I need help regarding linksys rv042.

Similar Questions

• Need help with Linksys WRT160N!

  I had a Linksys WRT160N (version 1) for a few years. I plugged it on my desk, followed by a VOIP router and a cable modem. Internet through Comcast cable with typical 15 to 20 Mbps DL and around 4 Mbps UL (via Speedtest.net and Speakeasy). My only wireless connections have been a Wii and PS3 without any speed problems (both tested).

  I just got a netbook Samsung N150 Plus with Win7 Starter and my DL speed is only 0.5-0.7 MB/s but UL is always around 4 Mbps. But only on the netbook... everything else is fine. I tried everything to fix this... updated the firmware on the router, tested the netbook on a different wireless network to ensure that it was not the wireless adapter (works fine), checked computer wired (works fine), tried different channels, tried to turn filtering off, tried to disable the firewall, tried to disable the blocking of anonymous requests etc. I read through other posts and the consensus was to get a new router. I can't believe this is my only option. Am I completely missing a simple difficulty here? Help, please!

  Thanks (and bear with me as I'm not as technically savvy as maybe others).

  OK... I had finally straightened it. I downloaded the latest version of EasyLink Advisor on my desktop and just rested on my network software. Wireless on my netbook DL speed went from 0.5 Mbps to 15 Mbps. I don't know why... all I know is that I couldn't install the LELA original (from included CD) on Windows 7 (x 86) although I managed to install the network very well (new PC is around the age of 6 months... used to have XP). Nothing has changed in the configuration of the router settings (at least not manually), so I'm not sure why it works now that LELA is installed on the Windows 7 desktop. If anyone knows I'm curious to know why this is... just in case someone else he meets and needs information.

• Nooblet needs help with Linksys WRT160Nv2 wired installation please

  Hello

  I've set up my Linksys WRT160N and when I check the status of the router in the configuration based on the web, the status tab page, there are numerical values for the Internet IP address.

  Therefore, I believe that the router connects to the internet via my modem netgear with no problems.

  The problem I encounter is that my browser (I tried explore and Firefox) will not have access to the internet.

  I tried to access the internet with firewall off, but always without success.

  Can someone give me some advice as to what settings in Windows XP or in the contrary case, I need to change to fix this problem.

  Thank you in advance,

  Thanks for the help guys.

  I seems to have fixed.  I uninstalled the Intel Pro Wireless software and restarted.

  Then I installed an older version of the driver 3.

  Was done half of the work, under network connections when I 'configure' network card, it is now showing a MAC address, before the uninstall and reboot, the MAC was using all 0 configure, but ipconfig/all showed the correct MAC address.

  But now the wireless has been constantly acquire an address, then connected, then entered directly by acquiring an address once again. so wouldn't connect after a few attempts.  Before uninstalling, it showed as connected, but I could not use the connection to access the router, internet, etc.

  Now, to fix the constant acquire an address, I updated the driver for the latest driver and the Intel Pro Wireless software and now here I am happily on my connection wireless hassle.

  Once again, thank you for the help.

• I need help regarding one of the apps in the AppStore :(

  BEFORE YOU DO NOT OBSERVE THIS, YOU SHOULD READ IT. I NEED QUICK ASSISTANCE.

  Hi, I do not know where to start. It was so annoying for days.

  Recently, I have re-uploaded the app re-launched "ElGard. Basically, I am not new to this game so I tried to connect my old account, but the password does not match. My old account contains elements of cash-shoot so I tried to contact Bicore(the developer of the game?) support for this. so far, spent two days and still I have no response from them at all. I resorted to office instead of email recovery support is because 'find password' in game is having errors for unknown reasons. For this reason, I created another account to a beginner. I decided I'll invest once more to buy Cubics(real cash from the game currency). So I bought a card iTunes $ 25 and $15 and over to my apple account. It is only in order to buy cubic, however, once I purchased the 3200 cubic for $29.99 it didn't reflect on my account ElGard but reflected on my account Apple, the remaining balance left after credits $40.29 was now $10,29. I have not received the RC for the purchase of the so I was wondering if Apple could help me in this matter. I've already sent bicore support to it but also did not get response so far. I'll give some pictures, but I don't know if you'll find them legitimate. Apple, please check my recent purchases, or you need so that I can justify for that matter. I feel deeply devastated after the incident, I worked hard for this small amount of money. I just wish that he be returned or at the very least, inserted in the game.

