I need to swap a hard drive to retrieve data (one once the exercise)

Similar Questions

• I need to replace my hard drive in my Samsung laptop, I have windows 7

  I need to replace my hard drive in my Samsung laptop, I have windows 7. I want to reinstall it on the new hard drive running on linux but on install windows 7 on a virtual hard drive, how can I transfer the activation code

  In other words, you can't.

  Assuming that your edition of Windows 7 is the one that supports the transfer of a virtual machine (i.e. the upscale home and more)...

  You will need to do a clean install of the virtual machine, using the retail media and the key of the COA sticker.

  You may need to activate by phone.

  Note that Samsung have historically refused to provide any form of media except through a factory install. This means that it is almost impossible to install the original media for anything except the original disk, using the recovery partition.

  Download the SP1 update for your chosen language and edition of the links on these pages...

  http://www.heidoc.NET/Joomla/technology-science/Microsoft

  The links are for downloads from the server of Digital River run for the Member States.

• New hard drive and cloning Windows asking for the password and end the session

  Hi all

  Need help please. I just bought a Cavior of WD 1 TB hard drive. I have used Norton Ghost to clone my old hard drive again. Then I removed the old hard drive and another to start the system. Currently, Windows XP was asked to enter the password (in my old drive hard, there is no password entry required). When I press ENTER, the windows log.

  Also, I tried to log in after you have set a password using ERD Commander (locksmith). I get the same result, that is to say Windows log off after entering the password.

  I am at a loss on how to proceed from here. I do not have the CD Windows XP that I bought this computer a few years and did not remember receiving the Windows XP CD. I don't have the product key which is glued on the computer case.

  Help, please. I have to activate Windows again?

  Ghost allows you to create a backup "Image", and then restore the image to the new disk.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Any suggestions to clean the hard drive of personal data, so that I can give my laptop without security concerns?

  Any suggestions to clean the hard drive of personal data, so that I can give my laptop without security concerns?

  Richard's suggestion is about as extreme as you can get. Of course, it works very well and the data is not recoverable, but unless you have State secrets then it might be a little overkill. It is the only way to be sure that the data is destroyed, but 100%!

  There are programs such as (Darin of Boot and Nuke) DBAN or KillDisk which can erase the disc at the point where it would take massive resources (money, time and material) to retrieve all the data. Then, a new installation or Windows recovery would be needed. But you don't have to replace the hard drive. It is effective even against the pirates experienced more than 99.9%.

• Internal hard drive has all of a sudden the write Protection

  Hello

  My internal hard drive has suddenly developed the write protection and has resisted each of my attempts to change this. I found issues related to external hard drives, but have not met a subject that bears on the disk system hard to develop this problem.

  The last State of operational activities that are known:

  My main hard drive read/write functions were fine the day before. The only things I did today were the usual activities like browsing the web, watching videos, etc.. The only thing I did of note has been download a Steam game, which required the U-Play from Ubisoft. I installed the game and U-Play, so the game went very well. Then I played another game of steam which does not need U-Play, then attempts to transfer files on a USB key.

  Steps taken to solve the problem:

  When you try to transfer files, warning "the disk is write protected" appears. I thought that it odd, as I had never met this caveat on this PC before. I discovered that all the files in the C drive have been suddenly write protected. My attempts to solve this problem include:

  • Deactivation of 'Read only' file level and folder settings. The settings app doesn't seem to be a problem, but the moving folder gave the warning and she returned to "read only".
  • What allows all permissions for the users and system Admins for drive C properties > Security (I found it odd that users have all permissions, when I clearly remember all the usual permissions enabled previously)
  • Reboot/boot scan running for drive C to properties error checking > tools > error checking, which reported no error.
  • Opened as administrator command prompt and entering 'diskpart', 'list volume', "select volume #', disk clear readonly attribute, readonly attributes volume clear." The clear drive has reported a failure, while the clear volume reported a success.

  None of these steps have managed to solve the question of write protection. Might this problem be possibly related to the downloaded game, or the program U-Play from Ubisoft? Is there something that I missed? What can I do else? I have documents and files that have not been backed up, but I don't want to lose.

  Thank you for reading, any help would be appreciated!

  I'm really sorry for your time. The culprit is revealed to be the key USB is write-protected, not the drive internal (phew!). I guess I panicked a bit and don't think to test with another stick of memory, which transferred files very well. Problem solved, I'll just reformat the wobbly flash drive.

  Thank you for sticking with it, even when I probably don't have too much sense, you have been very helpful and patient.

• My hard drive is no longer present in the workstation

  I have a Western Digital 1 TB (external) hard.
  I use it 99.9% of the time on my Windows 7 64 bit computer to store photos and videos and backup important files.

  It was working fine until I plugged on a MACINTRASH to back up the files on this computer.
  It was a simple copy and paste from the MACINTRASH on the external HARD drive.

