I reinstalled windows 7 in my dell with a hard drive recently changed. all these mistakes came after him: "windows has detected a problem with the generic bluetooth adapter," continues...

Similar Questions

• Satellite A500 - 1C0 - Windows has detected a problem with HARD drive

  Nice day
  Laptop shows me that Windows has detected a problem with the HARD drive. The laptop is running slow and chops. And when you turn it, it shows me Smart failure predicted on hard disk 1. Toshiba MK-5055GSX - (S2). Can you help me? (I m, CZ)

  http://img684.imageshack.us/img684/8434/smartm.jpg

  Hi Konyga,

  If you already have a warning on the internal HARD disk before Windows starts I would recommend sharing it and backup all data as quickly as possible.

  Is your laptop still under warranty?
  If Yes, you can get a new HDD to an authorized service provider. It would be free because it s covered by the warranty. All you have to do is contact with an ASP.
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

• Windows has detected a problem with Skype and close it down, how can I know why. Also I can't get any video on Skype

  I uninstalled Skype and reinstalled Skype 5.3 still have no video. but I have no audio. with the opinion above of Windows

  Hi PAUL MULTIPLIED,

   

  1. for how long have you been faced with this problem?
  2. do you receive any error messages?

   

  If the problem is specific to Skype I would ask of contact you Skype support for assistance on the issue and the check-

  http://Forum.Skype.com/

   

  I hope this helps.

• Carpet * a UJ-8315: error message - windows has detected a problem

  I am trying to copy a movie on a dvd/cd and the windows still display the message: windows found a problem... what could be wrong?

  Hello Leandro,

  Please could you give more details of how you are trying to copy the movie. If the original is on a DVD, so there may be copyright protected that prevents you to copy. If it's a movie you did yourself with a video camera, then there may be a problem with the format that you use when you try to burn on a DVD/CD.

  Kind regards

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• Windows has detected a problem with NVIDIA GeForce 8800 M GTS. Code 43

  I was playing a computer game, when suddenly the game crashed. I restarted my computer to see that I can not play because my computer disabled my NVIDIA, saying only he reported code 43 problems.

  someone please help?

  Try to start in safe mode and selecting «last good...» »

  And since you have a portable computer have you updated the drivers (chipset & graphics) of your computer support site mobile phone manufacturers?

• Windows has stopped the device because it has reported problems. Code 43 with generic bluetooth adapter.

  Windows has stopped the device because it has reported problems. Code 43. Something with the generic bluetooth adapter. What should do?

  Original title: Please help

  Hi JovanaNesic,

  One of the motors controlling the unit notified the operating system that the device has failed in some way.

  Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  If you have already run the Troubleshooting Wizard, you can view the documentation for the hardware for more information about diagnosing the problem.

• Need to format the drive due to some problems and having to reinstall Windows 7. I could use the same product key

  Original title: Windows 7

  I am using Windows 7 Home Premium 64-bit SP 1 that have previously been installed then bought my laptop. Product key number is fixed under the laptop.

  I need to format my drive due to some problems and having to reinstall Windows 7. can I use the same product key and where can I get the installer of Windows 7 because I don't have it.

  Thank you

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• Manually reinstall Windows XP and can not find the product key.

  Manually reinstall Windows XP

  Manually reinstall Windows XP and can not find the product key.
  What to do to replace the product key.

  Where to find your product key
  You can find your Windows product key on the label supplied with the package provided with your copy of Windows. The label can also be on your computer case. Activation of the pairs with your computer, your product key.
  Lost or misplaced product key (certificate of authenticity)

  http://support.Microsoft.com/kb/824433

  How to get a replacement product key?

  To replace a Microsoft product key, you must contact Customer Support and Microsoft. To locate the phone number, visit the following Microsoft Web site:

  http://support.Microsoft.com/default.aspx?scid=fh; EN-US; CNTACTMS

   

  For more information on this topic, visit http://support.microsoft.com/kb/811224

• W7 Dell Inspiron N5050, disorder of generic Bluetooth adapter; "Windows has stopped this device because it has reported problems (code43).

  I'm getting generic Bluetooth adapter, "Windows has stopped this device because it has reported problems (code 43)." It shows at the beginning > Device Manager > portable computer icon, like a yellow! -in the icon of the computer. I have and you use a wireless mouse and I don't know if that is considered to be "Bluetooth" or not. I don't have any other element without wire/Bluetooth that I use. I connect to wireless internet. When I delete the device, after a reboot it comes back with the same problem. Troubleshooting found nothing to help. I did a restore to windows from the hard drive partition, (turns out was unnecessary, problem turned have been bad screen I should have caught before to do reinstall). Month? After that this problem started. I mention this to try to be through details. I would like to remove the adapter - or - change something - or - what ever? to stop it. Thanks in advance.

  Thanks, I went to the start menu > type devmgmt.msc > left click on the result > right-click on Bluetooth radio > click left adapter > click on disable /OK. Restart and the warning went and did not return. It's not all "deleted", BUT if the warning is under control, be it. Out of sight now so happy, happy, it is me. Thank you

• Windows has encountered a problem communicating with a device connected to your computer.

