I noticed in my system properties that the system restore is turned off. Should it be on?

Similar Questions

• System Volume Information folder 23 GB even when system restore is turned OFF. All backups shadow removed

  Dear users,

  I am facing a very strange problem and I tried to solve this problem for more than a month, but no use. I called the Support technique Microsoft in India and they send me the details to email customer support to get this addressed redirected.

  QUESTION to the folder System Volume Information in Windows 7 is 23 GB of my SSD. My SSD capacity is 120 GB. If this space takes more than 20% of my total space of SSD.

  

  I turned off the system restore feature and it is noted below.

  

  The system restore is turned off as shown below

  

  Space Ghost maximum allocated memory is about 500 MB. There is no current backup shadow

  

  CAN U PLEASE HELP ME TO RECOVER THE PLACE OF 22 GB WHICH IS ALWAYS PRESENTED AS TAKEN TO RESTORE SYSTEM FILES? EVEN AFTER THE RESTORATION OF THE SYSTEM AND BY REMOVING ALL THE BACKUPS OF THE SHADOW, I'M NOT ABLE TO RECOVER THIS SPACE 22.7 GB

  I'll have a 120 GB SSD and more than 20% of the space is getting lost here

  I am running Windows 7 Professional 64 bit on a Dell E6220 laptop

  No virus / Trojan horses and system completely clean. Looking for Solutions...

  Run the Disk Cleanup Wizard (be sure to include system files)

• System Restore will turn off by itself.

  It happened, but rarely and without apparent cause or sequelae. Larely, it was repetitive, once again no reason apparent, but apparently interconnected with the sudden disappearance of HP Quickplay, also by itself. My two scans, MSE and MBAM didn't pick up malware.

  I have since restored to an even better version PS. My PC works fine without apparent probs.

  I checked SR seconds ago and it is powered and creating RP of as usual.  But an individual isolation of SR is very troubling. How prevent it from happening again?

  Hi Coolnewyorker,

  Thanks for posting in the Microsoft Community. I understand that the system restore will automatically close on the windows vista computer.
   
  I apologize for the inconvenience and no need to worry I'll be more than happy to help you.
   
  1. What antivirus application do you use on the computer?
  2. did you of recent changes to the computer before this problem?
   
  Follow the steps and check if that helps.
   
  Method 1
  Check the status of the shadow copy volume service. If it is, then try to restart the VSS service and check.
  (a) click Start, type services.msc in the start search.
  (b) search for the shadow copy Volume service.
  (c) make a right click on the Volume Shadow Copy service (VSS) and select Properties. Check if it is started.
  (d) if it is stopped, select start or restart. Make sure that the service is started and set as automatic.
  (e) click on apply and OK, if you make changes.
   
  
  Method 2
  You can also try temporarily disabling computer security software and check if it makes a difference. If the system restore works fine after you turn off the anti-virus, you can contact the manufacturer of security software and check if you need to change the settings
  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
   
  
  Method 3
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135
  Note: After you have performed the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startup mode.
   
  Let us know the status of the issue and if you need help I'll be more than happy to help you.

• When he tells me that the print spooler is turned off, where I'm going to turn it on?

  my printer works, now every time I try to print anything it tellsme the local print spooler service does not work, restart the spooler or restart the machine.

  How can I restart the spooler?

  Hello

  ·        You did changes to the computer before the show?

  ·        You receive an error with the error code?

  ·        What is the number and model of the printer that you are using?

  Method 1: I suggest you run the fixit from the link and if it helps:

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us?EntryPoint=lightbox

  Method 2: You can also try the steps from the link:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  Reference: Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• WiFi 802 1704 1.1... is not work after activation of the window of udating to 8.1, but showing an icon of a red cross on the icon of the adopter. When troubleshoted showed that the wifi compatibility is turned off

  What should do?

  ali_ahsan,

  To activate the wifi you press F2 or FN + F2. You can also go to the mobility Center in Control Panel to turn on the wifi as well.

• I am trying to copy photos to a CD - RW disc nine, the message indicates that the disk is write-protected, what should I do.

  I am trying to copy photos to a CD - RW disc nine, the message indicates that the disk is write-protected, what should I do

  Hello

  You can follow the steps below to solve the problem:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  1. click on Start, typeregedit in the Start search box and press ENTER.

  2. navigate to the following key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
  
  3. If the key exists, go to step 7.

  4. in case the StorageDevicePolicies key does not exist, you must create a new.

  a. right click on the empty field and select new > key.

  b. name the new key as StorageDevicePolicies.

  5. turn on highlight StorageDevicePolicies, and then create a new DWORD called (32-bit) as WriteProtect.
  6. double click on WriteProtectand set its data value to 0.

  7. If the key already exists, double click on WriteProtect and change its value from 1 to 0 to allow write access.
  8. exit the registry editor.

  Check whether the problem is resolved.

