Shift key + symbols displays the wrong key

Similar Questions

• Loading the symbols in the wrong position

  Hello!

  My composition charges with my symbols in the wrong position, as if it does not load on the first frame of my calendar except the last.

  I'm not a coder and I've done a few projects dashboard but this is the first time I encounter this. This is also my first project since the last update, so I don't know if it has anything to do with it. I tried many combinations of AutoPlay switch and a stop action at the beginning of the timeline in the scene, or symbols, but no change.

  Any help is greatly appreciated!

  Ian

  My apologies! It seems that I was too hasty.

  I started a new comp and realized that leaving autoplay on and by placing a stop action initially IN my symbol did the trick.

  Detective Conan

• L50-B-27N satellite PSKTQE - pilot page displays the wrong divers?

  Hello Forum,

  I bought a Satellite L50 B 27N with the short code PSKTQE.
  I use this site to download the driver:
  http://www.Toshiba.de/innovation/Dow...jsp?service=de

  Is it possible that there is the wrong display drivers?
  For example the WiFi network is an Intel Dual Band Wireless-AC 3160 and not a Broadcom/Atheros one.

  If I install the graphics driver AMD I get the message that the driver has stopped working. I tried to install Blutooth and something else, but the number of damage not recognized in Device Manager does not drop. I think that the drivers do not correspond to the laptop.

  Is there a list of what I need to download drivers, or what I'm looking for everything manually?

  Thank you

  Peter

  The drivers are not wrong, but different L50 - B PSKTQE Satellite models could be fitted with different equipment; That is to say different WLan modules.

  Some of the units in charge Atheros, Broadcom or Intel (there are 2 different modules) wireless network adapter...

  If you need to download the right driver

• Adobe color, by clicking color theme displays the wrong color (PSD, I, iD, AE)

  When I create a new Adobe Color CC Web site color theme, sometimes the color theme seems to have a mind of your own. This has happened for the last few months in the I, ID, PSD and AE (CC 2015) I've just updated all the software to the latest version (Release 2015 3.0)

  I downloaded a link did not enter to my problem on my Vimeo here: Failure of the adobe color picker

  I create the color theme, then when I choose the color in After Effects, Photoshop, Illustrator, or InDesign, although the colors look correct and hovering on the color theme displays the appropriate 6 numbers and colours CMYK, color once I have create a form, or select a brush, color is incorrect.

  If I play with the theme long enough by changing a few values here and there, it seems to work. But for at least this color theme, I can't have the correct color without manually typing in color, although color Adobe theme library displays the value of the appropriate color.

  Anyone having problems with the color themes and color pick up?

  Thank you

  Chris

  If you don't want your color to change, use only RGB color Adobe cc. Do not click the CMYK option.

• One of my regular emails displaying the wrong sender name.

  When I receive an e-mail from the ancestry of insiders, it shows in my email list with the title of the correct e-mail and the sender Richmond SF Blog. I get e-mails from the blog of SF in Richmond and they present the correct sender. Enamel of ancestry initiated himself, the sender indicates correctly. It is only in the list of emails it appears fine.

  I have two senders in my address book and I checked the info on each entry. It is true in my address book.

  OK, you win. Go to the menu Tools > options > advanced > reading and display and cut while the option to display names.

• Windows xp professional sp3 general system control panel displays the wrong amount of system memory

  Have a Dell Optiplex GX280 running Windows XP Pro SP3 with 3.5 GB of memory. BIOS confirms the good memory installed, but the control panel > system > general tab displays only 2.99 GB of memory.  Is there a fix for this issue or Windows using only the first 3 GB of memory?

  If you have Windows XP with service pack 3 - it's a 32-bit operating system.  The most he could use is 4 GB and some of which will be used for overhead costs.  The most I've seen Windows XP with SP3 report was 3.85 GB of memory - although it is more common to see a 3.25 and 3.5 GB.

  Memory shared (with a video device) can also take off the total.  It's usually anywhere from 64 MB to 1 GB if the video device uses the system memory compared to (or in coordination with) committed memory.

  With Windows XP, however, have probably seldom got you much above 1.5 GB of memory space used without some graphics intense or video edition GOLD of virtual machines.  ;-)

  Essentially - there is unlikely to be anything to fix.  If you want to use/manage better memory, you need a 64-bit operating system (I'm not implying Windows XP 64-bit) and possibly a new video device.

