I managed to do my monitor outside my main monitor, but it says no signal and the screen of my laptop is black. Help, please

Similar Questions

• hp2009 monitor turns on says no signal goes to sleep mode.useing a hp6000

  power system off and then on again, lights monitor says no signal and goes to sleep

  Hey there @mholmes940, I thank you for joining the HP Forums!

  I understand that the monitor says no signal and goes to sleep.

  Please try a few steps mentioned below.

  Click Start, Control Panel, system and Maintenance and then click Power Options.
  Select high-performance, and then click on change plan settings.
  Change the settings to never.
  Click on the button Save changes to accept the changes and restart the computer.

  Also make sure that the graphics card is up-to-date.
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, look for graphics card you want to update, and then double-click the device name.
  3. click Driver tab and click on set to update driver and follow the instructions.

  Additionally, make sure that the cables that connect you to monitor are correctly connected, or use a different video cable.

  I'll watch for your reply.

  Have a great day!

• I'm trying to plug in an external monitor without success. I'm getting a signal on the screen again that there is no signal. What I'm doing wrong?

  I tried to connect another monitor using a connections of type d with an audio input jack separate pins. I have no video or sound on the new monitor even when I select the pc on the screen input.  I'm trying to hook up a monitor from 42 "to my laptop, so I can stream videos.  ANY IDEAS WOULD BE APPRECIATED CONTACT ME AT * address email is removed from the privacy * or * address email is removed from the privacy * Thank YOU

  Hello

  I suggest you to consult the following Microsoft article and check if it helps.

  Understand multiple monitors:

  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

  Add a second monitor:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-second-monitor

  Change the display settings on multiple monitors:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-display-settings-on-multiple-monitors

  For more information, see the following Microsoft article.

  Solving the multiple monitor problems:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems

  Multiple monitors: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

  Hope the information is useful.

• the screen of my laptop is broken and it does not start with a monitor

  Hi all hope someone can help me here.

  I have a laptop with a broken screen I get the start to the high view until happens start in SafeMode with networking etc. or start normally everything is ok it doesn't matter if I click Start in safe mode or normally happen at a screen black flashing several times all first please can someone help I just want to check that everything is ok before we get a new screen for this laptop.

  However I was going to find the computer and I put in my windows ultimate cd and all the colors and options came, but he told me that I had to wipe the computer first wil a right recovery cd so if I don't!

  Hello

  ·          The question started after the screen was broken?

  Step 1: I suggest you to connect an external monitor and see if the problem still occurs.

  Step 2: Disconnect any external devices (printers, scanner, USB (universal serial bus) drives, etc...) Except the keyboard and mouse) and then start.

• Multiple display (cloned monitor) and THE screen is pink.

  I'll try to clone my desktop on another monitor and my normal computer screen is the right color but the other monitor is ROSE!

  I checked the connection, and it is secure, ideas please?

  Appreciated :)

  Take your monitor to another computer and borrow the monitor from that computer to put on your.  That should quickly indicate if the monitor is bad or if there is a computer problem.  If you have two monitors are trying to exchange the first to the second and vice versa.

  "stevepayne1994" wrote in the new message: * e-mail address is removed from the privacy... *

  I'll try to clone my desktop on another monitor and my normal computer screen is the right color but the other monitor is ROSE!

  I checked the connection, and it is secure, ideas please?

  Appreciated :)

• U2414H DisplayPort 1.2 STD Set Up - monitors will not get video Signal from the graphics card during start or restart

  * What specific Dell monitor? 2 two U2414h monitors with MD214 - package of multi-monitor support
  * What specific model of computer, desktop/laptop? Workstation HP xw8400, Intel Quad Core Xeon CPU E 5335 @ 2.00 GHz, 4.00 GB of memory
  * What operating system? Windows 7 Professional 32-bit
  * Which video card? AMD over-pants V3900
  * Which ports are available for the video card? DisplayPort 1.2 STD, Dual-link DVI
  * Which video output from the video card port video on the port monitor do you use? Output Mini DisplayPort Display port in
  * What cable are you using to set the video card to the monitor? Adapter DisplayPort to MiniDispayPort - we came with every Dell monitor
  * You use the Dell supplied cable? Yes - two monitors

  * Press the Menu button of the monitor to open the OSD (On Screen Display). The bottom of the screen should display a resolution. This resolution should match the resolution of the default monitor. The two monitors: 1920 x 1080, 60 Hz

