I made a terrible mistake...

Similar Questions

• the payment was made TWICE by mistake

  the payment was made TWICE by mistake. What should I do next? I chose the annual plan with a monthly payment

  This is an open forum with a mixture of other users and the staff of Adobe, Adobe support not... you need Adobe support

  Coordinates of Adobe - http://helpx.adobe.com/contact.html can help

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Made a big mistake in trying to get rid of the partitions on the coming Pro 8. Operating system does not load!

  Hello

  First time on this type of forum so I hope that what I write is logical.  So, here.  I have improved my coming 8 Pro for Windows 10 and after the update it told me that I needed to make space on the disk.  I looked and there is not a lot of programs that I have removed looked beyond and found that there are 2 partitions that had almost 6 shows assigned to them which were not used.  I tried to reclaim that space.  I made a copy of recovery on the micro SD and that seems to work very well.  Then I fiddled around until I could remove the 5 + GB partition and reassign it to the primary partition.  The second partition (about 750 MB) I was able to free up, but as it was before the main partition, I wasn't able to retrieve space in the primary partition.  I downloaded a utility recommended to try to move at the end of the main partition so that I could get it back like this.  Everything seemed to work but it stopped crashing and I got a blue screen of Windows saying that "the application or the operating system could not be loaded..." ».  I figured out how to get into the bios to see if I could change the boot sequence, I created a windows 10 bootable USB and after a lot of work finally got the tablet to boot from USB.  At this point, Windows 10 wanted to re - install (which I'm fine with) but the only problem is that the touch screen unresponsive!  I assume that the driver is not loaded on a USB boot.

  Now I am trampled.  I don't really know how to go further.  Is there a way to get the drivers to load from the USB?  Can I send my tablet in a magical place where qualified technicians will be re - build it for me?

  Any assistance or moral support would be greatly appreciated.

  Thank you

  Richard

  Would you go through the process, and when you need to use the touchscreen, join via the microUSB port and an adapter USB OTG, a wired keyboard (and mouse wired, if necessary, via a multiUSB adapter attached to the adapter USB OTG) and then complete the installation of this way?  At this point, you can download the required drivers from the Web page of the Dell product support and win your touch screen feature back.

• Terrible mistake 3500 with DONKEY Playbook

  Hi all

  I've been tinkering with AIR for Playbook native extensions, but have been unable to make it work. I kept getting error 3500 "the context of the extension has no method '. I scaled down and made the simplest use case, the DONKEY example hello world. Same result.

  I searched the forum, and the inclusion of the "bps" library does not help (). I tried debug, release configurations, cleaning explicitly compiled before build on NDK and Flash Builder files, remove and replace the mention of DONKEY, recreate all projects, nothing worked.

  My setup is FlashBuilder 4.6, Flex SDK 4.6 with Air 3.1, NDK 2.1.0 on windows 7. I even reinstalled the NDK and redownloaded the Flex SDK kit. The #3500 error keeps appearing.

  I can hardly believe that the NDK / FlashBuilder will be a such fault them so I gues I'm doing something wrong. If someone managed to successfully carry out and use a DONKEY in an AIR on Playbook application? So if you did something more to operate or you have a skeleton of a working draft that you could share?

  Thank you!

  Hey, thanks for the suggestion.

  I searched on this basis and found that it should add the following line in the bar - descriptor.xml:

  run_air_native

  In fact, this is specified in the BB10 dev guide, but there is no mention of this part of the Playbook. Anyway, problem solved!

  Thank you all for help.

• Why made a small mistake on a VMX file such a pain?

  It is more a question for the developers and maybe the experts.  But why, when you make a small mistake when you change a VMX file, uploading it to the location of theVM data store, it backs up, starting then kicked with an error that gives an error stack then causes the virtual machine to do this:

  

  It seems stupid.  If I can reup the VMX corrected, you still cannot recover.  There should be some sort of refresh button, so it scans the directory and the VMX still once, realize the mistake has been corrected and then giving access to the virtual machine again.

  Only one I found today to fix this, is to click with the right button on the invalid VM in the inventory list, remove the inventory.  Go to the data store and the record of the location of the virtual machine.  Right-click on the corrected VMX file and say "Add to inventory" and follow the instructions in the wizard.