  

  

  FYI, you're talking about other users on these forums of users, not Apple and iTunes Support - I asked guests to remove your image of your post, because it contains your email address (it is not a good idea to post personal information on a public forum).

  Contact iTunes Support: http://reportaproblem.apple.com

• Need help regarding updated

  I use Macbook air and I get a notification to update my OS. What I do need to update or weather, even if I'm not updating...

  Need suggestion

  Thank you

  You don't have to be updated, but the new versions usually come with new features.

  If the guest is a minor update ("point"), it's usually a good idea to install the update. Minor updates typically fix bugs and s Curtis questions.

  It would be useful to know exactly what model (and care) is your MacBook and what version of Mac OS X you have currently installed.

• Need help regarding the extension of the media...

  Hello

  I have a sequence of still images and text above.

  I would like to extend the images and text. If I drag the end of a picture, that nothing is happening, probably because there is no room left, so I guess I have to switch from somehow to push each other instead of overwriting.

  Could someone help me out here?

  Thank you

  Ulf

  Select them... Right Click (Menu) and change the duration with ripple.

• Urgent need help regarding the deletion of snapshots /... Hilfe bei VMware Snapshots löschen

  Hello

  I have a VM and there is an existing snapshot.

  I chose Delete instead of delete.

  Is the snapshot still consolidate virtual machine or if the changes are lost?

  I mean because it was the last snapshot or sole, both delete and delete all did the same thing.

  Please give me a Feedback.

  See you soon

  Hallo zusammen,

  ICH habe eine VM bei der ein is instant.

  ICH habe alle löschen nur ausgeführt löschen statt.

  Trotzdem die Daten konsolidiert werden? sind oder die jetzt lavaggio verloren?

  Opinion nach, wenn man ein nur meiner hat eventuell beides process snapshot.

  Bitte um Feedback.

  Grüße

  English:

  Don't worry, be happy.

  German:

  Kein Grund zur Sorge. "Löschen" (sowie auch "Alle löschen") means that, dass die Daten eines Snapshots in its Parent gemergt werden disk. BEI einem instant individual die also basic disk.

  André

• need help with the backup of the copy of the OS

  Hi team,

  I bought the new Presario CQ40 and I need help regarding the opertaing and activation office 2007 system backup, please respond as soon as POSSIBLE.

  Thank you and best regards,

  Nancy (Julien).

  Are you needing information to create the recovery disk set? HERE

  As for activation Office 2007-if you paid for a license extend the 60-day trial version, simply enter your key when asked to activate. If you have not purchased a full license, you should be the link for the purchase of Ms. You can also buy Office 2007 locally(probably cheaper) and just use him license key to activate your preinstalled version.

• Need help with template coding

  I am relatively new to Dreamweaver, as well as for the use of models...

  I downloaded a DreamTemplates.com model (model 0055) and need help regarding the formatting of the template.

  I have removed the text below and including the financing Solutions (shaded red area) and added my own text in the field.  The new text is further down the page when I do - the cursor where the text is to be installed is in the middle (vertical height wise) and I really want it to be at the top, so that all the text added at the top of the 'block' - upward where the Soultions finance...

  Can anyone give me any suggestions on how to change the encoding for this?  I didn't know if I should post the code here or not.

  Thanks for any help you can provide.

  

  It's hard to say without seeing the code, but from what you described, it seems that the model be based tables?

  In this case to insert your mouse pointer in the cell where you want to type, go to the Panel of propteries > window > properties and check the alignment 'Green' is set to 'top '. You can choose 'top' from the menu drop-down next to "green".

• need help to set up Linksys printserver with verizon wifi hotspot

  need help to set up Linksys printserver with verizon wifi hotspot

  pfsjmhall,

  Configure your wireless router to use these recommended wireless router settings, I use channel 11. I would use a new SSID to connect easier.

  Then configure the Linksys print server. Find your network to give your passkey (password)

  Then set up the printer, choose network and follow the instructions.

  Rick

• VPN PIX 506e to Linksys RV042?

