I need help interpreting minidump Win7

Similar Questions

• Need help with installing Win7 on Satellite L70-A-12W

  I bought Satellite L70-A-12W with preinstalled victory 8.1 two days ago... I have no recovery of win7, but I have Win7 64 Bit DVD new.
  I would like to install win 7. I follow the instructions concerning the closing down, on Bios (I have version 1.3) safety boot is disabled and the boot mode is MSC mode.

  I did a recovery on USB media if something with is wrong. Earn 8.1 I installed Paragon Partition Manager 14 (free version) and see the Partition Table. It UriPattern like this:
  1 partition - system - 1-GB NTFS (Partition of Service);
  2. partition (no name) - 100 MB - it's the gray color.
  3 partition (local partition) - 128 MB;
  4 partition C: (win 8.1) - Go 920 - NTFS drive.
  5. partition - recovery - 10.1 GB - NTFS (Partition OEM Service).

  I would like to keep evrything what is, if possible, and instead og Win8.1 install Win 7 ultimate 64-bit (which I have). And after than that, resize this partition of 100 GB and make a second partition private for my data - partition D: - for example.

  I did things in the BIOS and win7 DVD and got error massage: Windows cannot be installed to this disk. The selected disk is of the GPT Style partition...

  I found a solution to clean the disc in the BACK, but I'm not sure that I have with this procedure will delete oll data disc. I'll guarantee loos e if I do this... If all other partitions will remain instead of C--> I can always make backup returns with media recovery with win 8.1 and hopes to keep the warranty.

  Now, I don't know what I have to do...

  I would just have win 7 on my laptop with minimal change to the partition table and all the partitions instead of C (where now is win 8.1).

  Could you please help me...

  Hello

  The question is: why you want to keep the present partitions on the HARD disk.
  Using two systems Win 8 and Win 7 on this laptop?

  The fact is that if you want to use only Windows 7, it s not appropriate to keep the old partitions on the HARD disk.

  Secondly, you already have the Toshiba Recovery flash memory stick.
  This recovery media allows you to return to the factory settings.

  This means that recover the laptop using this memory flash USB stick recovery would again create the same partitions and install the Win 8.1 System.

  Finally and above all Windows 7 supports 4 primary partitions as primary partitions are applicable to the tables of partition MBR and partition table MBR allow four primary partitions.

  After you create the primary partition 4th Windows system will accept only the volumes 'Dynamics' (logical drives). You must create an extended partition containing many logical partitions.

  However, if you use a table of GPT partition that is supported by the 64-bit Windows versions, you can configure up to 128 partitions and you need t differ between "primary" and "extended" partitions

  In addition, the GPT partition table also requires the UEFI BIOS.

  More details here:
  http://support.Microsoft.com/kb/2581408

• Need help to install Win7 on Satellite CL10-b-103

  Good afternoon mate,

  I come to you because I gave this mini laptop, Toshiba CL10-b-103, who doesn't have a DVD drive and only 32 GB HDD (which there are only 21 free for the issue of the hidden restore and partition)

  My intention is to install a win7 sp1 to make it lighter and have more space on the HARD drive.

  And I'm going crazy,

  The bios is quite simple, you can turn off only an option that says 'safe start' (which in some forum in English is advised to try to defuse what I do).

  And change the boot priority (leaving only USB and HDD / SDD). Nothing comes of the CSM or something, who has also read by some forum also had to turn it off.

  I'm first, I put usb firstly you have to shoot the laptop and there is no way to read a usb win7.

  I do an install of win7 usb bootable with the support of the EFI (apparently these new EFI this notebook, according to lei, you must prepare them in a special way) as a result of this blog:

  http: //biglimesoftwa...dows-7-u-8.html

  And no, do not read! There is no way that between usb!

  I also did a USB bootable, following another forum, with an application called Rufus, but nothing not even read.

  How the companions? I'm doing something wrong?

  Is it possible that the laptop is, is totally gelding to format and install another OS?

  See if you can help me, I'm desperate...

  Thanks in advance and greetings from Spain,

  Update:

  I used the WinSetupFromUSB and make it bootable USB with this utility, I managed to read the USB, but all of a sudden comes this screen:

  

  Exactly the same problem (Toshiba CL10-b-103 too), but I went deeper in the research and found that the BIOS version of this laptop does not support UEFI/CMS. Updated my BIOS to the latest version (which is for the moment, the 5.00 08/07/15 - WIN) but still does not work. I was already angry with their fu * skate that brings me to kill the process "pad experience" every time you start.

  I would like to install ubuntu, but nothing works, even with a USB cable or directly on the C drive (note that I ruined my USB while flashing it, but in any case it was my fault). Any advice, tips?

  In the case where someone would say "boot option is in the Advanced tab' this isn't for me, regarding the kikeastur. Sorry for digging it up with this topic, but I do not see why I would create a new that I have exactly the same problem.