• Table of contents displays the wrong fonts... Sometimes

  When I generate a table of contents, it generally works well, but sometimes text comes from the size and color of the text source instead of the assigned police of OCD.

  I have a my "TOC 1" paragraph style value 9/18 black points.  One of my headers is partially oversized and reversed text to white 36 p. It is not saved as a character style, just make it bigger.  Rather than follow the assigned table of contents 1 style, this text is available in white 36 p. I have other places where the headers are reversed and or resized and it displays fine in the table of contents.  In some cases, the table of contents comes in the color of the text source... but most of the time it comes of as it should be, as the color of the table of contents 1.

  Why the inconsistency?

  I keep digging and I found the answer. It's more than the "local formatting". It is "localpartial formatting" that replaces the table of contents style.

  I saw this initially because it was only a space empty at the end of the header which is different, so it was invisible to me.

  If the text in a header in the doc is exactly the same, no matter how it is modified locally, the TOC style is applied in its entirety.

  If any part of this text is different, the table of contents will be changed... BUT:

  Different changes apply to different parts of the line in the table of contents. So we can predict how some inmates / change will apply.

  If this is supposed to be a feature rather than a problem, it's a pretty bad; too many incompatible variables.

  The graph below shows some of the results possible.  At least now I know what is the problem and how to avoid it.

  

• Character palette displays the wrong font size

  I work with a card that has been created with GIS mapping software. For some reason, the sizes are wrong in the character palette. For example, type that is actually 5.56pt is show as .7pt

  If I reset the palette of characters, the size of the fonts and characters back by default (enchantress 12pt), but the size is in reality much larger than 12pt. There must be another place where the type is currently scaling, but I can't find it anywhere. Any help would be greatly appreciated.

  To make matters worse, if I copy the text to a new text box, type return to its correct size. It's clearly something to do with the box that contains. I'd rather not have to replace every occurrence of the text, because they are too many and placement is critcal in map data.

  Also, to clarify, I can say, the text block has not been weighed and both horizontal and vertical scale are 100%

  If it comes out of ArcMap then the best thing to do is to select all and any click using the arrows to the left and then click the right move.

• Why my transitions display the wrong part of the clip?

  Hello

  I work on a short film and succeed with several of my transitions. After you change the sequence in the first, I made color calibration via the direct link to SpeedGrade. The Lumetri of Speedgrade effects are applied to an adjustment layer on a track separate above original video clips. If I have problems with transitions (all cross dissolves) in my calendar. When one of them, they are all transition at a later stage in the second clip. As soon as the transition ends, it cuts to the appropriate location in the second clip. I hope that makes sense. If I disable the adjustment layer, everything seems well (other that the notes are not visible, of course). Remove the piece of the transition adjustment layer eliminates the problem, but there is an obvious reduction of the previous year to year.

  I did not notice the problem when I edited the sequence in the first, it's Speedgrade I noticed it first, and it now appears first.

  I don't know what could cause this problem. I have never worked with before adjustment layers and do not know much about them. Is there something I don't know that I should?

  Cameron

  Note: I use versions CC 14 of these two programs.

  Cameron,

  Don't forget that in the layer stacking on a clip in its layer panel or stacking layers adjustment and pliers of ranking or simply complementary or bottom-third/titles above the clip base, the top rail is what is 'seen' with the exception of any transparency you set for him. Put a black layer on top, you haven't seen anything below him... until you give transparency to the layer above.

  Adjustment layers stack (that I use all the time DL PrPro-Sg) with heavy changes that cause issues in transitions... GETS very complicated to adjust the opacity of the adjustment layers as you stack them. I've done it a few times... but it's so much faster to keep these kinds of adjustments on the clip base.

  Neil

• Firefox 5 displays the right fonts only in Mode safe!

  After upgrading to Firefox 5, I noticed it displays the wrong fonts (larger than they should - they look ok in Firefox 4.x, Chrome, Opera).

  The strange thing is that if I run Firefox 5 Mode without failure, it displays it correctly. I have disabled all addons, I cleaned all Cache, configuration of the size of minimum font... even reinstalled. It is allowed only in Mode safe looking.

  What else to do?

  Safe mode disables extensions in Firefox 4, and disables hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  Try to turn some of the prefs Boolean gfx.font_rendering on the topic: configuration page to disable some features.
  
