I put the folder from the HARD drive to another HARD drive?

Similar Questions

• put the HARD drive in the optical drive stock

  Hi all

  I'm sorry if this is redundant, but I couldn't find the answer to any where or through telephone Support from Lenovo.

  I received the W530 with stock 500 GB HARD drive, but I want to replace it with the Pro of 840 Samsung SSD and put the HARD drive in the optical drive. I just restore the image from HARD disc for my SSD orginal (now in the original HARD drive box).

  At first I thought that I just leave the HARD drive in the original Bay and use the optical drive for the SSD, but since I use the SSD for the OS, and I want to use the DVD player sometimes, I thought I should put the SSD in original HDD bay and the HARD disk in the optical drive.

  I'm sure I've read that a lot of people did it with success, but I do not know much about computers and have never done nothing wise hardwear. I tried to put the HARD drive in the caddy Newmode U.S. optical drive, but it wouldn't fit (the screw on the caddy heads are too big). I think it's because the HARD drive still has the metal casing on it. I am worried, however, that if I remove the caddy, it voids my warranty, and above all, I am wanting to make sure it is the correct and safe way to the stock HARD drive in the optical drive.

  I put the rails HARD original on the SSD drive rubber because it is in which Bay but you have no other rails to the HARD drive in the case of the optical drive, and I don't even think he would fit in.

  So, it's OK to remove the carriage on the stock of HARD drive and put it in the optical drive without any kind of rails or protection (but attach it to the optical drive with the supplied screws caddy)? I think that's what I have to do anyway with the SSd, if she had to go into the optical drive.

  I am also an upgrade of RAM, but the keyboard under the bottom access RAM screw is stripped, so I can't remove the original RAM (it is under keyboard) and use the optimal 0 and DIMM slot installation 1. Any ideas?

  Thanks for your time, and once again, sorry if this is very basic.

  Change hard drives and memory do not void the warranty.

  The DSS must be installed exactly as the original HARD drive was, with rails caddy and rubber.

  The HARD drive in DVD case must be inserted with the 4 screws with the caddy, nothing else.

  To remove the stripped screw, you must use the small (jeweller preference) needle clamp with extreme caution, or slowly drop the screw head to create a new location. The second option is more dangerous because it produces small deposits of metal. If you can't do it yourself, ajeweller could do this easily for you.

  Good luck!

• My MB died and after to put the HARD drive in the new XP machine crashes before the activation screen may appear.

  Original title: XP Pro crashes when MB died and move new HDD PC.

  My MB died and after to put the HARD drive in the new XP machine crashes before the activation screen may appear.

  I can access the HARD drive if I boot from another HARD drive (delivered with the Machine).  Windows just hangs.

  Thanks for any help...

  Hello

  If you try to boot from the hard disk on which windows was installed by using another computer and then, you will not be able to boot from it. You can try to perform a Windows XP repair install and check.

• Re: Can Satellite A100-172 - I put the HARD drive?

  Im just wondering what what can I put the HDD for my A100? The hard drive now is a 120 GB and its useless at this point due to a problem I had with it.
  I thought I'd go with this one, but I don't know about policy of hardware upgrades from Toshiba.

  http://NCIX.com/products/index.php?SKU=42252&VPN=ST9320423AS&manufacture=se agate

  Thank you

  Valentine's day

  Hello

  I agree with Akuma. You must take the HARD disk at 5400 RPM. It should be pretty fast and produces less heat. It is good for office and multimedia applications.

  I hope you enjoy with your new HARD drive. ;)

• Satellite 1900-303: can I put the hard drive 120 GB

  I have a S1900-303 and I think to raise the 120 GB hard drive. What are the problems, if any, are that I meet and I can do froom the Toshiba startup disk or do I just install XP from a XP disc?

  Hello

  That I myself remember Satellite 1900-303 has been delivered with the 30 GB HARD drive.
  So, in my opinion, 120 GB HARD drive size is too big and I presume that the BIOS of the laptop will not recognize the HARD drive!

  I think you can use a 40 GB, 60 GB and a 80 GB HARD disk.

  PS: you must search the HARD disk with the IDE (ATA-5) increased!

  Good luck and have a nice day

• Can Tecra M9 - I put the HARD drive?

  I currently own a * Tecra M9 - 15I * (part PTM91E-04R03TEN No. - discontinued model).

  When I bought the laptop, it came with a 120 GB HARD drive. I am running Windows Vista Business which fills almost half of the hard drive. I want to upgrade the HARD drive because I think the upgrade to Windows 7.

