I see many people posting this info... anyone is able to decipher?
Start time: 21:18 28/07/16
Model identifier: MacBook9, 1
The system version: OS X 10.11.6 (15G 31)
Kernel version: Darwin 15.6.0
Integrity of system protection: enabled
Since the start-up time: 2 minutes
Journal
28 juil 20:39: 50 can't load kext com.apple.driver.AppleUpstreamUserClient (error 0xdc008012).
28 juil 20:39: 50 Kext failed loading com.apple.driver.AppleOSXWatchdog (0xdc008012).
28 juil 20:39: 50 can't load kext com.apple.driver.AppleOSXWatchdog (error 0xdc008012).
28 juil 20:39: 51 * [BroadcomBluetoothHostController] [SetupController] - disableHIDEmulation () failed - result = 0xE00002BC (kIOReturnError) - retry time 0 - 0xd300 *.
28 juil 20:39: 51 Kext failed loading com.apple.driver.ApplePlatformEnabler (0xdc008012).
28 juil 20:39: 51 can't load kext com.apple.driver.ApplePlatformEnabler (error 0xdc008012).
28 Jul 21:15:39 launchd process [1]-l' system of limitation of disabling i/o level
28 Jul 21:15:39 launchd process [1] disable the CPU - the system-wide limit
28 Jul 21:15:55 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785
28 Jul 21:15:55 AppleIntelLpssI2C - 1:initACPIProvider: failed to get the path to acpi for provider
28 Jul 21:15:55 AppleIntelLpssI2C - 1:start: initACPIProvider failed
28 Jul 21:15:55 error: EFI AppleHSSPIController::start left active SPI
28 Jul 21:15:55 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0xf3caa6e67a11df47, the provider is 0xf3caa6e5babab747
28 Jul 21:15:55 init: error getting of PHY_MODE; using MODE_UNKNOWN
28 Jul 21:15:57 disk0s1: alignment error.
28 Jul 21:15:57 disk0s1: alignment error.
28 Jul 21:15:57 disk1: alignment error.
28 Jul 21:15:57 disk1: alignment error.
28 Jul 21:15:57 disk0s3: alignment error.
28 Jul 21:15:57 disk0s3: alignment error.
28 Jul 21:15:57 AppleIntelLpssI2C - 1:initACPIProvider: failed to get the path to acpi for provider
28 Jul 21:15:57 AppleIntelLpssI2C - 1:start: initACPIProvider failed
28 Jul 21:15:57 [IGPU] will fallback alongside host planning if graphics firmware does not load
28 Jul 21:15:58 * [BroadcomBluetoothHostController] [SetupController] - disableHIDEmulation () failed - result = 0xE00002BC (kIOReturnError) - retry time 0-0 x 6500 *.
28 Jul 21:16 his assertion in AppleHDAController at line 8718
Content of/etc/hosts
127.0.0.1 localhost
255.255.255.255 broadcasthost
: 1 localhost
Content of /etc/pf.conf
scrub-anchor "com.apple / * '.
NAT-anchor "com.apple / * '.
RDR-anchor "com.apple / * '.
dummynet-anchor "com.apple / * '.
Anchor "com.apple / * '.
load the "com.apple" anchor of "/ etc/pf.anchors/com.apple".