  I'm kind of a rookie of Cisco and need help to set up a virtual private network:

  I replaced a Netopia R910 with a Linksys RV042.  I have set the parameters of the best that I could.  I am trying to reconnect the VPN site to site of our network (192.168.0.x private, public xxx.xxx.109.202) to the remote network (xxx.xxx.131.50 192.168.38.x and private, public).

  In the Linksys VPN shows connected but no traffic coming.  I can't ping anything on the remote subnet.

  It worked fine with the R910 and no settings have changed on the PIX, other new pre-shared keys that match.

  Here are the PIX config and the RV042 config is attached as an image.

  Thank you very much for your help!

  Building configuration...
  
  : Saved
  
  :
  
  PIX Version 6.3(3)
  
  interface ethernet0 auto
  
  interface ethernet1 auto
  
  nameif ethernet0 outside security0
  
  nameif ethernet1 inside security100
  
  enable password ************ encrypted
  
  passwd *************** encrypted
  
  hostname pixfirewall
  
  domain-name ciscopix.com
  
  clock timezone PST -8
  
  clock summer-time PDT recurring
  
  fixup protocol dns maximum-length 512
  
  fixup protocol ftp 21
  
  fixup protocol h323 h225 1720
  
  fixup protocol h323 ras 1718-1719
  
  fixup protocol http 80
  
  fixup protocol rsh 514
  
  fixup protocol rtsp 554
  
  fixup protocol sip 5060
  
  fixup protocol sip udp 5060
  
  fixup protocol skinny 2000
  
  fixup protocol smtp 25
  
  fixup protocol sqlnet 1521
  
  fixup protocol tftp 69
  
  names
  
  name 192.168.1.0 FirstStreet
  
  name 192.168.38.2 Sco
  
  name xxx.xxx.130.94 FirstWan
  
  name 192.168.4.0 Oakurst
  
  name 192.168.7.0 Clovis
  
  name 192.168.3.0 Madera
  
  name 192.168.0.0 TomJ
  
  name xxx.xxx.131.58 FMLFirst
  
  name xxx.xxx.131.22 Integrity
  
  name 192.168.6.0 TJhome
  
  name 192.168.38.10 Server2
  
  name xxx.xxx.117.182 ClovisPublicIP
  
  name xxx.xxx.100.239 OakurstPublicIP
  
  name xxx.xxx.174.185 MaderaPublicIP
  
  name 192.168.38.64 VideoS1
  
  object-group network FMLRemoteOffices
  
    description Public IP's and Internal Subnets for All Remote Offices
  
    network-object OakurstPublicIP 255.255.255.255
  
    network-object MaderaPublicIP 255.255.255.255
  
    network-object ClovisPublicIP 255.255.255.255
  
    network-object xxx.xxx.109.202 255.255.255.255
  
  access-list inside_outbound_nat0_acl permit ip 192.168.38.0 255.255.255.0 Clovis 255.255.255.0
  
  access-list inside_outbound_nat0_acl permit ip 192.168.38.0 255.255.255.0 Oakurst 255.255.255.0
  
  access-list inside_outbound_nat0_acl permit ip 192.168.38.0 255.255.255.0 TJhome 255.255.255.0
  
  access-list inside_outbound_nat0_acl permit ip 192.168.38.0 255.255.255.0 Madera 255.255.255.0
  
  access-list inside_outbound_nat0_acl permit ip any host 192.168.38.248
  
  access-list inside_outbound_nat0_acl permit ip any 192.168.38.248 255.255.255.248
  
  access-list outside_access_in permit tcp any host xxx.xxx.131.54 eq https
  
  access-list outside_access_in permit icmp any any echo-reply
  
  access-list outside_access_in remark Sage e-prescription service 8423
  
  access-list outside_access_in permit tcp any host xxx.xxx.131.54 eq 8423
  
  access-list outside_access_in permit tcp any host xxx.xxx.131.53 eq 1202
  
  access-list outside_access_in permit tcp any host xxx.xxx.131.52 eq 7000
  
  access-list outside_cryptomap_20 permit ip 192.168.38.0 255.255.255.0 Clovis 255.255.255.0
  
  access-list outside_cryptomap_80 permit ip 192.168.38.0 255.255.255.0 Oakurst 255.255.255.0
  
