I need free cleanser to clean and optimize my pc

Similar Questions

• My laptop always has this "Smart PC Cleaner Performance Monitor" found 2445 message to clean and optimize. Is it safe?

  Is Smart Pc Cleaner safe to use.  My Laptopo is HP and has always shown blue and yellow logo. This logo is gray and yellow.

  Is Smart Pc Cleaner safe to use.

  N° !!! No registry cleaner is safe to use. Remove it from your machine and then...

  Download the free version of this tool. First check the updates and then run a full scan.

  Malwarebytes Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

• Microsoft has a free registry and optimize cleanser

  your kidding does me microsoft have a registry cleaner and optimizer free

  Microsoft does not provide such software. You can try third-party software.

  But it's very risky. These programs tend to damage the registry and in extreme cases even face serious consequences on the material.

  If there is any problem with your registry, you can either mention it here or google out. There are several solutions for each problem.

  If you want to try something then see "ccleaner" its good for optimization

• I need a registery cleaner and so free large or very affordable

  I am very confused that the co. trillion dollar cannot answer a simple question. All I need is information, and the line is dead! Maybe if msn can give me a person who speak that would help. Fred s.

  I am very confused that the co. trillion dollar cannot answer a simple question. All I need is information, and the line is dead! Maybe if msn can give me a person who speak that would help. Fred s.

  You do * not * need a registry cleaner. Needs of a registry cleaner ad Nodbody I highly recommend that you do not use one of them.

  Registry cleaning programs are * all * snake oil. The registry cleaning is not necessary and dangerous. Let alone register and do not use any registry cleaner. Despite what many people think, and what software record cleaning providers are trying to you convince to have used the registry entries is not really make you hurt.

  The risk of a serious problem caused by a registry cleaner by mistake delete an entry you need is much greater than any potential benefit it may have.

  Read http://www.edbott.com/weblog/archives/000643.html

  and http://aumha.net/viewtopic.php?t=28099

  and also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  Let me stress that neither me nor anyone else who warns against the use of registry cleaners has never said that they always cause problems. If they have always caused problems, they would disappear from the market almost immediately. Many people have used a registry cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it the essential * risk * to have a problem. And since there is no advantage to using a registry cleaner, running the risk is a very bad deal.

• Clean, repair and optimize my registry.

  I did a scan a deep scan of registry with Registry Mechanic (PC tools) and discovered 588 registry errors. What should I do to solve this problem and make sure my PC is running at its best. I tried running Registry Mechanic (PC tools), and I have directed to their home page and asked to buy the tool which I did not because of geographical differences (I'm at the Kenya), are so there free tools that will help me to solve this problems? I am currently using windows 7.

  On Wednesday, February 9, 2011 10:32:17 + 0000, AnthonyMute wrote:

  I did a scan a deep scan of registry with Registry Mechanic (PC tools) and discovered 588 registry errors. What should I do to solve this problem and make sure my PC is running at its best. I tried running Registry Mechanic (PC tools), and I have directed to their home page and asked to buy the tool which I did not because of geographical differences (I'm at the Kenya), are so there free tools that will help me to solve this problems? I am currently using windows 7.

  Here's my advice. Ignore what told you Registry Mechanic and get rid
  of this program.

  Registry cleaning programs are all snake oil. Cleaning of the
  registration is not necessary and is dangerous. Let alone register and
  do not use any registry cleaner. Despite what many people think, and
  What software record cleaning suppliers are trying to convince you,
  have unused registry entries is not really make you hurt.
  The risk of a serious problem caused by a registry cleaner by mistake
  delete an entry you need is much greater than any potential benefit
  It can have.
  Read http://www.edbott.com/weblog/archives/000643.html

  and http://aumha.net/viewtopic.php?t=28099

  and also
  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

  Let me stress that neither me nor anyone else who warns the
  use of registry cleaners never said that they always cause
  problems. If they have always caused problems, they would disappear from
  the market almost immediately. Many people have used a registry
  cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it
  the risk of a significant problem. And since there is no
  benefits of using a registry cleaner, running that risk is a very bad
  good deal.

  Ken Blake (MS-MVP)

• How can I restore my system XP to factory settings with on a boot disk? System Restore won't let me back to a date. I need to clean and start over with on a XP boot disk.

  How can I restore my system XP to factory settings with on a boot disk? System Restore won't let me back to a date. I need to clean and start over with on a XP boot disk.

  You will need to go on the manufacturer of your pc and then ask for a windows xp disk and drivers. This will give you a new copy, but not out of the box state. For an out of the box, get a recovery disk. Just answer what you want.

• Need to clean and restore dell to form factor computer

  I need clean and restore my computer laptop studio xps from dell to factory settings and do not know how.  It came with windows vista but I don't know if my kids has changed, I am a computer dummy.  I was hoping that I could go to dell online and press a button, but it does not work.  Also my wireless on the laptop is not working so I have my Linksys working so I can go on the internet.

  Thank you for any assistance.