  Thanks in advance

• CS Apps do not start correctly. Need help interpreting the logs

  Hello

  I have a problem running CC Apps on a Windows System. Shortly after starting work stops App (in this case, InDesign) and the process is set to inactive in the Task Manager. I have gatherd log files and it would be nice if someone could help me solve this problem.

  http://pastebin.com/crpzc8p3 adobegc.txt

  http://pastebin.com/dgY5P7Tv PDApp.txt

  AMT3.txt is too large for pastebins self-service (753KB). someone at - it a suggestion how I can provide the amt3 log file?

  Thanks in advance!

  Hello

  This link can help you troubleshoot Creative Cloud apps install and uninstall errors

  If your problem remains the best way to send your log file is to contact us either through the Support tab under the table edge Enterprise or through this link https://helpx.adobe.com/contact.html

• Dialog Windows Activation Technologies is not running Genuine Windows on 3 years for laptop from Lenovo. need help interpretting the MGADiag.exe output

  The error began this week, with no know recent changes.  What's wrong?

  Diagnostic report (1.9.0027.0):

  -----------------------------------------

  Validation of Windows data-->

  Validation code: 0x8004FE21

  Code of Validation caching online: 0x0

  Windows product key: *-* - JKHXW - D9W83-FJQKD

  Windows Product Key hash: AYaBykmfTHUVW5whGaYMeVJn0/U =

  Windows product ID: 00359-OEM-8992687-00249

  Windows product ID type: 2

  Windows license Type: OEM SLP

  The Windows OS version: 6.1.7601.2.00010300.1.0.003

  ID: {A36F4D40-2275-479B-8F82-B3760CA253EC} (1)

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Product name: Windows 7 Home Premium

  Architecture: 0 x 00000009

  Build lab: 7601.win7sp1_gdr.120830 - 0333

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  OGAExec.exe signed by: n/a, hr = 0 x 80070002

  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->

  Office status: 109 n/a

  OGA Version: N/a, 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Office Diagnostics: B4D0AA8B-604-645_B4D0AA8B-604-645_B4D0AA8B-604-645_B4D0AA8B-604-645_B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->

  Proxy settings: N/A

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)

  Default browser: C:\Users\Craig\AppData\Local\Google\Chrome\Application\chrome.exe

  Download signed ActiveX controls: fast

  Download unsigned ActiveX controls: disabled

  Run ActiveX controls and plug-ins: allowed

  Initialize and script ActiveX controls not marked as safe: disabled

  Allow the Internet Explorer Webbrowser control scripts: disabled

  Active scripting: allowed

  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  [File mismatch: C:\windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003

  [File mismatch: C:\windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003

  [File mismatch: C:\windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003

  [File mismatch: C:\windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100

  [File mismatch: C:\windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100

  [File mismatch: C:\windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003

  [File mismatch: C:\windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100

  [File mismatch: C:\windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100

  [File mismatch: C:\windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003

  [File mismatch: C:\windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003

  [File mismatch: C:\windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100

  [File mismatch: C:\windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100

  [File mismatch: C:\windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003

  [File mismatch: C:\windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003

  [File mismatch: C:\windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003

  [File mismatch: C:\windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100

  [File mismatch: C:\windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->

  Office details: {A36F4D40-2275-479B-8F82-B3760CA253EC}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-FJQKD00359-OEM-8992687-002492S-1-5-21-3265146876-3904772438-1703110712LENOVO3241 LENOVO1ECN18WW (V1.04)20090929000000.000000 + 000F6B63707018400FE04090409Central Standard Time(GMT-06:00)03LENOVOOC-01 109

  Content Spsys.log: 0 x 80070002

  License data-->

  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition

  Description: operating system Windows - Windows (r) 7, channel OEM_SLP

  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64

  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f

  Extended PID: 00359-00178-926-800249-02-1033-7601.0000-0732013

  Installation ID: 002586636201877424969954983904297076137033838504066464

  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338

  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339

  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341

  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340

  Partial product key: FJQKD

  License status: licensed

  Remaining Windows rearm count: 2

  Trust time: 17/03/2013-08:44:36

  Windows Activation Technologies-->

  HrOffline: 0x8004FE21

  HrOnline: n/a

  Beyond: 0x000000000001EFF0

  Event timestamp: 3:10:2013 21:21

  ActiveX: Registered, Version: 7.1.7600.16395

  The admin service: recorded, Version: 7.1.7600.16395

  Output beyond bitmask:

  Altered the file: %systemroot%\system32\sppobjs.dll

  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui

  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui

  Altered the file: %systemroot%\system32\sppwinob.dll

  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui

  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui

  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui

  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM

  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui

  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui

  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui

  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data

  Current HWID hash: MAAAAAEAAQABAAEAAAACAAAAAwABAAEA6GEsUi7D4lfABQTXyiyaygwcxCwaDXZW

  Activation 1.0 data OEM-->

  N/A

  Activation 2.0 data OEM-->

  BIOS valid for OA 2.0: Yes

  Windows marker version: 0 x 20001

  OEMID and OEMTableID consistent: Yes

  BIOS information:

  ACPI Table name OEMID value OEMTableID value

  APIC INTEL Calpella

  FACP                                    LENOVO                   CB-01

  HPET                                    LENOVO                   CB-01

  BOOT INTEL Calpella

  MCFG LENOVO OC-01

  LAURENCE INTEL CP_FIELD

  ASF!                         INTEL Calpella

  SLIC LENOVO OC-01

  SSDT PmRef CpuPm

  SSDT PmRef CpuPm

  SSDT PmRef CpuPm

  The common cause for these mismatches is a defective Intel Rapid Storage Tech driver

  Download and install the latest version of...