Content of/etc/syslog.conf
install.* @127.0.0.1:32376
Content of /etc/pam.d/authorization
Pam_krb5.so AUTH optional use_kcminit use_first_pass
AUTH pam_ntlm.so optional use_first_pass
AUTH required pam_opendirectory.so use_first_pass nullok
account required pam_opendirectory.so
Content of /etc/pam.d/checkpw
AUTH required pam_opendirectory.so use_first_pass nullok
account required pam_opendirectory.so no_check_home no_check_shell
Content of /etc/pam.d/chkpasswd
AUTH required pam_opendirectory.so
account required pam_opendirectory.so
password required pam_permit.so
session required pam_permit.so
Content of /etc/pam.d/cups
AUTH required pam_opendirectory.so
account required pam_permit.so
password required pam_deny.so
session required pam_permit.so
Content of /etc/pam.d/ftpd
AUTH required pam_opendirectory.so
account required pam_permit.so
password required pam_deny.so
session required pam_permit.so
Contents of /etc/pam.d/login
Pam_krb5.so AUTH optional use_kcminit
AUTH pam_ntlm.so optional try_first_pass
AUTH pam_mount.so optional try_first_pass
AUTH required pam_opendirectory.so try_first_pass
account required pam_nologin.so
account required pam_opendirectory.so
pam_opendirectory.so password required
session required pam_launchd.so
session required pam_uwtmp.so
session pam_mount.so in option
Content of /etc/pam.d/login.term
account required pam_nologin.so
account required pam_opendirectory.so
session required pam_uwtmp.so
Content of /etc/pam.d/other
AUTH required pam_deny.so
pam_deny.so account required
password required pam_deny.so
session required pam_deny.so
Content of /etc/pam.d/passwd
AUTH required pam_permit.so
account required pam_opendirectory.so
pam_opendirectory.so password required
session required pam_permit.so
Content of /etc/pam.d/rshd
AUTH required pam_permit.so
account required pam_nologin.so
account required pam_opendirectory.so
session required pam_launchd.so
Content of /etc/pam.d/screensaver
Pam_krb5.so AUTH optional use_kcminit use_first_pass
AUTH required pam_opendirectory.so use_first_pass nullok
account required pam_opendirectory.so
account sufficient pam_self.so
Group accounts required pam_group.so no_warn = admin, wheel fail_safe
account required pam_group.so no_warn deny group = admin, wheel ruser fail_safe
Content of /etc/pam.d/smbd
account of the sacl_service pam_sacl.so = allow_trustacct smb
session required pam_permit.so
Content of /etc/pam.d/sshd
Pam_krb5.so AUTH optional use_kcminit
AUTH pam_ntlm.so optional try_first_pass
AUTH pam_mount.so optional try_first_pass
AUTH required pam_opendirectory.so try_first_pass
account required pam_nologin.so
account of the sacl_service pam_sacl.so = ssh
account required pam_opendirectory.so
pam_opendirectory.so password required
session required pam_launchd.so
session pam_mount.so in option
Content of /etc/pam.d/su
AUTH sufficient pam_rootok.so
AUTH required pam_opendirectory.so
Group accounts required pam_group.so no_warn = admin, wheel tweak root_only fail_safe
no_check_shell account required pam_opendirectory.so
pam_opendirectory.so password required
session required pam_launchd.so
Content of /etc/pam.d/sudo
AUTH required pam_opendirectory.so
account required pam_permit.so
password required pam_deny.so
session required pam_permit.so
Content of /etc/periodic/daily/110.clean-tmps
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_clean_tmps_enable' in
[AA] [Ee] [Ss])
If [-z "$daily_clean_tmps_days"]
then
echo ' $daily_clean_tmps_enable is defined, but '.
"$daily_clean_tmps_days is not.
RC = 2
on the other
ECHO «»
echo "deleting old temporary files:
Set f noglob
args = ""-atime $daily_clean_tmps_days - mtime + $daily_clean_tmps_days ""
args = "${args} - ctime + $daily_clean_tmps_days.
dargs = "- empty - mtime + $daily_clean_tmps_days"
dargs = "${dargs}! "- name .vfs_rsrc_streams_."
[n "$daily_clean_tmps_ignore"] & & {}
args = "$args '" echo "${daily_clean_tmps_ignore %} ' |" ' "
sed / [] [] * / ! -name/g "
dargs = "$dargs '" echo "${daily_clean_tmps_ignore %} ' |" ' "
sed / [] [] * / ! -name/g "
.. .and 21 more line (s)
Content of /etc/periodic/daily/130.clean-msgs
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_clean_msgs_enable' in
[AA] [Ee] [Ss])
If [! d/var/msgs]
then
echo ' $daily_clean_msgs_enable has the value but msgs/var / ' \.
