XP Pro sp3 freezes on the installation of the software

Similar Questions

• Failed to install IMAPI_XP_SRV2003_x86.exe on Windows XP Pro SP3. Receive the message that is not a valid Win32 program.

  Original title: imapi.

  Failed to install IMAPI_XP_SRV2003_x86.exe on Win XP Pro SP3. Receive the message that is not a valid Win32 program. I downloaded the MS program two times with the same results.

  Hi tugadaq1,

  Your computer is connected to any domain or network?

  If your computer is in a domain environment, I recommend you ask your question in the forum MSDN for assistance:

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Hope the helps of information.

• Satellite Pro 6000 freezes and the screen is weird random pattern

  Hello

  I recently bought a SP6000 second-hand advertised as having "graphics problems". After 10 minutes or use the laptop freezes and the screen has a strange random pattern all acorss it. The speakers are also a strange hum. I have to stop the laptop and restart.

  I've updated the bios and drivers for card video from the toshiba site, but he always does. Can anyone help?

  Hello

  It's not easy to say why this problem occurs. You have purchased a second hand unit. It is possible that your device has a hardware malfunction, but I can't give you an answer why it is happening. I suppose that temperature increases after 10 min of use.
  Maybe this could be a problem. It could also be a fault of the motherboard. But these are just suggestions. In my opinion, you should ask the service for detailed information.

• Satellite Pro A200 freeze, including the power button

  Had a complete system freeze last night - first tabs of Firefox, then, when I tried to call the Manager of tasks, CTRL + ALT + DELETE does not either. I pressed the off button several times, but couldn't turn off the laptop.

  After disconnecting the power cable, the power led is stayed blue and he was always running on battery, even if the battery led was off. I left the laptop (what can I do) until the battery has been emptied and it closes.

  This morning, it came normally, followed by this error message:

  "the exception unknown software exception (0x0eedfade) occurred at the location 0x7c812a5b.

  Followed by a screen of windows update updates have been made and the computer will restart soon (just in case where which can be connected - the night before, the symbol of "updates available" was in the shortcut bar too, and when it froze, I ran my virus check Spyware Doctor daily in the background).

  I rebooted the computer without other error messages and it has been fine until now, but I have no idea what caused it, and if it happens again. Any advice?

  > I left the laptop (what can I do) until the battery has been emptied and it closes.
  What else could do you?
  First of all, you could hold the power button for about 4 seconds and it would help tp close Notepad. Then you could reboot the laptop to check if the system is running correctly. However, it seems that it s running again.

  > I rebooted the computer without other error messages and it has been fine until now, but I have no idea what caused it, and if it happens again. Any advice?
  Believe me, it's really not easy to say what caused this problem system and I guess nobody here will be able to answer EXCATLY.
  In my view, there was a software problem that was solved by new reboot and a new update to Vista
  Strange things still occur and are not rare for me.

  Welcome them

• Satellite Pro L300 freezes on the Toshiba homepage

  When he put on then get frozen screen toshiba so impossible to go to safemode etc...

  Can anyone help?

  Hello

  This means that your laptop can not pass the POST (Power On Self Test).

  Self test is a rapid diagnostic test that checks the motherboard and connected devices
  Theoretically, what could cause this problem faulty motherboard, RAM failure, etc.

  In your case, I recommend you remove the RAM modules and check the simple modules.
  You can try to remove only a single module. Check the two modules by using this procedure

  Otherwise, you will need assistance from professional technician that the guy could run tests to find out what part is malfunctioning...

• HP LaserJet Pro P1102 printer: download the software

  Please, I want the driver for my printer "HP LaserJet Pro P1102 printer" because it does not work on my macpro os x10.10 and when I opened the tab pilot Web site recognize my version software and everything's fine, then I click on update, and nothing happens.

  I need the driver to install, or everything that was supposed to let my printer works on this laptop

  Thank you

  Hi @mohamedashraf,

  I see that you have any questions, get the drivers for the printer. I'd love to help you.

  You need to run Apple updates to install the drivers for the printer.

