Put the printer 'outside' guides a document

Similar Questions

• I try to print from Windows Photo Gallery. Put the print job in the queue, but does not print.

  I try to print a photo directly from the Windows Vista Photo Gallery. The task appears in the print queue and says he is "sent to printer", but prints never. I can print from other programs. I tried to reinstall my printer driver but no problems. My printer is a Dell 946. Any ideas?

  Hi DElizabethB,

  1 when was the last time you were able to print using Windows Photo Gallery?
  2. did you of recent changes on the computer?

  Method 1

  It is possible that some third-party photo editing software installed on the computer is in conflict with the printing process.

  I suggest that you check if the Windows Photo Gallery is set as default program for opening images on the computer.

  1. open default programs by clicking the Start button, click default programs.
  2. click on set your default programs.
  3. in the framework of programs, click the Windows Photo Gallery, and then click set this program as default.
  4. click on OK.
  5. check if printing works.

  Method 2

  It is possible that some settings for the printer are incorrect, run the fix tool available in the link below and check if it works.

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 3

  It is possible that some third-party programs installed on the computer are in conflict with the printing process.
  I suggest you perform the clean boot procedure and check.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on Start, type msconfig in the search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. on the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• put the printer online

  My status is displayed as "offline".  How to bring back 'online '?

  Hi there gracie5,

  To eliminate the problems of software lets try download and does not perform the doctor print and scan located here:
  http://support.HP.com/us-en/document/c03275041

  It can fix its own much and if not to give a better idea of what is happening. Let us know the results.

  Good luck!

• disorder of the print error message PDF document does not print selected pages

  When printing PDF receive error cannot print document No only selected pages

  Hi alans25325228,

  Try the following: open Adobe Acrobat/Reader navigate to edit-> Preferences menu

  • under Documents, change "Show the documents in PDF/A mode" Never
  • under the (enhanced) protection, clear protected at Startup Mode

  Click OK to confirm the changes.

  Restart Acrobat/Reader, now, try to print the PDF file.

  I would like to know if it works.

  Kind regards

  Meenakshi.

• How do I put the printer on line

  How can I get my printer back online

  Please help [email edited by Moderator]

  Hello

  I have an officejet wireless printer 4500 and my pc says that it is offline, it will print it please help thanks to return you

  [email protected]

• HP psc 1310 all in the printer software does not scan documents or computer keyboard control images.

  HP psc 1310 all in the software of the printer will not scan documents or photos of computer keyboard, control and transfer the file to the hard drive.

  Hi jghall35,

  1. When did you start to question?

  2 have you scan before without any problem?

  3. are you able to scan manually?

  4. What do you mean by the transfer of control of computer keyboard saying the file on the hard drive?

  5. what you trying to accomplish?

  Links:

  Scanning: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/scanning-frequently-asked-questions

  HP support link:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&TaskID=110&prodTypeId=18972&prodSeriesId=360489

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Printer no longer works correctly. When I try to print nothing happens, the documents are waiting but the printer is offline.

  I reinstalled the printer three times. It works fine when I first install it, and then when I try to use it later it will not be printed. I ran the resolution of problems and there was a problem it could not fix. The last time that I used it, I was trying to print, nothing happened. About an hour or two later the printer came herself and documents printed on its own. I was not even at the computer. I had the printer installed more than a year without any problems. This just started happening. The only thing I can think who might have caused it comes from our modem died and we had to replace recently.

  I have a Toshiba Satellite L305-S5957 computer laptop, Windows 7, 32-bit and the printer is a MFC-495CW brothers. Any advice would be appreciated. Thank you.

  Hello

  Please contact the Microsoft community. We will be happy to help you with your concern.

  According to the description, you are facing problems with the printer.

  Please follow the steps to solve the problem with the printer. If the problem is still not resolved, please uninstall and reinstall the printer.

