I'm trying to understand why there is no sound to my pc

Similar Questions

• Why there is no sound on the 'original media'?

  Try to understand this mystery: when inside the CAF, if I move the cursor on a clip, it plays properly.  But if I right click and "reveal in Finder" then try playing this clip (same), in Quick time, he plays without sound!... What's wrong?

  Not too practical, because I want to use these same clips in other programs (not only FCP...)

  Is it a setting I could have put somewhere? Just can not know...

  Thank you

  Rob

  Please give the complete media specifications as it appears in the QuickTime inspector window.

• Can't understand why audio files always take a lot of space on my macbook

  Hi everyone, I apologize if this has been asked before, I'm going cross-eyed trying to find an answer.

  Stupidly, I didn't use iCloud DOES NOT mean that all my music and photos would be stored on the cloud and take MUCH space on my macbook. I discovered the hard way. So I'm moving all my pictures and music on an external drive. All well and dandy. Except that since I moved my iTunes library and all my music files, when I look at my storage, it shows still 154 GB allocated to audio. (Meanwhile there are now 140 GB Audio on my seagate SOMETHING that was supposed to happen happened.) I've looked everywhere, I can't understand why there are still some 154 GB of audio files on my laptop. Any suggestions or tips are greatly appreciated. Please be lenient, I was on a pc for a few decades and finally crossed the step last year, but I'm still confused by all this cloud stuff and find my way in on a mac. (I'm on OS X Yosemite). I guess it's one thing to iTunes, but I could be far away.

  Thank you in advance.

  I guess that after you copied the folder iTunes external hard disk, you checked if everything is there, then deleted the folder iTunes on your Mac drive.

  If NOT, then you know what to do.

  If so, force Spotlight to reindex the reader.

  Rebuild the index on your Mac - Apple Support Spotlight

  ---------

  iTunes: link again or external HD library:

  * Open iTunes while holding down Option (Mac) or shift (Windows).

  * In the dialog box, click Choose library.

  * Select the iTunes folder that you moved to the external hard drive.

  * Click on choose (Mac OS X) or open (Windows), and then choose the library inside iTunes file.

• There is no sound in my PC

  Original title: my sound

  the sound on my pc was working fine. \i d dump it on yesterday and theres no noise at all. What should I do first?

  Hi Liz Russell,

  Thanks for posting your question in the Microsoft Community.

  I understand that there is no sound in your computer. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer?

  2. you receive an error code or message?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the steps described in the links below and check the issue:

   

  Adjust the sound volume:

  http://Windows.Microsoft.com/en-us/Windows-XP/help/adjust-sound-volume

   

   

   

  No sound in Windows:

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• I don't understand why suddenly software won't let me export the movie My she tells me, on all projects, there is an unknown problem and won't let me export

  I don't understand why suddenly software won't let me export the movie.

  She tells me, on all projects, there is an unknown problem and won't let me export

  This is now happening to me also. I've been editing happily nonstop for two months without this problem. The same project even made without problem a few days ago. Then update WME was released - he says something about fixing bugs? Now the first fails to encode using the encoder, Cuda mercury as in the photo of the op. No other changes to the system. Sometimes the first blocks also. Also noticed before makes oblivion on reload.

  Have tried - new driver nvidia, new projects, new sequences, removal of caches, different drives, uninstall and reinstall WME and first, reset the preferences.

  Very easy 9 min chronology of rendering fine just 4 days ago. Only lumetri, masks, stabilizing warp, moment 4 k - S.redgiant

  780GTX 32GB PC with several SSD and 7200 drives, i7 6 GB, Win 8.1 64

  --

  Update: has been working through some things with care. Really useful. Looks like it's specific project. Can be exported in single CPU mode. Put up-to-date I've run some additional tests. Older project exports ok.

  --

  Update: as I am with nvidia I downloaded the driver, custom installation selected, checked the box for a clean install. (according to the Adobe support chat)

  Do not click on the "maximum make quality" for the resizing option.

  Currently works for export in 1080. Will try 4 k later but at this point, it seems that the clean install video card driver that he fixed. It's all about a k 4 timeline.

  --

  Update: the custom clean install of nvidia driver finally solved the problem. Now, I can export the same project with all settings and sizes. A big thank you to the customer supports the person (MS) to tide me over.

• Is there a manual of Thunderbird? I'm trying to understand all the options to display/Threads.