  Is it possible to upgrade the HARD disk? If so, what are the compatible HARD drive options? If I do not change the HARD drive, this will affect the status of the guarantee of the laptop? for example, I currently have a 3 year warranty and the warranty upgrade HARD drive Toshiba?

  Hello!

  Of course you can upgrade the HARD drive on your laptop and this doesn t affect the warranty. HDD upgrade isn't complicated and so it can be done by the user.

  To swap the HARD drive, you need only remove the screws to the HARD drive Bay and remove the HARD disk cover. Then you can see the HARD drive and swap it.
  I don t know you, look in your user manual. You will find interesting information and photos on this topic.

  Theoretically, you can buy each HARD drive you want. On interface SATA there is no capacity limit.
  I have good experiences with Hitachi and Seagate hard drives.

  Good bye

• Can satellite M70-337 - I put the HARD drive?

  Hi all,.

  I have a Satellite M70-337, the vehicle currently has 40 GB of hard drive. The laptop has served me well and I want to upgrade the hard drive 100 GB +, anyone has done this?

  If Yes please advise on the type of hard drive required and their availability. I have 2 GB of RAM and want to run Windows 7 on this computer.

  Hey mate,

  Of course you can upgrade the HARD drive why not? :)

  AFAIK Equium M70 already use hard drives with Serial ATA interface. This means that you must buy a 2.5 HARD drive with this interface.
  For example, a 120 GB model should work!

  In my view, it is irrelevant, what type (manufacturing) that you choose. There is no major differences, but I have good experiences with Western Digital.

• Can satellite A100 - I put the HARD drive with 7200 RPM model?

  Hello

  I have a Satellite A100-044, I would spend my the 120 GB HARD drive to a more large (250 GB or 320 GB).

  A 7200 RPM would work on this subject? It seems Web compatibility sites they show 5400 RPM more, I would like to set up my laptop for recording/mastering so music wants a fast machine, I don't really mind if it consumes more energy...

  Any thoughts?

  Thank you
  Stone

  Hello!

  Of course, you can swap the HARD drive with a model more fast using 7200 RPM. But as you say, it takes a little more energy. The new HARD drive should be a little faster, especially access time should be lower.

  250 GB or 320 GB should be possible; you need a HARD drive with SATA interface.

  I hope I could help a bit.

  Good bye

• Put the hard drive Dell studio xps m1530?

  My dell studio 1537 laptop computer does not light so I bought a second hand xps m1530... the hard drive of the studio is suitable for the xps and it would work ok?

  The drive works at the hardware level - you will need to reinstall Windows and all your programs and restore your data, however.

• Support - KISS and put the entire driver, unzipped download

  Wusb300n access point with 2 small antennas.

  Finally managed to locate and download a driver, but can't open it. Cannot locate the file with the option of manual installation of Windows 7.

  Shame on me for being incompetent. Shame on LINKSYS for not having a driver with a simple automatic installation routine.

  My laptop has no CD drive... Am now online with a LINKSYS USB Silver Stick (the automatic driver installation).

  For the past ten years, I would consider even because the right software and the support of other brands. But today, some devices are unable to run their CD.

  001A7038C94B MN T007307402 "Made in 2007" but bought in 2014.

  Have traveled to Southeast Asia, where the wifi is often doubtful and unreliable. Bought a huge antenna CISCO, but wishes to LINKSYS could bring out some superior directional antenna gain * beep * access points for laptops.

  Chris

  I have read the terms of this adapter and it does support Microsoft Windows 2000 and XP. Maybe that's the reason why there is no driver for Windows 7. However, you can try running the Windows XP compatibility mode. Right-click on the file and go to properties.

  On the Linksys website, looks like the firmware is no longer available for download. There are rules that govern the use the firmwares or drivers, so sometimes the manufacturer of removes the firmware of older devices to their Web site.

• How to access the files after you put the hard drive in the external case

  I dropped my laptop and it is split.  I bought an external case for hard drive, only to discover, when I try to access the files, I'm not authourized to do.  I know the password, how do I access files, without having to pay someone a large sum of money, "with no warranty.  When I try to access it using the security feature to take possession of the files, they always come to the top an unauthorized.

  Hi martinez_gerald,

  In addition to the suggestion of Chafflube, you can consult the following KB articles and check if it helps.

  1. What is the exact error message you get when you try to access the files?

  You can read the following article and check if it helps:

  Error access is denied"when you try to open a folder

  http://support.Microsoft.com/kb/810881

  Also read the following article:

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What is the best way to copy all the files from one hard drive to another?

  Old disk 60Go new 320 GB drive.  I want to do the new replacement for the old disk drive.

