I put H & R Block at prep tax domicile that CD in my CD and nothing happens.
Lately when I put a CD in my CD drive, nothing happens. Before, when I put one in, it would immediately start running. Don't know where start to solve this problem.
Hello
Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
solves the problem.
Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
that the troubleshooter does not, and those who "could" be the cause.
Check with your system manufacturer Maker and device for possible firmware updates and the good
Your player registry entries.
Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
a person with the same model.
Forums - a lot of expert real help
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
Tags: Windows
Similar Questions
-
If I put all my files on the C drive that has the operating system and make a recovery of keys one, will I lose my files? drive C whereas the partition that has the operating system and drive D is the lenovo drive that has all the drivers lenovo and all those. Did I lose my files?
Yes, the collection clears all of the C drive and you will lose your files. The solution would be to backup regularly to an external HARD drive and after the key one to also restore the files from the external hard drive.
This has been answered before, if you do a search for "key recovery" it appears among the first results.
-
I put the camera chip in the hard drive and nothing happens?
I put two camera differand chips in the hard drive to load pictures and nothing happens
Hello
Thanks for your posting in the Microsoft community
How did you put camera chip in the HDD, I think that you have inserted in to memory card reader
Connect the cable to USB memory card and reformat the card, update your card drivers, and insert the memory card, the computer should then detect and reformat the card again
Check in Device Manager
1 right click on my computer.
2. Select Manage.
3. in the left pane, click Device Manager.
Refresh the drivers
1. right click on the entry with the error indicator, select Uninstall.
2. on the main menu, click Action, and then Scan for the hardware changes
Check if the drive is detected
1. double-click on my computer.
2. find the drive under devices with removable storage card.
Try other USB ports.
A yellow exclamation point . in Device Manager means generally that the device does not have enough power. If the player does not receive a sufficient amount of power from the USB port -
I had a problem with my laptop. I let a friend use it and she got a virus. The screen is black. She took it to get fixed. When she returned I couldn't open some files. (Always have this problem with some files) my shortcut icons are no longer there. Then I get this message on the Catalyst Control Center does not work. In any case, I did a scan and he told me that I had corrupted in my cbs log files so I tried to do the command findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt to find the corrupted file and nothing happened. Help!
Hello
Departure - in the search box, type-> order
at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN
Type the following commands (or copy and paste one at a time), each followed by pressing on enter.
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
RESET
That resets your TCP/IP stack
It might also be a good idea to updare drivers network - NETWORK card (wired) and WiFi (wireless)
by checing at the site of the manufacturer of the system/card mother and/or sites of the manufacturer of the real device.
Methods for manual update of driver at the end of this response.--------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------For settings.ini as this article sets out the question may be totally ignored.
The SFC.exe command reports Settings.ini file errors in the CBS.log file after that you add gadgets
for the Sidebar of Windows Vista by using the Sysprep tool and an Autounattend.xml file.
http://support.Microsoft.com/kb/947595-----------------------------------------------------------------------------------------------------------------------------
These errors only are in the settings.ini for the sidebar and are not a serious problem by all means.
Close the sidebar for that.
Something else for the settings.ini - run AutoRuns and look at the entries SideBar Gadget - y at - it
all pointing to is no longer present as temp files or uninstalled gadgets or not running?
Those who will reflect the "yellow icons" on the left side and the files/folders will not exist. If so just
Click on it and delete - Reboot. This may correct the errors that you see.Autoruns - free - see what programs are configured so that it starts automatically when your system
boots and you login. Autoruns shows you the full list of registry and file locations where
applications can configure Auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
-------------------------------Another process to try is to remove everything except a gadget - everything what you think is the most simple, that you use.
Maybe the calendar. Then RESTART - use another simple gadget, and delete the first class used
-RESTART again. See if that helps.Rarely, the error causing the problem with the sidebar and not not affect the system in general.