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=21730

  you want this one: iata_enu.exe

  Restart then run another MGADiag report and view the results.

• I need help with an installation failure to interpret and troubleshoot a Setup log.

  Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

  Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

  According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

  Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

  https://discussions.Apple.com/message/26309669#26309669

  I used this method with success to install FCS2 in Yosemite:

  

  [click on images to enlarge]

  However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

  

  

  First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

  Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

  

  If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

  It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

  Here is the post on MacRumors with pre-installed Setup log:

  http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

• Need help with the IP configuration on vm ware for the installation of 11 GR 2 on linux vmware 6 on win7

  Need help with the ip configuration on/etc/hosts for the installation of 11 GR 2 on linux vmware 6 on win7.

  Let me know if you need more info... in fact I have a setting error while installation said

  -(/ etc/hosts has no correct entry for the host name)

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Thank you...

  (host computer)

  Win7 64 bit

  (vmware)

  Oracle Linux Server 6.3 version

  Release of Red Hat Enterprise Linux Server 6.3 (Santiago)

  Oracle Linux Server 6.3 version

  -(/ etc/hosts has no correct entry for the host name)

  Then post your/etc/hosts.

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Why 85? have you tried 192.168.1.100?

• Need help in the interpretation of a file of Trace 10053

  Hello
  
  I need help to interpret an event 10053 (optimizer Trace) trace file
  
  Everything that happens on AIX with Oracle 11.2.0.2
  
  It is not obvious to me why the optimizer chooses the path with the highest cost.
  But I found the following quote in the trace file, which is probably the answer, but I did not understand what circumstances allow the optimizer to say such things:
  
  
  New AP rejected: guess used for New, but not for the current best
  
  So, it was the short story, now the witch for a long time one quote of the trace file
  
  Here the query directly in the trace file. I can't modify this query, even a hint is not feasible, so I need to understand the incorrect path to avoid it.
  

  **************************
  Automatic degree of parallelism (ADOP)
  **************************
  Automatic degree of parallelism is disabled: Parameter.
  
  PM: Considering predicate move-around in query block SEL$1 (#0)
  **************************
  Predicate Move-Around (PM)
  **************************
  OPTIMIZER INFORMATION
  
  ******************************************
  ----- Current SQL Statement for this session (sql_id=0zdbb3hzztdaf) -----
  explain plan for
  SELECT
    aktl_aend,
    aktl_akgrnr,
    aktl_akgrpos,
    aktl_akh,
    aktl_alterart,
    aktl_anz_in,
    aktl_anz_nach,
    aktl_artrab,
    aktl_beg,
    aktl_belart1,
    aktl_belart2,
    aktl_belnr1,
    aktl_belnr2,
    aktl_bestkz,
    aktl_bestmg1,
    aktl_bestmg1_alt,
    aktl_bestmg2,
    aktl_bestmg2_alt,
    aktl_eindat,
    aktl_ek,
    aktl_ekdat1,
    aktl_ekdat2,
    aktl_ekkopie,
    aktl_ekn,
    aktl_eknorm,
    aktl_ek_alt,
    aktl_end,
    aktl_fbdarst,
    aktl_fbd_alt,
    aktl_fbseite,
    aktl_fbs_alt,
    aktl_fbtxt,
    aktl_info_werbeabt,
    aktl_info_wgm,
    aktl_kaek,
    aktl_kaekn,
    aktl_kaek_alt,
    aktl_kombiart,
    aktl_ldat1,
    aktl_ldat2,
    aktl_lf,
    aktl_lf_alt,
    aktl_mgfk,
    aktl_mg_p,
    aktl_mg_r,
    aktl_mindmg,
    aktl_neudat,
    aktl_nnek,
    aktl_nnekn,
    aktl_pabw,
    aktl_pic,
    aktl_plan_menge,
    aktl_plan_menge_hela,
    aktl_plan_stueck,
    aktl_plan_stueck_hela,
    aktl_plan_woche,
    aktl_plan_woche_hela,
    aktl_rdat,
    aktl_ro_p,
    aktl_ro_r,
    aktl_seite,
    aktl_sigkz,
    aktl_sokoeur,
    aktl_sokoeur_alt,
    aktl_sokopr,
    aktl_sokopr_alt,
    aktl_sort_vorab,
    aktl_stat,
    aktl_text,
    aktl_txtbau,
    aktl_txtbaukz,
    aktl_um_p,
    aktl_um_r,
    aktl_user,
    aktl_vk,
    aktl_vkn,
    aktl_vk_alt,
    aktl_zen,
    akt_at_at_no,
    akt_at_at_se_se_ag_ag_no,
    akt_at_at_se_se_ag_ag_wg,
    akt_at_at_se_se_no,
    ROWID,
    rownum,
    uid,
    USER,
    vid
  FROM
    akt
  WHERE
    (
      aktl_stat <> :"SYS_B_0"
    )
  AND
    (
      aktl_zen = :"SYS_B_1"
    )
  AND
    (
      aktl_akh BETWEEN :"SYS_B_2" AND :"SYS_B_3"
    AND
      (
        (
          akt_at_at_se_se_ag_ag_wg   = :"SYS_B_4"
        AND akt_at_at_se_se_ag_ag_no = :"SYS_B_5"
        )
      )
    )
  ORDER BY
    akt_at_at_se_se_ag_ag_wg ASC,
    akt_at_at_se_se_ag_ag_no ASC,
    aktl_akh ASC,
    aktl_akgrnr ASC,
    aktl_akgrpos ASC,
    aktl_kombiart ASC,
    akt_at_at_se_se_no ASC,
    akt_at_at_no ASC
  *******************************************

