I put in a CD or DVD drive and nothing happens.

Similar Questions

• I put the camera chip in the hard drive and nothing happens?

  I put two camera differand chips in the hard drive to load pictures and nothing happens

  Hello

  Thanks for your posting in the Microsoft community

  How did you put camera chip in the HDD, I think that you have inserted in to memory card reader

  Connect the cable to USB memory card and reformat the card, update your card drivers, and insert the memory card, the computer should then detect and reformat the card again

  Check in Device Manager
  1 right click on my computer.
  2. Select Manage.
  3. in the left pane, click Device Manager.
  Refresh the drivers
  1. right click on the entry with the error indicator, select Uninstall.
  2. on the main menu, click Action, and then Scan for the hardware changes
  
  Check if the drive is detected
  1. double-click on my computer.
  2. find the drive under devices with removable storage card.
  Try other USB ports.
  A yellow exclamation point . in Device Manager means generally that the device does not have enough power. If the player does not receive a sufficient amount of power from the USB port

• I inserted my office 2007 disk into my cd drive and nothing happens

  I have restored my computer to factory settings and want to reinstall the Office home and Student 2007 I bought with it. I inserted disc makes it sounds right... but nothing happens after that... no permissions for windows appear... no verifiacation windows... it just sits there. I know that the cd is ok as I installed it on my other computer... that it is authorized for the 3 machines... so I am at a loss to know what to do now!

  Go to the computer, click the disk drive, look for the files there and run any Setup program.

• How to install windows 8.1 iMac (27 inch, mid 2011) without DVD drive and race El Capitan

  Hello! How to install windows 8.1 iMac (27 inch, mid 2011) without DVD drive and race El Capitan?

  I read everything I could on the subject and could not get the Boot Camp Assistant to create the USB key. Can you help me?

  Boot Camp Version 6.0.1

  If you run the wizard of BC, are you give the possibility to create an installer from USB? Did you change Bootcamp Info.plist file?

• My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  I have a lightscribe, CD/DVD player, and I started having problems about a month ago... I tried to burn a lightsribe CD and my computer told me that I didn't have a CD Lightscribe drive (I!)... then when I just tried to burn the music on the CD, he didn't do it either... Finally a week ago, I tried to play a movie on my laptop, and that does not work either.

  When I insert in the film or the cd, the drive lights up and I can hear the work, but it is as if she has no connection with my laptop and my laptop is not picking up the CD/DVD drive try to play a movie or a cd.

  A friend suggested that I go to the HP website and am trying to download a driver, but I didn't know what to do once I got to this website, and I don't know if it will work.

  If you know how to solve this problem, or if you have had a similar problem with your computer, please help, thank you.

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• I have a version of the education of the CSuite 6 design and web premium. Bought a new mac without DVD drive and now I have no idea how I can install it on my laptop. S/N does not seem to work. Can anyone help?

  I have a version of the education of the CSuite 6 design and web premium. Bought a new mac without DVD drive and now I have no idea how I can install it on my laptop. S/N does not seem to work. Can anyone help?

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  Quickly find your serial number

• went to the command and put in findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt to find the corrupted file and nothing happened

  I had a problem with my laptop. I let a friend use it and she got a virus. The screen is black. She took it to get fixed. When she returned I couldn't open some files. (Always have this problem with some files) my shortcut icons are no longer there. Then I get this message on the Catalyst Control Center does not work. In any case, I did a scan and he told me that I had corrupted in my cbs log files so I tried to do the command findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt to find the corrupted file and nothing happened. Help!

  Hello

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  It might also be a good idea to updare drivers network - NETWORK card (wired) and WiFi (wireless)
  by checing at the site of the manufacturer of the system/card mother and/or sites of the manufacturer of the real device.
  Methods for manual update of driver at the end of this response.

  --------------------------------------------------------------------------------------
  --------------------------------------------------------------------------------------

  For settings.ini as this article sets out the question may be totally ignored.