The SFC.exe command reports Settings.ini file errors in the CBS.log file after that you add gadgets to
the Sidebar of Windows Vista by using the Sysprep tool and an Autounattend.xml file.
http://support.Microsoft.com/kb/947595-------------------------------
Another method to try with the SideBar works does not is to copy the Settings.ini to another folder and
and then delete - then start sidebar.--------------------------------
For tcpmon.ini and settings.ini:
You can also try to restore any copy of a Vista DVD (even 32 or 64 bit however).
Access files on your Vista installation DVD
http://www.Vistax64.com/tutorials/86959-access-Vista-install-DVD-files.htmlHow to extract system files missing from the DVD of Windows 7/Vista.
http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/===================================================
===================================================Also update your drivers: (WiFi (wireless), NIC (Wired) and others as required)
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Moose title: How can I get the age of Mythology to work on windows vista
every time I put the disc in the computer installation screen dosnt pop up and nothing happens the disc passes just for a bit and stops, and the cursor hangs a bit and I can't get the disk to the computer unless I restart the computer
Hi rew55545,
(1) is this problem limited only to the age of Mythology disc?
(2) what version of the game you are trying to install?
Method 1: Run the fixit available in the link below and check if that makes a difference
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Method 2: run the fixit available in the link below to resolve any problems with DVD player.Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 3: Select the boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
-
I put in a CD or DVD drive and nothing happens.
I put in a disc. My use of the computer to recognize and automatic playback of the disc (CD & DVD) now, it does nothing. When I search in the files, the reader does not appear upward. When I look in run, nothing new. When I insert the disc, I hear running as she starts, but nothing happens. After a search here, I found solutions as turn on drive D; But how? Then, hardware troubleshooting, but that did not work. Can someone guide me through solutions to try? PLEASE, I BEG YOU.
Hello
First we will test the CD/DVD drive:
Try this to see if the drive is viable at all (you will need to make of these on)
another computer since your willingness not to not start - XP, Vista, Windows 7 or 8/8.1
(or even under Linux is not serious). You can also try to start with
another drive in Windows - any OS but do not use it to try to repairs
unless it's absolutely the same version of Windows on your system - just
start to see if the drive works./ Settings (BIOS/CMOS) often F2 then watch the display as launch you - set
the order of boot on CD/DVD first. Don't forget to when.Try to start on a Linux boot disk.
If the player does not start to these then there no or there is other equipment
problems that affect it. However, even it doesn't start that does not mean there is
other functions not possible some hardware problems affect the reader.Trinity Rescue Kit - download on top right of the page
http://trinityhome.org/home/index.php?wpid=1&front_id=12CD of Hirem boot is another good choice
http://www.hirensbootcd.NET/Download.html
http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.htmlSystem Rescue CD
http://SysRescCd.org/Main_PageScan a Windows PC for viruses from a Ubuntu Live CD
http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/Use Ubuntu Live CD to backup files from your Windows computer dead
http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computerCheck the wiring of course that nothing is not loose.
====================================================
====================================================2nd troubleshooting if the CD/DVD drive actually works:
From the desktop, or use the WINDOWS key + X - run - type RegEdit
OR place the cursor in the lower left corner of the desktop - right-click - Run-
type RegEdit.Click on the plus sign (+) next to the following folders
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class
\{4D36E965-E325-11CE-BFC1-08002BE10318}Right click on the key in the left pane - export so you can reverse in case of
a mistake. Save as Remove - Filters.reg (any name is ok with .reg extension).In the eyes of the right pane for one of these = UpperFilters - LowerFilters.
UpperFilters.bak - LowerFilters.bakIf right click on them - delete (maybe there is not one of these and if)
No it isn't the solution.)Close RegEdit
Reset
If you have no need to file .reg you registered then you can delete it.