  I need clean and restore my computer laptop studio xps from dell to factory settings and do not know how.  It came with windows vista but I don't know if my kids has changed, I am a computer dummy.  I was hoping that I could go to dell online and press a button, but it does not work.  Also my wireless on the laptop is not working so I have my Linksys working so I can go on the internet.

  Thank you for any assistance.

  Best advice: contact Dell - they will tell you what you must do in your particular case.

  No matter what - know whatever it is you do not have backup (files, Internet bookmarks, emails, contacts, photos, documents, etc.) will be lost.

  Success may be just a touch at the start.

  Something along these lines: http://support.dell.com/support/topics/global.aspx/support/kcs/document?docid=DSN_336966&isLegacy=true

• I 86.5 free concerts and Vista does not level. He tells me I need 7538 MB to upgrade and I have a lot more free?

  I 86.5 free concerts and Vista does not level. He tells me I need 7538 MB to upgrade and I have a lot more free?

  Hi smkymountains,

  What is you receive the exact error message?

  Step 1: You can follow the steps mentioned in the article below

  Error message when you try to upgrade a computer to Windows Vista: "this computer does not have a sufficient space for temporary files.» Error code 0 x 80070103.

  http://support.Microsoft.com/kb/928232

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a subscription to Cloud, had my computer cleaned and the need to reload applications how to do this, Ive not icons on my computer

  Hello

  Can you help me? I have a subscription to Adobe Cloud. Just having my computer back to be cleaned and now have extra ram. I should be able to charge my programs (indesign, photoshop), but keep in mind in the purchase, when I already have a subscription?

  Is there a simple way to recharge?

  Thank you!

  Roisin

  You can recharge from here https://helpx.adobe.com/creative-cloud/help/download-install-app.html

  Do not forget that two activation are allowed by CC.

  Concerning

  Stéphane

• opening program minimizes and optimizes all the time

  progam start showing some problem of its own.

  progam was started for the first time after starting the computer indicates a sound problem, windows Explorer minimizes and optimizes all the time until he is arrested. Pls suggest a solution for this type of problem.

   
  1 did you do changes on the computer before the show?
  2. you receive an error message?
  3. what version of operating system you are using on the computer?
  
  Method 1:
  You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted
  
  Method 2:
  You can also perform a clean boot and check:
  Windows XP: How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Windows 7 and vista:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   
  Method 3:
  You can also try to run a SFC scan, it will scan and try to correct some of the system files.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• My WMP said that I need to connect a burner and restart the player?

  For long time now Ive been burning cd and just recently my WMP started getting a message saying I needed to connect a burner, and then restart the player. It goes the same for extraction, he said "A CD DRIVE IS NEEDED in order to RUN RIP". I don't know why he started to do this, he has never been a problem before. I have a laptop HP Pavilion with Vista Home Premium. Is there anything I can do to restore or solve my dilemma? Advice or answers would be useful.

  Thank you
  Mike

  Hello

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem. Start at the top and use it as a checklist to the drive works and not jump around like a menu.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  If necessary:

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• What are the files delete to free up my Media and Disk Cache?

  What are the files safely remove old projects to make my Media and Disk Cache? I use Photoshop and first, and when I installed After Effects, I got a message saying I needed free memory in this cache.

  Thank you!

  Hello

  Default location:

  Windows - "C:\Users\User_Name\AppData\Roaming\Adobe\Common".

  Macintosh - ' ~ / library/ApplicationSupport/Adobe/Common '

  Inside this place, you will find 2 files - 1. Media cache and Cache files for multimedia 2.

  If these two folders, trash, it will clear all the previous Cache.

  You can also do this in Premiere Pro, select Preferences/Media/Clean.

  

  Kind regards

  Navdeep Pandey

• Need help with my preparation and suggestion

  I'm looking for new jobs of my existing role. All interviews are I get here is script based and I'm not able to answer most of them and thus be rejected in all cases. . In my work daily I am part of the team of DBA and daily work is to monitor the tablespace, Auditor, audit point mounting important space, for instance health check and backup of surveillance, it becomes boring, day after day, it's why I want to spend. But how to prepare for these typical scenarios based queries, I have both and unique and Dataguard setup in my laptop to play with, but I don't get any idea how to stimulate different scenario that can help me to crack interviews.
  
  Any idea or advice and suggestions will be highly appreciated and will be followed diligently. Thanks in advance.

  Hello

  I hope that... .in real time world... .they expects more from you than what you do now... as a DBA...

  in fact as a DBA, you will need to practice/play on your laptop computer or test environments... many things is to do...