  I'm learning to Thunderbird, hoping to adopt as my e-mail client (cannot float Eudora more). The forums are not effective for learning. Right now I'm trying to understand all the options to display/Threads, but tomorrow it will be something else.

  Hi Tom,

  There are some resources that I found for you to learn Thunderbird as you go.

  • http://en.flossmanuals.NET/Thunderbird/
  • https://cs.uwaterloo.ca/CSCF/HOWTO/Thunderbird/

• I had my hard drive crash and am trying to understand how I can install Acrobat 10 on my new computer. I have the old serial number, but have misplaced the installation disc. Is there a way to do this?

  I had my hard drive crash and am trying to understand how I can install Acrobat 10 on my new computer. I have the old serial number (because I registered it with Adobe) but have lost the installation disc. Is there a way to do this?

  You can get the installer from here: download Pro or Standard versions of Acrobat DC, XI or X

• Hello out there! I am trying to understand the relationship between the products. I am a current user of 13 items and sought to CC Photoshop with Lightroom. Always use elements like the storage tool to catalog my photos or it get replaced?

  Hello out there! I am trying to understand the relationship between the products. I am a current user of 13 items and sought to CC Photoshop with Lightroom. Always use elements like the storage tool to catalog my photos or it get replaced?

  It's kind of ridiculous. All I want to do is ask a question and there is no place to connect with anyone. Sucks!

  Hi charlesf,

  If you choose to go to CC Photoshop with Lightroom, Photoshop Elements would not be replaced.

  CC of Photoshop and Photoshop Elements are different programs, so the two will remain separate on your machine and catalogue items would not hit at all.

  Let us know if you have any other questions.

  Kind regards

  Claes

• Help! I tried to connect to my account of Cloud to work in after effects to another computer to adobe. My payment plan appears as the "free plan" so I can't use one of the applications now. I give the whole pack every month so I don't understand why that'

  Help! I tried to connect to my account of Cloud to work in after effects to another computer to adobe. My payment plan appears as the "free plan" so I can't use one of the applications now. I give the whole pack every month, so I don't understand why this is happening. I really need to work now and I can't. Great work Adobe Cloud. Any suggestions on what can I do? Thank you

  Check that your current account (and only the adobe, used in the next step id is good) by logging in here and check the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

• I do not understand why my creation of windows DVD burn only 1% of one of my windows movie maker projects.

  Hello

  I made a video of my Windows Movie Maker project and have tried several times to burn through my Windows DVD Maker with the burning of 7% max.  After that, it gets stuck.  However, my other several attempts were a result of burning of 1% and it stuck.  I've left overnight to see if it was the capacity but the next day it is still 1%.  I did other projects without problem.  It is only with this project.  I don't understand why it won't let me if I used Windows movie maker without problem.  The video was originally in AVI, but I was able to convert a 3GP using dvdvideosoft software. Then only, I have done a project using my Windows Movie Maker.  The full minutes of this project is 90 minutes, while the DVD that I want to burn it holds 150 minutes.  Can you help me?  Tried several things and can not find the solution.  I don't know that there must be a solution.

  What or who persuaded allows you to convert AVI, which is supported by Windows, to 3GP, which is not supported by Windows?

  If you must, convert AVI to WMV format.
  Bypass Windows Movie Maker.
  Add the WMV video in Windows DVD Maker directly.
  Try to burn now.