  Here is a document with the steps to set up the printer on Yosemite.

  Update the HP printers - installing a Mac printer driver by using the Apple software.

  You have the Laserjet P1102 or Laserjet P1102w?  How can I find my model number or product number?

  How is the printer connected? (USB / wireless)

  If you appreciate my efforts, please click on the button below the thumbs up.
  
  If there is anything else I can help you, let me know. Thank you.

• OfficeJet pro 8550a: cannot install the software driver officejet pro 8550a on windows 10

  Nice day. I tried to use the cd and driver online. CD refused to work as win 10 has been recognized as platform is not taken in charge. I tried to use the driver on the site of hp for this printer, but he could not find the printer thought my win 8 same wifi network and pc win 7 had no problem. My pc is able to see the printer as well, but I seem to be unable to locate the pin code on the printer required to connect it. My work is based on this printer and it would be great to hear from you soon.

  Hi, HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning. Download and run printing HP and doctor Scan quickly and automatically perform several tasks of troubleshooting.

  When you click this link, HP Print and Scan Doctor is downloaded using the download of your Internet browser capabilities.

• a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3

  a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3
  What is the solution?

  Check out these links

  http://TechNet.Microsoft.com/en-us/library/bb457001.aspx

  http://UIs.Georgetown.edu/software/documentation/WinXP/WinXP.network.printer.html

• Windows xp pro sp3 can not get updates - don't stop to check updates and nothing happens.

  For the past 2 weeks I can't get windows on windows xp pro sp3 updates. The green bar that runs while the verification of updates just keeps running and running and does'nt stop until I have stop. No error codes at all.
  Run the fix it tool and indicates "registration for the service is missing or corrupted" and it offers a solution for the problem of the does'nt.
  What is the reference for this?

  I had the same problem and you will spend one day trying many suggestions, including various Microsoft Fix - its, which none worked, and which some worse messing with the BITs service (that I then had to restore, losing even more time).

  In the end, I found that the problem was related to the update of Cumulative security for Internet Explorer 8. There is a kind of incompatibility with previous versions of this update that causes IE stuck when he tries to check the updates.

  The solution for me was to download and install the * last * IE Cumulative Security Update * manually * before you try to run Windows Update to get the other patches. Here's how:

  (1) using the Internet Explorer, I visited the current MS security bulletin page

  http://TechNet.Microsoft.com/en-us/security/bulletin

  (2) from there, I went to the latest summary (November 2013) and found the update of IE at the top of the list: "Cumulative Security Update for Internet Explorer (2888505).

  (3) I couldn't see direct links for just this update, so I copied the number of the Knowledge Base - 2888505 - and google for "Download KB2888505" (Bing didn't work by the way). This gave me the direct download link:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41074

  (4) I have downloaded and run the update installer and then restarted (as required by the software update).

  Microsoft/Windows Update restart worked. I repeated the same process on a second computer with the same problem and it worked also.

• Windows XP Pro SP3 lost CDROM

  Hello. Not sure if this is the right place for the post, but im pulling my hair out.

  I got a copy of Windows XP PRO SP3 OEM for awhile. The installation disc is damaged and was unusable. I have a legitimate product key which is connected to the computer.

  Is there anywhere I can buy or order a replacement CD-ROM.

  I can't find a copy of this disc anywhere. On the COA, proof of license number is x 14-01711. I looked up and down and still no luck.

  I got a Windows XP Pro SP3 .sdc, but the license key is not accepted during the installation.

  Thanks for your time.

  SKU: E85-05683

  Please see How to replace Microsoft software or hardware, order service packs and updates of product and replace product manuals   Boulder computer Maven
  Most Microsoft Valuable Professional

• Delete user for unknown accounts profiles in XP Pro SP3

  I've got profiles user for unknown accounts in XP Pro SP3.  In the past, I've deleted then recreated with the same account name administrator accounts.  I have observed that no active administrator accounts have the same size and modification date user account unknown profile.  Can I safely delete the profiles of unknown account or delete profiles delete profiles of active account?

