I need to register the movements of the mouse ON the video

Similar Questions

• My nlasvc.dll is corrupted replace it has not seemed to work I need to register the dll

  My nlasvc.dll is corrupt - I found this by using sfc/scannow

  I replaced the dll with a new copy of the same version and tried to run RegSvr32 on it, but this failed with the message-
  The "\windows\System32\nlasvc.dll" module was loaded, but the DllRegisterServer entry point was not found.
  Do I need to register this dll?
  On a subsequent sfc/scannow it shows again that the nlasvc.dll is corrupt
  What should I do next?
  I am running Windows Vista

  Try to restore your system at a time before the problem happened.

  Try to create the check and the disk to repair Windows 7 If you could solve the problem in this way:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

• need to edit the video filmed on the side

  I need help that I filmed a video with my camera on it side and now do not know how to enable editing
  is it possible to make before I burn it to a disc? As is if I burn now we will all have to lie on the floor to watch
  it on our shores ha ha ha
  Please can someone help me

  Thank you so much John it works a treat now I can send the video to all my friends and they don't think I'm a total twit
  Thanks again and have a nice day
  Patsue55

  =================================
  You are welcome.

  Thanks for the update: o) John Inzer - MS - MVP - Digital Media Experience

• you will need to upgrade the video card. I was wondering

  Hi, I have a laptop 15 inch G62 - 348 CA with an AMD M880G with ATI Mobility Radeon HD graphics card 4250, and I know the laptop did not have option property other than the RAM upgrade, but I was wondering if I could switch to something were better I play black ops and others.

  Hello

  It is not possible to upgrade the video card in your laptop, as it is physically soldered to the motherboard and for all practical purposes, is not a replaceable component.

  Kind regards

  DP - K

• Need to update the video driver card but see no updates available

  Recently, I downloaded minecraft. I played only once and I know that its law does not. I had to lower the acceleration so it will play. Someone told me "if I have to lower the acceleration so I have to update my video card." I tried to update, but when I try it says I have no update available. Also my current v-card is a intel gm965. Help, please.

  * original title - my computer cannot update video card but he can't play minecraft as it should. What should I do? *

  Hi Craig l. Williams,.

  Have you checked on the website of the manufacturer directly?  If you bought it separately from the video card you want to navigate to the Intel Web site.  If it is preinstalled on your system, you want to go to the Web site of the manufacturer of the system for the updated drivers.

  For more information, please visit:

  http://support.Microsoft.com/kb/283658

  I hope this helps!

• Files in LR4 Beta, but did not buy and need access to the videos

  I tried LR4 and some of my videos put into it (and unfortunately did not keep outside the LR4).

  Since I am stay with Aperature instead of buy LR4 and, of course, the beta is on I can not understand how or if I can export these files.

  Any help/advice would be greatly appreciated

  You put all the files 'in' Lightroom and move from another location.  When you add images in the Lightroom Catalog, Lightroom knows just where the images are found in your computer system.  If you know the name of the folder where you downloaded these video files, everything that you need to do is to navigate to the folder and they will be there.  If you don't know where they have been downloaded, you then need to do a search with one of your OS tools to locate.  But they are not in Lightroom.

• Urgent need, to load the video image

  I got caught in this during 2 days, please help, it has been difficult to find someone to answer my son... Thank you
  
  I have a preloader movie that loads a movie called rotando6.swf
  the problem is that, on the main stage, I have only a movie called sphere,
  I need the preloader to load rotando6.swf but also load frame 2 of the sphere of film...
  
  The preloader movie has this code segment:
  
  _root. MyExternallyLoadedSWFMovieHolder.gotoAndStop ("Play");
  Stop();
  
  Play is the name of the frame 2. The problem is that frame of game is inside the sphere film, the code does not work.
  
  How can I have the rotando6.swf of lode code above but also load the game (frame 2) in the film of the sphere.
  
  I really really need help

  You do not give your sphere clip an instance name, but one was automatically assigned:
  _root. MyExternallyLoadedSWFMovieHolder.instance3.gotoAndStop ("Play");

  Above is not advisable, so open the source file for rotando6. Click your sphere clip, open the properties panel and type sphere_mc for the . So for your script, you would use:

  _root. MyExternallyLoadedSWFMovieHolder.sphere_mc.gotoAndStop ("Play");

• You will need to update the video card in my hp a1240n.