• trying to understand catsearch-help

  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
  PL/SQL Release 10.2.0.1.0 on windows server 2003 pack 1 service
  Trying to understand catsearch...
  I use
  http://docs.Oracle.com/CD/A91202_01/901_doc/text.901/a90121/csql3.htm
  http://docs.Oracle.com/CD/A91202_01/901_doc/text.901/a90121/cdatadi6.htm
  http://docs.Oracle.com/CD/B14117_01/text.101/b10730/cddlpkg.htm
  Cannot create a CTXCAT Index whose value index
  I started with the first link I mentioned above with a small change in create statement
  CREATE INDEX auction_titlex ON auction (title) INDEXTYPE IS CTXSYS. CTXCAT PARAMETERS
  ("set auction_iset index');
  Add "CTXSYS." before "CTXCAT", this is the only change
  using the position of Barbara Boehmer to the forum link I mentioned
  the query I use is
  SELECT REG_ID, NAME, PRODUCTS, ADDRESS1, LOWER (ADDRESS2) AS ADDRESS2, CONTACT_NAME, UPLOAD_THUMBNAILS, ACT_STATUS, IAM
  FROM (SELECT ROWNUM, REG_ID, NVL (SUBSTR (CAT_TYPES, 1, INSTR(CAT_TYPES, ',', 1, 8)-1), CAT_TYPES) AS PRODUCTS, ADDRESS1, LOWER (ADDRESS2) AS ADDRESS2, CONTACT_NAME, UPLOAD_THUMBNAILS, ACT_STATUS, IAM FROM MV_CAT_SEG_REG_PROD)
  where CATSEARCH (cat_types, "the solar water heating system *', NULL ') > 0 and rownum < 11 order by act_status desc)
  Please just look at the query after where clause (I know that the rest of it may seem complicated, but it does not help answer you my question then forget it)
  the first line that this query returns is
  "HYBRID SOLAR WIND, SOLAR LIGHT MANUFACTURERS SYSTEMS STREETS, SOLAR HOME, SOLAR LIGHTING, SOLAR WATER HEATERS DEALERS RUNNING DC AND AC LIGHTING SYSTEMS.
  so the question is why he comes back this line when there is no 'solar water heating system' in the same row
  :
  :
  So I try to copy the thing above to a table that I created in my local machine dummy
  Here is what I do
  The auction of CREATE TABLE (key primary number stuff, title varchar2 (200),)
  date of bid_close);
  INSERT INTO the auction values (1, "Sony CD Player" ', 20 February 2000 ");
  INSERT INTO the auction values (2, "Sony CD Player" ", 24 February 2000");
  INSERT INTO values of the auction ("3, ' Pioneer DVD player" ", 25 February 2000");
  INSERT INTO the auction values (4, "Sony CD Player" ", 25 February 2000");
  INSERT INTO the auction values (' 5, 'Bose Speaker', 22 February 2000 ");
  INSERT INTO the auction values (' 6, 'Tascam CD Burner', 25 February 2000 ");
  INSERT INTO the auction values (' 7, ' Nikon digital camera "", 22 February 2000 ");
  INSERT INTO the auction values (' 8, ' Canon digital camera "", February 26, 2000 ");
  insertion little more my own lines
  Insert in the AUCTION (stuff, TITLE, BID_CLOSE) values (10, 'Sony Bravia', to_date('24-FEB-00','DD-MON-RR'));
  Insert in the AUCTION (stuff, TITLE, BID_CLOSE) values (11, 'Sony VAIO Laptops', to_date('24-FEB-00','DD-MON-RR'));
  Insert in the AUCTION (stuff, TITLE, BID_CLOSE) values (12, 'cum Writer Sony CD player', to_date('24-FEB-00','DD-MON-RR'));
  Insert in the AUCTION (stuff, TITLE, BID_CLOSE) values (13, 'drive Sony CD and Burner', to_date('24-FEB-00','DD-MON-RR'));
  exec ctx_ddl.create_index_set ('auction_iset');
  exec ctx_ddl.add_index ('auction_iset', 'bid_close');
  CREATE INDEX auction_titlex ON auction (title) INDEXTYPE IS CTXCAT PARAMETERS
  ("set auction_iset index');
  There is no sony drive in the table at auction, so the following query returns no rows
  SELECT * FROM auction WHERE the CATSEARCH (title, ' the sony reader *', NULL) > 0;
  SELECT * FROM WHERE CATSEARCH auction (title, ' sony-reader *', NULL) > 0;
  so, if it's here not to return all the rows (which is what I was expecting) even above it should not return of the straight lines?
  but he's back... Why? How?
  Please help me understand the catsearch
  Please let me know if you need some data more
  Thanks in advance
  
  Edited by: 946207 September 29, 2012 15:35

  When you search for "" word1 word2"" with double quotes, it returns anything that contains the words "word1 word2". It does not account for things like hyphens, unless otherwise stated, by setting the hyphen as printjoins and skipjoins.

  When you search for "word1-word2" without spaces around the hyphen, it's the same as above, unless you set the hyphen as printjoins and skipjoins.

  When looking for the "word1 word2 *", it returns anything that contains the word "word1" and any word that begins with "word2".