  Why that is so long winded?  What is the problem with my original suggestion to just a refresh button.  Who will be rescan him previously failed VMX file, then find there now and allowing access to the power on the virtual machine again.

  Seems strange.

  Two error put today

  isolation.tools.guestInitiatedUpgrade.disable = "FALSE".

  In the VMX file twice.

  Then second mistake (in order to correct the error, just so that I could make a guide for fixing work) was forget to replace the quotes "when they are copied from a Web site, it uses different stylized quotes that don't like VMware.

  Tiny errors, but how long breath to get the virtual dos machine.

  Why not just use the vSphere Client to make these. VMX changes. Property editor of virtual machine-> tab Options-> general in the left pane-> button Configuration settings. Add the values y and no more manual. VMX edits.

• Made a horrible mistake, now there is no solution?

  Please, read this and don't waste your time telling me stupid, I was, or how I should not have done that. I know that, believe me. I'm looking for are the possible solutions. At this point, it seems that there is not, I searched a days. But I'm depending on you people to find a solution that will ease my pain.

  I have apps cluttering everything on my iPhone and iPad. I was really stupid to believe that IOS resembled my Mac that I could uninstall a program at any time I wanted.

  But when (for example), I wanted a free calendar app, I downloaded a dozen different calendars, tried them, pick one that suits and threw the rest. Alas, the problem. Apple has decided that once you download an app, then you must have this app associated with your name, to death.

  Now, every update restores a dozen calendar apps I've tried every possible means to remove. Who multiplied by the number of applications in addition to calendars. I have literally hundreds of silly applications that were loaded until I discovered that you can never get rid of them no matter what happens. Even the foreign language that I have ever used. They all keep coming back.

  You can suggest that I have just do not update. But they appear on my App Store and don't go away until I click on update.

  You can suggest that I have hide. This seems to be a temporary skin, until a reboot or an update.

  I'd only like to know that Apple wants to keep popping these apps on my iPhone until I downloaded a few embarrassing online dating applications at a party once. My wife wasn't laughing when the apps kept popping up on my phone.

  Well, I know that I've screwed up. I'll never download apps again. But what I can possibly do?

  What you describe is in no way the behavior that should be exposed.

  How, exactly, you delete your iPhone apps?

  How do you update your applications? Via iTunes?

• I made a horrible mistake; I deleted the folder files in the revival of "D" drive... help?

  Hi, I have a HP H2M97AA #ABA computer, Windows 7 and Office 2010.

  Last weekend, I tried to make room to back up external tips on one of my hardrives.  I kept getting confused by this directory "Recovery D" because it contained files with names that I would have given them. they have no names system generated.  So I deleted them stupidly.

  NOW my system backup; I get an error that it couldn't back up because he can't find the drive.

  Does anyone know 1) what steps to take to create those back ups on the disk "D Recovery?

  and

  (2) how to make a backup of this drive; When I go into the drive "D Recovery" backup utility is no longer an option.

  I would be happy for any help.

  Now I'm living that... just enough knowledge to be dangerous... thing.

  Thank you.

  Rosemary

  I'm a little confused, so I'll just make a comment and you can answer.  The D:Recovery drive is not for use.  It contains the files needed to restore the PC to a State of "new factory".  It should not be used for anything else, point.  If the player was used for something else, then he should have given a warning that the disk is full.  Any "backup utility" should be pointed to another drive for file backup files and the D: drive is not present as a destination point.

• How can satellite C855D-16J - I get Windows 8 back to normal?

  It's a long story how it all happened.
  Basically, this all started when I decided to give Ubuntu a go.

  After spending with the installer and have finished installing, I realized that I had made a terrible mistake; I had cleaned up my hard drive completely.

  Then I had to spend hours to find a method reinstall Windows 8. I have found a useful post on some forum and burned a recovery of Windows 8 ISO on my USB key.

  Installation was successful and I get back Windows 8, or so I thought...

  It turns out that I had only an evaluation version. On my desktop, it says the following:

  "Windows 8 business valuation.

  Valid Windows license for 90 days

  Build 9200'

  I thought that if I could use the product key that is hidden in the BIOS, using Keyfinder, I could get working again with [this | http://windows.microsoft.com/is-is/windows-8/upgrade-product-key-only], but nope. I got the error: "this product key cannot be used to install the retail version of windows 8'

  My laptop is a Toshiba Satellite C855D-16J, comes preinstalled with Windows 8. I would like to know how to get this thing running again.