  And here's the strange part.
  As far as I know, in this quotation that the optimizer realizes, that there is a better path than the AKT_INDEX, but he ignores it.
  

  ***************************************
  BASE STATISTICAL INFORMATION
  ***********************
  Table Stats::
    Table: AKT  Alias: AKT
      #Rows: 14006583  #Blks:  477882  AvgRowLen:  281.00  ChainCnt:  570341.00
  Index Stats::
    Index: AKTL_UMNUM  Col#: 44
      LVLS: 2  #LB: 60137  #DK: 64171  LB/K: 1.00  DB/K: 179.00  CLUF: 11535830.00
    Index: AKT_INDEX  Col#: 2 3 4 5 1 6
      LVLS: 3  #LB: 83897  #DK: 13955093  LB/K: 1.00  DB/K: 1.00  CLUF: 11889950.00
    Index: AKT_INDEX010  Col#: 54 56
      LVLS: 2  #LB: 37453  #DK: 392568  LB/K: 1.00  DB/K: 5.00  CLUF: 1127943.00
    Index: AKT_INDEX011  Col#: 55 57
      LVLS: 2  #LB: 33967  #DK: 2102  LB/K: 65.00  DB/K: 869.00  CLUF: 449507.00
    Index: AKT_INDEX012  Col#: 2 3 4 5 6
      LVLS: 2  #LB: 66503  #DK: 2506277  LB/K: 1.00  DB/K: 5.00  CLUF: 13420693.00
    Index: FK_AKH_AKTL_AKH  Col#: 1 6
      LVLS: 2  #LB: 35870  #DK: 184651  LB/K: 1.00  DB/K: 6.00  CLUF: 1131183.00
    Index: KEY_AKT  Col#: 1 2 3 4 5 6
      LVLS: 2  #LB: 82467  #DK: 13793510  LB/K: 1.00  DB/K: 1.00  CLUF: 11691370.00
  Access path analysis for AKT
  ***************************************
  SINGLE TABLE ACCESS PATH 
    Single Table Cardinality Estimation for AKT[AKT] 
    Column (#6): 
      NewDensity:0.000000, OldDensity:0.000000 BktCnt:4202816, PopBktCnt:4202810, PopValCnt:133, NDV:139
    Column (#6): AKTL_ZEN(
      AvgLen: 4 NDV: 139 Nulls: 0 Density: 0.000000 Min: 1 Max: 61044
      Histogram: Freq  #Bkts: 139  UncompBkts: 4202816  EndPtVals: 139
    Column (#2): 
      NewDensity:0.129575, OldDensity:0.000000 BktCnt:4201875, PopBktCnt:4201875, PopValCnt:2, NDV:2
    Column (#2): AKT_AT_AT_SE_SE_AG_AG_WG(
      AvgLen: 3 NDV: 2 Nulls: 0 Density: 0.129575 Min: 6 Max: 7
      Histogram: Freq  #Bkts: 2  UncompBkts: 4201875  EndPtVals: 2
    Column (#3): 
      NewDensity:0.000000, OldDensity:0.000000 BktCnt:4197711, PopBktCnt:4197711, PopValCnt:52, NDV:52
    Column (#3): AKT_AT_AT_SE_SE_AG_AG_NO(
      AvgLen: 3 NDV: 52 Nulls: 0 Density: 0.000000 Min: 6 Max: 99
      Histogram: Freq  #Bkts: 52  UncompBkts: 4197711  EndPtVals: 52
    Column (#85): SYS_STUF1FT2E0X6B6C$__BGEZQRHS(
      AvgLen: 12 NDV: 5571 Nulls: 0 Density: 0.000180 Min: 2117233 Max: 9997926970
    Column (#84): 
      NewDensity:0.000000, OldDensity:0.000000 BktCnt:4201269, PopBktCnt:4201265, PopValCnt:71, NDV:75
    Column (#84): SYS_STULHCKPI#FOQE1JMOOXNGSFB0(
      AvgLen: 12 NDV: 75 Nulls: 0 Density: 0.000000 Min: 157628517 Max: 9982459671
      Histogram: Freq  #Bkts: 75  UncompBkts: 4201269  EndPtVals: 75
    Column (#4): 
      NewDensity:0.000001, OldDensity:0.000000 BktCnt:4201338, PopBktCnt:4201338, PopValCnt:69, NDV:69
    Column (#4): AKT_AT_AT_SE_SE_NO(
      AvgLen: 3 NDV: 69 Nulls: 0 Density: 0.000001 Min: 1 Max: 98
      Histogram: Freq  #Bkts: 69  UncompBkts: 4201338  EndPtVals: 69