  Method 1: Please follow the steps in the link:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2: Remove and re - add the printer

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

• LaserJet 4000 TN: The printer HP Laserjet 4000 Series PCL5: error state & quot; message & quot;

  I sent the following message to Microsoft after a ' update:

  I have a printer HP Laserjet 4000 Series PCL5 TN which worked beautifully "black only" for many years. A recent update (Windows 10:12 / 22/15) seemed to put the printer in the "printer error state", when you try to print a simple document. It has been my default printer for a long time. I followed the suggestions of printer "windows 10", that is, unplug and plug - check cable (not USB) connections, remove the printer from the list of print devices /, reinstall drivers HP for Windows 10 (following suggestions from HP on HP site) - nothing seems to work. It has a network cable connection, but it is directly connected to my computer, no other computers are connected. See screen capture below. I even did a "recovery" of before 12/22! Any suggestions? Thank you. GM

  I received instructions from Microsoft:

  You run the printer Troubleshooter and identify the cause?

  If this isn't the case, we will do that by visiting the link below and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows-10/fix-printer-problems

  Check also the update (KB number) has recently been installed on your computer.

  You can also restore printer drivers and check.

  To restore the driver, you can follow the steps below:

  • Press Windows + R on the desktop screen.
  • Type devmgmt.msc and press ENTER.
  • Expand the printer drivers and do a right-click on the driver and select Properties.
  • Go to the driver tab and click driver RollBack.

  Can I assume that you use a parallel cable to connect the printer to the computer.  If you do this is a known problem that can be solved.  Go to Device Manager and then click ports.  Double-click the lpt for the printer port, and then click on device settings at the top.  Change the default setting of the middle box checked in the box below to use any available interruption. I would also check the legacy down.  If necessary, turn the computer off and then turn it back on, but most of the time this solves the problem without a reboot.

• When perform a reset of the printer

  Hello community,

  There were positions there were people said they have disconnected the printer or he did a partial reset and the printer does not work or do not know what to do and they tried to unplug.  There is a right way and a good time to do this. And this process is a reset.

  1. a reset is not usually the first step to take when you encounter a problem with the printer. Usually, there are there documents that have steps to try the first as searching for debris or re-seats ink cartridges or more steps according to the error message or the symptom that the printer is having troubleshooting.  You do not want to fill these first because some steps are placed in order to fix the process. If a step takes care of the problem, we stop there and not continue troubleshooting.

  (2.) A hard reset is for hardware issues and error messages. They try to put the printer in a known working state, if possible. As a hard shut down on a computer. It is not something we do all the time.  With a hard reset without user settings are lost. This is not the case with all the resets and it is necessary to know the parameters that can be lost when they do a partial reset, is an example of what is lost with a partial reset fax memory is cleared on this machine. It is better to know what will be lost before a reset.

  I just wanted the coverage and warning on some of the elements that come with reset. It is important to know when to do a reset and what may be lost.

  As usual, I hope this helps out! Good impression!

• m276n: print from a mobile device using a wired connection on the printer

  Hello

  I am considering buying the printer m276n for use in the home. I have a small Home Office on the top floor of my house which is out of range of my wifi signal but has a wired connection to the same router that broadcasts the wifi signal. I want to put the printer and connect it via a wired connection to the network. I know that it works perfectly for all windows home computers that are attached to the same network (wired and wireless), as long as I give you a fixed IP address to the printer.

  But since we use mobile devices more and more (apple and android) it will be a nice to have to print those as well. I watched Eprint Airprint movies, but all tell me that the printer must be connected wireless. Is it a necessity or my proposed wired installation will work just as well?

  Hi @MartijnS ,

  I see by your post that you would like to know if you can use the ePrint Airprint functionality with the printer and when it is configured on the network via an Ethernet connection. I can certainly help you.

  The ePrint and Airprint feature work when a printer is connected to a network. It can be wired or wireless to the router.

  Here is the document with a little information for print from an Apple Mobile Device.

  The documentation shows also wireless, but again, it works through a wired too.

  I hope this helps.

  Have a great day!
  Thank you.

• reset the settings to the printer... still no print... more haven't added any items to the menu bar... they went

  reset the settings to the printer... still no print... more haven't added any items to the menu bar... they went bar & customize window title bar changed...

