just installed thinkpoint... now, the computer does not turn off

Similar Questions

• Could not open the film downloaded, Chrome tabs are not open and the computer does not turn off

  I downloaded a movie from torrent and tried to open it, but it did not open, and now I'm still not able to close the downloads tab in chrome page.google does not open also. more my pc isn't even close. Please resolve these issues. It's very urgent!

  Original title: pc problem. URGENT

  Malware can stop security to run programs.

  Have you tried to use these programs in Mode safe mode with networking that I advised you of? :

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  "The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before starting Windows (press F8 at the rate of about once per second)"

  Also, follow this step:

  Once in Safe Mode with network, download and run RKill before the scan with these programs.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  See you soon.

• I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  1. did you remove Bootcamp using disk utility?

  2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

• My computer does not turn off, it crashes on closing.

  My computer does not turn off, it crashes on closing.  I have to press the Start button, in the hold, and then after 20 seconds it turns off.  Often when I turn on the next time, it sometimes says Windows is not stopped successfully, but I know that all my programs had been closed.

  My computer is Dell and my package is Windows Vista.  I have McAfee security set up and I bought Uniblue to try to help, but not joy.

  I wouldn't use anything done by Uniblue, it does not work. It will make things worse.

  I would like to uninstall Mcafee, and then use the removal tool to remove it completely. Install rather program AV from Microsoft.

  If you need help I see what is running with teamviewer. You'll see what I'm doing. If you get this, give me the ID and the password. So I can log in. Or if you use Skype, add me. My Skype name is the same name I use here

• installed the latest updates of windows 7... now the computer does not recognize my video files avi... says "format not supported".

  I have installed the latest updates (02/27/10) and when I open sony vegas to edit some files avi... they were offline... when I tried to read with windows media player it says format not supported... before when I played these files, they would not have to synchronize audio... it never happened with my other computer with Vista... system restore solved the problem of format not supported... but so far has caused this problem? and what about the problems of synchronization? the files seem to sync when played with the hp program...

  Hi derlonewolf,
   
  Because you performed a System Restore you would not be able to determine which update problem from occurring. You will have to wait for the update to your computer to determine the update that caused the problem. The update does not necessarily cause the problem to occur again. However, you can view the history of updates to updating history.
   
  1. open the control panel (all items view), and click the Windows Update icon.
   
  2. click on the link to view update history.
   
  3. to view the details of a single Windows Update-
   
  (A) select and right-click on a Windows Update list, and then click details.
   
  (B) click on close when finished.
   
  As far as the question of timing is concerened, you can scan SFC on your computer and check if the problem persists.
  
  Steps to perform a scan SFC:
   
  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
   
  2. type the following command and press ENTER:
  sfc/scannow
  [The command sfc /scannow. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions.]
   
  A message appears indicating that "the system scan will start. Be patient, because the analysis may take some time
   
  3. If all the files require that a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue
   
  4. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
   
  5. once the scan is finished, close the command prompt window, restart the computer and check.
   
  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833
   
  You can also make manual updates instead of automatic updates and then see what are updates will be installed on the computer.

  See : http://windows.microsoft.com/en-us/windows7/Turn-automatic-updating-on-or-off

  Post back with the status

   
   
  Aziz Nadeem - Microsoft Support

• ProBook 4320 s: computer does not turn off

  Hello

  A few days after the last update of window 10 s can not turn off.

  She can go sleep, but turn off the result probook on reboot.

  Ask for advice

  Tanks

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close windows open and stop the laptop by right clicking on the icon in Start Menu, select (Admin) command prompt and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start the laptop and let Windows take over completely for a few minutes before checking if it is now shut down properly in the Start Menu.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• I recently had a new hard drive installed in my 2008 iMac. I'm trying to re - install office and the computer does not recognize my password. I tried all the passwords I can think of and nothing works and it wont let me continue

  I recently had a new hard drive installed in my 2008 iMac desktop computer, because right now I can't afford a new computer.   I am now under OS X El Capitan 10.11.4 and my password no longer works so that I can reinstall office microsoft for Mac.  I'm trying to change my password, but you must enter the old password and it does not recognize the password.  I tried every password I use and nothing works.  How can I change or get a new password?

  Reset the password.

  OS X 10.7 Lion, Mountain Lion, Yosemite 10.9 10.8, Yosemite 10.10 and 10.11 El Capitan

  Shut down the computer.

  Start the computer, and then press on and hold the command key and the R key to boot from the recovery partition.

  When you see the Apple logo, release the keys.

  Wait until the OS X Utilities window appears.

  Move the mouse pointer to the bar menu at the top of the screen, click on "Utilities" and select "Terminal".

  in the menu dropdown.

  Terminal window is displayed.

  TypeRegeditdans resetpassword and press enter on the keyboard.

  Reset Password Utility window will open.

  Leaving the Terminal.

