NO PROMPT WHEN PUT THE IPHONE INTO COMPUTER

Similar Questions

• I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024. Restart gave a different stop error message: 0 x 00000050.

  Original title: Blue screen problems - Stop 0 x 24 and 0 x 50

  I'm not being updated hardware or software on my Dell Latitude D8380.

  I ran the Windows tool to check if the laptop is suitable for upgrading to Windows 7, but did not install any software.

  I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024 (0x001902fe, oxba4f7948, 0xba4f7644, 0xb9d31ae8) ntfs.sys address b9d31ae8 base at bpcef000, datestamp h8025be5.

  Restart gave a different stop error message: 0 x 00000050(0xffffffff,0x00000000,0xba1bef42,0x00000000) i8042prt.sys address ba1bef42 base at ba1b8000, date stamp 48025c 67.

  Please can you help. Thank you, Sue Dixon

  Hello

  Step 1: Check if you are able to boot in safe mode. If you are able to boot into safe mode, and then try to perform the clean boot to safe mode and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Run the check disk hard disk command. (You will be able to try this step if you are able to start in safe mode or in normal mode with success)

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Let us know the status of the issue.

• I try to restore my ipod, but it wants me to enter the password on the ipod but my ipod is disabled, ive even put the ipod into recovery mode

  Im trying to restore my i Pod but 5th generation. I put my ipod into recovery mode, but when I try to restore it, it asks me to enter the password on my ipod but I can't because the id ipod disabled.

  People with disabilities
  Place the device into Recovery Mode iOS
  https://support.Apple.com/en-us/HT201263
  and then connect you to your computer and restore via iTunes. The iPod will be erased.
  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled
  https://support.Apple.com/en-us/HT204306
  If the recovery mode does not work, try the DFU mode.
  How to put iPod touch / iPhone in DFU "Karthik doodles."
  https://geekindisguise.WordPress.com/2009/07/16/how-to-put-iPod-touch-iPhone-int o - dfu mode.

  To learn how to restore:
  Use iTunes to restore your iPhone, iPad or iPod to factory settings
  https://support.Apple.com/en-us/HT201252
  To restore backup see:
  Restore your device from an iCloud or iTunes backup - Apple Support
  https://support.Apple.com/en-us/HT204184
  If you restore from a backup of iCloud apps will be automatically downloaded. If you restore from backup iTunes, applications and music must be in iTunes since synchronized as music media library and apps are not included in the backup of the iOS device what iTunes does.
  You can re-download most of iTunes purchases by:
  Download after purchase from the App Store and iTunes Store iBookstore
  https://support.Apple.com/en-us/HT201272

  If no problem what happens or doesn't happen, and when in the instructions? When you get the iPod into recovery successfully mode and connect to iTunes on the computer should say that it found an iPod in recovery mode.

• His HP Pavilion dm4-2070us stop when put the socket for headphones

  Hello

  When I remove or put the headphone jack, the sound stops for work in the speakers and headphones. To put it back, I have to close the player (music, video, or audio stream from the web site) and start it again, but if the headphones are pluged it works very well, if I remove the jack stop once again, it happens in the reverse case.

  Could you please tell me the solution for this problem?

  Info for laptop

  IDT High Definition Audio CODEC

  Genuine Windows 7 Home Premium 64 - Bit SP1

  Intel Core i5 - 2410M

  6 GB of system memory

  Thank you

  Roberto

  I solved the problem by reinstalling the driver.

• Is no longer able to sync the iPhone to computer

  Title: sync iphone to original on my computer... it was but not either... I would like to add music from my computer to phone

  I need to know how to sync my iPhone to my lap top so I can add music, it will not sync to my computer, it serves to...

  Ask the iPhone support.

• How to put the form into insert mode without clicking a button insert new record

  Hi all

  I use apex 4.2 on windows, internet Explorer 10 on oracle 11g R2, all 64 bits.

  I'm creating mobile applications.

  I have a list page, I put the links on this page.

  one of the links is a form of opening and passing some values that form.

  the form I open with custome plsql trigger to generate the primary key.

