I need to print a new Page of alignment with each new cartridge?

Similar Questions

• HP LaserJet M2727 MFP Series PCL 6 - prints the blank page before and after each document in all cases

  HP LaserJet M2727 MFP Series PCL 6
  prints blank page before and after each document in all cases
  Does anyone else have this problem.

  It must be a preference setting, but I watched three times and CAP does not seem to determine what setting to change.

  See if they help you:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c01477176&prodTypeId=18972&prodSeriesId=3377075

  http://h30499.www3.HP.com/T5/printers-LaserJet/LaserJet-M2727-NF-can-I-suppress-blank-pages-with-this-printer/TD-p/2359555

  http://superuser.com/questions/315522/computer-prints-blank-pages-before-and-after-content

• C-309 g HP Photosmart Premium: Incompatible print head - new cartridges for C309g

  Cleaned all the contacts on the print head as shown on the HP website that I wasn't getting any 'black' to get out.  All other colors worked very well.  Noticed that there is a generation of black ink on the print head upward.   Put everything in.  It did the alignment, but he does not terminate.  I had a recording error to restart the printer.  This and now I have and incompatible print head message.  Open a new ink cartridge and I still get the same error.  In addition, all went out again and verified, and there was ink black build-up on the contacts on the print head again.  Any suggestions?  Ink cartridges HP isn't some off the mark.

  Try these Youtube videos.

  https://www.YouTube.com/results?search_query=C309g+PRINTHEAD

  Find out more if necessary.   If this does not work, your printer is toast.

• black ink does not print from new cartridges

  black ink does not print on photosmart 5514 running Windows XP. has crossed all suggestions online, changed twice same cartridge. What should do?

  Thanks for the reply.  I tried everything you suggested and it still does not work. Stayed for more than an hour on the phone with tech support and they also determined that it is a hardware problem.

• Print a page of test before regionalization resets. Old ink or ink cartridges new cartridges?

  My wife bought a HP Deskjet F2492 in Italy while attending school there.  She needs to get a regionalization reset for US, ink cartridges, now that she is back in the United States.  She has US cartridges and gets a message "incompatible cartridge" with lights flashing when they are installed.  With the US cartridges in the printer, the button cancel and pressing the launch button color print at the same time does not print a test page (it works with the European, but not the US cartridges cartridges).

  I understand that the procedure is to run a test page and obtain the codes corresponding to the 11, 21, 52, 62. and 25.  Then contact HP that will calculate the numbers that must be entered in 5 fields on a dialog box that opens when you double-click on the blue HP logo in the window of the print preferences (Windows 7).

  It's true that we run the test with the new page WE cartridges in the printer to get valid codes (we were led to believe that this was the case)?  If so, how actually print us a test page with the US cartridges since the method described above does not work?

  Thank you for your help.

  The test page can be printed with the cartridges 'old '.  You will need to Contact HP to ask a "regionalization Reset."  I suggest that you do this before you worry about the details of what to print, the agent will take you through the process. Do not charge for this, it is covered under the warranty of the cartridge. You will need to have access to your computer and printer then on line with HP. You will also need to have a set of cartridges for the new region, once completed reset cartridges of region of origin no longer works.  Webpage of HP on the subject is here.

• Can I print the last page of a PDF document using the command line?

  Hello

  I'm in a situation where I constantly have to deal with several documents in PDF format, and I need to print the last page in each of them and ONLY the last page. The total number of pages vary for each file, so the page to the last page number will also vary.

  I really prefer to not do it manually, to open each file in the visible window of Adobe Reader, and then print.

  Question:

  Is it possible with Adobe Reader (perhaps with the help of another Adobe product) to print only the last page of a PDF document using some sort of command line without having to open the PDF file in the Adobe Reader window visible?

  I use Windows.

  Thanks in advance,

  Kind regards

  Emil

  Hey, I've just set up a measure of inquiry by accident. That's really bad thinking. Here's what to do.