"does not exist".
RC = 2
on the other
ECHO «»
echo "cleaning of the old ads system:
[n '$daily_clean_msgs_days'] & &
ARG =-${daily_clean_msgs_days #-} | ARG =
GSM-c $arg & & rc = 0 | RC = 3
FI;
*) rc = 0;
ESAC
output $rc
Content of /etc/periodic/daily/140.clean-rwho
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_clean_rwho_enable' in
[AA] [Ee] [Ss])
If [-z "$daily_clean_rwho_days"]
then
echo ' $daily_clean_rwho_enable is activated but '.
"$daily_clean_rwho_days is not defined.
RC = 2
Elif [! d/var/rwho(1)]
then
echo "$daily_clean_rwho_enable is enabled but/var/rwho(1)."------
"does not exist".
RC = 2
on the other
ECHO «»
echo "deleting obsolete files in/var/rwho(1):
case '$daily_clean_rwho_verbose' in
[AA] [Ee] [Ss])
print = -.
*)
print =;
.. .and 14 more line (s)
Content of /etc/periodic/daily/199.clean-fax
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
If [/ var/spool/fax - d]; then
ECHO «»
echo "deleting files fax scratch."
CD/var/spool/fax & & \
To find. -type f-name ' [0-9] *. [0-9] [0-9] [0-9] "- mtime + 7 - delete > / dev/null 2 > & 1;"
FI
Content of /etc/periodic/daily/310.accounting
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_accounting_enable' in
[AA] [Ee] [Ss])
If [!] ACCT - f]
then
echo '$daily_accounting_enable has the value but ACCT '.
"does not exist".
RC = 2
Elif [-z "$daily_accounting_save"]
then
echo ' $daily_accounting_enable is defined, but '.
"$daily_accounting_save is not.
RC = 2
on the other
ECHO «»
echo "accounting log rotation and collection of statistics:
CD/var/account
RC = 0
n = $daily_accounting_save
RM f ACCT. $ ACCT n.gz. $n || RC = 3
m = $n
.. .and 18 several line (s)
Content of /etc/periodic/daily/400.status-disks
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_status_disks_enable' in
[AA] [Ee] [Ss])
ECHO «»
echo "record status:
DF $daily_status_disks_df_flags & & rc = 1 | RC = 3
;;
*) rc = 0;
ESAC
output $rc
Content of /etc/periodic/daily/420.status-network
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_status_network_enable' in
[AA] [Ee] [Ss])
ECHO «»
echo "State of the network interface:
case '$daily_status_network_usedns' in
[AA] [Ee] [Ss])
netstat-i & & rc = 0 | RC = 3;
*)
netstat - in & & rc = 0 | RC = 3;
ESAC;
*) rc = 0;
ESAC
output $rc
Content of /etc/periodic/daily/430.status-rwho
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_status_rwho_enable' in
[AA] [Ee] [Ss])
RWHO(1) = $(echo/var/rwho / *)
If [f ' ${rwho(1) % *} "]
then
ECHO «»
echo "the system of Local network status:
PROG = ruptime
on the other
ECHO «»
echo "Local System State:
PROG = running time
FI
RC = $($prog | tee/dev/stderr | wc-l)
If [$?-eq 0]
then
[$rc - gt 1] & & rc = 1
on the other
RC = 3
FI;
.. .and 3 more lines
Content of /etc/periodic/daily/999.local
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
RC = 0
script in $daily_local
do
echo "
case '$script' in
/*)
If [f "$script"]
then
echo "Running $script:
sh $script | RC = 3
on the other
echo "$script: no file.
[$rc - lt 2] & & CR = 2
FI;
*)
echo "$script: not an absolute path.