  Hello

  The unknown user account can be a corrupt user profile. As there is no data to this account, it is safe to remove it from your administrator account.

  To delete the user account, follow the steps from the link below:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/lsm_delete_user.mspx?mfr=true

• I downloaded the software and I bought Adobe Acrobat. Whenever I want to open a PDF with Adobe, a screen appears saying that the trial period has expired and I need to buy the software. I purchased the software and downloaded on my calculation

  I bought Adobe Acrobat Pro and I downloaded the software. Whenever I want to open a PDF with Adobe Acrobat Pro, a screen appears saying that my trial period has expired and I have to buy the software first. But I bought and downloaded. I don't understand. Can you help me?

  I bought a subscription. But the problem has been resolved in the meantime. I had probably forgotten to save...

• New installation of XP PRO sp3 does not recognize the 500 GB HD

  OK, here are the details:

  System: Computer PORTABLE of Acer Aspire 1700 Pent4, 2 GB of RAM, 80GB (3.5 "full-size, trainee) IDE HD [this is the original HD on this laptop of size important which is designed to use disks 3.5" hard].

  Initial situation: Windows XP Pro (SP3 integrated) installed on HDD of 80 GB and works without poblems. BIOS does NOT show the ability of the intern HD in the BIOS screen. BIOS reports only the model and the serial number of the HD, and there is no options to specify the HD type/format (e.g., MLA, etc.)

  Available: Win XP Pro bootable CD slipstreamed with SP3; It is tested and verified work well to install PC or laptop!

  When running XP Pro on a partition internal 80 GB HD, and when I join a brand new WD 500 GB IDE HD via USB, HD is recognized correctly. I can partition and copy data on the HD 500 GB with no problems!

  When I replaced the old 80 GB HD with the new HD 500 GB HD interning on the laptop, I have the following problems:

  1. I can NOT boot into Windows XP Pro (SP3) which was Ghost on the HD 500 GB of the old 80 GB portable HD it recharges, and if I try the console recovery or secure boot, then the laptop restarts also.
  1B. I have Ghost xp partition to 80 GB HD to a piece of spare HD (40 GB) and replaced the 80 GB with the 40 GB HD and was able to start the laptop without problem. So the problem is NOT related ghost!

  2. I can't perform a clean install of Windows XP Pro (SP3 integrated) because Windows XP Setup recognizes the HD 500 GB GB 131 HD. Therefore, the remaining capacity is not recognized.

  3. I can NOT perform the installation of Windows XP pro (SP3 integrated), even if I have previously partition new HD 500 GB by attaching it to a free desktop PC and use Partition Magic, partitioner of Paragon Disk or other partitioning tools. After partitioning prior, when the 500 GB HD is installed on the laptop (as a trainee HD), then win xp installation lists quality HD of GB 131 and lists the existing partitions as corrupt!

  4. Curiously, if I use Knoppix, Debian, Ubuntu or linux boot CD Mint and start the laptop computer with one of these linux distributions, then the linux installer recognize the HD properly during the phase of recognition of material and later during the phase partitioning HD, the linux system to report a full capacity of 500 GB available for partitioning. In addition, when there are partitions, partitioning linux program then lists these partitions properly as well!

  Considering the 4 points and especially MS Windows XP PRO (integrated with SP3, which should recognize HD with sizes exceeding 137 GB limit - from MS says you must be at least XP SP1 to overcome the size 137 GB limit - and that the different distributions of linux can see the full-size HD 500 GB with no problems) which is exactly the problem with Win XP? Why it does not recognize the full capacity? And how to win xp recognizes a 500 GB capacity, if the new HD is attached to the laptop via USB as an external drive when running XP PRO (SP3) of the 80 GB internal HD?

  so... Can anyone sheds light on the issue with Win XP Pro installation on HD 500 GB IDE?

  Nicely,

  LO

  Hi Palcouk and Doc,

  I think that's the final answer!