  I don't have any money to spend (not that I should have to spend anything) and as emergency aid, please. Some ISO or key or whatever it is. Just lose my files, I won't be stuck with a laptop that I can not use

  Thank you.

  It seems that you did not create the Toshiba Recovery disk which is advisable in order to reset the computer laptop back to factory settings

  In this case, you can order the disc missing from here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Satellite X 205-S9800 - update Bios failure of process

  Hello guys, I have a very big problem

  I have or at least I got a TOSHIBA Satellite X 205 - S9800 laptop with 4 GB 667 ddr2 sdram installed, fsb and I downloaded the new v2.5 update of the bios from the Web from Toshiba website.

  I started the process of update in windows vista using the phoenix Toshiba bios update utility and while the utility has reached line 2 of 18, there was a vista blue screen of course followed by a system crash. I should mention that I had problems with before blue screens because of the ram I think.

  In any case, I had no choice but to disconnect the power cord and remove the battery, because the power wouldn't button? t is longer, and now when I try to turn on my laptop, it powers just up to the graphics card and cpu coolers and power led light.
  Of course, the screen remains black, the second I take my finger on the power button it turns off. When I plug in the power cord, it does the same thing, but without pressing me the power button.

  I wonder what should I do, because obviously the bios has failed, and now I have to reschedule, my question is, where he is on the motherboard, or if someone knows the part number. I have some skills in electronics.
  I can replace it, because I have find a new somewhere, or is it possible to remove the chip, connect it to an Eprom special peripheral reprogramming and actually write the image of the bios again. Or is there any life in the chip?

  I mean it would help if I find a USB floppy and try to reprogram this way.
  For any help or suggestion would be gladly appreciated, because obviously this is a terrible situation, and I made a terrible mistake, which can actually be deadly.

  Thank you in advance, I hope I have this issue

  OK guys, I found the eeprom part number (CSI) W (I) 16-16 k CMOS EEPROM 24 c series with 128 pages with 16 bytes each, ca? s 2048 KB, packed in a box of 8-Lead SOIC, so I should be able to remove the motherboard, attach it to a serial interface and reprogram (still doing some research on it).

  By all means if you have any suggestions, they are gladly appreciated.

• Equium M50-216: Vodafone 3 G Datacard issue

  I just bought the laptop above and everything when trying to install the portal Vodafone 3 g data card, the software will install ok, but I get a message error "The Sim is not ready".

  I have another PC Toshiba laptop and have no problem with that. Vodafone have implemented it there is no problem with the data card and advised it is without doubt the computer.

  Can anyone confirm if this model accepts data cards, or if I made a terrible mistake.

  Hello

  I put t know why this error message occurs, but I checked the forum and noticed that certain PCMCIA Vodafone cards were not compatible on some laptop models. Especially the new version of the software has solved the problem. I would recommend contacting the support of card making. Maybe you'll get more details.

  PS: Please post if you have any news.

  Good luck

• Satellite A200 - the fan speed with BIOS v2.50

  Hello

  I have laptop Satellite A200 - 28 p PSAE6E I bought 2 monts ago. I made a terrible mistake 2 days ago and updated the BIOS on the computer of the Toshibas website to v2.50. fan began acting very strangely that he starts every time that runs for 20-25 seconds 30 seconds later stops again which is really annoying.

  I study at night which is very quiet for the fan noise is very disturbing. I would like to downgrade the BIOS with a version more old if someone could help me I would be very happy. I talked with the guys at toshiba and they said they cannot do anything,
  Thank you...

  Hello

  V2.4
  http://uploaded.to/?ID=0un50q

  V2.2
  http://uploaded.to/?ID=0fggyd

  V2.1
  http://uploaded.to/?ID=hokvg0

  I hope this will help u
  CU

• Y700 PSA - sleep turns into a BRICK - no display, Black Screen of Death

  I fell in love with my new computer... in 8 hours about to get everything set up.

  We were so good together. Then, I made the terrible mistake of sleep.

  No chance of ever waking up.

  I studied 4 years electrical and computer engineering for 1. I've never had a "computer problem".

  I make my living on my computer and it is one of the worst things that can happen to me. I've already lost hundreds of dollars, not to mention the great for the lappy.