  When you search for "word1 - word2 * ' with a space on each side of the hyphen, it returns everything that contains the word"word1"but does not provide any word that begins with"word2 ".

  This is explained in the first link you provided.

  See the below simplified example.

  SCOTT@orcl_11gR2> CREATE TABLE auction
    2    (category_id  NUMBER,
    3       title          VARCHAR2(60))
    4  /
  
  Table created.
  
  SCOTT@orcl_11gR2> BEGIN
    2    INSERT INTO auction VALUES (1, 'Solar water heater system');
    3    INSERT INTO auction VALUES (2, 'SOLAR WIND, WATER HEATER DEALERS, LIGHTING SYSTEMS');
    4    INSERT INTO auction VALUES (3, 'sony reader');
    5    INSERT INTO auction VALUES (4, 'sony-reader');
    6    INSERT INTO auction VALUES (5, 'sony CD reader');
    7    INSERT INTO auction VALUES (6, 'sony CD Player');
    8  END;
    9  /
  
  PL/SQL procedure successfully completed.
  
  SCOTT@orcl_11gR2> CREATE INDEX auction_titlex
    2  ON auction (title)
    3  INDEXTYPE IS CTXSYS.CTXCAT
    4  /
  
  Index created.
  
  SCOTT@orcl_11gR2> -- any title with the phrase "solar water heater system" in it:
  SCOTT@orcl_11gR2> SELECT * FROM auction WHERE
    2  CATSEARCH(title, '"Solar water heater system"', NULL)> 0
    3  /
  
  CATEGORY_ID TITLE
  ----------- ------------------------------------------------------------
            1 Solar water heater system
  
  1 row selected.
  
  SCOTT@orcl_11gR2> -- any title with the word "solar" and the word "water" and the word "heater"
  SCOTT@orcl_11gR2> -- and any word that starts with "system":
  SCOTT@orcl_11gR2> SELECT * FROM auction WHERE
    2  CATSEARCH(title, 'Solar water heater system*', NULL)> 0
    3  /
  
  CATEGORY_ID TITLE
  ----------- ------------------------------------------------------------
            1 Solar water heater system
            2 SOLAR WIND, WATER HEATER DEALERS, LIGHTING SYSTEMS
  
  2 rows selected.
  
  SCOTT@orcl_11gR2> -- any title with the phrase "sony reader", ignoring hyphens
  SCOTT@orcl_11gR2> -- (would be different if the hyphen was defined as skipjoin or printjoin):
  SCOTT@orcl_11gR2> SELECT * FROM auction WHERE
    2  CATSEARCH(title, '"sony reader"', NULL)> 0
    3  /
  
  CATEGORY_ID TITLE
  ----------- ------------------------------------------------------------
            3 sony reader
            4 sony-reader
  
  2 rows selected.
  
  SCOTT@orcl_11gR2> -- same as above:
  SCOTT@orcl_11gR2> SELECT * FROM auction WHERE
    2  CATSEARCH(title, 'sony-reader*', NULL)> 0
    3  /
  
  CATEGORY_ID TITLE
  ----------- ------------------------------------------------------------
            3 sony reader
            4 sony-reader
  
  2 rows selected.
  
  SCOTT@orcl_11gR2> -- any title with the word "sony" and any word that starts with "reader":
  SCOTT@orcl_11gR2> SELECT * FROM auction WHERE
    2  CATSEARCH(title, 'sony reader*', NULL)> 0
    3  /
  
  CATEGORY_ID TITLE
  ----------- ------------------------------------------------------------
            3 sony reader
            4 sony-reader
            5 sony CD reader
  
  3 rows selected.
  
  SCOTT@orcl_11gR2> -- any title that contains the word "sony"
  SCOTT@orcl_11gR2> -- but does not contain any word that starts with "reader":
  SCOTT@orcl_11gR2> SELECT * FROM auction WHERE
    2  CATSEARCH(title, 'sony - reader*', NULL)> 0
    3  /
  
  CATEGORY_ID TITLE
  ----------- ------------------------------------------------------------
            6 sony CD Player
  
  1 row selected.
  

• [noob] Help understand why the event listener continues even after the withdrawal.

  Hey again,

  I'll try to do my best to explain. I can get this to work properly, but I'd like to understand why what I did before was not working.

