Diagnostic says teredo tunneling pseudp report - interface. . Failed to start

Similar Questions

• Device cannot start. ISATAP and Microsoft Teredo Tunneling adapter card code 10.

  original title: hardware device

  Hi I have a problem with my pc in Device Manager, it is said.

  Map Microsoft ISATAP. This device cannot start. (Code 10)

  Map Microsoft ISATAP #2. This device cannot start. (Code 10)

  Microsoft Teredo Tunneling adapter. This device cannot start. (Code 10)

  I tried update driver software and when I do this it says that windows has determined the driver software for your device is up to date. So can someone give me some advice please.

  THANKS IN ADVANCE

  Hi macandy2010,

  Run the Fixit in KB 943104. This should solve the problems of Code 10.

• Microsoft Teredo Tunneling adapter - error code 10

  Former title: Microsoft Teredo Tunneling adapter

  I got an error code 10 regarding the Microsoft Teredo Tunneling card which read, "device cannot start".  I read in one of the forums that uninstall you and then restart your computer, Windows would automatically reinstall it correctly.  I did, but in Device Manager registration with network cards, it is more listed.  I wonder if it is still completely removed from my computer I really must installed there?  Everything seems to work fine with my computer.  I have Windows 7 Home Premium.

  Hello Arthur,.

  Thanks for posting your question on the forum of the Microsoft community.

  "Teredo" is a tunneling protocol designed to grant IPv6 connectivity to nodes that are located behind IPv6 NAT (network address translation) not compatible devices. It defines a way of encapsulating IPv6 packets in IPv4 UDP (User Datagram Protocol) datagrams can be routed through NAT devices, on the IPv4 internet.

  I suggest you try using the steps described in Microsoft Knowledge base article.
  Reference:
  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
  http://support.Microsoft.com/kb/943104

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  See also:
  http://TechNet.Microsoft.com/en-us/network/cc917486.aspx

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• I have no sound it says windows Teredo Tunneling pseudo-interface must be re installed

  It isThere there's a problem with the driver for Teredo Tunneling pseudo-interface. The driver must be reinstalled.

  Hello

  I suggest you go to Device Manager and see if there is an exclamation in addition teredo tunneling. If Yes, then follow the steps in this link to update the drivers:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Teredo-tunneling-pseudo-interface-shows-a-yellow/e3d0f39a-EA05-492d-9E57-49508c5cc538

  If not, try running this fixit and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  It will be useful.

• How can I fix adapter Teredo Tunneling Pseudo-Interface of network problem that shows an indication of a problem in the Device Manager?

  I've never seen this problem before.  The yellow triangle with the exclamation point is visible on this network adapter called Teredo Tunneling pseudo-interface.  The driver update does not work, and apparently the last and the best driver is already installed for this device.  I tried to disable and searching for the hardware changes.  Whenever the device is displayed again with an indication of problems triangle and even yellow exclamation point.  It is said that the device cannot start.  I rebooted the machine to see if something has changed.  There can be no.
  I just uninstalled the device and scanned for hardware changes, but it has not been detected and remains missing under the network adapter category.  I ran diagnostic system provided by HP software, but nothing seems to be defective.

  Hello

   
   
  1. What is the code that you see under the status of the device and the exact error message?
  2 have you made changes on the computer before this problem?
  As you have already tried updating the drivers and still you face the same problem, you can try to uninstall the existing driver and manually download the stand-alone version of the driver and install it.
  Step 1: first of all, I would say you temporarily disable any security software and then try to install.
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Step 2: Now try to install the drivers
  a. open the Device Manager by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. identify the sound card, right-click on it and select Properties .
  c. go to the driver tab and click Uninstall to uninstall the driver associated with the device.
  Restart the computer and install the latest driver.
  Reference: Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
  Get help with Device Manager errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors
  Overview of Teredo

  http://TechNet.Microsoft.com/en-us/network/cc917486.aspx

   

   

• Space and some letters does not also teredo tunneling interface and pseduo miniport adapter.