  Filter: gfx

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.
  
  You can use the filter at the top bar of the on: page config to more easily spot a pref.

• I can't connect to my mac because the SHIFT key is down. Then he showed the top letter and can not connect... The mac is also overheating. I went to the apple store and they said that they cannot fix and need to send to the factory. Connection of same slo

  I just used my mac. I bought it on January 2014.

  A few months ago I couldn't connect to my mac more. There is nothing special on my mac to record.

  He was showing the wrong password when I tried to connect to my mac. It is overheating sometimes without help.

  So, I brought it to the apple store and they said that the shift key is down and therefore superior letter is all the time. and they could not help me open on the inside. Apple store guys suggested me to display somewhere or send it to the factory.

  My question is

  (1) what should I do

  (2) if I send to the factory or should go to the repair shop.

  you guys have an idea what the problem with my mac?

  I suggest you send to the factory, or if you have an apple authorized dealer / repair shop to fix the SHIFT key first, then a glance as to why the fan is still running hot.

  Maybe something has damaged the keyboard (shift key) area and also the fan internal.

  You can't have something special on the computer, but I'd always spend extra money to repair.

  The sooner, the better.

  If you need take photos or documents off the power the computer have you tried to connect an external keyboard to type your password?

• Satellite U500 - 1 DR - 2 and 3 of the SHIFT key Shift key

  Is there a possible solution to this problem when you press the BUTTON SHIFT 2, which is the (@) symbol display in the display with the symbol ("") and also, the KEY SHIFT 3 symbolize (hash) the display with the symbol (£).

  There was error in manufacturing or put in place error.

  Have you tried the English value (United States) in the language and keyboard settings?

• Web development Toolbox prevents me from using the letter upercase, special characters and all that requires the use of the SHIFT key. Help.

  whenever I press the SHIFT key, the web development Toolbox opens. I am unable to use the letter upercase, special characters and everything that requires the SHIFT key. It's really annoying me... i can't even use an exclamation mark111111

  The sounds you have a sticky key which is in the pressed state.

  Do you mean the box tools that should open via Ctrl + Shift + K or open more to the Toolbox that is displayed via Ctrl + F2?

  Try to press the keys involved several times, see the Web Developer menu for the shortcut keys.

  Have you tried to close and restart Firefox or restart the computer?

• Satellite Pro M40: computer stops when you press the SHIFT key

  Sometimes when I press the shift key it wonder if I want to shut down the computer. It also changes the internet Explorer mode in full screen. When it arrives it will be continually for centuries and then suddenly stop. Then start again. It seems not to happen at any given time. I disabled the hot key in the Toshiba utility and which comes to the top of the Tower stops when I pressed the SHIFT key, it does not give me the option.
  It's really annoys me because I can't just think what to do.

  Thank you

  Hello

  It's very strange. It is the first time I heard about this issue.
  As much as I know the Toshiba utility cannot add additional functions to shift and make this key as a stop button.
  I have gift? don't know if you have installed the 3rd party applications that can change the keyboard feature, but you should check this possibility.

  In addition can also be a defective hardware. Maybe something wrong with the keyboard controller. But of course the diagnostic test is necessary.

• Satellite C660/C660D - shift key causes the screen to go black

  After purchasing the Satellite C660/c660D less than a month ago.
  I am disappointed to see the SHIFT key (left), as well as the CTRL pressed, causing the screen to go black intermittently when you type my blog...

  Course not blogger like tested also in word.
  All the ideas that is weak given the reviews and prices...
  Help... dosnt do it every time, but most of the time. Not happy!

  It is a fault, I don't expect this brand

  Thanks for any help

  Hello

  > I am disappointed to see the SHIFT key (left) and the CTRL pressed, causing the screen to go black intermittently when you type my blog...

  What does this mean exactly? Press SHIFT and CTRL button turn off the display, and you are not able to see anything on the monitor?
  Is this good?

  Have you checked if this happens with the help of an external USB keyboard too?
  If this isn't the case, I guess that your keyboard is malfunctioning and needs to be replaced.

  One of my friends had a problem with my keyboard. The cursor jumped around and some characters are displayed two times this could be resolved by the BIOS update I m do not know if your laptop uses the latest version of the BIOS, but you can check this too.