  access-list outside_cryptomap_120 permit ip 192.168.38.0 255.255.255.0 Madera 255.255.255.0
  
  access-list outside_cryptomap_100 permit ip 192.168.38.0 255.255.255.0 TJhome 255.255.255.0
  
  no pager
  
  logging on
  
  icmp permit any echo-reply outside
  
  icmp permit any echo-reply inside
  
  mtu outside 1500
  
  mtu inside 1500
  
  ip address outside xxx.xxx.131.50 255.255.255.248
  
  ip address inside 192.168.38.4 255.255.255.0
  
  ip audit info action alarm
  
  ip audit attack action alarm
  
  ip local pool VPNDHCP 192.168.38.248-192.168.38.252
  
  ip local pool DHCP39 192.168.39.1-192.168.39.254
  
  pdm location Integrity 255.255.255.255 outside
  
  pdm location 192.168.38.0 255.255.255.0 inside
  
  pdm location FirstStreet 255.255.255.0 inside
  
  pdm location FirstStreet 255.255.255.0 outside
  
  pdm location Sco 255.255.255.255 inside
  
  pdm location FirstWan 255.255.255.255 outside
  
  pdm location Oakurst 255.255.255.0 outside
  
  pdm location Clovis 255.255.255.0 outside
  
  pdm location TJhome 255.255.255.0 outside
  
  pdm location Madera 255.255.255.0 outside
  
  pdm location TomJ 255.255.255.0 outside
  
  pdm location 0.0.0.0 255.255.255.255 outside
  
  pdm location xxx.xxx.141.217 255.255.255.255 outside
  
  pdm location 192.168.38.111 255.255.255.255 inside
  
  pdm location 192.168.38.3 255.255.255.255 inside
  
  pdm location FMLFirst 255.255.255.255 outside
  
  pdm location xxx.xxx.130.15 255.255.255.255 outside
  
  pdm location 128.0.0.0 128.0.0.0 outside
  
  pdm location xxx.xxx.109.202 255.255.255.255 outside
  
  pdm location Server2 255.255.255.255 inside
  
  pdm location ClovisPublicIP 255.255.255.255 outside
  
  pdm location OakurstPublicIP 255.255.255.255 outside
  
  pdm location MaderaPublicIP 255.255.255.255 outside
  
  pdm location 192.168.38.248 255.255.255.255 outside
  
  pdm location TomJ 255.255.255.0 inside
  
  pdm location VideoS1 255.255.255.255 inside
  
  pdm location 192.168.38.21 255.255.255.255 inside
  
  pdm group FMLRemoteOffices outside
  
  pdm logging debugging 500
  
  no pdm history enable
  
  arp timeout 14400
  
  global (outside) 1 xxx.xxx.131.51
  
  nat (inside) 0 access-list inside_outbound_nat0_acl
  
  nat (inside) 1 0.0.0.0 0.0.0.0 0 0
  
  static (inside,outside) xxx.xxx.131.54 Server2 netmask 255.255.255.255 0 0
  
  static (inside,outside) xxx.xxx.131.53 192.168.38.21 netmask 255.255.255.255 0 0
  
  static (inside,outside) xxx.xxx.131.52 VideoS1 netmask 255.255.255.255 0 0
  
  access-group outside_access_in in interface outside
  
  route outside 0.0.0.0 0.0.0.0 xxx.xxx.131.49 1
  
  route inside FirstStreet 255.255.255.0 192.168.38.254 1
  
  timeout xlate 3:00:00
  
  timeout conn 4:00:00 half-closed 2:00:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
  
  timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
  
  timeout uauth 0:05:00 absolute
  
  aaa-server TACACS+ protocol tacacs+
  
  aaa-server RADIUS protocol radius
  
  aaa-server LOCAL protocol local
  
  aaa authentication ssh console LOCAL
  
  http server enable
  
  http Integrity 255.255.255.255 outside
  
  http xxx.xxx.141.217 255.255.255.255 outside
  
  http xxx.xxx.109.202 255.255.255.255 outside
  
  http 192.168.38.0 255.255.255.0 inside
  
  no snmp-server location
  
  no snmp-server contact
  
  snmp-server community public
  
  no snmp-server enable traps
  
  floodguard enable
  
  sysopt connection permit-ipsec
  
  sysopt connection permit-pptp
  
  crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
  
  crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
  
  crypto dynamic-map outside_dyn_map 30 set transform-set ESP-DES-MD5
  
  crypto dynamic-map outside_dyn_map 50 set transform-set ESP-3DES-MD5
  
  crypto map outside_map 20 ipsec-isakmp
  
  crypto map outside_map 20 match address outside_cryptomap_20
  
  crypto map outside_map 20 set peer ClovisPublicIP
  
  crypto map outside_map 20 set transform-set ESP-DES-MD5
  
  crypto map outside_map 80 ipsec-isakmp
  
  crypto map outside_map 80 match address outside_cryptomap_80
  
  crypto map outside_map 80 set peer OakurstPublicIP
  
  crypto map outside_map 80 set transform-set ESP-DES-MD5
  
  crypto map outside_map 100 ipsec-isakmp
  
  crypto map outside_map 100 match address outside_cryptomap_100
  
  crypto map outside_map 100 set peer xxx.xxx.174.234
  
  crypto map outside_map 100 set transform-set ESP-DES-MD5
  
  crypto map outside_map 120 ipsec-isakmp
  
  crypto map outside_map 120 match address outside_cryptomap_120
  
  crypto map outside_map 120 set peer MaderaPublicIP
  
  crypto map outside_map 120 set transform-set ESP-DES-MD5
  
  crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
  
  crypto map outside_map interface outside
  
  isakmp enable outside
  
  isakmp key ******** address xxx.xxx.141.217 netmask 255.255.255.255 no-xauth no-config-mode
  
  isakmp key ******** address ClovisPublicIP netmask 255.255.255.255 no-xauth no-config-mode
  
  isakmp key ******** address xxx.xxx.64.82 netmask 255.255.255.255 no-xauth no-config-mode
  
  isakmp key ******** address xxx.xxx.67.172 netmask 255.255.255.255 no-xauth no-config-mode
  
  isakmp key ******** address OakurstPublicIP netmask 255.255.255.255 no-xauth no-config-mode
  
  isakmp key ******** address xxx.xxx.24.157 netmask 255.255.255.255 no-xauth no-config-mode
  
  isakmp key ******** address xxx.xxx.174.234 netmask 255.255.255.255 no-xauth no-config-mode
  
  isakmp key ******** address xxx.xxx.88.137 netmask 255.255.255.255
  
  isakmp key ******** address MaderaPublicIP netmask 255.255.255.255 no-xauth no-config-mode
  
  isakmp key ******** address xxx.xxx.109.202 netmask 255.255.255.255 no-xauth no-config-mode
  
