Need your expert help...

Similar Questions

• I need your urgent help

  I need help to solve a problem, I met when working on a laptop of Omatek that had a problem starting. So I decided to format, but the CD ROM drive had a problem so I decided to format it with a computer toshiba laptop, install the same operating system that was windows XP and it worked, but it created another problem when I took the hard drive of the laptop Omatek bak, he refused to start completely as it will start the start and turns off because it displays an error message that he met a problem. So I decided to fix the CD ROM drive in the laptop of Omatek to reformat, but every time I start the sytem and try to format, it will tell me that it cannot find any disk hard even if my configuration also shows that it clearly identifies my hard drive and the CD ROM drive

  The Windows installation CD is ill-equipped to deal with SATA drives, and this is why it does not recognize the HARD drive.

  You will need to enter the BIOS on the system and temporarily change the access mode to the HARD drive to something that includes the installation of XP CD, install your XP, then you can change the BIOS settings back to what they were before you changed.

  This means that if you make settings of the BIOS, you must write them, so you can change them back.

  Here are my instructions for general use for these situations:

  When you see messages like this:

  Setup cannot continue.  To quit Setup, press F3.

  or

  Setup did not find any hard drives installed in your computer.

  Make sure that the hard drives are powered on and properly connected to your computer, and that any hardware configuration of the drives is correct.  This number involves running a diagnosis provided by the manufacturer or the installer.

  When you see a message like this, obviously the XP installation starts to load, but then when the installation program needs to go out and find your hard drive is not find the hard drive.  It means not necessarily your hard drive is defective and if it worked before, it's probably still plugged.  It simply means that the installation of XP is not able to find it.

  Looks like you need enter the BIOS on your system by pressing the 'Delete', F2, F10 or F12 key (what the key is good for your system), find the section where the types of hard disks and hard disk interfaces are configured and temporarily change the setting so the XP installation is able to find the hard drive.

  Where to find the accommodation and how to change depends on your system manufacturer and the version of the BIOS, so you end up having to look at her.  If you know your system brand and model, we can probably help you find a job.

  You must locate and change the interface mode to your hard drive in the BIOS so that when installing XP loading, it will be able to locate the hard drive.

  Before making adjustments, you should take note of what are the current BIOS settings, so you can change when you are finished.

  The adjustment varies so here are some examples that I have accumulated:

  The adjustment is done in the BIOS and could be in Integrated Peripherals, Configuration of SATA, SATA Mode device.

  Make a note of what the current settings are so you can change them back if things get worse before making any changes.

  After you make the changes, save them and see how things look now.

  If you find that the mode is set on the RAID/SATA mode, change the IDE mode.

  If you find that the mode is set to SATA, change the IDE mode.

  If you find that the mode is set to SATA, SATA mode off.

  If you find that the mode is set to AHCI, change the ATA mode.

  If you find that the mode is set to AHCI emulation Mode, change the IDE emulation mode.

  If you find that the mode is set to SATA, SATA mode off or change the ATA mode.

  If you find that the mode is set to SATA Native Mode, disable the native SATA Mode.

  If you find that the mode is set on AHCI/RAID Autodetect, change the combination mode.

  If you find that the mode is set to automatic RAID/AHCI, change it to RAID Auto / ATA

  The WWW says it works on some Dells: "I had to put my SATA ATA instead of AHCI operation."

  After completing the settings, ACCEPT and SAVE changes and reboot the system and see if it will now boot on the CD from Recovery Console.

  Here are some additional ideas on changing the BIOS to recognize the SATA drive to boot and install from CD:

  http://www.mydigitallife.info/common-troubleshooting-methods-when-OS-install-unable-to-detect-SATA-harddisk-drive/

• Pls need your urgent help - DVD player is broken

  In my laptop LG was broken device, model - Toshiba sd-r9012 DVD-CDRW, it has only 9.5 mm thick, ultraslim, and I can't find the place to buy it in Moscow.
  Would you like to sell me this device or compatible with it devices (dvd - rw or dvd-cdrw internal) advice?