  When the "Create new Action" checkbox is shown...

  Choose Start with: a file open in Acrobat

  DO NOT CLICK on add a step statement

  Open tools more

  Click once on run JavaScript

  A blue line to run JavaScript must appear on the right side.

  Click on the small box under Options inside the blue line

  A JavaScript editor should appear; Enter the program, and then click Ok

  To save in: select do not save the changes.

  Click Save

  Give a name; you don't need to enter a description (although it won't hurt if you do).

• You can print only the pages from the specific master page?

  I'm laying a big enough technical book using InDesign CS4 and need to print evidence of pages that use a specific custom master page. Rather than scroll the window to the Page and write the page numbers that use this specific basic form, I would have a quick way to do it. If someone knows a way to do this through script or other means, I would really appreciate the help. Thank you!

  NOTE: Originally posted in general, discussion, and recommended it to the forum script.

  Straight to the point, it seems to me. Commenting on a wide was free, today.

  // Gather Master Spread names
  masterlist = app.activeDocument.masterSpreads.everyItem().name;
  // Create a simple yet effective dialog
  masterDialog = app.dialogs.add ({name:"Select Your Master",canCancel:true});
  with (masterDialog)
  {
            with (dialogColumns.add())
            {
                      with (dialogRows.add())
                      {
                                listbox1 = dropdowns.add ({stringList:masterlist, selectedIndex:0});
                      }
            }
  }
  
  // Get input
  if (masterDialog.show())
  {
            selectedName = masterlist[listbox1.selectedIndex];
            // Build Print string
            pages = [];
            for (i=0; i		   

• How to print a master page?

  I need to print a master page in the future. Is it as simple as selecting "print master pages" in the print dialog box? This will display all my text frames and image? All the grids etc. ?

  See you soon

  Mark

  In fact, Yes. You will not see the contours of the block unless they are scratched, and you must check the box print visible guides and grids and make sure that those who show if you want, too.

• How to print a report page and elements?

  db11gxe, apex 4.0, firefox 24,

  Hi all

  I have a page with a report and two points and I want to print the entire page (the report with the elements), apex is enough?

  Thank you

  Hi Newby.

  If you want to print the entire page, you could just right click on the page and select print. Therefore, using the default browser feature.

  Kind regards

  Joni

• Can I create a page Web of Muse that it is child Pages could be open on different computers and communicate with each other?

  
  I want to create a Web site with 4 child pages that interact with each other when opened separately on 4 different computers.

  Is this possible?

  Example:

  Child 3-page Web site open on 3 different computers with triggers and the following objectives:

  PC #1 - child #1 - confirm button (trigger)

  PC #2 - Page #2 - accepted Confirmation Popup, resulting by clicking on 'confirm' page computer/child #1 (target)

  PC #3 - child Page #3 - calendar Popup changed, resulting by clicking on 'confirm' page computer/child #1 (target)

  Any ideas are much appreciated.

  THX.

  No this is not possible with Muse.

• new cartridge did coincide, but this page prints every time that I start printing, my waste. C3180

  HP Photosmart C3180, I had several years.  Recently installed new black ink 92.  Print alignment cartridge successfully page.  Whenever I turn on the printer to start printing, this page will be printed once again, my waste.  How can I get it to stop?

  I'm happy to help you.

  The black inks and color print ok?

  Ink readings are an estimate and is not accurate.  I think that the reason why the printer continues to try to line up is because of the low color ink.  If you do not need color, you can see if the alignment stop if you remove the color ink cartridge.  They stop?  Is it the black printing ok?

  If alignments are continuing, I recommend to replace the color ink cartridge.

• My fairly new Epson WF-2540 is nothing prints on the page, although it pulls the paper and it looks like it's printing, producing a blank page

  The properties show the levels ink because at least half full and I tried to realign the print heads, but still gets the same result.

  This was a new printer and printed a dozen pages before printing, it stopped.

  Hi Anita,.

  Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer. To resolve this problem, use the following methods in the order in which they are presented. If method 1 does not resolve your problem, go to the next method.

  Method 1
  Try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2
  Clear printer spooler files and activate the spooler service
  Step 1
  a. Click Start, type "Services.msc" (without the quotation marks) in the Open box and click OK.
  b. double click on "Printer Spooler" in the Services list.
  c. click on stop, and then click OK.
  d. Click Start, type "% WINDIR%\system32\spool\printers" in the opened window and delete all the files in this folder.

  Step 2

  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on Print Spooler serviceand then click Properties.
  d. on the general tab, next to startup type, make sure that automatic is selected.
  f. e. the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, refer to the article below.

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Method 3

  To identify and fix common printer problems in Windows, including print errors, errors of spooler for printing and other issues that could prevent you from printing, see the article help.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• How to change the page numbers after adding & save page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers

  How to change the page numbers after you add and save the page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers.

  These page numbers were initially created using Acrobat PDF header and footer.

  I have a 750 page pdf document that I've created.

  I have to sometimes the pages up and down after that I added the page numbers in the document by using the Header_Footer tool on the right column of tools.

  But after you save the document, if I get a few pages around, I can't go back and change the page numbers.

  I thought that the page numbers, as indicated in the header and footer must have changed automatically, but I guess that once its print, that it cannot be edited - is that, as what is?

  So I guess we should always first get a copy without numbers of pages before confirming the documents and the creation of an index.

  A way to remove these page numbers already there and add new page numbers.

  Its a lot of work to align 750 court documents and then realize that you must move some and then realize the page numbers cannot be changed and thus begin to do this all over again to compile which can take about 10 hours.

  My question is quite simple, but I hope that overall, I got my point. Sorry if I made it is too complex.

  If no simple way, want to know if anyone has another different tool or a few recommendations to better highlight what I'm doing wrong.

  Thank you for your review and response.

  You should be able to update with tools - Pages - header & foot-

  Update... It not work for you?

  If this isn't the case, then try to remove from this menu and then re - adding them.

  Tuesday, June 23, 2015 23:55, Fortune Mile [email protected]>

• Printing a Web page to a .pdf or .xps file generates a file but it is empty. How can I fix it? I have Firefox 40.0 on a new computer laptop for Windows 10

  When I print a Web page to a .pdf or .xps file, it creates a new file, but file Explorer says it's 0 KB in size. These .pdf files will open, but they are white - the only thing that appears is the outline of a page, without anything in the outline. When I print an .xps file, File Explorer shows that it contains 0 KB. When I try to open it, I get a message saying that the XPS Viewer cannot open the file. These things just started for me a few days after I installed Firefox 40.0 on a new computer laptop of Toshiba Satellite with 10 Home Windows operating system. I have the latest version of Flash Player (in fact, I just tried redownloading and reinstalling the current version; that does not solve the problem). I tried to change the format by default to print to .pdf file, but that has not solved the problem. I contacted the chat Windows support site; They told me that it was not a Windows problem. Is this a Firefox problem? If so, you can tell me how to solve the problem, please?

  Thank you
  ssavage

  First of all, try to disable the extensions to see if that helps this, then try safe mode.

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • The problems of Firefox in Mode safe

• I need to print from firefox icon as I used, because some pages that I need to print do not load with the menu.

  Since a recent automatic update, I was not able to print by clicking on the firefox tab icon. I have pages that I need to print, that do not load with the toolbar complete with the key of menu etc. I could always print by clicking on the icon, but no more. Help please.

  you could try pressing and use 'ctrl' then 'P' on your keyboard
  We also write 'ctrl + P', it's the printing system wide combination of shortcut keys.

  Alternatively, you can try, right-click in the title bar (where your loading tabs) and selecting 'Menu Bar', which will show the menu bar (with file, editing, display, etc.) on the tabs allowing you to print from the submenu file

  hope that helps!

  See you soon