---------------------------------------------------------------------------------------
Check with the system manufacturer's support, their documentation online, and
drivers. Look for the updates to the BIOS, chipset of low level drivers and major
device embedded and separate drivers.---------------
From the desktop - WINDOWS key + D while on the screen start to access the desktop:
WINDOWS key + X or build the mouse in the lower left corner right click and corner - command prompt (ADMIN)
Enter it below (or COPY and PASTE):
Reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" / f/v EnumDevice1 /t REG_DWORD /d 0x00000001
RESET
(from AtishayMSFT)-------------------------------------------------------------------------------------
-Use and you need to use it again after trying the methods below.
What happens if a device is not installed correctly? (Run the hardware and devices Troubleshooter)
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly=====================================================
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Starting from the command prompt from the desktop - Windows key + X - (Admin)
SFC/scannow
(space between C and /)Then run CheckDisk execution - chkdsk /r (the / r includes the parameter f controls)
Windows key + X - command prompt (Admin)
Chkdsk /r
(space between the k and /)Or run CheckDisk in Windows 8:
Improve performance by optimizing your hard drive - see "to repair a drive.
http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive--------------------------------
Windows key + X - Control Panel
Try this - Panel - Device Manager - CD/DVD - double click on the device.
Tab - click on update drivers (this will probably do nothing) - and then to the right of the driver
Click the drive - UNINSTALL - REBOOT this will refresh the default driver
battery=================================================
Your CD or DVD drive is not recognized by Windows or other programs
http://support.Microsoft.com/kb/314060/en-usThese can help - try "automatic repair":
How to run a repair 'automatic' to solve the problems of Windows 8 start
http://www.eightforums.com/tutorials/2843-automatic-repair-run-Windows-8-a.htmlHow to start on the "System Recovery Options" in Windows 8
http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.htmlHow to start Windows 8 in Mode safe
http://www.eightforums.com/tutorials/2757-safe-mode-start-Windows-8-a.htmlBoot to the tip "Startup parameters" in Windows 8
http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.htmlStart settings for Windows (including safe mode)
http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode----------
Windows 8/8.1 includes special methods to refresh (keep files and settings)
or a reset (new installation, remove all).How to restore, refresh or reset your PC
http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PCHow to create a system image to refresh your PC in Windows 8
http://support.Microsoft.com/kb/2748351How to update Windows 8/8.1
http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.htmlHow to reset Windows 8/8.1
http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.htmlIf you need a repair disc:
Create a system repair disc
http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-discHow to create a "system repair disc" (CD/DVD) in Windows 8
http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.htmlDownload ISO 8.1 Windows using your Windows 8.0 key
http://mcakins.com/2013/10/19/download-Windows-8-1-ISO-using-you-Windows-8-0-key/Download iso Windows 8.1
http://philipyip.WordPress.com/download-Windows-8-1-ISO/Download ISO Windows 8.1 using a key of Windows 8 and a few simple tips
http://BetaNews.com/2013/11/21/download-the-Windows-8-1-ISO-using-a-Windows-8-key-and-some-simple-trickery/
You can also do a recovery USB drive.How to create a USB stick recovery in Windows 8 and 8.1
http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.htmlOn November 15, 2013 8.1 Windows Backup Media will be available for purchase. Newegg and
others offer disk,"Backup Media" Windows 8.1 disk has the sale soon
http://BetaNews.com/2013/11/05/Windows-8-1-back-up-media-disc-available-to-buy-soon/I hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
The details are in the question.
Try to download the new version and install it from:
http://www.Mozilla.org/en-us/Firefox/all.html
See also: Installation of Firefox on Windows
Thank you
Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.
-
In the block of the URL, there is an arrow curved to the right end of the block. When I put the cursor in the block in preparation for the opening of a URL, the changes of curved arrow to a right arrow, pointing to the right. After entering the URL and pressing ENTER, nothing happens. If I click on the right arrow, I am taken to the desired site. It started to happen about 2 weeks ago. How can I solve this problem, so that when I hit the Enter key, I am taken to the desired site?
This problem may be caused by the AVG Safe Search extension.
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.org/KB/safe+mode
You can see on the AVG site if there is an update available.
