I put the 1099 vendor to print as "Doing Business as (DBA)" but it always print the name of the seller?

Similar Questions

• Machine Vista "frequently", but not always, ask user name and password to access the public folders on the XP machine.

  Location:

  4 x Vista computers
  1 x XP computer acting as a server file, all the data in the "shared folders".

  All 4 Vista computers were to access shared data on the XP machine for two years without problem. All of a sudden this week one of the Vista computers "Frequently" but not always ask for a username and password to access the machine XP - not only shared folders, but still a list of shared resources on the machine XP via my network places is the result in the box of "connect to" request credentials to appear. All 3 other Vista machines have no problem to access the XP machine, so the problem must be with the a Vista machine.

  To put a spanner in the works as I have said in this case "Frequently" and by that I mean probably 9 of the 10 connection attempts. Let's say, you can see the name of the computer in my network places, you double click it and have asked for credentials, cancel the attempt and to repeat 4 or 5 times and then you could get display shared resources without going into the details of connection. For a few minutes, you might be able to access all the shared data and to navigate through the folders, but then all of a sudden have asked you credentials and can not access to anything, even the files accessed you seconds before.

  Lets say you are able to access the shared folders, you navigate to the Parent folder, then under A folder, then a subfolder B, go back to A notebook, then try to access folder B even once and you get guest credentials, quit out of the network completely locations, navigate back to the XP via Network Places and this machine you not even be able to display all the shared resources on the XP machine.

  I've also set up a shared folder on a Vista machine with matching username and password on the machines and the Vista machine with the get the problem exactly the same problem so this definatley Vista machine with the question and not sharing files on the XP machine.

  Someone at - he met before or have any suggestions?

  Hi MikeBarnes,

  You can check in the Analyzer for performance and reliability.

  Step 1:

  To start reliability monitor and performance monitor

  a. Click Start, right-click computer and click on manage.

  b. in the Microsoft Management Console navigation tree, click on performance and reliability.

  Step 2:

  You can also try a system restore to a point before the problem started.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 10.10.5 running on macbook pro. I want my email when received on the receiver side to read with my first initial, followed by my first name, and last name. But it always appears as name the middle initial, then last name.

  I want my email, as it appears to the recipient to read: my first initial, followed by my middle name, then my family name. But no matter what I try,

  It always appears as name the middle initial, then last name. any suggestions?

  Not knowing what you have already tried

  -Preferences - accounts - e-mail did change the name of the account alias help?

• How can I put the ink cartridges in my printer?

  I got a HP Photosmart 5510 for Christmas and I'm putting it in place. Problem is, I have no idea how to put the cartridges in the printer. The instructions on the printer are not clear enough for me to know where to place them.

  Hello

  A guige/poster that comes with the printer should show you how to do this (steps 11 and 12), all text and images are here. If you are unable to locate, please download it from the following link:

  http://h10032.www1.HP.com/CTG/manual/bpu72495.PDF

  Kind regards.

• Want 5544: Put the bad ink in my printer

  I put the wrong ink in my printer

  Looking for answers, answer these questions.

  Please follow the instructions here and answer all questions in detail.

   

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/want-good-answers-ask-good-questions/TD-p/7933

• I want to print PostScript in illustrator, then put the Distiller how to add print on the list?

  I want to print PostScript in illustrator, then put the Distiller how to add print on the list?

  What exactly do you want to do it is not possbile to save to the PDF format?

• Put the printer 'outside' guides a document

  Hello

  I received a Word document I want to adopt so that it can be printed.

  The PDF itself has a size of 210 mm * 210 mm, which is the size I am looking for. If I add printing marks, I'm obviously almost 2 cm horizontally and vertically. However, this isn't the goal. There are two ways: messing around with the paper size of the words or messing around with the PDF file. I prefer the latter, because change papersizes in Word means pain and headaches.

  It is the most obvious: can I add a white margin on each side of the document and then get my right pads and put the printer marks?

  I searched the Internet and found some people to think in one background, others on the use of PitStop, but none of them has done the job so far.

  Any ideas?

  Kind regards

  Thorben

  Use the Crop Pages... option in the Document menu. You can use it to add white margins around the PDF.

• Can I put the Satellite P100-240 with internal fingerprint reader

  I have a Satellite P100-240.
  Although he did not come equipped with material to print finger scanning, it has clogged the hole in the box where he would go.
  So I wonder, can I get the hardware scanning separately and adapt it to the laptop?

  I don't see any option for the material to be sold separately on the Tosh site and I'm not even sure who makes the hardware for them so I can source it independently.

  Can we offer here advice or information on this operation?

  Hello

  You are right. Some P100 units support the fingerprint, and some units have been delivered without this feature.
  As I m not wrong not these fingerprints can be upgraded

  But to be 100% sure you should ask the local ASP (authorized service provider) for details.
  But in my opinion you can not put the laptop with fingerprint reader.

  Good bye

• When I try to scan several pages, it puts the pages as separate files instead of a single file.