[$rc - lt 2] & & CR = 2;
ESAC
fact
output $rc
Content of /etc/periodic/monthly/199.rotate-fax
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
ECHO «»
printf %s "rotation of the fax log files:
CD/var/log/fax
I'm in * .log; do
If [f ' ${i} "]; then
echo-n "$i".
If [x - / usr/bin/gzip]; then gzext = ".gz". else gzext =""; FI
If [f ' ${i} $.3 {gzext} "]; then mv-f "${i} $.3 {gzext}" "${i}.4$ {gzext}"; FI
If [f ' ${i} $.2 {gzext} "]; then mv-f "${i} $.2 {gzext}" "${i} $.3 {gzext}"; FI
If [f ' ${i}.1$ {gzext} "]; then mv-f "${i}.1$ {gzext}" "${i} $.2 {gzext}"; FI
If [f ' ${i}.0$ {gzext} "]; then mv-f "${i}.0$ {gzext}" "${i}.1$ {gzext}"; FI
If [f ' ${i} "]; then mv-f "${i}" "${i}.0" & & if [x - / usr/bin/gzip]; then gzip-9 "${i}.0. DIY FI
Touch "${i}" & & chmod 640 ' ${i} "& & chown root: admin" ${i} ".
FI
fact
ECHO «»
Content of /etc/periodic/monthly/200.accounting
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
oldmask = $(umask)
umask 066
case '$monthly_accounting_enable' in
[AA] [Ee] [Ss])
W = / var/log/wtmp
RC = 0
Remove = NO
If [$rc - eq 0]
then
ECHO «»
echo "doing the accounting of connection:
RC = $(ac-p |) Sort - nr k 2 | Tee/dev/stderr. WC - l)
[$rc - gt 0] & & rc = 1
FI
[$remove = YES] & & rm-f $W.0;
*) rc = 0;
ESAC
umask $oldmask
output $rc
Content of /etc/periodic/monthly/999.local
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
RC = 0
script in $monthly_local
do
echo "
case '$script' in
/*)
If [f "$script"]
then
echo "Running $script:
sh $script | RC = 3
on the other
echo "$script: no file.
[$rc - lt 2] & & CR = 2
FI;
*)
echo "$script: not an absolute path.
[$rc - lt 2] & & CR = 2;
ESAC
fact
output $rc
Content of /etc/periodic/weekly/320.whatis
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$weekly_whatis_enable' in
[AA] [Ee] [Ss])
ECHO «»
echo "reconstruction whatis database:
MANPATH ='/ usr/bin/manpath - q'
If [$? = 0]
then
If [-z "${MANPATH}"]
then
echo "manpath impossible to find directories manpage.
RC = 3
on the other
RC = 0
/usr/libexec/makewhatis.local "${MANPATH}" | RC = 3
If [X "${man_locales}"! = X]
then
I'm in ${man_locales}
do
LC_ALL = $i /usr/libexec/makewhatis.local - a------.
-L "${MANPATH}" | RC = 3
.. .and 9 more line (s)
Content of /etc/periodic/weekly/999.local
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
RC = 0
script in $weekly_local
do
echo "
case '$script' in
/*)
If [f "$script"]
then
echo "Running $script:
sh $script | RC = 3
on the other
echo "$script: no file.
[$rc - lt 2] & & CR = 2
FI;
*)
echo "$script: not an absolute path.
[$rc - lt 2] & & CR = 2;
ESAC
fact
output $rc
Contents of the /Library/Preferences/com.apple.security.appsandbox.plist (text of XML document)
<? XML version = "1.0" encoding = "UTF-8"? >
<! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""
< plist version = "1.0" >
< dict >
< key > UnrestrictSpotlightContainerScope < / key >
< true / >
< / dict >
< / plist >
Contents of the /Library/Preferences/SystemConfiguration/com.apple.Boot.plist (text of XML document)
<? XML version = "1.0" encoding = "UTF-8"? >
<! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""
< plist version = "1.0" >
< dict >
Flags kernel < key > < / key >
< string > < / string >
< / dict >
< / plist >
Firewall: on
TCP/IP
Subnet mask: 255.255.255.240
Small files: 3
Time elapsed (s): 220
Please do not empty your log file without be requested, let us rather technical problem you are facing.