  My.title.Summed.it.up.space.and.certain.Letters.won't.Work.also.Teredo.tunneling.pseduo.interface.and.miniport.adapter.

  Please.Help

  The keyboard screen (Start - All Programs - Accessories - accessibility - on screen keyboard, type osk in Start - Runor Windows key + U) allows you to type with only a mouse. The keys work here?

  You can try the section diagnostic keys shortcut and modifier Key Release to https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA! 121 & authkey =! AAFg7j814-lJtmI.

  Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.

  Clean boot

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.

   

  Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.

  
  Tip clean boot

  If the above does not help.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box just to the left.

  Reset. If this resolves your wake problem half of the items until you find the one that.

  Safe mode

  If the above does not help.

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Go to the Startup tab, and then click Start. Reset. Come back here and uncheck the box secure start to return to normal mode.

• What is a Teredo Tunneling Interface Pseudso has a disk problem and can I fix it?

  My Windows 7 was freezing after I let it idle for a while. I have to do a hard reboot. Recently, I noticed that I had Dell support help agent and Dell update on my computer but I did not the it. They have been installed at the time my warranty missed. A forum said they had the same problem and the problem stopped after uninstalling them. It did for me too, for about two days but I'm back to freezing.

  Another forum says run diagnostics from the manufacturer. I did and I received two error messages. One was 0F00133C and the other was 0F001332 MAG DRIVE - request BIOCIC interrupt (IRO) has not indicated in time. At this point, the computer froze and wouldn't it be fun to just try again. Once again a forum said it was a sign of a dead hard drive.

  Just now under system and security of the Control Panel, I had Pseudso - Interface Teredo Runneling has a disk problem and hardware problem cannot have been detected.

  This computer can be solved without costing a fortune. They said I should also have other problems with a hard to die, but I did not. Would appreciate any help.

  Hello

  Thank you for giving us the opportunity to help you.

  I suggest you try the step provided by Nithyananda J replied on March 27, 2010 in the thread mentioned below. The steps helped a lot of people facing the issue with Teredo Tunneling Pseudso-Interface. Hope this will help you too.

  Teredo Tunneling Pseudo-Interface this device cannot start. (Code 10)

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• [SOLVED] Error 404 Google + card Tunnel Teredo Tunneling Pseudo-Interface disabled in NetBIOS over TCP/IP

  I realize that it is a long title.  It could be useful describe my problem.

  Recently, I downloaded something (not sure if I can't talk about website) and with download received 4 bad files found by Malwarebytes named: PUP. OfferBundle and PUP. ToolbarDownload.  These 4 files were quarantined and then removed, but this does not solve my problem.  I ran Microsoft and other spyware, but nothing more has been discovered.

  I have Norton Internet Security, which extends constantly and I always have these terrible files.

  I can not access Google search engine.  I get this message: error 404 (not FOUND)! 1

  The address bar reads: cgi-bin/redirect.ha.  I have another computer and am able to access Google since the router same use so I know there are still a few malware rootkit on my computer which may be connected to the Teredo Tunneling adapter, I don't understand.

  I'm not sure how to solve this problem.  I don't know where watch, but ran many scans of data collection.  Here is a part of a single test showing wireless and LAN configurations:

  Windows IP configuration

  Name of the host...: StrikingEagle-HP

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: att.net

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Virtual WiFi Miniport adapt

  Physical address.... : 20-10-7A-1C-AF-7D

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : att.net

  Description...: Realtek RTL8188CE 802.11b/g/n WiFi adapt

  Physical address.... : 20-10-7A-1C-AF-7D

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IPv6 address: 2602:306:cdb8:5300:b5fc:b411:6df0:e722 (Preferred)

  Temporary IPv6 address...: 2602:306:cdb8:5300:b9d4:2772:d89a:3a5f (Preferred)

  Address IPv6 local link...: fe80::b5fc:b411:6df0:e722% 13 (Preferred)