  The SFC.exe command reports Settings.ini file errors in the CBS.log file after that you add gadgets
  for the Sidebar of Windows Vista by using the Sysprep tool and an Autounattend.xml file.
  http://support.Microsoft.com/kb/947595

  -----------------------------------------------------------------------------------------------------------------------------

  These errors only are in the settings.ini for the sidebar and are not a serious problem by all means.

  Close the sidebar for that.

  Something else for the settings.ini - run AutoRuns and look at the entries SideBar Gadget - y at - it
  all pointing to is no longer present as temp files or uninstalled gadgets or not running?
  Those who will reflect the "yellow icons" on the left side and the files/folders will not exist. If so just
  Click on it and delete - Reboot. This may correct the errors that you see.

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  -------------------------------

  Another process to try is to remove everything except a gadget - everything what you think is the most simple, that you use.
  Maybe the calendar. Then RESTART - use another simple gadget, and delete the first class used
  -RESTART again. See if that helps.

  Rarely, the error causing the problem with the sidebar and not not affect the system in general.

  The SFC.exe command reports Settings.ini file errors in the CBS.log file after that you add gadgets to
  the Sidebar of Windows Vista by using the Sysprep tool and an Autounattend.xml file.
  http://support.Microsoft.com/kb/947595

  -------------------------------

  Another method to try with the SideBar works does not is to copy the Settings.ini to another folder and
  and then delete - then start sidebar.

  --------------------------------

  For tcpmon.ini and settings.ini:

  You can also try to restore any copy of a Vista DVD (even 32 or 64 bit however).

  Access files on your Vista installation DVD
  http://www.Vistax64.com/tutorials/86959-access-Vista-install-DVD-files.html

  How to extract system files missing from the DVD of Windows 7/Vista.
  http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

  ===================================================
  ===================================================

  Also update your drivers: (WiFi (wireless), NIC (Wired) and others as required)

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I get the age of Mythology to work on Windows Vista, every time I put the disc in the computer installation screen dosnt pop up and nothing happens

  Moose title: How can I get the age of Mythology to work on windows vista

  every time I put the disc in the computer installation screen dosnt pop up and nothing happens the disc passes just for a bit and stops, and the cursor hangs a bit and I can't get the disk to the computer unless I restart the computer

  Hi rew55545,

  (1) is this problem limited only to the age of Mythology disc?

  (2) what version of the game you are trying to install?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  
  Method 2: run the fixit available in the link below to resolve any problems with DVD player.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• What should I do when I insert a blank DVD and nothing happens?

  I'm running Mac OS X 10.9.5.  I want to burn files (jpg and MOV) on a DVD.  I insert a DVD (as documented in the help) and nothing happens.  I tried to go in disk utility, by selecting the drive and selecting the burn.  He tells me to select the files I want to burn.  I can select a folder, but the jpg and mov files are all shaded out and not selectable.  I tried Sony r and Sony + R without result.  Any help would be appreciated.

  Update - I have a reader provided with the iMac Superdrive.  I tried to reset my USB ports with command-option-p-r on startup.  Still no drive does appear on the desktop when inserted and still cannot select all the images in the option "burn" in disk utility, even if I get the message to select the files to burn.  It's very frustrating.

• I just changed the administrator to standar account now the Dungeon of computer on request for the password that I continue to put the one I use to have but nothing happens whats rong whit this

  Just change the administrator account for standar now the computer keep on asking the password I continue to put the one I use to have but nothing happen how to find the password, usted an i have I removed it now what?

  Hello

  see if that can help you with this status has changed for the account

  worth a try

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  http://support.Microsoft.com/kb/940765

• Satellite Pro 4600: need info on DVD drive and RAM avaible

  Hello!
  I'm here for my first thread with the usual question of compatibility of drive and the dvd ram...

  I made a mistake: I bought the drive and ram without looking on this forum...