  After you copy the files of the MACINTRASH, I plugged it in my PC.

  My PC does not recognize my external HARD drive. I unplugged the power supply plugged in. Even with the USB cable. Restarted. Then would not restart my computer and windows is auto auto repair. Nothing.

  I have EVERYTHING unplugged and left like that for about 30 minutes. I have EVERYTHING plugged into my computer and turned on.

  Windows booted up fine. I plugged the external HARD disk and windows had this little icon telling me it was installing drivers. I was pleased to think that he would finally recognize my external HARD drive.

  Of course, he did not. The HARD drive does not appear in my computer. It appears in Device Manager, and disk management.

  Device Manager

  • Under disk drives it only lists as "WD".
  • My other discs it has a nice long name as "WD 7500AAK external USB device"
  • Under properties, it tells me cannot find the Volume information for the disk. (The first time I did before the reboot, he said that there are 0 MB of space on it).
  • She claims that the device is working properly

  Disk management

  • As a first step, it says that I must initialize my disc.
  • Now it is not even more appear.

  I don't know what to do anymore. I had this HARD long enough that I don't know that it's no longer under warranty. I've lost as many files. Please help if you can.

  My MAC does not recognize the hard drive either.

  I wish there was more to the story... but there isn't.

  Unfortunately - if * no. * computer to recognize the drive - it is UNLIKELY he has nothing to do with the PC.  If there is NO possibility of try you the drive on another machine (other that the OS X based PC and Windows PC you mentioned so far) - Please do.

  It could be the drive interface (area around the disc) and not the drive itself.  When you turn it on, do you mean this spin up and spin then just or are there other sounds one minute + after that it starts (except maybe it turns down to sleep)?

  If it's the box and not the reader, although it might cancel any guarantee you, culd you remove the disc and try it in another box / with an adapter or actually connected directly to (a single computer).  To you on that one - depends on if the data are the only (no backup) copy and your need OR if data is stored elsewhere (saved), and you should really just a scratch disk (and the drive is under warranty and easy to get replaced.)

  Don't forget: a backup deducted that you have at least two copies of data in different physical locations.  An archive is nothing more that a single copy of the data stored on reliable long-term media; However, it is just a copy and if it is lost, chances are that it is for the data.

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• I used my iMac as a hard drive backup to my macbook once. Now when I update to El Capitan he says that it cannot be updated due to being of a backup. How do I change the drive mode so I can update?

  I used my iMac as a hard drive backup to my macbook once. Now when I update to El Capitan he says that it cannot be updated due to being of a backup. How do I change the drive mode so I can update?

  If you use your iMac as a backup to disk using Time Machine look for a folder called Backups.backupdb.

  It's what keeps you upgraded your operating system, you must remove it.

  Copy everything first if you are on a different drive. It would be wise to create a backup of the iMac on another drive also.

  Check system preferences > Time Machine and make sure that the iMac is not selected as the Time Machine drive.

• How to import bookmarks Firefox to a hard drive in another PC Firefox browser? The hard drive containing the bookmark has been deleted from a computer whose mother is dead, but the hard drive can be recognized outside on the new computer.

  How to import bookmarks Firefox to a hard drive in another PC Firefox browser? The hard drive containing the bookmark has been deleted from a computer whose mother is dead, but the hard drive can be recognized outside on the new computer.

  See this support article:
  
  http://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

• Can I format HARD drive and reinstall Windows 7 on the Qosmio F60 without CD

  I think my hard drive is faulty on my F60 Quosmio so I want to reformat the hard drive to see if that will fix it. But I don't have the original packaging and the information with me at the moment so I don't know if it came with a windows 7 CD or not. Whatever it is, I don't have the CD.

  I found on the net that most manufacturer who deliver without CD include a "recovery partition" or "factory image partition" which you can access during startup. Anyone know if the F60 Quosmio comes with a CD or if she has this recovery partition or partition image factory? Or do you know if there is a way I can check if my computer is it?

  If you have more information about the formatting of the hard drive and reinstall windows 7 without the CD please let me know.

  Thank you.

  The laptop came with a Windows disc, because there is a Toshiba recovery disc Creator called tool which create the recovery disk.

  The recovery partition was available and it allows you to recover the laptop without the use of the recovery disk, but it does not work if the HARD drive has failed.

  Here's a nice HowTo on HARD drive recovery
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  So, if you n t have a recovery disc and can not recovery Notepad using HARD drive recovery, then you have two options:
  -You will order a new recovery disk
  -You must install Windows operating system using a disc of Microsoft

• When changing the 80 GB to 40 GB HARD drive, Satellite M40 does not recognize the drive

  Hi all

  Thanks for coming in! :)
  I recently source two-disc 40GB 2.5 "IDE and intended to run one of them in my Satellite M40.