  IPv4 address...: 192.168.1.73 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Sunday, April 22, 2012 23:29:35

  End of the lease...: Monday, April 23, 2012 23:29:34

  ... Default gateway. : fe80::42b7:f3ff:fec9:a2e0% 13

  192.168.1.254

  DHCP server...: 192.168.1.254

  DHCPv6 IOOKING...: 320868474

  DHCPv6 DUID customer...: 00-01-00-01-16-A6-EF-8E-2C-41-38-5C-76-B6

  DNS servers...: 192.168.1.254

  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : att.net

  Description...: Realtek PCIe GBE Family Controller

  Physical address.... : 2C-41-38-5C-76-B6

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IPv6 address: 2602:306:cdb8:5300:584d:2ddf:6 a 08: f6a7 (Preferred)

  Temporary IPv6 address...: 2602:306:cdb8:5300:575:56e9:298d:9097 (Preferred)

  Address IPv6 local link...: fe80::584d:2ddf:6 a 08: f6a7% 11 (Preferred)

  IPv4 address: 192.168.1.71 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Sunday, April 22, 2012 23:29:32

  End of the lease...: Monday, April 23, 2012 23:29:32

  ... Default gateway. : fe80::42b7:f3ff:fec9:a2e0% 11

  192.168.1.254

  DHCP server...: 192.168.1.254

  DHCPv6 IOOKING...: 237781304

  DHCPv6 DUID customer...: 00-01-00-01-16-A6-EF-8E-2C-41-38-5C-76-B6

  DNS servers...: 192.168.1.254

  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {38655146-6231-4777-AB1C-2DC12E0017FD}:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft ISATAP adapter

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 9:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft 6to4 card

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Tunnel adapter ISATAP.att.NET:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. : att.net

  ... Description: Adapter Microsoft ISATAP #2

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  IPv6 address: 2001:0:4137:9e76:2413:2ee1:3f57:feb8 (Preferred)

  Address IPv6 local link...: fe80::2413:2ee1:3f57:feb8% 14 (Preferred)

  ... Default gateway. :

  NetBIOS over TCP/IP...: disabled

  Server: dsldevice.att.net

  Address: 192.168.1.254

  Name: google.com

  Address: 74.125.227.40

  74.125.227.41

  74.125.227.46

  74.125.227.32

  74.125.227.33

  74.125.227.34

  74.125.227.35

  74.125.227.36

  74.125.227.37

  74.125.227.38

  74.125.227.39

  Please note the last entry.  DHCP is not enabled.  NetBIOS over TCP/IP is disabled.  Now, it's for the Tunnel Teredo Tunneling Pseudo-Interface AND Google map is registered immediately thereafter with a list of IP addresses.

  Would be - why I can't access Google?  How can I fix it?  How can I activate this card Tunnel?  I want to do this?  I did a ping for the Tunnel of the card test and it seemed to work OK.  How do I know if card Tunnel is really on?   Why is the Tcpip BIOS

  people with disabilities in the last list of IP and not on others?  Why are all those Google IP addresses listed?

  Any help is greatly appreciated.  I'm very stuck.  Thank you.

  Edit = Edit

  has run another scan: MicrosoftSecurity Agent (I think) that produced a VERY long report, CBS.  There are a lot of mistakes in this report, and I don't know which ones were repaired my Microsoft or if errors are related to my problem.  Here are some of the errors.  All t errors are repeated throughout the report. I hope this info is helpful:

  2012-04-11 07:29:06, CBS Session info: 30218206_2951615106 initialized by the WindowsUpdateAgent client.

  2012-04-11 07:29:06, missing version of the CBS identity information. [HRESULT = 0 X 80070057 - E_INVALIDARG]

  2012-04-11 07:29:06, error CBS has no identity shred: Microsoft-Windows-Internet Explorer-LanguagePack [HRESULT =

  0 X 80070057 - E_INVALIDARG]

  2012-04-11 07:29:06, CBS Session info: 30218206_2951615106 initialized by the WindowsUpdateAgent client.

  2012-04-11 07:29:06, missing version of the CBS identity information. [HRESULT = 0 X 80070057 - E_INVALIDARG]

  2012-04-11 07:29:06, error CBS has no identity shred: Microsoft-Windows-Internet Explorer-LanguagePack [HRESULT =

  0 X 80070057 - E_INVALIDARG]

  2012-04-11 07:29:07, CBS Session info: 30218206_2956451109 initialized by the WindowsUpdateAgent client.

  2012-04-11 07:29:07, info CBS doesn't have the package opened internally. [HRESULT = 0X800F0805 - CBS_E_INVALID_PACKAGE]

  2012-04-11 11:20:30, CBS M² info: could not start the download with pattern file: C:\Windows\servicing\sqm\*_std.sqm, flags: 0 x 2 [HRESULT = 0 x E_FAIL 80004005]

  Hello
   
   
  We are pleased to know that the problem is solved.
  We know in the future if you have problems with Microsoft Windows.

• Teredo tunneling pseudo interface of windows 8 pro driver works do not error code (code 10).

  Please answer as soon as possible... That's what it shows... code (10)... I tried to update the driver... It shows that it is the best driver available and installed in my camera...

  OT: teredo tunneling pseudo interface driver Windows 8 pro does not not work... Please help (code 10)... I tried to update shows it is updated and the best driver is installed on my laptop

  Hi Shilratna,

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  I suggest you try the steps from the following link:

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
  http://support.Microsoft.com/kb/943104/en-us

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Teredo tunneling interface properties psrudo

  My computer says that Teredo Tunneling pseudo interface properties is not running.  How can I do and is it really necessary?

  CP

  It is only necessary if you have a printer that uses the Protocol.  This is an IPv4 > IPv6 tunnel and most systems can do without him.

• Could not load the driver for Teredo Tunneling Pseudo-Interface

  Hello

  Does anyone know how to fix this problem (Vista) Business

  Product
  Teredo Tunneling Pseudo-Interface

  Problem
  Could not load driver software

  Description
  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 10.

  Signature of the problem
  Problem event name: PnPDeviceProblemCode
  Architecture: x 86
  Hardware ID: * TUNMP
  Configure the class GUID: {4d36e972-e325-11ce-bfc1-08002be10318}
  The PnP problem code: 0000000-a
  Driver name: tunmp.sys
  Driver version: 6.0.6000.16386
  Driver date: 02/11/2006
  OS version: 6.0.6000.2.0.0.256.6
  Locale ID: 2057

  Additional information about the problem
  Bucket ID: 12121968

  Concerning
  Dave

  Hi Dave

  Can you please give us more information on your laptop and what is happening exactly?

• TEREDO TUNNELING PSEUDO-INTERFACE DEVICE DOES NOT WORK CORRECTLY - ACCORDING TO AVG PC TUNE UP

  My laptop is a HP G7030EA - MS Windows Vista Home Basic 32-bit SP2 Intel Pentium Dual CPU T2330 @ 1.60 GHz, 1.0 GB RAM, Mobile Intel 965 Express Chipset Family, bought new in February 2008.  I have not changed any hardware, software, etc.  I do not use it for games, only for things such as e-mails and visit websites

  Until last month when my desktop computer broke, I used the laptop only occasionally as a backup of the computer.  It never quite worked and seems to be unable to handle several tasks at once, often taking minutes for Google to load.  When I get impatient and click the mouse too much I heard a horrible noise and the screen mouse cursor freeze for a minute or two.

  As the laptop has become my main computer at the moment, I downloaded AVG PC Tune Up to see if it would improve it performance has not helped.  I was surprised to see how much memory the AVG2013 anti virus program uses, but wonder if the speed of connection and freezing problems I experience result (AVG Tune Up conclusions on) the Teredo Tunneling pseudo-interface unit does not properly.