  In any case, on the optical drive:
  I saw I had to look at the manual... but I did not because my laptop is second hand.
  I had a look at [http://www.toshiba.fr/produits-toshiba/produits-informatiques/satellite_pro_4600_piii700_128.htm#]
  but... I don't know how it is supposed to help me choose an optical drive.

  So if you have somewhere to exact matches for my smoker pro model, it would be great.

  Now Ive had a problem of Ram also, but Im gona do another thread.

  Thanks a lot for your help

  Sylvan

  Hello

  > I saw I had to look at the manual... but I did not because my laptop is second hand.
  It s no matter she s a laptop second hand. You can download the user manual for this series of portable since the European driver Toshiba page.

  I did and discovered that this drives are supported:
  Toshiba drive CD-RE/DVD-ROM SD-R2002
  Toshiba drive of DVD - ROM SD-C2402
  TEAC CD-224th CD-ROM drive

  Best regards

• How do I install the cd - dvd driver and hence

  I use a drive cd - dvd but now Im receiving to reinstall.
  How and where? my driver installation disk? or...

  Hi Phillip Rose,

  1. what operating system is installed on the computer?
  2. What is the brand of the CD/DVD drive?
  3. don't you make changes to the computer before the show?

  I suggest you to download and install the drivers for the CD/DVD on the manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• I bought a laptop mini dell who doesn't have a cd/dvd drive and would like to get my photos from my camera on it.

  Computer: Dell Inspiron mini 910

  Camera: Vivitar ViviCam X 024 digital camera

  Program: Vivitar experience Image Manager software

  I've tried connecting the camera to the computer, downloading the software directly from vivitar.com (invalid email supposedly), control panel addition and the removal of the cameras (not on the list of cameras), ect... I am now at a loss what to try next so if someone can help it would be greatly appreciated.

  The camera uses media that can be deleted?  If so, download a USB drive for this type of media nd it allows to read the media when you remove it from the camera.

  Regarding the "no CD/DVD drive" - If you really think you want - buy one - USB external.

  If you have a ViviCam X 024 and looking at technical specifications and web Vivitar support page you can see the Manual of the camera that shows what you can / should use a SD memory card.  With a decent USB drive for the type of card, you should be able to remove it and read it as any external USB drive.

  Well, to tell you the truth, however, the manual (page 48) makes it sound like the camera is - somehow - just a SD card reader.

  Transfer media from my camera to my computer manually (using Windows)

  1. use the USB cable that came with your camera to connect your device to your computer.
  2. a window appears with a list of options, select open folder to view files, and click OK.
  3. open the DCIM folder and the folder to view multimedia files.
  4. Select support and copy the files in this folder to your computer. Optionally, select the files and choose copy from the Edit menu. Select a folder, then choose Paste from the Edit menu.
  5. We recommend that you copy the images in the photos / folder my pictures and videos in the videos / folder my videos.
  6. do not disconnect the cable during transfer. This will cancel the file transfer on their way to your computer.

  You are keen on the CD/DVD drive for installation of some software?  You could make the CD in ISO image and install a program that would go the ISO image on your mini.  Or better yet, ise some external USB device connected to another computer to copy the contents of the CD to a folder on the said device and then transfer it to the mini.

• I put H & R Block at prep tax domicile that CD in my CD and nothing happens.

  Lately when I put a CD in my CD drive, nothing happens.  Before, when I put one in, it would immediately start running.  Don't know where start to solve this problem.

  Hello

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I click on "change drive letter and paths" and nothing happens.

  I need to change the drive letter on my iPod and every time I go into disk management I click with the right button on my iPod and then click on "change drive letter and paths" and absolutely nothing happens. I tried to change it and I'm just stuck on this step.

  I need to change the drive letter on my iPod and every time I go into disk management I click with the right button on my iPod and then click on "change drive letter and paths" and absolutely nothing happens. I tried to change it and I'm just stuck on this step.

  Have you installed the latest drivers for your pad? There are a lot of driver downloads for windows, iPad etc.

  Maybe you need the correct driver for your IPad and you will then be able to change the drive letter...