I pulled a piece of paper stuck to the front of my printer and it will start? Help

Similar Questions

• a piece of paper stuck on the papertranferroller of my hp1102. How do iopen the printer to rol

  a piece of paper stuck on the papertranferroller of my hp1102. This paper comes out folded. How iopen the printer to join the rol?

  Thanks for the link, but that did not help. The paperjam wasn't in the area, you can join in the way described. The book was completely wrapped around the tranferroller at the rear end of the printer. So I had to saw open the metal part of the back, click - both plastic end remove the top plastic complete. Because one side came not enough I had to use brute force on the upper plastic part. In the end, I was able to reach the roll, and after an hour, I had all of the removed paper...

• I have a paper stuck in the queue that stops all the impressions

  I have a paper stuck in the queue that stops all prints! The status shows deleting, but nothing happens. I tried normal deletion methods, but it is always the point in the queue. All the other battery printing upward behind and unable to print. Help

  TerryPickett,

  Try to run delete print jobs to remove all print jobs stuck in the queue.

  Rick

• Got paper stuck in the printer and now will only print proofs. How to reset the printer

  Got paper stuck in the printer and now will only print proofs. How to reset the printer

  It looks like you may have some saved jobs in your queue that need to be removed.

  Here's how:

  To clear the print queue, stop the print spooler service and delete all the jobs/print pending.
     
  You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
        
  To stop the Print Spooler Service, click Start, run and enter in the box:
         
  services.msc
         
  Click OK to open the Services Applet.
         
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
     
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
     
  If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service immediately.  You must remove all print jobs backed up first...
     
  Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
     
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
     
  C:\WINDOWS\system32\spool\PRINTERS
         
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
         
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
     
  After the reboot, check again the Spooler Service for printing and the 'Status' column for the print spooler must be read "started."

  Submit new failure of print jobs.

• 7520 new stuck in the installation phase. Print head move load ink cartridges

  I'm stuck in the new phase of printer configuration. After running through the commissioning of questions and I opened the cover to charge the ink cartridges and the print head did not move. I ran across several reset process... Unplug the printer. Wait 60 seconds and plug it in again. Browse the configuration... Unplug the printer... more.

  This printer does not seem to be any cartriages.

  Hey JohnTT,

  Sometimes, these printers come with packaging that holds the printhead completely to the right at the gas station.  This avoids damage to the product during shipping.  You see all plastic parts orange that it may contain in place or Blue Ribbon?

  So, have you tried the carriage to the right hand?  Can it be moved or is it blocked?

  If the printer still will not release the print carriage after the power cycles and move it by hand, then I suggest you return the product and return to the retailer of purchase or by calling the HP Technical Support to see about a replacement.  The phone number for the USA / Canada residents is 1-800-474-6836.  If you are not in this region, click here.

  I hope this helps.

• T520: Small piece of paper stuck

  The print paper at the end of the roller got stuck on the last 2 inches of paper, the printer has kept trying to print on this small amount until the paper was distroyed and wedged between the heads of the printer. I can not pull paper backwards because there is nothing to grab the hand on, and this really hangs in the rollers. I'm down to the last 3 reels but can't get out the paper.

  Help, please.

  Hello
  Please turn off the printer and remove the paper tray for A4/A3 in the rear, there is a locking systems. Then try to remove the paper from the paper path. Now please carefully remove the transport aircraft with printhead with ink cartridges (from left to right) unit, then try to remove the paper from small pieces of printer paper.
  
  If the problem resolves, please air flow inside the printer, then there remove it automatically.
  
  Thank you
  Rashed
  
  I'm not an employee of HP, but I am an engineer @ HP Partner and I share my knowledge of my own time.
  If your problem is resolved please click the button "accept as a Solution.
  If my answer was helpful, please click the 'Thumbs Up' to say 'thank you '.

• HP Deskjet 3920: Paper stuck in the rollers sometimes

  Hello

  Sometimes, when I printed my all jammed paper out of the rollers and then results in paper jam, the last time I fixed it was 7 months ago and was working fine until this morning Thursday, when this problem started what should I do to fix?

  Thank you

  Hi @franco_1

  I understand that your printed pages are sometimes get stuck when feeding through the printer. I'd be happy to help you with this. Please use the following document to solve the problem; A "mechanism" error on the computer (paper jam) for the HP Deskjet printers.

  If the problem persists, I suggest calling to see if can get you a discount on a newer model.

  If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  I hope this helps.

• Stuck on the screen of HP recovery and cannot start windows

  HP Pavilion
  Model: 17 - 1215dx
  
  If you need the serial number or the fn, just ask. I didn't post too much sensitive information.
  
  It was originally 10 64-bit windows... but now has 8.1 Windows 64-bit
  i5 8gig of RAM processor
  
  Literally just close the lid and open it upwards and it wouldn't boot windows. It is stuck at the screen HP saying it's diagnose my problem. Tried a soft reset and a hard reset when you remove the battery and put it again while it is unplugged. Did not help. I can't start in safe mode. I tried to do a restore which has been a success but it restarts when he says "there was a problem, restart your PC. I'm frustrated and reset a factory and the same factory reset was successful and was when he came back to 8.1 because it's the OS, I bought it with but then it still wouldn't let me in windows. I was going to try and start to repair, but if I had known this would require an administrator I'd never have done the factory reset. I know I've been reckless, but I just wanted to work. But yes, I don't know what the problem is. I feel like if it was a hardware problem is just something to keep windows to operate. Should I try a repair disk? Would that help?