  When I try to scan several pages, it puts the pages as separate files instead of a single file. For example, I may want to scan 5pages ofa patient office visit, yet, when I scan using the ADF, it separates each page in a single file.  I need to have the pages I scan have a single file. OfficeJet 6700

  prod # CV078A

  Windows 7 premium 64-bit

  Same thing for me.  I called HP about it the first time I tried I scans a document when my printer was 7 days old.  I was connected with the service to customers in India.  The technician spent about an hour with me trying to get the 6510/6515 printer to work, even to take control of my new 64 bit Windows 7 core i7 notebook.  Ultimately she essentially told me that even if it is announced to scan documents, this really means that each page is a separate document.  In other words, this printer, as well as all other issues, it is will only scan one page at a time.

• With HP8600 I put the Option for tray 2, but it will pull only from the Tray1

  Envelopes of printer with HP8600 I put the Option for tray 2, but it will pull only from the Tray1.

  Hello finfannc,

  Welcome to the HP Forums.

  I see that you are having problems with printing envelopes from tray #2.

  Just to let you know, the printer will only print envelopes of Lac #1.  Here is the link to the User Guide that will show you what all is supported and what bins what to do. For envelope printing, go to page #165-167 media support and sizes of envelope.

  Thanks for your time.

  See you soon,.

• Files on a share network stuck as 'read only' to put the computer to sleep.

  By necessity, I use my 98 computer windows that the file server since tempting to access any shares of Vista will cause Windows 9 X to crash. It is already used as a print from the Vista computer server does not have a parallel port.

  I worked on a Microsoft Word document and subject to frequent interruptions. When I put the computer to sleep before walking away from the keyboard, it isn't properly disconnect the Win98 system. Wake up to the computer, I am unable to save office documents, because they are locked for editing.

  In addition, sometimes even after I close Word or Excel, the system is not disconnected. Even when I stopped all other computers, the Win98 system reports that there are still users connected to the system when I go to stop him so. Is it possible to force the Vista computer to disconnect all network connections before you put it to sleep or stopping then the Win98 system recognizes that no one is online and that all the files will be closed?

  I really don't want to have to close a document that I am in the middle of working on when I have to walk away from the keyboard, but this seems the only solution to the problem. Leaving open is the main reason that I put the computer to sleep rather than stop it. Recording locally is not really a good option because I want files stored in one place, and Vista Home Premium does not support synchronized folders.

  Any suggestions? I already use the Briefcase feature to save documents on a flash drive, do I have to use the drive in question and transfer it to the server through network disks? This seems to beat the goal of a network.

  The affected systems are Windows 98 Second edition and Windows Vista 64 bit Home Premium =.

  Hello

  Win 98 is a former client OS, server to call (or any other OS cleint) is nice, but this does not mean that they can be found on a peer-to-peer network and behave like a real server.

  Under this situation (using Win 98 for a server) it is not advisable to change the files over the network. First copy them to the Vista Edit computer and then synchronize. Return using one of the many free synchronization applications that work on most of the windows releases.

  Example, http://www.snapfiles.com/reviews/Allway_Sync/allwaysync.html

  There is no judgment of network functionality, if the Application is enabled and go to sleep while a file is open on Win 98 it will stay open. Closing the file needs to be done by the application.

  -------------------------

  My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How to build a photo file to be able to print poster size?  I would use an outside vendor to print.

  How to build a photo file to be able to print poster size?  I would like to use an external vendor to print

  Talk to who that it is made to feel and see what their needs are. Most often a jpg high quality enough. Often, you have a PPP high setting for posters due to the viewing distance. 300 DPI to max, but I went up to 100 dpi for prints 30 X 40.

• Put the loop of variables in a single table with formatting (PHP)

  I have the following loop;

  <? PHP

  $i = 1;

  While ($i < = $num_rows)

  {

  $tempquantity = "extra". $i.' quantity ';

  $tempcomments = "extra". $i."comments";

  $tempname = "extra". $i.' name ';

  $tempprice = "extra". $i."price";

  $$tempquantity = $_POST ['extra'. $i. "quantity"];

  $$tempcomments = $_POST ['extra'. $i. "Comments"];

  $$tempname = $_POST ['extra'. $i. "name"];

  $$tempprice = $_POST ['extra'. $i. 'price'];

  Print "Extra name: $$tempname;

  Print "< br / > ';

  Print "Extra price:". "." $$tempprice;

  Print "< br / > ';

  Print "quantity:". "." $$tempquantity;

  Print "< br / > ';

  Print "reviews:". "." $$tempcomments;

  Print "< br / > < br / > ';

  $i++;

  }

  ? >

  Which, since there are 3 rows, outputs the following:

  Extra-Nom: dfvgfddf

  Extra price: 4

  Quantity required: 67

  Customer reviews: gtfh

  
  

  Extra-Nom: wewew

  Extra price: 34

  Required quantity: 45

  Customer feedback: thtrt

  
  

  Extra name: ewewe

  Extra price: 43

  Required quantity: 12

  Customer feedback: gdfgg

  I want to be able to do is to show the output above in a PHP email body variable which, according to me, this means that the loop variables must be in a single array variable as coding in a body of email variable is not allowed. How can I put a loop of variables like that in a single variable, and how to keep the < br / > tags and names before variables ("name Extra:' etc."), so it seems that it should in the PHP email body?