  Although, there is a mixture of simple to complex responses to the problem at hand, what it all comes down is that there is a significant difference between the installation of Windows XP and Linux installer program. The XP installation program needs help from the BIOS to deal with HD, and if the BIOS does not support, XP not has no facility to remedy the situation. OTOH, most of Linux new kernels rely on the BIOS for a limited number of extended, but communicate directly with the hardware, in this case, with the HD and therefore manages the material accordingly.

  It seems among users of dual-booting (win/linux) using old PCs, it is a matter of very pretty. What they end up doing is using the first 137 GB that is seen by the BIOS without problem for XP (either as a single partition or divided into several partitions), and the rest of the space is used for Linux because linux has no problem.

  I guess that it really nails the problem with my laptop to a BIOS NON-lba-48-bit!

  Then close this thread as answered or matter who has more to say about this?

  LO

  P.S.: It was very nice meeting you fellows and appreciate all the help and tech expertise.

• Satellite Pro U400 freezes sometimes when the power cord is plugged

  Hello! I know that this problem has been addressed here and there, but I'd like to open a new thread about it. Here's the scenario.

  I recently bought a new Toshiba Satellite Pro U400-247 (PSU45E) with two batteries: (a) the original, (b) in addition purchased authentic of Toshiba PA3636U-1BRL, 7200 mAh. The laptop has the latest BIOS (4.80) and the latest drivers downloaded from Toshiba and installed (ConfigFree is not installed). I use XP Pro SP3 (own installation by myself). Everything works fine, except for one thing:

  Sometimes (but), when the laptop is running on battery power and I plug in the power cord, everything hangs and I have to restart. A few observations:

  It tends to occur more frequently when the low battery alarm has rung;
  (b) it seems to happen more frequently with the 7200 mAh battery and less frequently with the original battery.
  (c) it seems to happen most often when a USB device (mouse, for example) has been linked to the laptop, but it is not a rule;
  (d) it seems to happen less often when I move the mouse USB at the time wherever I am connect the power cord.
  (e) I've experimented a lot with Toshiba PowerSaver settings (for example to change the levels of CPU for my profile) but nothing I changed seems to change the situation.
  (f) I tried different suggestions I found on various forums, but nothing works (for example the BIOS settings);
  (g) otherwise, I can say that I have not really seen a smoother computer, everything works really fine, no other problem :)

  Everything that makes me think it must be some sort of bug in the drivers of motherboard driver PowerSaver or other drivers interact with battery, CPU or possibly USB. Y at - it an explanation to this problem and can it be rectified in some way (for example, by providing a driver update)?

  Hello

  First of all, I never heard a driver from the motherboard.
  There is a drive chipset or a graphics card driver. There is no such thing as a driver of the motherboard!

  Look, man. laptop should work fine even the AC adapter is connected or not connected
  If the laptop freezes while there might be a software problem, but in my opinion it could be hardware problem
  You must reinstall the operating system if the laptop would freeze always the issue might be related to hardware

  First of all the memory modules and AC adapter must be verified.
  If the problem persists even using new modules and AC adapter, motherboard may be affected.

• Mac Pro 1.1 2006 fails installation of Mac OS x after the kernel panic

  Hi all

  A few days ago, I have known repeated panics of the kernel starting with my mac pro xeon quad core 1.1 (2006).

  It was not impossible to access the system (to the start screen kernel panic), impossible to access SafeMode (stuck at apple logo stuck charging symbol), I decided to do a clean install of the system (Lion).

  Installation is anyway impossible, because when I plug the usb with lion pen, he anyway stucks at the apple screen logo and freezes loading (the same problem also occurs if I burn image of lion uploaded on the apple store on a dvd).

  I tried the dvd and usb pen on another computer and installation went flawless.

  Then, I tried to reset the SMC, reset the PRAM, but it's always the same.

  Then I tried to do an apple hardware test (full expanded mode) and after 55 minutes of testing, he said no. PROBLEMS DETECTED.

  What I try to do?

  Thank you very much.

  I don't remember if it works in Lion, but see if you have the time to hit the keys CMD + L when the installation starts, to get a visible history of the NSO will.