Tags: Mac OS & System Software
Similar Questions
-
This file seems to be the most mysterious file on the internet. No information what so ever about this. Could someone explain what it is, whether or not I should include in my backups? Any information would be appreciated!
Hello
Here are some temporary database files.
You will need to decide which files need to be stored according to your requirement
-
There are several different corrections suggested here. Some seem to work for some and not others. I tried all the on an IBM laptop runing xp. Nothing helps. It is almost useless to try to hit it and I don't even think to try to stick a link on the typed page. A new Sony (two week old) with Win 7 has the same problem. the roll back trick help does not work, there is nothing to restore. This problem seems to be on a lot of different brands of laptops and was captured in both XP, Vista and Win 7. This is why it seems to be a problem in Microsoft. Unchecking the boxes in Panel control/mouse seemed to help some. Not me. Reinstall the touch pad/mouse drivers may or may not help. It did not help me. It seems to me that someone at Microsoft would take notice and we say if there is a fix or not.
Please stick to one of your other previous discussions on your problem:
CF. http://social.answers.microsoft.com/Forums/en-US/vistaperformance/thread/b9d3ce34-bfee-42a1-9b0a-307dd3649f97/ (Feb 07-10)
CF. http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/520739b2-359e-41ce-8032-6413c39fb7d3/ (25 March-10)
Thank you.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
FSX MULTIPLAYER DOES NOT HAVE MANY PEOPLE WITH THE SAME PROBLEM
I have a FSX I've always used the multiplayer mode for online flight, now a few weeks ago its been not conect, my internet is good, everything works but is not multiplayer, many people with this problem, tell us how to find a solution, we really like this multiplayer game
Hello
Thanks for posting your query in Microsoft Communities.
According to the description of the problem, it seems that you are not able to play Flight Simulator X multiplayer.
Please go ahead and read the steps mentioned from the link and later a update on the State of the question.
Microsoft Games: Multiplayer troubleshoot
You can also stay in contact with the Flight Simulator with the help of the link and check if it helps.
http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx
I hope this helps. Let us know if you need more assistance.
-
Many people have a problem closing with El Capitan? Apple plan to fix this?
Many people have a problem closing with El Capitan? Apple plan to fix this?
You must describe your shutdown problem otherwise, we can only guess what you're talking about.
-
Help! I accidentally deleted my post-it notes. is it possible to recover with all this info? I didn't click on the close button.
Try to browse to the
Directory of Notes C:\Users\ \AppData\Roaming\Microsoft\Sticky, right-click on StickyNotes.snt and select restore previous Versions. The file is taken from your last restore point, if you have a. Click on the button restore below and confirm. -
Preloader freezes randomly - problem reported by many users in this forum.
I made an animation on the society 20141 CC edge I work, I was always testing locally and everything was fine. When I finished the animation and decided to load on the server, I realized after testing with different browsers (IE, Chrome, Safari, Firefox, etc), the animation freezes in preloader randomly. When I click on "Refresh" the animation loads normally, most of the time. : /
Here is the link if they can verify for themselves: http://www.Mambembe.com/infos/Ebola/index.html
As you can see, seems to have a problem that prevents the preloader to get only the files already loading, and it should start the animation.
I thought I could do something wrong at the time of publication, so I decided to try all possible combinations in the export, but I got the same result.
After trying to solve on my own, I decided to ask for help in the forums. I was surprised and confused to realize many members, including this forum to report the same problem, without obtaining any official or definitive answer on the case.
I come here, try to get a help for me and those who encounter the same problem. In the meantime, I'll look for other similar programs try to replace the Board. It's unfortunate because I chose to use the edge to trust Adobe programs and work with them for years. I hope not to disappoint and me to continue my work with the Edge which is a great tool, except when you need to publish.