• Cannot use Wake on LAN, unless that "allow this computer to turn off the device to save power" is checked

  Wake on LAN - power management

  On my Media Center PC, I am unable to use Wake on LAN unless "allow this computer to turn off the device to save power" is checked (in the tab power management of the adapter in the Device Manager). "Allow this device to wake the computer" and 'Allow only a magic packet wake the computer' is checked, but become grayed out when "allow this computer to turn off the device...". ' is not checked.

  The problem is, Wake On Lan doesn't work unless the computer has been asleep for a short period of time. If I try to activate the computer using WOL after about 10 minutes, he never wake. I guess that's because "Allow this computer to turn off the device to save power" is checked, the machine is before turning off the network adapter.

  Is it possible to force the computer to disable the NETWORK card, but would retain the capability of WOL? Or ensure you THAT WOL works little regardless of how long the PC has been asleep?

  The machine is a Windows 7 PC with a Nvidia nforce network controller.

  By the way, I have a laptop on the same cable network that has all three items checked in the tab for its NIC device power management, and this machine can be awake at all times using WOL, regardless of how long he has been asleep, this issue must therefore be with the configuration of the Media Center computer.

  I would be really grateful for any suggestion, I spent a lot of time trying to get this to work!

  See you soon

  Hello

  If the systems are only a sleep you don't need a magic packet.

  If computers are set to wake on any network traffic all Ping or arp will wake them up.

  For this configuration, it is best to disable the saving of NIC.

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------------

  Real means WOL shut down a computer on Hibernate real position, http://www.ezlan.net/WOL.html

  However as these has involved the PSU cooperation. Motherboard. Network card and are not considered critical by the industry for the user end is a YMMV situation.

  12 Desktop who are under my immediate control (mix and match brands and processors). Only three are fully compliant and properly awake.

  Three satisfied partially, the rest don't care my desires/needs of Wake on LAN.

  On the positive side, since it is now fashionable to go green, the percentage of new computers that keep the better sleep habits significantly improved.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• When I entered my serial number to activate Photoshop CS4, it said that the number is not valid. However, the customer service Adobe told me that the number is valid. What should I do?

  When I entered my serial number to activate Photoshop CS4, it said that the number is not valid. However, the customer service Adobe told me that the number is valid. What should I do?

  Error "serial number is not valid for this product". Creative Suite

• I recently bought Lightroom and installed on one of my computers. I tried to install the program on another computer, I, using the same serial number that I already bought and I am not accepted as it says that the SN is invalid. What should I do?

  I recently bought Lightroom and installed on one of my computers. I tried to install the program on another computer, I, using the same serial number that I already bought and I am not accepted as it says that the SN is invalid. What should I do?

  It is possible that you downloaded the demo of creative cloud of Lightroom. The perpetual license key will not work. Uninstall the version on the second computer, it doesn't bother your catalog, preferences and personal files.

  Download the appropriate version from the link below and install them, your license key is accepted and everything will be fine.

  Updates

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

  Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

  He broke. Make an appointment at the genius bar and get it fixed / replaced. There is no magic words that will do well.

• Computer froze cannot open any programs or even to use the Start button to turn off.

  Original title: the computer froze.

  Original title: my computer (Windows XP) has frozen. -Big problem -)

  Hello

  Last night, I used my computer to open a load of bunch of programs of MS Access (probably asked to run a marathon when he can only walk!)

  Now, I can't open any programs or even to use the Start button to turn off. How can I fix this problem or you have lost everything :-(

  Thank you

  Thanks - all of a sudden he started working again! Maybe this was a vacation - but I tried F8 and safe option is not come to the top.

  Very old computer - but it is useful to use to return to historical documents that I don't want on my new computer.

  Tnanks for the long and dedicated response :-)

• license on the old PC to turn off and turn on the new PC, or unlock.

  In June 2016, I installed 6 Lightroom on my old PC to get. After about 1 1/2 months, adopted throughout the system and I had to get a new PC.
  
  All the programs have been installed on the new PC also Adobe Lightroom 6. When you start the program, the message this program or this serial number is still active on another PC.
  
  Like the old PC cannot be brought back to lifeI ask you the license on the old PC to turn off and turn on the new PC, or unlock.

  You must contact Adobe.  This is a user to user forum.

  Use the chat here:

  Contact the customer service

• just installed thinkpoint... now, the computer does not turn off

  Hello

  Downloaded thinkpoint... now the computer does not turn off

  never had this problem before.

  Hello

  Downloaded thinkpoint... now the computer does not turn off

  never had this problem before.

  ThinkPoint can be a virus, google for info also run superantispyware and av prog.

• I'll go the Mac of the victory, I can turn off my Adobe products in Win and turn them in Mac?

  I'll go the Mac of the victory, I can turn off my Adobe products in Win and turn them in Mac?

  Lars-Olof

  It depends on what products are - can tell you which?  If they are products of creative cloud then Yes, you can use either platform (or both) for a subscription to creative cloud.  If they are produced Creative Suite, so it becomes less likely.  If they are produced CS6, you can request a one time platform swap.