  Thanks in advance

  I also need to set the variables generated by the loop in a single database field

  Why?  Looks like a mistake to me.

  Anyway, why not change it.

  
  
  The name of the tenant: $rentername

  on this subject.

  
  
  " The tenant's name: $rentername.

  $i = 1;

  While ($i<>

  {

  $tempquantity = "extra". $i.' quantity ';

  $tempcomments = "extra". $i."comments";

  $tempname = "extra". $i.' name ';

  $tempprice = "extra". $i."price";

  $$tempquantity = $_POST ['extra'. $i. "quantity"];

  $$tempcomments = $_POST ['extra'. $i. "Comments"];

  $$tempname = $_POST ['extra'. $i. "name"];

  $$tempprice = $_POST ['extra'. $i. 'price'];

  $body. =<>

  Additional name: $$tempname
  

  Extra charge: $$tempprice
  

  Required amount: $$tempquantity
  

  Customer reviews: $$tempcomments
  
  

  EOT;

  $i++;

  }

  and then remove the loop where it occurs earlier.

• Put the Date of last changed on PDF

  Is there a way to put the date of last change on a PDF using Javascript? I'm putting together a folder of maps in PDF format, and the only way I can think to do is to print each card with its file name and last modified date (so we can go back to the folder and delete the duplicates and the very old).

  Wonderful wire print with Document PDF file name has helped find me a way to put the file name and the current date in each pdf as a footer, but when I tried to modify the code to get the last update, I get an error.

  I have to admit that I am a newbie when it comes to Javascript, so any suggestions would be extremely useful.

  My code is as follows:

  // SetRemoveFooter 
  
  app.addSubMenu({ cName: "Footer",cUser: "Set/Remove Footer", cParent: "File", nPos: 20 }); 
  app.addMenuItem({ cName: "Set Date Time (Filename)", cParent: "Footer", cExec: "SetFooter(1)"}); 
  app.addMenuItem({ cName: " -> Set Date .... centered", cParent: "Footer", cExec: "SetFooter(2)"}); 
  app.addMenuItem({ cName: " -> Set Date .... right", cParent: "Footer", cExec: "SetFooter(3)"}); 
  app.addMenuItem({ cName: "Set Page ", cParent: "Footer", cExec: "SetFooter(4)"}); 
  app.addMenuItem({ cName: "Set Both", cParent: "Footer", cExec: "SetFooter(5)"}); 
  app.addMenuItem({ cName: "-------------------------------", cParent: "Footer",cExec: "{}"}); 
  app.addMenuItem({ cName: "Remove Both", cParent: "Footer", cExec: "RemoveFooter(5)"}); 
  app.addMenuItem({ cName: "Remove Date Time (Filename)", cParent: "Footer", cExec: "RemoveFooter(1)"}); 
  app.addMenuItem({ cName: "Remove Page", cParent: "Footer", cExec: "RemoveFooter(4)"}); 
  
  //Set/remove Footer 
  function SetFooter(ARG) 
  { 
  var FileNM = this.documentFileName
  
  var AcDate = document.lastModified
  var AcDateFormat = "yyyy/mmm/dd HH:MM" 
  
  var Box2Width = 50 
  for (var p = 0; p < this.numPages; p++) 
  { 
  var aRect = this.getPageBox("Crop",p); 
  var TotWidth = aRect[2] - aRect[0] 
  if (ARG<=3 || ARG==5) 
  {var fd = this.addField("xftDate", "text", p, [30,15, TotWidth-30-30,30]); 
  fd.value = util.printd(AcDateFormat, AcDate) + " (" + FileNM +")"; 
  fd.textSize=6; fd.readonly = true; 
  if (ARG==1){ fd.alignment="left" }; 
  if (ARG==2){ fd.alignment="center" }; 
  if (ARG==3){ fd.alignment="right" }; 
  } 
  
  if (ARG==4 || ARG==5) 
  {var bStart=(TotWidth/2)-(Box2Width/2) 
  var bEnd=((TotWidth/2)+(Box2Width/2)) 
  var fp = this.addField(String("xftPage"+p+1), "text", p, [bStart,30,bEnd,15]); 
  fp.value = "Page: " + String(p+1)+ "/" + this.numPages; 
  fp.textSize=6; fp.readonly = true; 
  fp.alignment="center"; 
  } 
  } } 
  
  
  function RemoveFooter(ARG) 
  { 
  if (ARG<=3 || ARG==5) {var x = this.removeField("xftDate");} 
  if (ARG==2 || ARG==5) {for (var p = 0; p < this.numPages; p++) 
  { 
  var x = this.removeField(String("xftPage"+p+1)); } 
  } }
  

  Everything worked perfectly until I added the line var AcDate = document.lastModified

  Is there a simple solution, or is it a much more complicated problem?

  Thank you!

  It failed because there is no such thing as document.lastModified

  Try this instead: this.info.ModDate

• Put the iMac to sleep

  How I can put the iMac to sleep automatically after a certain time. I don't have this option in energy saver (only display option appears).

  In, click the Schedule energy-saving.