  isakmp policy 20 authentication pre-share
  
  isakmp policy 20 encryption des
  
  isakmp policy 20 hash md5
  
  isakmp policy 20 group 2
  
  isakmp policy 20 lifetime 86400
  
  isakmp policy 40 authentication pre-share
  
  isakmp policy 40 encryption 3des
  
  isakmp policy 40 hash md5
  
  isakmp policy 40 group 2
  
  isakmp policy 40 lifetime 86400
  
  vpngroup FMLREASYVPN address-pool VPNDHCP
  
  vpngroup FMLREASYVPN dns-server 192.168.38.3
  
  vpngroup FMLREASYVPN idle-time 1800
  
  vpngroup FMLREASYVPN password ********
  
  vpngroup Brevium address-pool VPNDHCP
  
  vpngroup Brevium dns-server 192.168.38.3
  
  vpngroup Brevium idle-time 1800
  
  vpngroup Brevium password ********
  
  telnet 192.168.38.0 255.255.255.0 inside
  
  telnet TomJ 255.255.255.0 inside
  
  telnet timeout 5
  
  ssh Integrity 255.255.255.255 outside
  
  ssh 99.15.109.202 255.255.255.255 outside
  
  ssh timeout 5
  
  management-access inside
  
  console timeout 0
  
  vpdn group PPTP-VPDN-GROUP accept dialin pptp
  
  vpdn group PPTP-VPDN-GROUP ppp authentication chap
  
  vpdn group PPTP-VPDN-GROUP ppp authentication mschap
  
  vpdn group PPTP-VPDN-GROUP ppp encryption mppe auto
  
  vpdn group PPTP-VPDN-GROUP client configuration address local VPNDHCP
  
  vpdn group PPTP-VPDN-GROUP client configuration dns 192.168.38.3
  
  vpdn group PPTP-VPDN-GROUP pptp echo 60
  
  vpdn group PPTP-VPDN-GROUP client authentication local
  
  vpdn username admin password *********
  
  vpdn username tonette password *********
  
  vpdn username rosie password *********
  
  vpdn username cts password *********
  
  vpdn username MaderaFMLR password *********
  
  vpdn username ruth password *********
  
  vpdn username fogg password *********
  
  vpdn username lanier password *********
  
  vpdn username lanier2 password *********
  
  vpdn username justin password *********
  
  vpdn username mike password *********
  
  vpdn username heather password *********
  
  vpdn username Brevium password *********
  
  vpdn username jeremiah password *********
  
  vpdn enable outside
  
  dhcpd lease 3600
  
  dhcpd ping_timeout 750
  
  dhcpd auto_config outside
  
  username admin password *************** encrypted privilege 15
  
  terminal width 80
  
  Cryptochecksum:******************************
  
  : end
  
  [OK]
  
  

  NAT exemption, you must add the following:

  inside_outbound_nat0_acl ip 192.168.38.0 access list allow TomJ 255.255.255.0 255.255.255.0

• Hi, I recently bought numbers in order to create a commercial newspaper. I'm the pen and paper. I need help to create a formula. A purchase column determines if the entry price column is subtracted from the price of output column or output subtracted

  Hi, I recently bought numbers in order to create a commercial newspaper. I'm the pen and paper. I need help to create a formula. A purchase column; Determines if the entry price column is subtracted from the price of output column (buy) or subtracted from (Sell) entry exit. Thank you for your help

  Hi B',.

  Buying and selling in column B

  Price of entry in column c.

  Exit in column D price

  Formula (and outcome) in column E

  If the column will B always contained 'Buy' or 'Sell', it works. It is default to a calculation of 'sell' if sale or has been specified.

  E2: = IF (B = "Buy", D - C, C - D)

  If you want to delay the calculation until the amounts entered in C and D, use this version:

  E2: = IF (OR (LEN (C) < 1, LEN (D) < 1,"", IF (B = "Buy", D - C, C - D) ")

  If you want to delay the calculation until all three ducks are on a line (B contains buy or sell, C and D contain both data), use this version:

  E2: = IF (OR (LEN (C) < 1, LEN (D) < 1,"", IF (B = "Buy", D - C, IF(B="Sell",C-D,) "" ")))

  Third version used in this table.

  

  Kind regards

  Barry

• HP-15f039wm: need help to find the driver

  I got lost. need help finding the (USB) Universal Serial Bus controller. would be very grateful for help.

  Hello

  Try the driver on this link.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66211.exe

  Kind regards

  DP - K

• spectrum xt: need help with BIOS pwd

  Hi, need help here, I also forgot the BIOS pwd

  and I like code 59838445

  Thank you!

  Hello

  Enter 46790481

  Kind regards

  DP - K

• HP Pavilion Notebook - 15-p199: need help with the installation and activation of 10 Windows after completely uninstalling Windows

  Hello HP assistants.

  I need help for a specific problem. My laptop came with an installation of Windows 8.1. Then I upgraded to 10 Windows when it became available. After a while, I decided to uninstall Windows completely (to wipe the hard drive) and install a Linux operating system.

  Now, I decided that I want to use some software that is not available on Linux and if I want to reinstall Windows 10. My problem is that Windows has completely disappeared in a form any. So now, I need to download Windows 10 from an official source (which I think can be done fairly easily from the official source of Microsoft, although if there is a better, HP official medium to do this then please recommend it) and then I need to activate Windows some how.

  As has been made clear, I have the right to use Windows 8.1 and 10 but I would need to download Windows 10 and turn it on. Is there a way to do this? I'm literally stuck without solution.

  Thanks in advance.

  Hello

  As long as the previous installation of Windows 10 had activated Ok after upgrade from 8.1, you can simply perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K