    Column (#5): AKT_AT_AT_NO(
      AvgLen: 4 NDV: 7466 Nulls: 0 Density: 0.000134 Min: 1 Max: 9964
    Column (#1): AKTL_AKH(
      AvgLen: 5 NDV: 16307 Nulls: 0 Density: 0.000061 Min: 14 Max: 543136
    Column (#55): 
      NewDensity:0.000001, OldDensity:0.000000 BktCnt:4203610, PopBktCnt:4203610, PopValCnt:5, NDV:5
    Column (#55): AKTL_BELART2(
      AvgLen: 3 NDV: 5 Nulls: 0 Density: 0.000001
      Histogram: Freq  #Bkts: 5  UncompBkts: 4203610  EndPtVals: 5
    Column (#57): 
      NewDensity:0.000002, OldDensity:0.000001 BktCnt:254, PopBktCnt:253, PopValCnt:1, NDV:2102
    Column (#57): AKTL_BELNR2(
      AvgLen: 3 NDV: 2102 Nulls: 0 Density: 0.000002 Min: 0 Max: 9902670
      Histogram: HtBal  #Bkts: 254  UncompBkts: 254  EndPtVals: 2
    Column (#54): 
      NewDensity:0.000088, OldDensity:0.000000 BktCnt:4204429, PopBktCnt:4204429, PopValCnt:6, NDV:6
    Column (#54): AKTL_BELART1(
      AvgLen: 3 NDV: 6 Nulls: 0 Density: 0.000088
      Histogram: Freq  #Bkts: 6  UncompBkts: 4204429  EndPtVals: 6
    Column (#56): 
      NewDensity:0.000000, OldDensity:0.000001 BktCnt:254, PopBktCnt:223, PopValCnt:1, NDV:392568
    Column (#56): AKTL_BELNR1(
      AvgLen: 3 NDV: 392568 Nulls: 0 Density: 0.000000 Min: 0 Max: 9904026
      Histogram: HtBal  #Bkts: 254  UncompBkts: 254  EndPtVals: 32
    ColGroup (#5, Index) AKT_INDEX
      Col#: 1 2 3 4 5 6    CorStregth: 8702149.74
    ColGroup (#3, Index) AKT_INDEX012
      Col#: 2 3 4 5 6    CorStregth: 2971.37
    ColGroup (#1, VC) SYS_STUF1FT2E0X6B6C$__BGEZQRHS
      Col#: 2 3 6    CorStregth: 2.59
    ColGroup (#4, Index) FK_AKH_AKTL_AKH
      Col#: 1 6    CorStregth: 12.28
    ColGroup (#7, Index) AKT_INDEX010
      Col#: 54 56    CorStregth: 6.00
    ColGroup (#6, Index) AKT_INDEX011
      Col#: 55 57    CorStregth: 5.00
    ColGroup (#2, VC) SYS_STULHCKPI#FOQE1JMOOXNGSFB0
      Col#: 2 3    CorStregth: 1.39
    ColGroup Usage:: PredCnt: 3  Matches Full: #2  Partial:  Sel: 0.0133
    Column (#34): 
      NewDensity:0.000000, OldDensity:0.000000 BktCnt:4199313, PopBktCnt:4199311, PopValCnt:9, NDV:11
    Column (#34): AKTL_STAT(
      AvgLen: 2 NDV: 11 Nulls: 0 Density: 0.000000
      Histogram: Freq  #Bkts: 11  UncompBkts: 4199313  EndPtVals: 11
    Table: AKT  Alias: AKT
      Card: Original: 14006583.000000  Rounded: 3  Computed: 3.05  Non Adjusted: 3.05
    Access Path: TableScan
      Cost:  131075.91  Resp: 131075.91  Degree: 0
        Cost_io: 129428.00  Cost_cpu: 16864951683
        Resp_io: 129428.00  Resp_cpu: 16864951683
  kkofmx: index filter:"AKT"."AKTL_ZEN"=TO_NUMBER(:B1)
  
  kkofmx: index filter:"AKT"."AKTL_AKH">=TO_NUMBER(:B1)
  
  kkofmx: index filter:"AKT"."AKTL_AKH"<=TO_NUMBER(:B1)
  
  kkofmx: index filter:"AKT"."AKTL_ZEN"=TO_NUMBER(:B1)
  
  kkofmx: index filter:"AKT"."AKTL_ZEN"=TO_NUMBER(:B1)
  
  kkofmx: index filter:"AKT"."AKTL_ZEN"=TO_NUMBER(:B1)
  
  kkofmx: index filter:"AKT"."AKT_AT_AT_SE_SE_AG_AG_WG"=TO_NUMBER(:B1)
  
  kkofmx: index filter:"AKT"."AKT_AT_AT_SE_SE_AG_AG_NO"=TO_NUMBER(:B1)
  