  The problem starts here:

  (1) I took the original 80 GB hard drive & install the 40 GB hard drive
  (2) start and put in the Toshiba M40 recovery disk
  (3) display screen 'Y' for recovery blah blah blah thing...
  (4) then the screen shows 'cannot be installed because no hard drive found ".
  (5) I boot in the BIOS using F2-> F1, page 2 shows no hard drive

  (6) I try to use my own CD of Windows XP Pro, same thing (as in no hard drive found)
  (7) and the BIOS too show no hard drive found

  The two disk 40 GB is out of mobile work and they formatted it, partition deleted with NOTHING on it. They have also been tested on other PCs (using the converter) using WXP. Two of them work very well!

  Now, the weird thing is that I just can't make it work at least in the Sat - M40. Why is this? Toshiba locked the M40 being one Toshiba-disc is usable?
  Is there a place to get through it? Hidden BIOS?

  I have fixed a large number of PCs, but I can't with this, Please HELP...
  Any response would be appreciated, thanks! :)

  Hello

  The M40 should be able to use 40 GB hard drives with no problems.
  But you must use hard drives with the right interface.
  To my knowledge the M40 supports hard drives with an interface IDE (ATA-6).

  So be sure that your 40 GB HARD drive supports it.

  By the way; Check if your HARD drive supports the good master or slave definition.

• Elgato EyeTV - I copied my recordings on another external hard drive, assigned to this disk as the location of the Archive, restarted the computer, but the location of unpublished/are not recognized. (End of 2006 Intel iMac / OSX 10.7.5 Lion)

  Elgato EyeTV - I copied my recordings on another external hard drive, assigned to this disk as the location of the Archive, restarted the computer, but the location of unpublished/are not recognized. (End of 2006 Intel iMac / OSX 10.7.5 Lion)

  What do you mean by "assigned to this disk as the location of the Archive" is this something to do with the software you use?

  The drive is formatted for Mac?  Menu go to menu, click Finder go > utilities > disk utility > click on external drives partition - format it sets out Mac OS X extended.   Otherwise, to save the files on the disk and ease than Mac OS

  

• I was told that 3 TB hard drive is not as reliable as the 2 TB drive. True?

  I was told that 3 TB hard drive is not as reliable as the 2 TB drive. True?

  Not true. What fool told you that?

• Recovering data from hard drives of laptop data

  1. laptop computer work with a hard drive to work (I know that this is the case if you insert the disc of the laptop, it works, it loads windows xp, you can use the laptop according to the normal without errors / problems etc.)

  We have a disk external drive kit (again I know works as I use to connect to a multitude of other hard drives via the USB port of a desktop PC) and I have another kit to different hard drive for the first USB SATA hard drive recovery kit and it does the same thing when you try to access the data on the hard drive for laptops

  If I connect the laptop hard drive to my desktop PC it won't appear in my computer even if you right-click my computer--> manage--> disk management

  The drive appears here as not initialized and will fail if you try to initialize the disk indicating there CRC errors and it will not assign a drive letter.

  Is there a quick way to access the data on the disk?

  As much as I know readers are not encrypted as when loading after the bios POST, you get not all blue / violet loading gauges, this is Windows XP SP 3 so do not use bit locker or something like that.

  What should I do to get access to data as quickly as possible without making too many steps or waiting for utils recovering data, etc..

  Also, what do Lenovo for the drives causing headaches as much?

  Am confused with your part external kits...

  In any case, I assume you have a computer laptop lenovo work and office work. You try to connect lenovo's HARD drive in a USB drive kit and extract data from the desktop.

  (1) is the disc encrpted HARD lenovo? Check the Bios and also if lenovo security software are installed.

  (2) the fastest way I'm doing it today is to connect laptops and office to a network. Share the disk, and then extract the data from the laptop or desktop. A second option is remote laptop and retrieves the data.

  (3) another possibility is that your laptop is XP, IE the formatting isn't AHCI (check the bios under sata), it is in compatibility mode. The Office use Vista or Windows 7?

• My office wouldn't boot and I received a S.M.A.R.T. message that told me that the hard drive was bad. I changed the hard drive, but it is always the same. It is running windows zp.

  My desktop computer running windows xp. It begins to start but stops and keeps trying to start. It does not start in safe mode or any other mode. I have mfoundm a message that says S.M.A.R.T. and told me that my hard drive was bad. I replaced the drive hard drive with another drive that has been loaded with xp but it stil is.

  I think that the answer to the replacement hard drive is in your question.

  I replaced the drive hard drive with another drive that has been loaded with xp but it stil is.

  You can not take a hard drive that was in another computer when the Windows installation, place it in another computer and boot from it. You will get a boot loop. It will start to load Windows then suddenly, re - start. This will be repeated again and again. You must install Windows on the disk hard while it is in the computer that you intend to use it with.