  When you start the computer laptop, windows Boot Manager appears.

  He reads

  Windows has encountered a problem communicating with a device connected to your computer.

  file: \Boot\BCD

  status: 0xc00000e9

  Info: an unexpected i/o error has occurred.

  When I I go through F8, safe mode, last known good configuration, running in debug ect mode.

  running in safe mode past with him, freezes for abit in the past to a black screen with just the cursor and the Center recovery running VAIO, last good configuration, known debug mode. This windows is loading files, then the windows boot screen were it freezes then goes to a black screen with just a cursor.

  Place the cursor, I am unable to do anything else on this screen.

  is it far from getting the laptop to function normally again or is it finally the end of his life?

  the laptop is a sony VAIO E series (VPCEA25FG) running under windows 7.

  Hello

  The error - an unexpected i/o error has occurred, status: (0Xc00000e9) is a material error in the BIOS of your computer.

  Basically, it's to tell you that the computer is not able to communicate effectively with the hard drive.

  Try the Startup Repair.  Startup Repair is designed to prevent a reinstall tedious to diagnose and repair problems that prevent Windows startup.

  To run the Startup Repair tool, see the links below for more details:

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  
  

  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  I also suggest you to update the BIOS. Update the BIOS, contact the manufacturer of the system!

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  To ask your question in the Forum of Sony, refer to this link.

  http://community.Sony.com/?XID=M:header:eSupport

• Windows has encountered a problem with the DVD/CD on Qosmio G20

  has obtained a g20, problems with the cd player. When I go to copy or move music or pictures on my cd/dvd, I get a pop up saying windows has encountered a problem with this drive...
  can someone tell me what is happening.
  Thank you

  On this path, it is not easy to say anything. Try to remove the drive from Device Manager, and then restart the device. The unit should be recognized and installed correctly.

  If you want to create data CDs using windows options please check disc recording option. Check the properties of the drive and check option under the recording tab.

  Good bye

• I can't sync Windows Media Player with my MP3 player, it says "Player Windows Media has encountered a problem during the synchronization of the file to the device".

  Original title: windows media player

  Whenever I try to download songs on my mps I do not sync my songs. Whenever I click on the button of synk sart on Windows Media Player little pop box saying "Windows Media Player has encountered a problem during the synchronization of the file to the device. For additional assistance, click Web Help. "and when I click web help it does not at all help me please someone help me!

  Hello
   
  1. with the device that you are trying to synchronize?
  2 - is the first time you try to sync Windows media player?
   
  Windows Media Player has encountered a problem during the synchronization of the file to the portable device. Because this error can occur for various reasons, there is no single solution.
  To resolve the problem, try to disconnect and reset. See your device manual for specific instructions on performing this procedure.
   
  In some cases, this error may occur if you try to synchronize a file hidden on a device. To resolve this problem, delete the file in the sync list or change the properties of the file so that the file is not hidden.
   
  For more information, see the article below,
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.6001.7000&ID=C00D1236&ContextId=211&OriginalID=C00D1179

• Windows has encountered a problem communicating with a device connected to your computer. Status: 0xc00000e9.

  * Original title: 0xc00000e9

  Hi all

  I had a problem - would be great if someone could help me!

  =====

  Windows has encountered a problem communicating with a device connected to your computer.

  This error...

  File: / Boot/bcd

  Status: 0xc00000e9

  Info: An unexpected i/o error has occurred

  ==========

  I press ESC = exit or enter = continue it tries to start, but eventually back to the black screen. So I can't pass this screen. I do not of hava a recovery for Windows disk... And the laptop is a Sony Vaio with Windows 2008. A couple of days, I have connected to my work through the laptop environment and forgot to close - battery went down--and now this...

  Can anyone help?

  Please see the message (response) by Afsal Taher:
  http://answers.Microsoft.com/en-us/Windows/Forum/all/new-computer-running-Windows-7-unexpected-IO-error/46b4fc7a-9a83-4db2-9a00-dca512797e61

• How can I reinstall windows 7 prof back on without the key?

  greatfull for some advice please

  If factory reset my book, return to windows 7 basic, how can I reinstall windows 7 prof back on without the key. I downloaded from windows upgrade when I got it, and he will return on the same computer it was installed on.
  Thank you.

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade from Windows 7 Home Basic to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

  Your product key for Windows 7 Professional should have been sent to your email address if you bought it on the Microsoft Store.

  Find your key product if your purchase of Microsoft Store:
  http://store.Microsoft.com/Help/FAQ?Err=T2#AT2

  If you have Windows 7 Professional installed, you can retrieve the key now:

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)

  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features.

  There is no Express of Home Basic Upgrade to the professional, so you have bought a license for sale at retail.

  Because it has been previously installed, you may need to reactivate by phone:

  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.
  http://support.Microsoft.com/kb/950929/en-us