  * Brief description of the problem monitor? Monitors have been implemented following the instructions on page 25 of the Dell online manual to connect the monitor to function DP multi-flow (MST). DisplayPort cable is connected to V3900 output MiniDisplay port DisplayPort graphics card in the 1st U2414H; second DisplayPort cable is connected to the DisplayPort on 1 U2414H monitor output and MiniDisplayPort in the 2nd monitor U2414H. Dell U2414H drivers have been installed from the CD provided and both recognized by Windows. V3900 graphics card Driver is up to date with the EyeInfinity software. Source of input on both monitors the Mini Display Port value. Display settings on both monitors Display Port 1.2 value activate. Resolution of the screen on Windows 7 shows: (a) two separate Dell U2414H (mini Display Port) screens, with each resolution 1920 x 1080, multi (b) displays the value "to extend these displays. The two views work with Setup leading up to and acknowledged by the graphics card.

  Problem 1 - all the time - monitor power buttons are lit, the computer is turned on, then monitors lights don't - they show 'Power save mode' and then turns off. To hit the power button on the computer to shut down Windows. Only way to get these on monitors is unplug cords from the back of each monitor, wait a few minutes, plug in the power cord, start computer and then both monitors will start up and sign of windows to the screen will appear and monitors will work. Normal operations for a full day of work if you do not restart. If you need to restart during the day (like when you get a software update), the same thing happens. Start the computer to restart, but the monitors come back on not and remain dark. There is nothing wrong with the graphics card V3900. He is certified by AMD and DisplayPort.org to work in an environment of STD DisplayPort 1.2. I had previously two 215tws Samsung SyncMasters connected to each output V3900 Grahics card and they work very well in extended mode for years until a SyncMaster 215tw started shaking like crazy. A SyncMaster has been connected to the out display with a dongle and a DVI cable Port. The other SyncMaster was connected to the DVI output on the graphics card. So I decided to buy these two U2414Hs. Technical support Dell after many phone calls and e-mails finally advised me that there is a problem of "compatibility" between my computer and the U2414Hs and recommended that I return the monitors. On the web site of the U2414H AMD has not been certified by AMD to work in a DisplayPort 1.2 STD Set Up. Other former Dell monitors are certified by AMD to work in the Display Port 1.2 Setup. DisplayPort.org lists the U2414H to work with Display Port (it does not say that it will work in a DisplayPort 1.2 Set Up).

  Problem 2 - shift perceptible in the entrance of Microsoft Blue Tooth keyboard and mouse and PS2 Keyboard and mouse. All the drivers are up to date. When you type a phrase, it takes a few moments for the text displayed on the screen using a keyboard. Both the mouse connected and the Bluetooth mouse are unresponsive sporadically for a few moments until they finally react. It happens regularly during the day. The monitors provide excellent clarity when you work. The stand is ideal for office property. Before these monitors are returned if no one knows what causes these two problems and does anyone have a solution? Should I stop using the Display Port 1.2 and hang them using HDMI with active dongles? If I have to return these two U2414Hs, I considered the 2 two U2413s. Someone at - it all opinions on the last U2413s from Dell? I have read some real problems with ghosting that I just haven't the time for more. The remanence correction in the models of U2413 sold in 2014? There are very few monitors on the market with Display Port in and out to the back to support DisplayPort 1.2 STD Transport.

  Thanks for any input.

  I had to remove my VGA HDMI DV card and now the DP (display port) works very well. Don't need to use a HDMI cable. Display Port 1.1 is reported as the problem in order to remove the card solves this problem.

• Under XP, had 2 monitors but now use only 1. The system always acts as the 2nd monitor is here. How to stop this?

  Programs/functions as the system to display on the far-away monitor, do not display on the existing monitor, it is impossible to do the functions. It's as if the system does not realize that the other monitor is not attached.

  in Device Manager you have tried to uninstall the

  removed the monitor?

• HP Recovery Manager doesn't have to check the disc 1 what to do? Help, please

  Hello I have computer laptop hp pavilion notebook pc... g6 but it contains no disk recovery and whenever I have create recoverry Recovery Disk Manager, he did not check the disc 1 and show the message "insert another disc" it happen again and again... Please tell me what to do... i seriouslly want recovery disk

  Hello

  I would contact HP (the telephone number can be found on the corresponding link below) and explain that the Recovery Media Creator is unable to create a viable set of recovery disks and ask that they send you a free replacement of disks together.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Monitor may not turn off after setting the screen turns off after a period of inactivity

  Original title: control screen does not turn off

  My cell phone 6 year old runs today to Win XP Pro and IE7 and Firefox. My screen has been set to turn off after 15 minutes, but these days he keeps any. It stays ON all day.

