not tried with a windows machine 7.

  My hypothesis is a bad Ethernet cable? I'm quite lost with this question at this stage.

  My next step is to hang the printer until a print area and assign an IP address and finish with the share.

  (Still not sure if it would help or not)

  Any advice is welcome thanks

  It turned out to be a bad switch. I don't understand why it did not work. All the computers had no problems other than the present even that if I swapped the ports it has made a difference.

  Hung new switch and all computers works fine now.

• wired keyboard 600 print screen does not work

  System

  Windows XP Professional 32-bit version 2002 Service Pack 3

  Dell Vostro 400

  Intel Core 2 Duo E4500 2.19 Ghz, 3.00 GB Ram

  Since I replaced the original keyboard with Microsoft wired keyboard 600 print screen functions are sporadic at best.  Sometimes Ctrl + PRTSCN works and especially it's not.  Even when Ctrl + print screen does not work I can not copy the active window by using Alt + PRTSCN.   I have a Setup dual monitor at work so that I can have the database, file explorere and opened in a window screen and development in another email.  I tried to download the driver from the Microsoft Web site, but he says that drivers that are installed are later.  (installed on the disc that came with the keyboard)

  Other than to start Microsoft keyboard anyone elese have all the solutions to make it work?

  Hello

  Follow these methods.

  Method 1: Follow these steps to run the keyboard Diagnostics

  (a) start Microsoft Keyboard Diagnostics. To do this,
  Click Start, click run, type mskey in the Open box, and then click OK.

  (b) press several keys to verify that the keys match the keys identified in the MS Key window.

  (c) when you are finished, click exit.

  If you get no response in MS Key on your keyboard, test the keyboard on another computer

  Method 2: You can also use the on-screen keyboard and check if you are able to take screenshot.
  For more information, see this link.
  http://Windows.Microsoft.com/en-us/Windows-XP/Help/on-screen-keyboard    

  If the methods above do not help, you can contact the Microsoft Hardware support.
  How to contact Microsoft if you have questions about your hardware device
  http://www.Microsoft.com/hardware/en-us/support/contact-us

• My canon iP4300 not work on64 bit XP said ' print spooler does not.

  I recently changed my computer until I ran a system of 32-bit xp and now Iam updated to xp 64 bit system and my previously fine printer will not work. The message arrives:-"print spooler does not" ideas?

  Hello

  Step 1: I suggest you to download and install the driver appropriate from the following link:

  http://software.Canon-Europe.com/products/0010386.asp

  Step 2: Try the procedure described in the following article:

  "You can not print and you receive the error message"Spooler subsystem app has encountered a problem and needs to close"": http://support.microsoft.com/kb/810894

• Printer Hp5510 crashed. Software removal - tried reinstalling. Cannot install printer Message "print spooler does not work - what's up."

  Hi all

  Need help

  Hp5510 locked

  I works fine when connected to my laptop - but-not when it is connected to Compaq Presario desktop mu

  Software removal - tried reinstalling. Failed to install.  printer Message "print spooler does not work - what's up."

  ↑ hanks

  Scott

  Consult HP printer experts found in the HP printer Forum.

• my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  He ran once before, one of my suggestions of solution was the coil (?)  was incorrectly, but don't know how to adjust it

  Hello
  (1) have you made changes before the start of this issue?
  (2) what is the exact error message/code?
  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

  To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  a. click the Start button, Control Panel, click System and Maintenance and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Additional reference:
  Open printer troubleshooter.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Let us know if that helps.

• I can't print. It says local print spooler does not work, restart the printer or machine.

  I use windows7, I can't print. It says local print spooler does not work, restart the printer or machine. I can not install, or add the printer currently installed in my computer. Help, please.

  Original title: printer

  Hello

  The print spooler is the mechanism that will interface between your application and the printer and coils (sends) the print job to the printer. It should start automatically when you start your machine. So, restart your computer and try again. I suspect that the real problem is to find why the print spooler has stopped in the first place.

  After trying again, see what happens and if your print spooler stops again, the real work will begin.

  Kind regards

  BearPup

• driver problem sharing printer attached to the XP with Windows 7 pc client

  Before submitting my question, I look into responses to something that would be useful. There were some similar issues, but neither the same as mine.

  I have a desktop pc XP/SP3 with a Canon IP4600 USB printer.

  So far, I got a home network wired (through an ethernet switch) with another XP desktop PC 2, which the shared printer successfully.

  Now, I replaced the ethernet switch with a wireless router that I have to also connect at least 1 laptop to network without cables more.

  The laptop is running Windows 7 Home Premium 64 bit.

  I successfully setup the network wireless router/Win7 so machine Win7 has access to the Web. I can also see the shared folders on the XP Win7 pc and can also see the IP4600 printer.

  When I try to add the printer so that I can print in Win7, it fails because it has no driver. I do not have a Win7 driver for this printer on each machine, so I downloaded it from the Canon Website on the Win7 pc. This is a huge 55MB EXE file zipped (must be a bunch of other 'apps' there, too, may not only be a pilot). The "Add printer" procedure looking for one. File INF so he does not see this file downloaded to extract the driver. When I run the EXE file, it starts a procedure facility, which quickly fails and leaves because he "cannot find the printer" (because it is physically on the XP pc...).

  Please help me get a Win7 driver installed. I need to print from the Win7 pc quite urgent...

  Thanks in advance.

  Canon is making things difficult for you.  Hidden in the small print that describing 55MO download is as follows.

  This software is a module that extends the functionality of the printer driver for Canon inkjet printers. Your printer must be installed through Microsoft Update before you download and use this module.

  In other words, downloading isn't actually the driver.  It is an update of the driver.

  I don't have my Win 7 computer pulled upward at the moment, but when you get to the part of the Add Printer Wizard when you specify the brand and model of the printer to select a driver, make sure you check the box at the bottom of the list to allow the search on Windows Update Wizard.  Well with XP, it was a bad idea to get drivers through Windows Update, it seems that many drivers, including printer drivers, do not appear on the install of Win 7 media but is available through Windows Update.

  Another part of the process that I vaguely remember last time I installed a shared printer on a Win 7 box, is that if you select "add a network, wireless or Bluetooth printer" the wizard cannot find the shared printer.  In this case, use the "Local printer" option and specify its address in the form \\computername\sharename (if there are spaces in the name, use double quotes around it).

  ******************************************
  This is what I was referring in the last paragraph:

  5. install printers on a local network
  If the printer is on a network, you may need to indicate to the Add Printer Wizard that you install a local printer, use LPT 1 as it is connected to the port and then change the port setting when the driver is installed. To change the port, go to the dialog box printers and devices, right click on the name of the printer, and then choose Properties from the printer (not to be confused with the properties). Select the Ports tab and the Add Port button. In most cases, you'll want to select Standard TCP/IP Port, click New Port, and then work your way through the rest of the screen of the wizard, enter the IP address of the printer in the corresponding dialog box.