  We have an integrated video card, but I need graphis better to play better games. Can I install a geforce 8400 gs?

  Wisterial, welcome to the forum.

  Yes, you can upgrade to a PCI (NOT PCI Express 16 x or AGP) 8400 GS.  You have only three PCI slots.  Now for the things to consider.  You should check the power of the power supply unit (PSU).  You can do this by opening the case and by reading the label on.  The 8400 GS I found required a minimum of 300W.  If your PSU is equal or greater to 250W, this one would work.  Most of the manufacturers overstate the power necessary for the performance of their cards.

  There are many PCI cards available, but they are not very good for the games.  If you buy one, you should consider switching at least 2 GB of memory, too.  Crucial is a good place to buy it.

  Let us know if you need more help.

• I have a TravelMate 6592 G and you need to replace the video card.

  The original card is ATI Radeon X 2300 - H, which is no longer manufactured. Can someone tell me what the map is compatible now?

  Hello

  Unfortunately, you have a discrete graphics (Mobility Radeon HD 2400 XT) on the motherboard.

  This means that you need a new motherboard. It is not a graphics card for this model.

  Note:

  P/N: LX. TNE0Z.107

  Model: TravelMate 6592 G-602G16n

• Need advice on the video card / power supply upgrade

  OK, first of all I am a novice to PC. But I have a HP pavilion a6600f. I wan to be able to play games like Battlefield BC2 but graphics integrated card wont cut it. I checked some info and found what motherboard I have. Its a FOXCONN Napa HP P/N. There is a link to the Board of Directors in case it might help you to answer my question. http://www.cnsunnyit.com/products/HP-motherboard-KJ383-69002_78.html

  This motherboard is a card like a GeForce 7800 GT or ATI X 1900? These cards are what is suggested as a Minimum for this game. Also maps would require me to get a 400W power supply. The power supply can be changed as well? All the answers you may have would be great. Also remember that I know very little in terms of pc in order to keep its simple for a simpleton like me. Thank you!

  Hi 223fmj,

  You came to the right place.

  Yes, you can update your graphics card. More than all that depends on ports inside your PC.  Depending on your motherboard (HP) card , you can install PCI Express x 16 graphics cards.

  Here is a link to instructions on the adding/replacing a video card in your PC:

  http://support.HP.com/us-en/document/c01039210

  Here is a link to how to replace your power supply (with video):

  http://support.HP.com/us-en/document/c01356113

  And here is a link to the page for your PC that received instructions from replacement/upgrade of the other parts on your PC:

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=24311&tmp_task=useCategory&LC=en&DLC=en&cc=us&lang=en&product=3794742

  Let us know how it goes.

• I need to download the videos?

  Hi there, Adobe provides enormous resources for us to learn more about Flex, but they forget the people like who uses still a dial-in order to watch these videos. Watch them so are really painful. Where could I download this videos and also the pleasure of learning?

  For those who want to download videos easily:
  1. use Firefox to browse the tutorial page
  2. download the FlashGot extension for firefox ( http://www.flashgot.net/)
  3. If you click on a video it opens in a new window, at the bottom of the player window (low status bar to the right) a small diskette wil icon flashes, this way FlashGot inform you about the downloadable video file (in flv format)

  I propose also nice for work two app:
  1 Bitdownloader (www.orbitdownloader.com)-> FlashGot can transfer the download tasks to this Manager download and this way the downloads mutch more fast (because of the multi thread download)
  2. KMplayer ( http://www.kmplayer.com/forums/showthread.php?t=4094) -> a playet free medai multiplatform and multilingual to view flv files downloaded

  Those who want to download the pdf file, I suggest another Firefox extension:
  Download in format PDF (https://addons.mozilla.org/en-US/firefox/addon/636)-> with this plugin, when you click a pdf file (exatly a link to a pdf file) a question apears Panel, and you can choose to download the file. (his more quickly, that wait for acrobat reader to open them and then use the Save function under)

  Hope this is help for you.