  How to prepare to answer these scenario type of problem and their solutions

  convenient and... practice... practice... practice... practice... practice... practice... practice... practice... practice... practice... practice... practice... various scenarious... on your test computer...

  example: 1st thing is you need to learn oracle architecture and get good knowledge about this... book architecture expert oracle by thomas kyte...
  2:backup and recovery... .every interviewer waiting for information from you in this category... I hope... you need to practice various scenorious on the test computer.
  as some are below... take a full backup of your database before us all. R & D...
  1:datafile loss... system datafile losss... remove from the disk and try to restore/recover the PB... practice using backup bcakup online/offline...
  2 repeat corruption... size of newspaper for modifing do it again...
  (3) controfile corruption / lost
  DataGuard 4) standby log archive lack of sequence as gap next... WRT primary... pause connection N/W try this... practice scenario switch on / switch on scenarious... etc...
  point 5) practice in recovery time...
  Take 6) the practice of the above database hot backup like data lost/corruption...etc file...
  (7) unconsciously table drop... flashback technology...
  RMAN 8)... beauty of oracle... a lot is there to play the test using RMAN...
  Configuration... show all... it will give you a few parameters conf try to read each conf setting if its other than default configuration... If you... backup... restore... any file missing practice/play cmds RMAN... like missing file controfile file missing... etc...
  now, one day each interviewer ask a lot about RMAN...
  (9) make cloning using offline online backup/backup/RMAN

  http://gavinsoorma.com/2010/06/some-more-RMAN-recovery-scenarios/
  http://docs.Oracle.com/CD/B28359_01/backup.111/b28270/rcmintro.htm
  http://docs.Oracle.com/CD/B19306_01/backup.102/b14191.PDF
  Once you got the good knowledge over things... then... the performance optimization analysis statspack report/awr...etc...

  my suggestion is to get the habit of Forum oracle fallow every day... If possible, each Hr... and try to read old messages in the form... problem to reproduce by your free the.experts and fallow solution and document those it will be useful for you made good things ahead for you... the best...

  Thank you
  DBC,
  SR DBA.

  Published by: dbc001 on March 10, 2013 10:36

• Intermittent slowness; should I clean and re-install from scratch?

  I realize that it is a trick question... I have an iMac 2013 that I bought as a referb to Apple a little less than a year before. Right from the beginning I had a lot of performance issues. I finally took it in an Apple authorized service location (they worked on many of my other macs in the past). They discovered a bad internal drive and replaced it. Compared to the original performance issues, he seemed much better (for once).

  Within weeks, I saw a lot of downturns intermittent (lots of rotation beach balls). I brought them and the 'cleaned' and without asking, me improved Yosemite to El Capitan. I was a little annoyed by this movement, but with hindsight, I'm glad that I've updated (because I hate the upgrade - if it ain't broke, don't fix it).

  Fast forward a few months. Things are still sluggish. Usually when you start applications. Once the things up a race, they seem ok. But after the awakening of the machine, it may take time for things to calm down. A lot, a lot of rotation beach balls. Very frustrating for the least and worst of all, it's computer main of my wife and I'm tired of all the complaints... "What is happening?" "Why mouse scroll? "What's taking so long?"

  A bit of history that could enlighten us... I was happily running Snow Leopard on an iMac for many years. One day, he would not display (but seems to be start). The thing being out of warranty, I decided to take the plunge and get a new iMac. It came with Yosemite. I was told that I could transfer all my stuff using a firewire cable connected between 2 macs. I did it. I'm done with many broken apps, that I deleted.

  My question is, if my problems could be related to a bunch of junk on the new mac? I hate to reinstall everything again, but I'm starting to wonder if it would be the best solution. Wipe the hard drive, install the OS, do all the updates, then create my user accounts (my wife and child and me), and then manually reinstall applications (that I still need).  Fortunately, I have a macbook pro that I use, the iMac is less important to me these days. All of my data on external drives, and I have a ton of backups. I was thinking about using Carbon Copy clone to clone internally, so that I can book still off the clone if I need to.

  Any thoughts?  I know this is a long post, but I feel better get out of my chest.

  Thank you

  Please post a report etrecheck in this thread for a more thorough analysis of your system.

  http://etrecheck.com

  Etrecheck is a reporting tool, not fix all the problems, or provide any personal information and is the preferred method to provide information on your system to the majority of the volunteers here who can offer to help you.

• HP Pavilion Notebook - 15-p199: need help with the installation and activation of 10 Windows after completely uninstalling Windows

  Hello HP assistants.

  I need help for a specific problem. My laptop came with an installation of Windows 8.1. Then I upgraded to 10 Windows when it became available. After a while, I decided to uninstall Windows completely (to wipe the hard drive) and install a Linux operating system.

  Now, I decided that I want to use some software that is not available on Linux and if I want to reinstall Windows 10. My problem is that Windows has completely disappeared in a form any. So now, I need to download Windows 10 from an official source (which I think can be done fairly easily from the official source of Microsoft, although if there is a better, HP official medium to do this then please recommend it) and then I need to activate Windows some how.

  As has been made clear, I have the right to use Windows 8.1 and 10 but I would need to download Windows 10 and turn it on. Is there a way to do this? I'm literally stuck without solution.

  Thanks in advance.

  Hello

  As long as the previous installation of Windows 10 had activated Ok after upgrade from 8.1, you can simply perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K