  Select Macintosh HD, if not already.

  Select the user account in the menu popup box under "Select user account.

  Enter a new password.

  Re-enter the new password for the user.

  Enter a hint.

  Click on the Save"" button.

  Click  in the menu bar, and then select restart.

  Open a session.

  When Keychain dialog box appears, select "create new keychain".

• Uninstalled McAfee, now the computer does not start - crashes at MUP. SYS

  Hi new to the forums here - I'm pretty desperate at this point - here's the game:

  I guess that the problem lies with the uninstall - never had any problems before and did a reinstall of fees<1 year="" ago. ="" computer="" is="" only="" used="" as="" htpc="" and="" occasional="" web="">

  McAfee, asked me to reboot after uninstall so I agreed.  I assumed that I would run the McAfee removal tool once the computer has been restarted, but now my computer freezes right on a black screen after the initial startup.  When I boot in safe mode, the computer hangs on the last file MUP. SYS.  I have left on all night, still will not get past the MUP. SYS

  I have run chkdsk and found 0 errors.  I also followed the indications of MS here: http://support.microsoft.com/kb/307545 does not.  I used Hiren boot and back up my data.

  Running XP MCE 2005 cumulative 2 - SP3.  The computer is a Sony Vaio - so I did not have a full XP disk, only the recovery discs (thanks to strip sony!).  I downloaded a copy of the recovery console which I can boot to.  Is there a way I can run the MCPR.exe since the recovery console?  What else could be the cause? Thank you very much!

  PS I also unplugged all devices except for my keyboard and mouse.

  Unfortunately I do not know which files to delete McAfee.  I guess there could be hundreds of them.

  I sincerely apologize for bad reading you post. The problem was more than likely caused by the process of uninstalling McAfee. Hang up on MUP. SYS actually has nothing to do with the Ministry of the INTERIOR. SYS file. It is simply the last file loaded by windows when an attempt to start in safe mode has been selected. There are a number of issues that can cause this error. As I said above, in your case, it was likely to McAfee.

  Follow the instructions below carefully to perform a restore of the system using Microsoft Diagnostics and Recovery Toolset (MSDaRT). You will need a computer to work with a working cd rom and a dvd/CD blank.

  Download and install ISO Recorder version for the operating system of the non-working computer to work.

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download and install the Microsoft Diagnostics and Recovery Tool to the work computer from the link below, choose the default installation during Setup.

  http://www.Softpedia.com/progDownload/Diagnostics-and-recovery-toolset-download-100885.html

  CD blank insert in your cd/dvd burner. Navigate to C:\Program Files\Microsoft Diagnostics and Recovery Toolset and right click erd50.iso, select and then copy the image to a CD . Follow the instructions in this link to complete the creation of the bootable cd.

  http://isorecorder.alexfeinman.com/HOWTO.htm

  Once completed, restart the PC with the cd in the drive and start over the cd to verify that it works correctly. If successful in the computer non-Boot.

  Boot with the cd and when prompted, connect to the operating system (should show C:\windows).
  

  Once connected, click Start > system tools > system restore
  The interface of the system restore opens where you can choose to restore the system to an earlier time.
  

  Select the restore point, follow the guests and restart when prompted, remove the cd during the reboot.

  Kind regards

  Joel
  

  Sometimes to decide what battles to fight the toughest battle of all... Visit my forum @ http://repairbotsonline.forumotion.com/forum.htm

• Delete system 32 files, now the computer does not work.

  Hi all, I received a virus there is a day of a program called Internet Security 2010 for me (I think it's an advanced antivirus remover or something a long these lines..)

  In the case, I did a scan of the system with AVG and BitDefender, nor presented with something else that the virus still persists. I took to google and then made to spybot, once you have downloaded and installed, spybot was the source of my problems and showed that helper32.dll and smss.exe in my System32 folder where the two infected. Knowing this, I deleted both of these files, but some issues (such as Mozilla blockin automatically to sites like facebook)... I advanced and downloaded malwarebytes. ... I run another scan encounted three more errors, helper.dll has been infected, still, so I tried to delete it once more, but I need permission to do so.

  In a stupid gesture, I moved into my office, almost desperately tryin to get rid of, renames, tried to remove it, permission, so now there remained
  I've renamed helper32.dll and put back into System32 filefolder. I also downloaded Microsoft Security Essentials.

  In the case, something, I think in my registry, or maybe in my services I messed up, because whenever I connect to my computer, I get a popup of the saying of the toolbar "Windows could not run services" and something to reject llimited to users to access certain things. " In addition, my internet does not connect and says "service incorporate or group does not" or something of the sort.

  I have remove the somethingI wasn't supposed to? How can I change? In addition, the system restore will not work and keeps telling me an unknown error occurred and tells me to pick another point to restore, but says that with every point, I try to restore, as well, I have no backup of windows.