    ColGroup Usage:: PredCnt: 2  Matches Full: #2  Partial:  Sel: 0.0133
    ColGroup Usage:: PredCnt: 3  Matches Full: #2  Partial:  Sel: 0.0133
    ColGroup Usage:: PredCnt: 3  Matches Full: #2  Partial:  Sel: 0.0133
    Access Path: index (RangeScan)
      Index: AKT_INDEX
      resc_io: 1128.00  resc_cpu: 45259416
      ix_sel: 0.013333  ix_sel_with_filters: 0.000000 
   ***** Logdef predicate Adjustment ****** 
   Final IO cst 0.00 , CPU cst 150.00
   ***** End Logdef Adjustment ****** 
   ***** Logdef predicate Adjustment ****** 
   Final IO cst 0.00 , CPU cst 151.08
   ***** End Logdef Adjustment ****** 
   ***** Logdef predicate Adjustment ****** 
   Final IO cst 0.00 , CPU cst 151.13
   ***** End Logdef Adjustment ****** 
      Cost: 567.59  Resp: 567.59  Degree: 1
    ColGroup Usage:: PredCnt: 2  Matches Full: #2  Partial:  Sel: 0.0133
    ColGroup Usage:: PredCnt: 3  Matches Full: #2  Partial:  Sel: 0.0133
    ColGroup Usage:: PredCnt: 3  Matches Full: #2  Partial:  Sel: 0.0133
    Access Path: index (skip-scan)
      SS sel: 0.000096  ANDV (#skips): 7466.000000
      SS io: 7466.000000 vs. index scan io: 887.000000
      Skip Scan rejected
    Access Path: index (RangeScan)
      Index: AKT_INDEX012
      resc_io: 2177.00  resc_cpu: 54677577
      ix_sel: 0.013333  ix_sel_with_filters: 0.000096 
   ***** Logdef predicate Adjustment ****** 
   Final IO cst 0.00 , CPU cst 150.00
   ***** End Logdef Adjustment ****** 
      Cost: 1092.54  Resp: 1092.54  Degree: 1
  
  
    Access Path: index (RangeScan)
      Index: FK_AKH_AKTL_AKH
      resc_io: 201.00  resc_cpu: 15070140
      ix_sel: 0.004500  ix_sel_with_filters: 0.000032 
      Cost: 101.24  Resp: 101.24  Degree: 1
  New AP rejected: guess used for New but not for Current Best
    ColGroup Usage:: PredCnt: 3  Matches Full: #2  Partial:  Sel: 0.0133
    ColGroup Usage:: PredCnt: 3  Matches Full: #2  Partial:  Sel: 0.0133
    Access Path: index (RangeScan)
      Index: KEY_AKT
      resc_io: 380.00  resc_cpu: 15131385
      ix_sel: 0.004500  ix_sel_with_filters: 0.000000 
   ***** Logdef predicate Adjustment ****** 
   Final IO cst 0.00 , CPU cst 150.00
   ***** End Logdef Adjustment ****** 
      Cost: 191.20  Resp: 191.20  Degree: 1
  New AP rejected: guess used for New but not for Current Best
    ****** trying bitmap/domain indexes ******
  
  
    Access Path: index (IndexOnly)
      Index: FK_AKH_AKTL_AKH
      resc_io: 164.00  resc_cpu: 13914716
      ix_sel: 0.004500  ix_sel_with_filters: 0.000032 
      Cost: 82.68  Resp: 82.68  Degree: 0
      SORT ressource         Sort statistics
        Sort width:         612 Area size:     1048576 Max Area size:   107366400
        Degree:               1
        Blocks to Sort: 1 Row size:     21 Total Rows:            252
        Initial runs:   1 Merge passes:  0 IO Cost / pass:          0
        Total IO sort cost: 0      Total CPU sort cost: 10324700
        Total Temp space used: 0
    ColGroup Usage:: PredCnt: 2  Matches Full: #2  Partial:  Sel: 0.0133
    ColGroup Usage:: PredCnt: 2  Matches Full: #2  Partial:  Sel: 0.0133
    ColGroup Usage:: PredCnt: 2  Matches Full: #2  Partial:  Sel: 0.0133
    Access Path: index (IndexOnly)
      Index: AKT_INDEX
      resc_io: 1122.00  resc_cpu: 45203856
      ix_sel: 0.013333  ix_sel_with_filters: 0.013333 
      Cost: 563.21  Resp: 563.21  Degree: 0
      SORT ressource         Sort statistics
        Sort width:         612 Area size:     1048576 Max Area size:   107366400
        Degree:               1
        Blocks to Sort: 481 Row size:     21 Total Rows:         186754
        Initial runs:   2 Merge passes:  1 IO Cost / pass:        262
        Total IO sort cost: 743      Total CPU sort cost: 169417045
        Total Temp space used: 3015000
    Bitmap nodes:
      Used FK_AKH_AKTL_AKH
        Cost = 83.692016, sel = 0.000018
      Not used AKT_INDEX
        Cost = 1940.139796, sel = 0.013333
    ****** finished trying bitmap/domain indexes ******
    Best:: AccessPath: IndexRange
    Index: AKT_INDEX
           Cost: 567.59  Degree: 1  Resp: 567.59  Card: 3.05  Bytes: 0
  
  ***************************************

  So my question, of course, why not make the path through FK_AKH_AKTL_AKH?
  
  THX in advance
  
  Joerg
  
  Published by: Joerg on September 23, 2011 17:05

  The bind variable you made are non-peekable, because the example you did evidence "explain plan" - which means that the optimizer uses is standard figures assumed that for "between: bind1 and: bind2 ', on the other hand, as predicates" column =: channels3 "can legally be estimated according to the density of the column.

  This means that you probably searching for the case described in a blog post that I wrote some time ago:
  http://jonathanlewis.WordPress.com/2010/09/07/CBO-surprise-3/

  Concerning
  Jonathan Lewis

• Need help with flash player using w/Win7

  OK, here we go. I have - Windows 7 Home Premium 6.1.7601 running service pack 1

  Type of system: x 64-based pc

  Windows Internet Explorer 9 (update version RC) 256-bit

  I use to be able to watch videos on youtube ect. But now flash player does not work. What is the problem? I have Adobe flash player 10 activex and installed shockwave player 11.5 and still it asks me to update my flash player. Need help.

  Hi, thanks. This "Perfect Optimizer" which was found and removed, McAfee did remove or MBAM?

  Is the trial version of MBAM, the free version which is a stand alone, which is run from your desktop or a version installed?

  You see the animation of the Flash Player logo and what version of Flash Player is available on the following site?

  http://www.Adobe.com/software/Flash/about/

  Then check on this Shockwave Flash object in your addons that I mentioned before.

  I want to ensure that a certain number of things and then have another procedure for you and explain once I get an answer from you on the above.

  Thank you

  eidnolb

• I need drivers to install Win7 64 bit on mSATA SSD

  Hello!

  I need drivers to install WIN7 x 64 on THNSNH256GMCT mSATA SSD

  Serial number on my product is 23NS10BFTABY

  Thank you!

  This serial number does not help much. It will be better if you can display the name of the exact model laptop and the model number.

  Anyway, visit Toshiba support and download page for your country and if your laptop model is supported for Win7 64 bit, you should be able to find all of the necessary drivers, tools and utilities.

• Blu error screen! STOP 0X000000F4. Need help.

  Hello.

  I have this laptop with win 7 installed. It worked fine, until I did an o procceses with cleaning TuneUp2009. (I do regularly each month and it is ok) but now after tuneup2009 restarted my pc, start it shows this stop error message. STOP 0X000000F4.  I tried the mode safe but is impossible access, the same error code. I tried to format my pc with a disc of win7, but always without success, it seems that the pc does not boot from the cd room (I changed on the bios Setup boot order).

  And now need help

  Thank you.

  Hello.

  At has first of all thanks a lot for your help.

  I solved my problem in this way.

  I removed my hard drive to laptop, took all the documents I did not wont to lose and formatted it from another pc.

  I downloaded the first file its ( http://www.w7forums.com/threads/official-windows-7-sp1-iso-image-downloads.12325/ )

  and created an installer of the USB bootable Windows 7 on my drive with this tool ( http://download.cnet.com/Windows-7-USB-DVD-Download-Tool/3000-18513_4-10972600.html?tag=mncol;1 ) usd

  I have insterted my hard drive and my lap top when I started upward, I boot it form my USB stick and istalled win 7.

  Now it works very well. Just reinstall my programs.

  Thanks for your help once again.

• Help interpret the VeriStand crash report

  If VeriStand 2014 is left on for a few days, he will break eventually. I run VeriStand on other test systems and very stable. On this basis, I am sure that the accident is related to a unique piece of code (custom, device model, etc.) or the installer for VeriStand on this test bench.

  The error log is attached. I need help to interpret the error log to refine the question. Normally I would remove just a piece of code, and let it run to see if it crashes, but this project is big enough, it would take some time to solve the problems in this method.

  Through the error log, I found this message, but I do not really understand how to solve this problem.

  C:\Users\Public\Documents\National Instruments\NI 2014\Custom Devices\NHR Power Module Rack\Data\NHRDCPowerModule.dll VeriStand

  ExtFuncDWarnOnCorruption: connectorTDR is
  TDR (1/2): @0 x 0000: 'NHRDCPowerModule_ReadArray': 8
  @0 x 0000: 'return type:
  @0 x 0004: "Vi":
  @0 x 0008: 'MeasurementsBufferSize ':
  @0x000C: 'Measures': [V0]
  @0 x 0000: ":
  @0 x 0010: "method":
  @0 x 0014: ' ValBuff
  TDR (2/2): erSize':
  @0 x 0018: "Val": [V0]
  @0 x 0000: ":
  @0x001C: ":
  @0 x 0000: 'ValActualSize ':

  Little background for this project:

  VeriStand deploys on windows for NH Reseach Power Supply target and she deploys on cRIO9081 with 9144 chassis EtherCAT. The project contains multiple models and custom devices.