  The SecretLight

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post you need to grab your laptop and wanted to help - but we need more information.

  You said that your laptop came originally with Win10, but then later, you said you tried to go back to Win8.1, you can then said, it's the original OS.

  So, who was the original - Win8.1 or Win10?

  Ask because if it came with Win8.1 and you UPGRADED to Win10, while Microsoft tells you that there is no risk in the upgrade of Win10, because they allow you to believe that you can always go back to your original OS and setup within 30 days, the ugly matter faction is that the Win10 GoBack feature turned out to be unreliable - and when it fails She can let the machines in a corrupt State - which is not always the case, it happens often enough to be a problem, but you will get no warning beforehand that he goes to the trash your PC!
  
  The Win10 upgrade is known, in some cases, corrupt the partition of recovery that are stored by the OEM that built the original machine.  It's pretty much guarantee that no HP recovery will work.
  
  What will work restores your computer to its original factory state using HP recovery media. It is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the thumbs-up symbol to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• HP officejet pro 8600 printer: print the job stuck in the queue for a printer hp officejet 8600

  I try to print a document on my 8600 pro hp officeject and printer, but it will not be printed because there is a print job stuck in the queue.  I tried to cancel the print job stuck but will not remove. I tried to turn off the printer, but it still won't delete. Can you tell me how to cancel a print job that is stuck in the queue?

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.

  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.

  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the document has been deleted.

  Kind regards

  DP - K

• How can I clear the paper jam in the HP OFFICEJET 4500 printer?

  The jam occurred when printing on plain, white legal paper (8.5 x 14) and the landscape orientation.

  There are a number of the OfficeJet 4500 series printers. If you have the HP OfficeJet 4500 G510g then here are the relevant support pages:

  HP OfficeJet 4500 G510g - jams & feed problems .

  If you have a different printer access the equivalent page for her.

• HP envy 4502: point stuck in the queue does not print anything, tried to delete and always blocked

  tried to remove the item to print several times, still stuck, unable to print anything now

  HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning.

  Download and run printing HP and doctor Scan quickly and automatically perform several tasks of troubleshooting.

  When you click this link, HP Print and Scan Doctor is downloaded using the download of your Internet browser capabilities.

• I had a paper jam. I removed the paper from the front. Now, printing is blurred. Do not print color

  HP Officejet 6500 all-in-one

  Hello jeanneTemkin,

  All by removing the jammed paper from the printer something may have gotten potted in the printer causing the blurred impression. There are a ton of troubleshooting not to go into that might solve the problem, so for me to document all alone in a forum post would make for a very long page.

  Here is a link to an article that deals with the HP troubleshooting print quality problems

  Troubleshooting print quality problems

  I jump a few sections as some of the steps will not apply to you. Assuming you are using Windows, I suggest that this section ""Solution 6: print and evaluate a Print quality Diagnostic Report ' and, from there, depending on how the diagnostic report quality comes out will determine the next steps. "

  If the article does not help to solve your problem then if you could provide me with information a bit more as this model of printer you use.  The Officejet 6500 has quiet a few models. There are the E709n E709a, E709q, E710a and the E710n. Although for the most part very similar there are differences in lag that can make a difference in the steps to your question.  Also know what operating system will help determine appropriate measures, even though there is no much difference for this issue if you use Vista or Windows 7, it is if you are using Windows 7 compared to a Mac.

  I would like to know how the article works for you and then to provide the additional information if required.

• B210 in paper jam printer there is no paper stuck in the printer, but the screen shows paper jam

  Paper jammed paper but screen says paper jam jam preformed the resolution of problems and no resilt

  Hello

  Have you tried the steps outlined in this article. Give them a shot and tell us if it helps.

  Good luck!

• I have a paper stuck in the printer (as.) The status is delete and I can't get rid of it, so nothing will display.

  I have all tried, resume, restart, turn printer... off Quebec continues to display this document with the status of delete, but it won't go away.  Another thing, I then try to print gets in line behind it and will not be printed.  any suggestions?  I am a Manager on the account of printing and can I remove other documents when they appear in Quebec just this one...

  [Moved from comments]

  Thanks for the reply;  yesterday I just turned off everything (I had already turned off the printer and that did not work) computer and printer, and waited a few minutes when I turned it all back on the document had disappeared!  Yay!   Thank you for taking the time to answer

• HP Laserjet 1020:1020 print job stuck in the queue prevents other print jobs.

  It says printer problem

  A print job in the print queue prevents the other print jobs

  I bought this printer in a second hand store.  I plugged it on so I thought because I didn't have the cd can I download HP.  I was able to pick up the pilots just by plugging.

  Is there a way to get the print job from that other person removed seems strange he is stuck need helpppppppp

  I tried the fix for windows and it does not work is something I missed I tried the printer stop and nothing

  It is now fixed what I had to do is remove the printer in my computer, and then re-download the drivers and then he allowed this.  Thank you for your patience and help.