  I do not include an Insert button in the form, I call you, I want to just the user to type something in the column remarks of the newly opened form.

  and when the user clicks the Save button, the folder must be inserted as a new record in the table of underscore.

  now, the pk is not because I do not press on the Insert button, since I do not include the Insert button.

  now when I navigate my list Page by clicking on the point list and in the newly open shape, I enter some data in the Notes field and click on the button, save

  It is not saving the table or give any error?

  How to solve this problem?

  Kind regards.

  Mahjoor,

  If your form is wizard generated then

  Change your suite save button and put

  

  and confirm that regardless of the Page item Insert Source values contains more

  

  If you manually insert values shaped then write a Page process to insert this page elements values in the table

  during the click on the button Save.

  I hope this helps you.

  Leave.

• put the value into the correct column according to (complex) date

  Hello
  
  the query I'm doing is very complex (for me, of course), so I need help from you experts...
  I have a table as below
  
  ID | name | value | Date
  1. Ranieri | 254,2 | 2009-01-21
  2. Jorge | 252,5 | 2009-03-23
  2: Ricardo | 584,5 | 2009-04-21
  5. Fabricio | 478.2 | 2009-02-12
  4 > Felipe | 454,5 | 2009-01-30
  7. Leonardo | 484,6 | 2009-02-15
  8. Marcelo | 854,4 | 2009-02-04
  
  First of all, I need a query that separates each month on both sides, so for this year, I'm having columns like below
  
  jan01-15 jan16-31 fev01-15 fev16-28 mar01-15 mar16-31 apr01-15 apr16-30 and so on...
  
  P.S:this query must deal only with the current year
  
  So, I need the result is the union of these two tables to be as below
  
  ID | name | value | Date | jan01-15 | JAN16-31 | fev01-15 | fev16-28 | Mar01-15 | mar16-31 | APR01-15 | Apr16-30 and so on...
  1. Ranieri | 254,2 | 2009-01-21 | 254,2 |
  2. Jorge | 252,5 | 2009-03-23 | 252,5 |
  2: Ricardo | 584,5 | 2009-04-21 | 584,5
  5. Fabricio | 478.2 | 2009-02-12 | 478.2 |
  4 > Felipe | 454,5 | 2009-01-30 | 454,5 |
  7. Leonardo | 484,6 | 2009-02-15 | 484,6 |
  8. Marcelo | 854,4 | 2009-02-04 | 854,4 |
  
  I 'don' t know if my problem is very clear, but for each row based on the column 'date', I need to put the value in the right column "part of month".
  
  Is there a way to do this?
  
  I appreciate a lot of help...
  
  Thank you
  
  Published by: Ranieri on 09/02/2009 06:20

  Hello

  This is called a pivot; Here's how you can do:

  SELECT     id
  ,     name
  ,     value
  ,     dt          -- date is not a good column name
  ,     CASE (WHEN TO_CHAR (dt, 'MM') = '01' AND TO_CHAR (dt, 'DD') <= '15' THEN value END)     AS "jan01-15"
  ,     CASE (WHEN TO_CHAR (dt, 'MM') = '01' AND TO_CHAR (dt, 'DD') >= '16' THEN value END)     AS "jan16-31"
  ,     CASE (WHEN TO_CHAR (dt, 'MM') = '02' AND TO_CHAR (dt, 'DD') <= '15' THEN value END)     AS "feb01-15"
  ,     CASE (WHEN TO_CHAR (dt, 'MM') = '02' AND TO_CHAR (dt, 'DD') >= '16' THEN value END)     AS "feb16-28"
  ...
  ,     CASE (WHEN TO_CHAR (dt, 'MM') = '12' AND TO_CHAR (dt, 'DD') <= '15' THEN value END)     AS "dec01-15"
  ,     CASE (WHEN TO_CHAR (dt, 'MM') = '12' AND TO_CHAR (dt, 'DD') >= '16' THEN value END)     AS "dec16-31"
  FROM     ...
  

  If you are looking for pivot, you will have many other examples. Almost all of them combine several rows of the table in a line of output, so they use GROUP BY, an aggregate function, such as MIN or SUM. Your problem doesn't have that.

• Can I put the iphone 6s camera in the iphone 6?