  Old disk 60Go new 320 GB drive.  I want to do the new replacement for the old disk drive.

  Use disk cloning software.

  The safest way is to use an external hard drive enclosure to maintain the new disc during the cloning operation.  These come with interfaces USB or e-SATA to IDE or SATA interfaces for the drive and the computer.  Be sure to get the correct type.  If you have an available internal drive Bay, you can put the new drive it for the cloning operation, but do NOT restart with two connected drives.  After everything was settled down, you can mount the old disk of 60 GB inside, format and use it for storage of backup.

  Cloning (copy to disc) software may have been bundled with your new drive or may be accessed free of charge from the manufacturer of the new command.

  Otherwise, here are a few apps cloning that I have used myself or have been recommended by members of the community:

  Acronis True Image Home
  Casper
  Paragon Drive Copy
  EASEUS Partition Master

• Disk error hard 3F0 - but the hard drive is readable from another computer

  I have a HP pavilion DV7-3060us running Windows 7 home 64-bit

  This morning, he decided to not start and gives me an error 3F0 complain about a missing boot disk.

  I have a disc that is cloned several months ago that I put there and that he can use at the moment.

  I put the 'wrong' drive in an external enclosure and checked that I can see from another computer.

  I tried to run a chkdsk on it that 'fixed' some mistakes, but I still get the error 3F0.

  I would really like to fix broken files which do not allow the system starts.

  Any suggestions on how to do it?

  Thanks in advance (and I will credit good answers)

  I don't know what I'm doing, but take a look at this article

  http://mikemstech.blogspot.com/2011/12/how-to-perform-offline-system-integrity.html

• My Vista desktop crashed and I need to access the hard drive on USB. Permission is denied

  I have a desktop Vista raid 1 and raid system crashed.  I put a new hard drive and no Vista Recovery.  I put the old drive in an enclosed and when I try to open it, I get "you don't have permission to access this drive."  I have the passwords for the player but do not know how to access.  Any ideas?

  Hello lightly,

  Here are the steps to change the ownership and permissions:

  1. Right-click on the file or folder, click Properties, and then click the Security tab.
  2. Click Advanced, and then click the owner tab.
  3. Click Edit, and then do one of the following:

  · To change the owner to a user or group that is not listed, click other users and groups , in area enter the object name to select (examples), type the name of the user or group, and then click OK.

  
  To change the owner to a user or a group is listed in the change owner to box, click the new owner.

  4. If you want to take ownership of the contents of the folder, select the check box Replace owner of subcontainers and objects .

  5. click OKand then click Yes when you receive the following message is displayed:

  You are not allowed to read the contents of directory folder_name. Do you want to replace the the directory permissions with permissions granting you full control?

  All permissions will be replaced if you click Yes.

  Note: folder_name is the name of the folder you want to take charge.

  6. click on OKand then reapply the permissions and security settings that you want for the folder and its contents.

  Additional remarks:

  • An administrator can take ownership of any file on the computer.
  • Affecting the ownership of a file or a folder might require that raise you your permissions using user access control.

    Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Tecra A2 used power up after upgrading the hard drive

  I have a Toshiba Tecra A2. Hard drive 60 GB factory begins to run out, so I installed a new 160 GB drive.

  But the system will not power on with the 160GB inside.
  When I press the power button the AC light goes from green to orange and blinks short short short Long Long Long in this sequence

  If I put the original drive, it does not supply power to the top.

  Any ideas what I can do about it? I got tired of updating bios on Toshiba website, but he has not made a difference.

  Thank you

  Hi DenSys,

  > Any ideas what I can do about it?
  In my opinion, the case is clear: either this new HARD drive is defective or it s is not compatible to your laptop. But if everything works with the old HDD, you contact the new 160 GB back

  Your laptop has an IDE interface for HARD drive? If so don t forget that it will be able to manage the hard disks up to 128 GB only due limitation LBA 28 bits. In order to check another model.

• Satellite Pro S300L: howto get rid of the HARD drive password

  Hi all

  yesterday I thought it was a good idea to put the HARD drive on this new computer laptop password.
  But now I want to get rid of him again. I remember, I can't find how to turn it off again.
  The ACPI Bios version is 3.00
  I have "updated" with a program from this site to version 1.10.
  No change.

  Someone knows how to remove this HDD user password or disable the system that asks?

  Thank you
  Thomas

  Hello

  I know, you can't remove password disk hard if you forgot. Please, read this article:

  http://APS2.toshiba-tro.de/KB0/FAQ9202JG0000R01.htm#