  For the record, I am running Vista 32-bit Home.

  Can someone help me?

  Hi Anarchoi,

  You are able to get to a command prompt?  If so, run SFC/scannow to replace missing or damaged files.  Let us know if that helps.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When stopping down to the EXP get the message "rundll.exe program does not ' and computer does not turn off. How should I do?

  Can't stop it to exit the mode and get the data message may not be saved.

  Hello

  Windows operating system you are using?

  Step 1: You can check if the same problem occurs in safe mode with network.

  Please follow the link on how to start the computer in safe mode with network below.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  For reference:

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Let us know if that helps.

• Computer does not turn off: encounter error on update Ms.

  It is a XP Pro laptop.  During the shutdown, while trying because of the updates, I get an error message "NDP1.1sp1 - KB2416447 - x 86 .exe has encountered a problem and had to close.  Computer then does not close.  How can I fix it?

  Remove the .net framework 1.1 Sp1 with .NET Framework Cleanup Tool :

  http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx

  install .net Framework 1.1 Sp1 again and install the update again.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows 7 after the judgment does not turn off

  When I make a stop in Windows 7, it seems to stop, but it does not power the computer off.  I can then manually off (button for 4 seconds).  When I turn on and start Windows my (race mirrored) raid begins a check and fix (takes forever).

  Here's what does not (believe it or not):

  1. Can I do a restart of Windows 7 - it works fine, no problem, raid is correct.
  2. I can do a reboot and upgrade to Vista (I have a dual boot), and then click stop.  He shut down correctly.  I can then turn on and start windows 7 - it works fine, no problem, raid is correct.
  3. I can do a restart and boot from CD (like Acronis), then reboot Windows 7 - it works fine, no problem, raid is correct.

  There is something strangely different between shutdown and restart in Windows 7.  Also, I have no blocking problems in Vista.  My solution is to do a reboot, the boot of Vista and then do a stop.  At least when I power on, Windows 7 starts up fine and raid is correct.

  I tried everything I can find in the way of suggestions on this forum and other websites without success.  I am stumpted.  My last test involved using msconfig.exe and disable all non-Microsoft services.  But no joy!

  My computer is 3 years old. I use an ABIT card with an Intel processor.  This is the first problem I've had in three years.  No problem with XP from the beginning and none currently with Vista.  The only problem with Windows 7 is closing.

  Well, that's all.  There must be a smart person out there with the answer.  Thank you

  I thank all of you for your help. I knew that closing in safe mode has worked very well. So I decided to disable the services a group with the intention of finding the only service that was causing the problem

  It worked. I found that the 'print spooler' was the cause.  I had installed an old printer (worked fine on Vista) and it seems to work perfectly without any problems on Windows 7. So I guess the power off fault is another reason. But after noting that the "print spooler" service was originally the power off of failure, I deleted the printer, then the driver of the printer. The printer is a HP Laserjet 2100.  Now all works.

  Once again, thank you for the suggestions.

  Problem solved.

  Cecil J

• stream HP for computer laptop 11-r015wm: my computer does not turn off

  I disable my computer by going to the closing process, once I hit the closing down the screen turned white, but the fire to rekindle never went away, and now I can't put it back in it or off it is just a black screen!

  Hello

  It may be that the machine did not completely stop, then try the following.

  First, hold the power button for 10 seconds before releasing.

  Press the power button and see if the notebook starts now.

  If so, let it fully load in Windows and then try to disable hybrid Startup Windows 10 - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close windows open and stop the laptop by right clicking on the icon in Start Menu, select (Admin) command prompt and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start the laptop and let Windows take over completely for a few minutes before checking if it is now shut down properly in the Start Menu.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• My computer does not turn off

  Hello
  My 'closed' option, nor my sleep option doesn't seem to work.
  I did a virus check, then a system restore to an earlier point, but it still does not work.
  I looked at other topics with updates to remove, but can not find the two. http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/9dc930dd-640D-4f5a-8b6e-34337f6b7f15
  My system is an Edition Vista Home premium Service pack 2 also...
  Let me know if you can help me with this.

  Try to boot from the Vista dvd startup repair and perform and check: http://www.bleepingcomputer.com/tutorials/tutorial148.html

  -@pache

• Computer does not turn off: "... copy windows is currently working with a file. Either wait to finish, or close it before you quit Windows. »

  Computer doesn't go out.  A box appears that says: "... copy windows is currently working with a file.»  Either wait to finish, or close it before you quit windows. »

  There is no files or programs.  I tried to wait a few days, but same box appears.  Can I just power off or unplug your computer.  It is great in every other way except closing.

  Vickie

  If you are absolutely sure that there are NO other programs or open files. Yes, you can go to start, then turn off the computer and select shutdown

  When you restart the machine. go to this link below and scan your computer

  http://www.Microsoft.com/security/scanner/en-us/default.aspx