  I follow AVG on screen re boards: looking for a software driver update but none was found, and I got the message "the best driver for your device software is already installed.  Windows has determined that the driver software for your device is up-to-date, Tun Miniport, Microsoft Map.

  This left me confused.  If there is a problem with this device, no solution seems to exist.

  Any help that will allow my laptop to function normally is welcome.

  I understand that you want to know if the teredo adapter can cause performance problems.

  The teredo adapter should not cause performance problems.  It is really just used to allow devices work IPv4 with IPv6 Internet service provider.  If the ISP was using IPv6 and your system did not have the adapter teredo, so it wouldn't work properly with the service provider.  For now, IPv6 is a significant minority that the world continues to work on IPv4 as not all networks, Internet service providers, and businesses are not entirely passed to IPv6.

  This thread on the Microsoft forums goes into a little more detail about the adapter teredo including how to disable it so that you only see it in Device Manager.  Unless you are using IPv6, this shouldn't really be a problem.

  If you start in safe mode, the performance problem persists?  Turn on the computer and press F8 once per second for the Mode option, safe mode with networking.  This will help you to further isolate the performance problem.

  Furthermore, does this happen that the adapter is connected or not?

• Problem with the HP 430 (bluetooth and teredo tunneling Pseudo-Interface) drivers

  Hello

  recently my bluetooth function cannot to connect to other devices... This is what happens to the Device Manager:

  

  What is teredo tunneling pseudo-interface is for? is it important?
  If so, how to solve this problem?
  How to solve the problem of the bluetooth?

  Generic Bluetooth adapter:
  USB\VID_03F0 & PID_311D & REV_0001
  USB\VID_03F0 & PID_311D

  Teredo tunneling pseudo-Interface:

  * TEREDO

  Go to Device Manager, right click on the device and select Update driver. Path to the .inf file that you downloaded for use.

• Teredo tunneling Pseudo-Interface desintaler

  Teredo tunneling Pseudo-Interface uninstall how to reinstall

  Hello

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

• Teredo Tunneling Pseudo-Interface - This device cannot start. (Code 10)

  Original title: code10microsoft toledo tunnelling

  We think we've found a driver but we are not sure because he vomits again code.10

  Hello

  1. don't you make changes to your computer before this problem started?

  2. What is the brand and model number?

  If the device has a FailReasonString value in its hardware key, that string is displayed in the error message. The driver or enumerator places this registry string value there. If there is no FailReasonString in the hardware key, you receive the following error message: this device cannot start. (Code 10)

  You can try the following steps and check if that helps you solve the problem.

  Method 1:

  Open the Device Manager and the analysis of new hardware and select 'Show hidden devices' in the view menu and check if you find errors.

  a. Open command prompt with administrator credentials (type CMD and right - click Run as administrator).

  b. Type "netsh" and ENTER.

  c. Type "int teredo" and ENTER

  d. type 'set disabled state' and ENTER.

  e. open the Device Manager and uninstall "Teredo Tunneling pseudo-interface".

  f. Open command with administrator credentials prompt once more.

  g. type netsh + ENTER.

  h. Type "int ipv6" + ENTRY

  i. type 'set teredo client' + ENTRY

  j open the Device Manager and the analysis of new hardware.

  k. Select 'Show hidden devices' in the view menu. You will see now that she is present without errors.

  Method 2:

  If the steps above do not help, you can try to uninstall the drivers of the computer network and reinstall and check if that helps. Before uninstalling the network drivers, make sure that you download the latest drivers on the site of computer manufacturers. Follow the steps below to uninstall the network adapter.

  Follow the steps below to uninstall and reinstall the network card.

  a. click on start

  b. in the type of search box of start of "devmgmt.msc" and press enter

  (c) in Device Manager, expand network adapters

  d. right-click on the network adapter and uninstall.

  e. restart the computer, and then reinstall the network card.

  Note: When uninstalling device drivers make sure you put a check mark against 'delete the driver for this device '.

  I hope this helps.