  I have a little trouble understanding why an event listener continues listening to even after that I delete it. I have a facility where a Parent MovieClip ("CampScene") is established and an event listener is added to the look for a function ("walkUpToCampfire") to see if a condition is true ("comingFromAx is true", that won't be true until later).

  If it is true, an animation plays, an event listener is added to see if the animation is made and if it's an event listener is added to listen for a click ("campScene.goToAx") to a new animation to play and other events. (It won't be true until later.)

  If this isn't true (which is the situation that I work with at the start), the event listener said listening for a click on "campScene.goToAx" is implemented immediately. The function following removes the event listener, so it is supposed to stop listening to a click and let an animation play throughout.

  The problem is a continuous click to be listened to and if you keep clicking on the reboot of animation every time, which is what I don't want to happen.

  --------------------------------------

  I'm able to resolve the problem by adding the line "campScene.removeEventListener (Event.ENTER_FRAME, walkUpToCampfire)"; or in mouseEnabled affecting false for "campScene.goToAx", but I try to understand what is happening.

  It is, even if I'm deleting the listener ("campScene.goToAx") in a function ("goToAxScene"), "campScene.addEventListener (Event.ENTER_FRAME, walkUpToCampfire)"; continues to wait for a mouse click, unless it is removed also?

  Again, I am trying to understand how it works.

  --------------------------------------

  This should be all ACEs. Of course, I would like to know if you need more information. (I can post the FLA / AS files if need be.)

  public void practice_adventure8() {}

  ...

  initial event listeners

  addEventListener (Event.ENTER_FRAME, CampScene);

  }

  public void CampScene(event:Event) {}
  
  remove the event listener
  removeEventListener (Event.ENTER_FRAME, CampScene);
  
  Add the first camp scene
  campScene.x = - 120;
  campScene.y = - 10;
  addChild (campScene);
  setChildIndex (campScene, 0);
  
  Add the event listener to see if guys works with camp fire or not
  campScene.addEventListener (Event.ENTER_FRAME, walkUpToCampfire);
  
  }

  IF RETURNING TO CAMPSCENE
  public void walkUpToCampfire(event:Event) {}
  
  If the guy is walking back to axe
  If (comingFromAx == true) {}

  event listeners
  campScene.guyAtCampScene.gotoAndPlay ("guyComingFromAx");
  campScene.addEventListener (Event.ENTER_FRAME, ifGuyDoneWalking);
  
  otherwise if initial creation
  } else {}
  
  remove the old event listener
  campScene.removeEventListener (Event.ENTER_FRAME, walkUpToCampfire);
  
  trace ("comingFromAx = false");
  event listeners
  campScene.addEventListener (Event.ENTER_FRAME, sceneHoverInfo);
  campScene.goToAx.addEventListener (MouseEvent.MOUSE_UP, goToAxScene);
  campScene.goToBridge.addEventListener (MouseEvent.MOUSE_UP, goToBridgeScene);
  }
  }

  IF RETURNING TO CAMPSCENE FACT
  public void ifGuyDoneWalking(event:Event) {}
  
  If the guy ended up in foot
  If (campScene.guyAtCampScene.currentLabel == "guyAtCampSceneNormal") {}
  
  reset the Boolean values of scene
  comingFromAx = false;
  
  Add event listeners
  campScene.addEventListener (Event.ENTER_FRAME, sceneHoverInfo);
  campScene.goToAx.addEventListener (MouseEvent.MOUSE_UP, goToAxScene);
  
  }
  }

  GET READY FOR THE NEW SCENE

  public void goToAxScene(event:MouseEvent) {}
  
  delete movement event listeners
  campScene.goToAx.removeEventListener (MouseEvent.MOUSE_UP, goToAxScene);

  
  stop all sounds
  SoundMixer.stopAll ();
  
  play the clip of guy walking to AxScene
  campScene.guyAtCampScene.gotoAndPlay ("guyGoingToAx");
  
  check the label to see if axScene must appear
  campScene.guyAtCampScene.addEventListener (Event.ENTER_FRAME, addScene);
  }
  

  Your best bet to solve why things happen is to make use of the trace function.  In this case, you may have a trace run every time this listener can addedand any time it is deleted.  In this way, you should be able to see if it was added in after he deleted.  If there are several places where it is added, then adjust your tracks to indicate which line is involved as well.

• Base class for understand - trying to understand AS3

  I'm relatively new to AS3 and AS in general, so forgive me...
  