  

  This type of report should be sent to support NEITHER.

  They could provide a solution to this, or at least be aware of this problem.

• I have 2 problems-how can I activate my Add ons and how to uninstall Windows Anti Virus. I need help, please.

  I have Windows XP 32-bit with IE8 Add ons.  I mainly use Firefox Mozilla for my browser and Yahoo as my home page.  Anyway, I have tried all the support and help guide and technicians told me to do to get add ons to open and activate but in vain.  This computer was given to me as a profession, and it was used in a Bank, so I think that the system administrator has disabled the add ons.  I myself as an administrator and use the tips and tricks given windows and Microsoft, but I always run up a wall.  I need help, please.
  I also need to know how to uninstall Windows antivirus software.  I can't find anywhere on my computer.  I feel really stupid and he is probably right in front of my face, but I can't find it to uninstall.  I have McAfee that I paid dearly for if I want to use it until it expires.

  This "Microsoft antivirus' witness (AKA Trojan W32/FakeAlert) hijackware infection!

  If you manage to somehow move to Win7, you will always have an infected computer.

  The ONLY way to solve the problem is by formatting the current hard drive and do a clean installation of Windows, whether it is WinXP or Win7.

  The ONLY way you can do a clean install of Windows XP if you have disks that came with the computer or if by chance, there is a hidden partition restore (not to be confused with the system restore).

  If your kids er - well & their spouses are going to spend money on a new HARD drive, they'be be better spend on a low-end Windows 7 computer and brand-new (for example, a netbook or a mini).

  NB: Any data on your Windows XP computer must be considered 100% reliable! (This includes all of your usernames and passwords, for example, those used for online banking, etc.) You do NOT want to put ALL the data from Windows XP to a new computer or HARD disk.

  Good luck, Grandma. Hope that your grandchildren will treat you better than their parents.

  PS: Time wounds all heels.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Need help to install windows 7 Home premium on my mac.

  Ideas:

  • Need help to install Windows 7 Home premium on my Mac
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Installation of Win7 on a Mac has nothing to do with Windows Update. Please repost your question here rather: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Need help with error code 0 x 80070424 and 0x6D9

  I need help please!  Spent an entire day trying to figure this even ONCE!  When I try to change my windows firewall settings I get error code 0 x 80070424.  I worked at it so long, I forgot when I get the error 0x6D9 code.  But here is my BIGGEST problem, my computer won't let me do DOWNLOADS at all.  I even checked to make sure that the downloads are enabled in my internet settings.

  Any help would be GREATLY appreciated!

  Hi LindaL5299,

  I, too, got the dreaded error codes and spent much too much time looking for and try to apply the patches on the right!  I hope that I am sharing will help you!

  Have you seen this particular thread? (if you have, my apologies.)

  MS Answers: "I keep on getting error 0x6d9 and 0 x 80070424 code."

  If this isn't the case, you can check it out.

  Watch more precisely for the reply by VIJAY B.

  As a Microsoft Engineer, Vijay must know a few things about these formidable error codes!

  I have summarized his answer for you here.

  METHOD 1:

  If you have installed, UNINSTALL McAfee Firewall;

  AND

  T urn WINDOWS firewall "'WE ' "

  To ensure that Firewall service Windows is activated:

  1.   Click on:                         Start
  2 (in the search box) type: service

  3.   Select:                             services
  4 right-click right on: Windows Firewall service

  5.   Click:                              Stop

  6 right-click AGAIN on: Windows Firewall service

  7.   Click:                              START

  METHOD 2:

  Online virus scanner by using the Microsoft Safety Scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  METHOD 3:

  Try to install the latest updates from Windows Updates
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  
  

  METHOD 4:

  Run it Microsoft FixIt! tool (in the following article to see if that helps)

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/

  *************************************************************************************************************

  Keep this site in your 'Favorites', too!

  WINDOWS SEVEN FORUMS    An informative, resourceful AND Microsoft-recommended WIN7 users including Q & A community can save you hours on a Google search! I BOOKMARKED the site (and you could want, too!)

  *************************************************************************************************************

  Hope ONE of these methods is right for you, Linda!  I DO "feel your pain!

  As a company of independent workers, online "etailer", my time AND my livelihood depends totally my PC!  I spent many an hour (s) search on the error codes and try to find fixes.  So, I hope that what I have learned and have just shared can lend to fix your problem (s), also!

  FINGERS CROSSED!

  WendeeMcCee

  "The he Miss Fix - It [If I can!] ". "

  Empathetic to the woes to find fixes for those darn "error codes".

  I hope I can help IF I can, but

  I not an 'IT' pro!