-
So I got my iPod took me months ago, and I finally came back today. but I put it in charge there an hour and a half, and nothing will happen.
This is the forum of the iPhone.
You can try a recovery mode, but it could be the battery.
If you are unable to update or restore your iPhone, iPad or iPod touch - Apple...
-
I bought a brand new iPhone 5 s to the United Kingdom for use in New Zealand. When I'm in New Zealand and put the card sim inside (put a sim card in the first time), he said that it is not supported and it doesn't let me do anything else - cant even get into the phone. Why has this happened?
The United Kingdom, where did buy you it?
-
Try and put in place sync account, press 'next' and nothing
It is really all the details. I filled the form, e-mail, password, check accept, fill out the captcha, then - press and nothing. I have two computers that I hope to sync, one with XP, one with windows 8. I have exactly the same result with both computers.
What is the problem? Firewall? Blocker? Adblocker? Firefox is always the latest version. It is updated automatically. Whenever an update is available, it is accepted.
Will I need to run the troubleshooter for the two computers/OS?
Thanks, Jayakumars! That has worked well for me.
-
My new book mac early 2015, battery finish and get off. When I put the charger there is no charge light? I have reset the SMC, but nothing happens.
You can try another charger?
Also-
- Press the Option button and click it - system info - Power - post what is shown on the battery please
-
Password on notes does not work! Put juice in day to ios9.3 and password to notes, but nothing happened. Notes always open as before. I tried to add new notes too. But nothing has happened so far.
Same question, the lock in action field icon is absent.
-
"I put a memory stick and nothing comes up. I don't know how to locate photos that I downloaded on the stick. »
The query formerly box appearing high on the right is no longer appears. . (since my warranty has expired). It's a constant problem since the PC was purchased (case #[Personal information deleted], case #[personal information deleted]) as well as other problems IE: bad NIC etc. This old rather infirm Senior took the PC110 - 210 already replaced once. I kept the 2nd PC despite the problems. Everything just too old for at the back of the store. Thanks for any help.
Sorry, as I asked earlier, what program you used originally?
Other than that, I recommend from this day forward, you manually open the memory stick (as I first loaded) and copy and paste the images on drag to a folder on your hard drive. Then again that upward on another drive or in a cloud like Microsoft OneDrive service, etc.
Don't be fooled by letting them on the memory stick.
Good luck.
-
buy an iphone 5s by amazon and I came with iCloud blocked an account... I called the seller and does not that I do that I'm from Venezuela please need your help
No one here can help you. The device is locked activation. Since you have made the purchase by Amazon, you can check with them to see if they will stand behind it. No one on the forum, or Apple can help you remove the lock. Only the previous owner can do this. I suggest that you demand a refund, so let's start a claim with Amazon about this dealer.
Maybe you are looking for
-
Equium A100-306: built-in speakers do not play certain sounds
I got my A100-306 for 2 weeks, and my speakers do not play certain sounds. This problem appeared only in recent days. When I go in the speaker settings control panel it says that there are no speakers. Can someone tell me what to do to fix this?
-
Unauthorized for restriction administrator settings changes.
(OS = Home XP SP3, Internet through TDS via DSL, security = McAfee total protection). Recently I had problems with Google Chrome and Internet Explorer, but not with Fire Fox connectivity. Both browsers load, but can not access the Internet despite a
-
Windows xp restarts when you try to shut down your computer. I don't have Roxio on my pc
-
BlackBerry Smartphones BBM implemented after security wipe
I decided to back up my data because I wanted for security wipe my phone and just restore the really important files that I have. I security wiped my phone earlier because he is trolling a lot and I'm trying to set up my BBM. He leads me nowhere but
-
Windows 7 RTM / Realtek HD Audio drivers not installed correctly.
I have a macbook pro, and I was told that I need to install the latest Realtek HD audio drivers, as the drivers included on the OSX cd are not good. I downloaded both the executable installer for the drivers and the zip file, but regardless of how I