  P.s.:
  Sorry for my bad English

  Kind regards
  Peter

• I need assistance with the follow-up of

  

  OK the video you can see on my youtube is that I need help. The video is actually in 1080 p and I don't know why, it's show in such a low resolution, but this isn't the problem. I need follow the gun and add value null to this track, after that, I want to add a red solid layer and bring back some of its opacity to simulate a laser gun sight. Then I tried to parent and SHIFT red solid to the track, the final product should look like what you see in the image. I saw a TON of videos on the follow-up and can not the result I need. the laser must follow gun I aim toward the top and bring the gun to fire. How can I do that..? Please someone help or link me a tutorial that you will find useful...

  You must follow two points on the gun, a front and a back if you get angle, scale, and rotation. Apply to null, then parent to your beam.

  It is so small and the background is so similar to the firearm that track will be difficult.

• Restart suddenly during the recovery of the video: how taking this action?

  I downloaded a movie from Hollywood on the Web and when I saw it on the media player - whenever it came to part - my computer suddenly restarted! I tried this three times and got the same result - a reboot suddenly exactly at the same place - as if there was a short cut. It played fine on my editing program - no error reported - and I fixed the problem by changing the scope of the problem, but I want to make at least an idea of how just watch that video could cause such a weird Marvel. Maybe something that has to do with WMP as an integral part of Windows?

  Thanks for any comments that you want to give me,
  Rob

  Hi Dr. - shi.
  in fact, the video card (more directly the pilot) is the most likely cause. Remember, a cause just the video driver is not a problem with a file does not mean that he will not be with each other. Without speculating too much, it's probably a dll file that needs updating through the video card drivers. I would suggest making sure your video drivers are up to date and your codecs. Do a clean boot, and rerun the film without any applications running in the background.
  Here are some links that should help you:
  http://support.Microsoft.com/kb/316992
  http://support.Microsoft.com/kb/331796
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=507
  hope this helps,
  Eddie B.

• Unable to play the video in Windows Media player

  Original title: Proplem in Media player

  Hi when I need to watch the video in Windows media player... it is impossible to open the video, he told me "" Windows Media Player encountered a proplem while playing the file. Please help me fast please... thanx you

  Hello

  I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. Since when are you facing the issue?

  2. you have any anti-virus installed on the computer program?

  3 are you aware of any changes made to the computer before the show?

  You can run the Troubleshooter to settings and check if it helps.

  You can also change the hardware acceleration and check.

  Try to reduce (or turn off) video hardware acceleration by doing the following:

  1. open Screen Resolution by clicking on the Start button, click Control Panel, and then, under appearance and personalization, clicking
  Setting screen resolution.

  2. click on advanced settings, click the Troubleshooting tab, and then click change settings.

  Note that some video card drivers do not allow allows you to change the settings.

  3. move the hardware acceleration slider to none to reduce or turn off video hardware acceleration.

  I also suggest you to run a SFC scan (System File Checker). This will replace the corrupted Windows files.

  Hope this information was helpful and let us know if you need assistance in the future. We will be happy to help you.

• How to change the video resolution (width) when editing?

  Photoshop CC

  I started a video project, selected a video format and broke into publishing. After work for an hour, I realize I lost the left and right edges. It seems that I have chosen a narrower format that I should have.

  How can I change resolution of 1920 x 1080 mid-project? I tried to create a new project of the correct resolution but cannot copy video editing from one to the other.

  Any ideas?

  Thank you very much.

  What is the source of the video you. All video clips are from the same source and have the same format? If so, why not just open the first clip in Photoshop and then add others in video editing.   When Photoshop open the first video he has the correct size of the canvas must be set.   Photoshop has a lot of vide0 presets, but you must use the preset that matches your video. Now, I know my Canon 1 4 mov files 1080 p video. So I could use the HDTV preset but when I do all the Photoshop seems to do is open a white background canvas 1920 x 1080 and add a few lines of guide. I don't know what the guidelines are and no video time is created I need to create the video and add my video. So rather than create a new document using a preset video I open just my first music video.  You will be fine many captured video on the web.  If you just open it in Photoshop, you have the right size of canvas,

  Using Image > canvas size, then setting 1920 x 1080 can recover your cropped off the coast of the image. I actually don't video much so I can't say for sute.