  I've seen what seems like hundreds of other poster on this forum with the same problem and the only answer I've seen Lenovo was to correct some grammer guy and tell him don't not to curse. Hahahahaha!

  I bought only from Lenovo for years today, including 3 for different customers.

  Lenovo if you know about it why not tell people who buy not to go out to sleep as long as you fix?

  Put your computer to sleep and turning in a brick should never be an option... but if it's say your amazing clients do not upgrade their computers to sleep!

  In response to customer relationships that Y700-15ISK and 15ISK-Y700 Y700 - 17ISK computers laptops Touch awaken no mode 'sleep', may restart unexpectedly or may show a yellow exclamation, Lenovo has provided a TIP Service.

  The CONSULTING Service is available here: https://support.lenovo.com/us/en/documents/SF16-I0012

  Thank you

• HP Officejet Pro 8500 A909a - cartridges rejectted

  Made the terrible mistake using a substitutecartridges less expensive from a supplier online which worked well for a while.  Just a little time, however.

  Just replaced with genuine HP cartridges, but they are all rejected by the printer.  Message tells me that they (listing all of them) appear to be missing or damaged.

  I tried the HP Support and drew a blank.

  I took them.  Out during a few minutes and replaced all the cartridges, but still the unhappy message flashes to me.

  Now huh?  Would be grateful for any suggestions before as I throw the printer and HP NINE cartridges by the window!  Thank you.

  Hi @Daisy99,

  Welcome to the HP Forums!

  I understand that you have found the error, the ink cartridge appears to be missing or damaged, with all your new ink cartridges. I'm happy to help you!

  Please take a look at this guide. A "ink cartridge appears to be missing or corrupt" control panel displays error on the printer.

  If the guide does not solve your problem, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  I hope this information helps and thank you for posting!

• HP Compaq 6730 b: 10 Windows

  Hi all

  I was the proud owner of a HP 6730 b running Windows 7. I made the terrible mistake to install Windows 10. Now, Windows does NOT detect when I attach a second screen, be it a second monitor or a TV, or anything else. I know for a fact that other users have had the same problem. Anybody get a ground ve question? If so, HOW? Any help would be greatly appreciated.

  @brutium: do not have an answer for you, except to say that HP machines use a hardware specialist, especially switchable or hybrid graph - and those have serious problems with the Win10 upgrade for two reasons.

  First, the compatibility assessment tool Win10 does a bad job to detect this type of material before the update, so instead of saying NO to day, he goes ahead and does it.  When subsequently, the update fails, or if it succeeds and leaves the machine is a corrupted state, it is the fault of not checking properly in advance upgrade tool.

  Second, even if the update is successful, since there is no drivers HP Win10 and MS does not work Win10 graphics drivers necessary switchable, you're left with defective graphics. HP guarantees only Win10 updates won't work for machines manufactured after August 2013.  They have produced no timetable on when, or if, they will produce Win10 new drivers for older machines.

  I'm a volunteer and I do not work for, or represent, HP.

• Pavilion x 2 10-n002na: windows 10

  Hello

  I made a terrible mistake. I was very happy with my computer until a few nights ago when he informed me that I had to upgrade my version of Windows 10. He was already running Windows 10 but said that the new version has been useful to. I pressed the keys appropriate to set things in motion, but I received a message telling me that I didn't have enough space, so I inserted an SD card in the slot and have already told him to use it. It all seemed happy.

  About 13 hours later, he was chugging along at 40% complete. I checked again at 20 hours, always at 40%. Then I did a search and found that apparently the upgrade can be done with an SD card.

  So, what to do? I decided to risk thinkgs by restarting.

  After a short pause the message "Attempt to recover the installation..." "flashes for a second, then"restore your previous version of Windows... ". "rest on the screen.

  Computer restarts after about 5 minutes, but it is not clear the checkpoint.

  Can someone tell me how to solve this problem?

  Help!

  Hi Andy,.

  Rather than fix the boot priority in the Bios of the Menu (F10), try the following.

  Turn on the laptop.

  Insert the Windows 10 flash drive, and then hold the power button for 10 seconds to make sure the laptop is turned off.

  Now on TAP the ESC key as soon as you press the power button to launch the Start Menu.

  Select Boot Manager F9.

  If the flash player comes here, use the arrow keys to select the option flash drive (uefi) and press ENTER.

  Kind regards

  DP - K