  Best regards
  Evgeniy Pavlov

  [Edited by: admin August 20 05 14:13]

  Hello

  You can contact the SAV Toshiba partner in Moscow. I'm sure they can order this disc for you. Otherwise you can contact the manufacturer of the laptop computer and ask them which drives are compatible with it.

  Check out these pages
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true
  http://www.Toshiba-Europe.com/EU/contact/details.asp?group=by+country

  Good bye

• Yahoo mail compose page announced the Indian Railways. Same is the case with some Gmail site. For this reason, it is difficult to compose mail. I need your help to clear advertising so that I can compose mail on the blank page, cordially. Maes

  Yahoo mail is normally empty. One can type mail in the blank part of . In my case the Compose page has rail logo. because I can't type my mail. Even if there is no problem in gmail-INBO isn't the case with Gmail site "A Google approach to email" or make up may site.
  For this reason, it is difficult to compose mail on yahoo mail. I need your help to clear advertising logo so that I can compose mail on a white page, cordially. eldiablo kumar

  You can also try to install Adblock Plus with Easylist subscription and check

  • https://addons.Mozilla.org/en-us/Firefox/addon/Adblock-Plus/

• yesternight I tried to improve my S5 iphone for a new virsion so at the end he asked me my icloud and the password I remember my password but not my icloud so I need your help please

  Yester night I tried to improve my S5 iphone for a new virsion so at the end he asked me my icloud and the password I remember my password but not my icloud so I need your help please.

  Seems that Apple has temporary problems with their activation servers. Many users report similar problem on older devices.

  Latest news: If you can not activate your iPhone, iPad, or iPod touch after installing iOS 9.3 - Apple Support

  r http://www.IMore.com/Apple-Working-iOS-93-Fix-Older-iPhone-iPad?utm_medium=Slide & utm_campaign = navigation & utm_source = im

  lder-IOS-devices-affected-by-bricking-bug/ http://9to5mac.com/2016/03/24/Apple-releases-New-Build-of-iOS-9-3-for-Users-of-o

  Hoppefully Apple will highlight the top soon.

• buy an iphone 5s by amazon and I came with iCloud blocked an account... {I called the seller and does not that I do that I'm from Venezuela please need your help}

  buy an iphone 5s by amazon and I came with iCloud blocked an account... I called the seller and does not that I do that I'm from Venezuela please need your help

  No one here can help you. The device is locked activation. Since you have made the purchase by Amazon, you can check with them to see if they will stand behind it. No one on the forum, or Apple can help you remove the lock. Only the previous owner can do this. I suggest that you demand a refund, so let's start a claim with Amazon about this dealer.

• Please I need your help in the next issue.

  Please I need your help in the next issue.

  I'm trying to change a driver of function generator to perform the following operations:

  starting with the initial value (for example 1 MHz) for some time (for example 10 sec.) and turn off the output for another time (e.g. 20 seconds) and then start again but this time with the frequency increment value (for example 1 MHz + 0.1 x n MHz = 1.1 MHz for n = 1, 2, 3,... n).

  The function generator model is ag33xxxGPIB and the link of the driver is http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9066659CE034080020E748...

  There is no modifications are required for the driver, although there might be an example that you can edit. You use the function of the frequency set in a loop with a shift register. Initialize the registry to offset with the frequency of your departure and each iteration of the loop, add the value of the step. Exit the loop when the stop frequency is reached. Try to write something and after back if you have any problems. Fix what you wrote.

  It's pretty basic LabVIEW code. Did you do the online tutorials?

• Pavilion 15-n200nx: I need your help

  Hello group HP I need your help on activatin windows I update my laptop for windows pro 8.1 build 9600

  but is not yet activate every time I open my computer laptop theres always notification that I need to activate my windows

  notification require a product key... I have need of your immediately

  Thank you.

  Hello
   
  The key is in the BIOS of your machine, please use the following tool to get:

  http://www.Belarc.com/free_download.html

  When running this tool, it produced a report, scroll to the section of software management. Product key Windows 8 or 8.1 is there.