  My camera of the IPhone 6 is bad. It's obviously inferior to a friends camera IPhone 6. So I wan't to replace it with a new module of the camera. Is it possible to use one of the IPhone 6? If so, I can the benefits of quality 4 k?

  Apple sells not serviceable by the user
  If you may find phones that are taken, stolen, or downright false pieces

• When putting the computer to sleep and then attempt to wake the computer, it has been turned off.

  Original title: win 7, will not wake up from slumber died

  Just installed a new ssd and reloaded win 7 and all updates. When I put to sleep and try to wake the computer has been turned off. Although the keyboard lights, but I have to push the power button and the computer restarts and displays the screen of abnormal termination. Help

  This is what I found. Installation of Win 7 and the corrupted BIOS. Re-installed both and everything works well.

  Thank you

• Put the Apps into folders on iOS 10 or iPhone 7?

  Hello

  When I hold the app so that it vibrates so I can drag to a folder rather that vibrate, it gives me an application drop-down options. I'm wanting to create folders and move applications in these cases is to say "work". How I make it work on iPhone iOS 10 or 7?

  You are maybe too hard (touch 3D) pressing when you should do a long gentle press to get applications to start jiggling?

  TT2

• Cannot put the screen into hibernation

  I recently installed Windows 7 using a new PC Gateway. Now, I can't get the display turns off when not in use. as I could in XP. My monitor is a new Samsung LED.

  What I want is to have the screen turns off after an hour or two of non-use and be able to quickly put back by moving the mouse or pressing a key. I tried to change all the settings for the screen savers and energy saving options, but the screen remains always lit throughout the day, even with no use for several hours.

  What I forget? Welcome to suggestions.

  Have you tried this:

  Start-> Control Panel-> Power Options-> choose when to turn off the display-> select your desired time in turn off display-> save changes

  Now your monitor should turn off once the computer is idle for the specified amount of time.

• Mail is deleted from the iMac when removing the iPhone

  When I delete messages from my iPhone, they are also deleted my mail on my iMac, but it does not appear the opposite effect.  When I remove it from my iMac, they remain in the phone so that they accumulate a lot a lot of emails.  Is it the way it is supposed to work?

  N °

  An IMAP email account must keep all synchronized devices.  Delete in one place and it is deleted in all others.

• iTunes crashes when syncing the iPhone and iPad

  I was not able to sync to my iPhone 6s or iPad 2 since the new version of iTunes. iTunes works fine until I connect iPhone or iPad and then it freezes. I have iOS on both and OS X 10.11.2 and 12.3.2.35 iTunes 9.2

  A software update was released for iOS (9.2.1) and OS (10.11.3) Thursday. Downloaded and installed both. Did not help.

• You can put the date into a file path?

  My program written spreadsheets. I want there to be a new file daily, entitled the days date, then the data added to the end of the day. Is any way to get the date issued by a ' get Date / Time String "and put in the path to the function"write the spreadsheet"?

  As is - anyone can confirm that a file path in a file writing worksheet is to open the file and one to come is saving and closing?

  See you soon

  Sam

  This better?

  

  As red Rooster have already said, use vi "string of Format Date/time" to not prevent elements of DateTime stamps that you need and also to choose appropriate delimiters.

  Keep in mind that ' / '&': ' are not allowed in Windows file names!

  Also to keep track of all your files in a folder, it is best to name your files 'Year-month-day"instead of the standard ' Monyh/day/year' (for Europeans at least ). This way you can easily find any file in a folder larger.

  You have really two different folders? One of the files before noon and the other for files after noon?

  If so keep this code.

  If not, modify this code!

• can I copy of content impossible when making the word into pdf file conversion?

  When I copy my signature (for paper copies) on a wordfile and I want it to be impossible for third parties to recover from the pdf file.

  How can I achieve this?

  Hi frankv.

  This isn't something that you can do during the conversion process. But with Acrobat, you can apply file security constraints, what would prevent people who look at the PDF of the copy of the content of the PDF file. See Acrobat help | Securing PDF files with passwords for more information. If you do not have Acrobat, we invite you to give it a try. You can download a 30 day trial of http://www.adobe.com/products/acrobat.html.

  Best,

  Sara