  Is I understand that there is no abstract classes and you can override or overload the constructors of classes derived correct? Abstract classes are not important to me, but if possible I would like to know how. But is it possible to overload the default constructors and I do just something wrong? Can override us only the methods or we can overload them too. Workarounds would also be appreciated.
  
  Here's what I do now to make things work.
  
  -For a simple game that I do, I do not use FlexBuilder and don't want for this project for specific reasons, so I use Flash and instead to use bitmaps and sprites, I want to draw shapes in Flash and hidden in the MovieClip symbols that I 'link' for export as for use in my code. I want to make a little modular so can I just change some aspects of the code for different approaches.
  
  If I create an actor class that extends MovieClip the default constructor must be Actor() without argument. But I want my class to be able to have arguments as coordinated initial x and y. I know that you can just create methods to initialize every part, but I would try to have a default constructor to do.
  
  In Flash, I notice that if you derive a class written or built in class requires the standard constructor by default, "I may be wrong on someone could show me what I'm doing wrong and I hope I'm ', if you derive a class based on a symbol you export related LIKE I can create a new constructor , with whatever the arguments, I want (so that's why I'm doing this post, I found if I can do it couldn't there be a way to substitute manufacturers?).
  
  Here is how I currently do...
  
  (1) so that I create a base called actor class that extends MovieClip the record as a Builder by default and Actor.as of Actor() add some properties I want.
  (2) then I create an object in my library, let's call it mcShip, then I link this symbol to export ActionScript and have its base as an actor class and name the class ShipMC.
  (3) I then create a new .as file and call this a ShipActor.as, this ShipActor class extends ShipMC and then I create a default constructor ShipActor (gs:GameScreen, xA:Number, are: number) and it works fine
  (I also create a method in the class actor called ActorSuper and call from ShipActor with any arguments passed in, because I do not know how to overload the constructor of the parent class)
  
  If I just had my mcShip with a base class of flash.display.MovieClip and I'm trying to create a ShipActor with the constructor above it says missing default constructor. The 3 steps above is the only way I can get it to work for now. Is it possible to overload the constructor? If this isn't the case, are there some other workarounds?
  
  I seek only to this object oriented approach more than anything. Sorry for the long post but I didn't want any confusion or confusion more-. -.
  
  Thank you for taking the time to read this post
  -John

  Your rationale that you cannot define class abstract in ECMA based actionscript or Actionscript allows overloading at all. There are two solutions to workaround if such have also just your overloaded methods use a single object as its argument and this object contains the various parameters.

  I find developing in the difficult at best Flash IDE if you want another option besides flex builder, you can use eclipse with FDT kit webtool. What doesn't is that got 30 days free, but its value to buy (believe me). A tip is to install the latest version of the flex sdk and to change the library source in it so you can use Ant to build your SWFs.

  I was just about to an object called actor extends Sprite instead of MovieClip package unless you're going to manipulate its chronology (why would you however). If you need a check-out package TweenLite of GreenSock interpolation. Its better than the default flash.

• I try to get an update of the software update, but he kept saying ' this phone (Iphone 5 s) is not onger connected to the internet while I am using internet.» Please help me understand why.

  I'm trying to get a software update IOS 9.3 as reminded me. He repeated that "impossible because you are no longer connected to the internet while I am on the internet. Please help me understand why. I did it many times, but it's really annoying

  The iOS 9.3 update was pulled for iPhone 5s and older iPhones because of activation problems. He will be unavailable for the next few days.

• Why is there's no sound or pictures on my CD player

  Only when to place a cd in the computer I can hear it running, but nothing happens, and there is no sound. Thanks for the help! Finally got imported images from the camera to the computer but are still struggling with the CD, a DVD player! Congratulations!

  Table of contents on the double thread:

  Why no sound or pictures on my dvd cd player

  Thanks for the suggestions but nothing fixed. My computer is a laptop Toshiba 750. With windows7. The player will not play any pre-recorded CD or photos. It looks like the cd turns but nothing happens. With my camera I went to auto play and then it worked but I can' see something to help the cd player. I tried troubleshooting and all it came with, was that the lexmarkx422 does not open. Fix couldnot fixit. Device Manager, said the device was okay thanks

  Hello

  I suggest you perform the steps described in the article.

  Run the Fixit or perform the steps:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information helps. Please reply with the status so that we can help you.