  You can also use the following tool to discover:

  https://www.magicaljellybean.com/KeyFinder/

  Kind regards

• I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)

  I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)

  Hi ddbowers01,

  The other shortcut keys work?

  Try pressing CTRL + ALT + DELETE and then try to lock the computer and check.

  Check the setting below:

  a. in the Control Panel, click user accounts.

  b. click on change the way users log on or off the power.

  c. Click to uncheck use the screen of welcome for a quick and easy connection.

  d. click OK.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need your help. I forgot my administrator password.

  I can connect to my laptop using the standard user account. My problem is I can not change the security settings, tune up and download any program, because somehow the administrators password has been changed and forgotten and I have not a flashdrive password key. Please I need your help.  I'm not knowledgeable enough to solve computer problems.  Is it possible to recover or reset a new administrator password?

  Hello

  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please see the sticky below:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Thank you

  Keith
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I want to run or install my HP Laserjet P1006 printer to work on my system without the software freely, I have misplaced the software please I need your help.

  Hello Sir,

  I want to run or install my HP Laserjet P1006 printer to work on my system without the software freely, I have misplaced the software please I need your help.

  Thank you

  Alex

  You can download the software here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3435683&lang=en&cc=us&prodTypeId=18972&prodSeriesId=3435682&TaskID=135

• I really need your help. How about this one-CNU0092BPK

  I really need your help

  Hello

  In this case, you must enter e9l11o7p2s (3rd character is a lowercase L) to the password screen.

  Kind regards

  DP - K

• Can someone tell me please how to fix programs icon who turned into VLC player? I really need your help guys as soon as possible...

  

  Can someone tell me please how to fix programs icon who turned into VLC player? I really need your help guys as soon as possible...

  From what you have stated above, I think that the file association for LNK files has been given misdirection to the VLC Player. I've seen this happen when opening a program via a shortcut (for example. LNK file), you are asked what type of program to open it with. After selecting the VLC Player (or another program) via the Select a program from a list of programs installedand check always use the selected program to open this type of file (circled in red below), the document or program referenced by the shortcut of origin opens in VLC Player as it should.

  

  The problem is that now all shortcuts (for example. LNK files) on the desktop or in the browser will want to be opened by VLC Player and VLC Player icon to view the shortcut no matter what shortcut was originally intentioned to open. This is known as a file association and the default icon. The same condition can occur if you have performed these actions 'Open with' on one. JPG or even a. EXE, but the. LNK explanation is much more likely for the items on the desktop.

  The good news is that a small free utility was written to cancel the. LNK file association was created. There is also a registry hack to achieve, but I recommend the utility unAssoc for its ease of use. I used to send people on another site to download this utility, but this site has become confused with all the ads and fake download links. I put a copy on own OneDrive here.

  

  Just download, then use the utility to unassociate the. LNK files for the user or globally delete the file type and let windows rebuild a new default.

• Update of Windows need your help

  Dear community (Microsoft)

  I'm on Windows 8 Pro Edition: © 2012 Microsoft Corporations. All rights reserved, I'm getting a massage, at random, every 4 or 5 seconds of my computer, windows update:

  "Windows Update needs your help, windows Update was not able to verify the new updates for the last 30 days. Go to windows Update to resolve this issue. "

  but I swiched windows update "check for updates but let me choose whether to download and install them" I don't want to upgrade my Windows now... I can't work like this massage coming on screen, yet and still now I can't send a screenshot, please help.

  System Configaration: windows 8 pro

  32-bit operating * 64 in Prossesor

  Hello

  You can click here on how to stop or hide the notification for Windows Update. If you want to completely delete or prevent Windows Update, you can click here and find the solution posted by "Mayank Gupta10".

  Kind regards.

• Hello... I need your help... Buy a license and do not know if I use it since all the programs you download testing me and departs to download a specific application (Flash) asked me identification information, he placed and are not valid. There are other

  I need your help... Buy a license and do not know if I use it since all the programs you download testing me and departs to download a specific application (Flash) asked me identification information, he placed and are not valid. There are other credentials?

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "