I need to change the column of the range on my partition table

Similar Questions

• How to change the page numbers after adding & save page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers

  How to change the page numbers after you add and save the page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers.

  These page numbers were initially created using Acrobat PDF header and footer.

  I have a 750 page pdf document that I've created.

  I have to sometimes the pages up and down after that I added the page numbers in the document by using the Header_Footer tool on the right column of tools.

  But after you save the document, if I get a few pages around, I can't go back and change the page numbers.

  I thought that the page numbers, as indicated in the header and footer must have changed automatically, but I guess that once its print, that it cannot be edited - is that, as what is?

  So I guess we should always first get a copy without numbers of pages before confirming the documents and the creation of an index.

  A way to remove these page numbers already there and add new page numbers.

  Its a lot of work to align 750 court documents and then realize that you must move some and then realize the page numbers cannot be changed and thus begin to do this all over again to compile which can take about 10 hours.

  My question is quite simple, but I hope that overall, I got my point. Sorry if I made it is too complex.

  If no simple way, want to know if anyone has another different tool or a few recommendations to better highlight what I'm doing wrong.

  Thank you for your review and response.

  You should be able to update with tools - Pages - header & foot-

  Update... It not work for you?

  If this isn't the case, then try to remove from this menu and then re - adding them.

  Tuesday, June 23, 2015 23:55, Fortune Mile [email protected]>

• Hi, need to change the color of line at run time

  Hi all
  
  I have columns in the paintings is one of them for YES and it is of TYPE I create two attribute for this and place like this to trigger post_query block-level after that I get what I want the color of the YES and NO, but
  NOW I NEED TO CHANGE THE LINE COLOR IN FULL WHAT IT TAKES PLEASE GUIDE
  
  IF: ORDER_TRACKER2. TYPE = "YES" THEN
  SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.) TYPE ', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
  ON THE OTHER
  SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.) TYPE ', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
  END IF;
  
  Thanks and greetings
  Vikas Singhal

  IF :ORDER_TRACKER2.TYPE = 'YES' THEN
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.TYPE', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM1', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM2', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM3', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM4', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM5', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
  ELSE
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.TYPE', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM1', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM2', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM3', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM4', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM5', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
  END IF;
  

• need to change the language to English - United Kingdom for English - United States

  Just upgraded to FF 7.0.1 and now change appears in the form of books. Need to change the language to English - United Kingdom for English - United States.

  Thank you

  Dennis

  You can check the order of the installed languages:

  • Tools > Options > content > languages > choose

• Re: I need to change the CD/DVD drive in my Satellite Pro P200

  Hello

  I need to change the unit of DVD - RW in my Satellite Pro P200, but I 'don't know remove the old unit.

  Someone help me?

  Thank you.

  (Sorry for my English: S).

  Hello

  I advise you to visit this side:

  http://www.irisvista.com/tech/

  Note, if you don't find your model, you can see for others, who may be similar. 1 last thing, remove the battery and use gloves for protection (due to static), be careful with the holders of hidden

  Good luck!

• I need to change the keyboard on Tecra M5

  Hello

  I need to change the keyboard on a tecra m5.
  Unfortunately, this is not mentioned in the manual how to do this.

  Please advice.

  Thanks in advance for your help.

  Best regards
  Wim Gijsels

  Hello

  I think that it s not mentioned in the manual, because I should only be made of professional technicians for laptop

  In any case, a friend of exchanged me the keyboard and told me to remove the keyboard first support. Who s the plastic cover between the keyboard and LCD display. So open the LCD screen and use your fingers on both sides and lift the keyboard bracket. There are two screws that attach the keyboard under the door-keyboard. Remove the two and lift the keyboard. Last but not least remove the keyboard plate to remove the cable from the keyboard connector.

  As you can read it's not that complicated and I hope I could help a bit! :)

• Satellite Pro A60. I need to change the cd/dvd drive

  I am a complete "newbie" to this kind of help is welcome. I need to change the cd/dvd drive the current one is as good as a horse rocker with a broken leg! I also need to buy one that won't break the Bank.
  Thanks in advance.
  Countryman

  Hello

  You will need a compatible CD/DVD player.
  Not all readers are supported due to different master/slave/c-salt settings.
  ODD, that uses wrong settings will not be recognized by the BIOS.

  You can buy a compatible player to a Toshiba ASP in your country.
  You can also consult your user manual.
  In my manual, I could find some information on the compatible sides

• Computer laptop need to change the HDD in the SDS?

  Have 3 questions related to the Toshiba SSD!
  1. what laptop need to change the HDD in the SDS?
  ATA, http://www.toshiba.com/taec/adinfo/ssdfacts/ so 1.8 and 2.5, I look at who is the same dimenssions and right?

  2. I have this model Toshiba R200-S2031, is it possible to change drive HARD 80-SSD 256 1.8 inches? I understand that my model has 1.8 IDE I can't take 2.5? But replace IDE ATA is possible that they are the same size?

  3. If I R500 with 64 SSD drive, can I replace it it with greater SDS and the same size of thumb? Let's say I have 2.5 64 GB SSD ich so I could replace it with 500 GB SSD?

  tnaks for answers.
  and Toshiba - thanks to make small laptops, really enjoy.
  you want to update faster, but I LIKE THEM!
  Thanks Toshiba!

  Husbands

  (1) as a general rule, all laptops can be upgraded to an SSD. If the connector on the SSD is the same as the original hard drive connector, it should work.

  (2) I believe there are 1.8 "PATA SSD available, google is your friend.

  (3) I think the R500 is using a connector ZIFF customized for the SSD drive, then you will not be able to install a standard SATA or PATA 2.5 "SSD Drive. I don't know if you can buy SSDS with the connector ZIFF, once again, google can help you.

• I need to change the note/endnote.

  I write my RESUME, and I have a large number of appendages, that I have to put in the body of the text.

  I tried to do in the pages and the best option is to use an endnote, but I need to change the Exhibitor in order to appear ' doc 1 ' ' doc 2 '' ' doc 3 "" doc 4 "instead of"1""2"'3' '4' only." ""»

  Is this possible?

  Y at - it another option in addition to the note?

  Thank you

  No one who wants to get hired puts notes/endnotes in their curriculum vitae. If you do this, you write a report, not a professional CV, which should be in a concise and standardized format (mainly for the very picky, the applicant tracking software). I suggest that you omit the end notes/notes and do research on what constitutes a professional cover letter and resume writing for your job sector target.

• Apple need to change the title of we are here in support we are here to listen to

  Apple need to change the title of we are here in support we are here to listen to

  Say to Apple.

  https://www.Apple.com/support/feedback/

• Need to change the palette display function

  Hello!

  I looked through the options, but don't not found how to do function pallet to be able open Subvi cumstom location. I have attached two photos - it displays what I and the second picture shows what I want.

  PS: I have LabView 7.1

  Oh, OK. Your photos have been somewhat misleading. I thought you wanted to just have the names of the categories. If you want to include a pallet to your own record, you need to change the palette as already mentioned. The Help of LabVIEW describes how to proceed. It is in the LabVIEW environment-> section of customizing your work environment.

• I need to change the DHCP Pool to the LIST of 'DECLINE' for WINDOWS 2003R2

  Applies to: Windows | Windows 7 | Security, privacy, and user accounts
  I need to change the DHCP Pool to the LIST of 'DECLINE' for WINDOWS 2003R2 - I am unable to view the file named MACLIST.txt in C:\windows\system32, even if the file system is open and I am the administrator with full user rights. I see this file name in the REGEDIT, but cannot display to open it and place it in the MAC addresses I want to REFUSE in the server pool. The operating system is Windows Server 2003R2 Standard - SP 2

  Please help

  PRyan

  Hi SummaCorp,

  Thanks for posting your question in the Microsoft answers Forum.  If you have questions about Windows Server 2003, please visit the Windows Server Community.

• "You are not allowed to change the settings for this printer. If you need to change the settings, contact your system administrator.

  XP Pro, SP3. I downloaded the free Bullzip pdf printer. Somehow my old printer pdf in my printer disappeared list which I have used for years. I get this message when installing - "you are not allowed to change the settings for this printer. If you need to change the settings, contact your system administrator. I click ok and it ends, but it doesn't work. It does not appear in the printer control panel as a printer to change anything.

  I built this computer at home and I'm the only one using it. What is this function 'administrator '? I've never had to administrator on any program. Never. That is what it is?

  CNET is infamous for the grouping of things in its downloads as much a / v programs report as junk (I went through the same thing using eSet NOD32 has / v).  I seem to remember that if you ignore the warning and download the exe file and then use a tool like the free 7-zip to extract only the file necessary to run the program you want, you can work around the problem.

  For a pdf printer free which is not CNET - and works well - go here--> http://www.cutepdf.com/products/cutepdf/writer.asp

  EDIT TO ADD A LINK:

  See, for example, http://forums.cnet.com/7723-12543_102-582307/safe-downloads-cnet-com-sorry-but-not-anymore/

• I need to change the drive to a new drive letter, but XP will not let me because he thinks that the letter is in use.

  Quick question: I need to change the drive to a new drive letter, but XP will not let me because he thinks that the letter is in use, when it is not.

  The question for a long time: I've updated two disks in my computer from 1 TB to 2 TB. They were e and K:. The KC: drive is used as a backup of data on E: drive.

  I copied all the data on the old drive E: to the new, but when I put the new drive in place of the old, XP wouldn't let me assign the E: drive letter. It is ironic that several times, I see the warning that if you change a drive letter, some programs may not work - so of course that Microsoft is aware of this problem - however, it is annoying when you NEED to change a drive letter to OPERATE programs, but Windows won't let you. Sometimes, trying to protect users from doing stupid things prevents them from making things work...

  Anyway, after some research, I discovered that if I put the drive E: OLD and "remove" the drive of her letter, then the letter E: becomes available again. It did not work, and my computer is now partially satisfied with his new E: drive. However, the same trick with the new drive K: does NOT work.

  I removed the letter 'k': the old K: drive, but when I install a new one, it won't let me change it. It happens to be stuck at 'l': it's no use to me because backup programs are ready to use the K:\ path.

  There is that no "K:" drive in my computer and I deleted the letter k: the old disk. How do I FORCE XP to designate the new drive K: so that my backup program can work again?

  Thank you.

  Did you try to start your computer in Mode without fail (repeatedly, key to tap the F8 as your computer starts) and then try to re-assignment of drive letters?
  I think that some programs on your machine may be playing with your drive letters.  Boot safe mode will allow Windows to operate with a minimum of processes that are running and you should be able to change drive letters in these conditions.

  HTH,
  JW

• I need to change the motherboard in my laptop. How to reactivate XP and Office?

  I need to change the motherboard on a Dell laptop because of the infamous video problem Nvidia. The laptop has XP Professional, Office 2003, and all my other programs on it. After I have change the motherboard, I guess I'll have to reactivate XP and Office. How do I do that? Thank you.

  Hi J_C_H,

  
   

  Method 1: follow the steps described in the article below to activate Windows XP

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890

  
   

  Method 2: Follow the steps described in the article below to activate Office

  Activate Office
  http://Office.Microsoft.com/en-us/Visio-Help/activate-or-register-programs-in-the-Microsoft-Office-system-HA001118776.aspx

  Method 3: You can contact a Microsoft Product Activation Center

  How to find a phone number for a Microsoft Product Activation Center
  http://support.Microsoft.com/kb/950929/en-us