  Attempted to solve by setting to turn off in 10 minutes, but it makes no difference, what could be the problem?

  TIA

  First of all, you don't want to do the hardware updates through the Microsoft Update Website.

  Secondly, there are a couple ways you can do this:

  1. go in the Device Manager (start > Control Panel > administrative tools > computer management > Device Manager).    tedious, but this way you are sure.

  Double-click each item, having developed each sign, select the driver tab and choose Update driver, let windows search automatically, make sure that you are connected to the internet.  Do this for each item that you want to search for updated drivers.

  2. go in the manufacturer's website. For example, I use a Dell Dimension and move the driver Dell downloads Web site.

  If you mean hardware upgrade from Microsoft (not Windows which is software) you would search Microsoft.com site for driver downloads.

  Hope this helps, after back with your results, please.

• I use my TV as a monitor but I don't see my full screen

  Hey,.

  I have a tv with resolution 1024 x 768, but only 2 available on my new pc resolutions are 1920 x 1080 & 1280 x 720.

  How can I gix I can see full screen on my TV and do not have the invisible bits?

  see you soon

  Hello

   
  What is the brand and model of the computer?
   
  I suggest you try these methods and check.
   
  Method 1:
  Update the video card driver.
  Update a hardware driver that is not working properly.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 2:
  Download the latest display driver on the manufacturer's Web site and install it on your computer.
  Step 1: uninstall display driver.
  a. right click on the computer icon
  b. Select manage from the menu.
  c. Select Device Manager in system tools that are listed in the resulting display.
  d. right-click on the device.
  e. click on the driver tab.
  f. click on uninstall.
  g. restart the computer
  Step 2: Download the latest display driver on the manufacturer's Web site and install it on your computer

• Adobe Application manager not install after many attempts, removing a last, but keep saying the same message.

  Following the instructions, running the application, but nothing happens and repeat the same message that I need to install the new Adobe Application Manager to fix the problem! frustrating!

  Do you use Windows or Mac computer?

  Mac:

  https://forums.Adobe.com/thread/1858724

• I have a 22 inch monitor set to 150%, but since I installed Firefox, the font is too small and the screen is too small. Cannot enlarge font or screen. I can do control ++ whenever I have enter a page but don't want it as my solution.

  Control/display panel, I got my screen set at 150% and a resolution of 1680 X 1050. It filled my screen 22 inch with the content of the page. Now that I have installed Firefox, the police is too small and the content is centered in the screen leaving about3"each side of the space empty. I want to fill the screen and make things bigger. Have not found a way to do it. Firefox tells me in my window/display of the control panel that setting my display at 150%, ' some elements may not match your screen if you choose this setting if your screen is positioned on this resolution. " It worked fine with the Explorer.

  To help other users find solutions, please come back to this Thread and connect you to the

  Forum with your user name and password:

  Click on 'resolved' beside the answer above that BETTER resolved your issue

  DO NOT CLICK on 'Solved It' next to this answer

• My monitor into hibernation against my will. When I open the control panel power options, there are no options to choose from, the drop down menu has nothing. Help please

  Is it possible to restore the options in the Panel have no option of available power

  Hello Braunmab,

  Thank you for your message.  Try to get to you the options of Hibernate that way:
  Right-click on the desktop and select "Properties".
  Select the "Screen Saver" tab > click on "Power Options."
  In this window, you should see options to Hibernate / sleep.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• the monitor can not display any image on the screen. CPU power button is lit orange instead of green.

  Original title: I have absolutely no idea of what is wrong with my Dell Dimension C521 Windows Vista (x 86)

  It is impossible to display an image on the screen. CPU power button is lit orange instead of green.

  See page 47 of the owner's manual

  http://support.Dell.com/support/eDOCS/systems/dimc521/en/OM_EN/RP333A00.PDF

• Satellite Pro L300 - external monitor has a yellow tint to the screen

  I have connected a new external monitor to my Sat Pro L300 and the monitor of the station has a strong tinge of yellow to the display.
  I have tried with other monitors and cables and they do the same screen that is yellow.

  Can anyone suggest what I can do, I tried to change all the color settings, but they don't get rid of the yellow tint.
  Thank you.

  Well, maybe this problem is related to the failure of hardware since will have to show common colors without changing the settings in the color settings in the graphics card Control Panel

  In my opinion this s hardware problem
  However, before I ask a technician for advice I recommend updated the BIOS and reinstall the graphics driver.