  By default Firefox will be "reduced to adjust." You who can disable in layout in a regular window or in print preview, but it's hard to call Preview in the window pop up in print, because the menu bar and the toolbar are removed. If it is a common problem, you can use a different add-on (!) which puts the print preview before printing and Page Setup on the shortcut menu.

  I have not used for some time, but I hope that it always works in Firefox 29: https://addons.mozilla.org/firefox/addon/printprint-preview/

• Help uninstalling the printer HP 3050 J610 series

  Bought the HP 3050, tried installing the software. When he came to plug the USB cable from my computer would not recognize the USB. Shortly after my mouse (which was plugged into the USB port) stopped working, my expansion drive (USB) was more accessible. I tried to uninstall the HP software and it would not allow me. He told me that I needed service Pack3 on my computer that I've had. I returned the printer and now CSR from HP will help me NOT uninstall the program that crippled my computer. Can someone help me?

  Hi shawnbarker924,

  We recommend that you restore the computer to an earlier time and check the result.
  See How to restore Windows XP to a previous state

  Once you have restored the computer, try to reinstall the HP printer and check the result.
  Note: We recommend that you follow the HP printer with the printer installation guide/manual to install successfullyOR check HP site for instructions.

  See also Add a printer attached to your computer

  For further assistance, contact HP Support Forums.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photosmart 6520: 6520 Photosmart printer stopped printing black after changing the print cartridge

  There was a similar position two years ago. After changing the cartiridge (564XL) black printing, the printer will not copy documents. He behaves as if I placed a blank sheet of paper on the glass. I can scan the document and print the .jpeg, but not the document. The print quality of everything else is mediocre - very light on blacks, even though the colors are fine. I ran through all the diagnostic tests and he told me that the printer is fine, although the black box on the diagnostic page is empty. The difference between my printer and the one in the previous post, it's mine is 18 months and longer warranty. It has been little used. In the previous post, none of the solutions have been proposed, but apparently HP has replaced the printer. Any suggestions, or is this device intended for scrap?

  Try youtube videos here.

  https://www.YouTube.com/results?search_query=Photosmart+6520+print+head

  Looking to learn more.  If no joy, your printer is toast.

• "Lexmark S600 Series is currently in use. Wait until the printer has finished printing and then uninstall. »

  Original title: Lexmark printer

  Hello

  Thank you for helping me to get my laptop working again - after contacting the Microsoft Community, Microsoft and my ISP, my email seems to work so I can get all my incoming messages.

  But I'm still having a problem printing.  I tried to uninstall the Lexmark S605 and I get the message error "series Lexmark S600 is currently in use.  Wait until the printer has finished printing and then uninstall. "I get this message even if the printer is turned off and unplugged.

  Before I tried to uninstall, I tried to update the drivers from the Lexmark site and it says the update was successful, but nothing prints.  Printer is no longer supported by Lexmark.  Wireless connects, but I have also tried to make it work using the USB connection.

  Printer print wireless from office, but not my laptop.

  Does anyone have an idea on how to uninstall the Lexmark program?

  Thank you

  Agnes

  Restart your computer and check the queue to printer in the Notification area, as suggested.

  Click on the printer

  Cancel all Documents

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• Queue: print jobs are automatically send to the printer

  Original title:

  Queue

  I often work on the laptop when I'm not at work.

  My laptop I send jobs to the printer to work. The next day when I turn on the computer in my office, jobs are automatically send to the printer.

  Printer at work has changed to a new one (Minolta) and I can't do this anymore.

  What I can do!

  Thank you

  If you have been sending documents to the specific printer then you should be able to start the computer when you are at work and locate the printer in devices and printers. Right click on the printer and choose to see what's printing. When the print queue is displayed with your documents, choose printer, printer to use online.

  Note that older documents which have kept the printer used previously (Word documents and Excel workbooks are two examples of programs that keep the information on the printer), and then you should make sure that you send the print job to the printer.