Sorry for my English. I hope that was clear, and I count on the support of others with the same problem. We all need to report to what is happening, while the adobe team can help us. I invite you to post your errors here like this post.
Thank you.
You can place it at the bottom of the HTML of your right of composition before the tag like this:
AdobeEdge.bootstrapCallback(function(compId) {
comp = AdobeEdge.getComposition(compId).getStage();
AdobeEdge.Symbol.bindElementAction(compId, 'stage', 'document', 'compositionReady', function(sym, e) {
comp.play();
});
});
-
Another post "this set of operation will be OK for CS5.5?
This again is another question "is the computer I want to be good enough for CS5.5." Before I ask you to please forgive my ignorance and the length of this post. I am new to having to worry about hardware. In the past any decent PC meets my needs, but I find that this is the case I now need to edit video.
So I'll start with my special needs. I need portability. I am a student and directing a summer camp. In my role at the camp, I identified the need to improve our hardware promotional camp, and that's where video editing comes into play. I will be filming and editing of several short promotional films and a couple of short documentary style using DSLR footage and perhaps a small camcorder or two. After much research and play with some free trial software, I have it set on CS5.5, but there is that one problem, my computer is not up to the task. Conveniently enough, my current computer has seen better days, and it's time to spend anyway, so I was searching and shopping around trying to find a suitable computer. That portability is a must and I can't afford a decent desktop and a laptop (and even if I could it would be boring data transfer back), I've been looking at laptops. It seems that any mobile off - the shelf that is well suited to run adobe isn't really all that portable. Of course, you can carry it much easier that a computer desk, but you can't expect to get a full day in the life of the battery out of it, are not a reasonable weight to carry around the creation (my point is that a computer 17 "laptop is out). I did some digging, and after reading a lot of posts on this forum and a lot of information from other sources, I think I came up with a solution. I am looking for admission in any people of enthusiasts see potential problems with my idea, and for dell sales representatives are not tech savvy, so I thought it was a good place to discover how well adobe would go on my set - up proposed (I'm not a pro and won't be of feature films (, edition, so I don't think that I need the same performance that your desktop wearing I have just need to perform well with as few hold ups as possible).
Here's what I came with:
Dell XPS 14z:
- Intel core i-7 2640 M (2.8 GHz, with "turbo boost" up to 3.50 GHz)
- 8 GB Dual Channel DDR3 SDRAM
- 750 GB SATA, HDD 7200 RPM
- NVIDIA Geforce 520 M 1 GB graphics card
- The only information about the screen resolution I could find on the site web of Dell were "true 720 p HD display" after reading a few reviews, I found the specs are lower that the minimum recommended by Adobe, I forget exactly what they are.
If this computer is no longer that I never needed for my needs no video editing. On paper, it's a nice small laptop, a little expensive ($1300!), but they can be had at a very reasonable price ($700 - $800) refurbished Dell online workshop. None-the-less, I see several problems with this configuration.
First is the screen: it is not enough. Which is easily solved using an external monitor, and you can get a pretty decent screen off tiger direct for less than $200. I can tolerate a video editing at a desk, I need portability to other applications.
Second is the hard drive. Reading this forum, I understand that editing with a single hard disk can slow things down a bit. I was wondering how big a deal it really is for the occasional Editor? There are adapters that allow you to place a second hard drive, where the optical drive is in this laptop. If necessary, I intend to put a second 750 GB 7200 rpm HARD drive where is the optical drive. Problem solved, right? Did anyone see any problem with this idea? My next question on the subject of the hard drive is: how would a third hard drive really benefit me? And data transfer using a with a USB 3.0 external HARD drive connection be fast enough to be a viable option for a third drive? Anyway I could take an appropriate hard drive and caddy for a little less than $175 and $100 for a USB 3.0 external HARD drive to be used as a third drive if necessary.
The third potential problem is the RAM. It seems there are a lot of opinions out there about how much is enough. 8 GB is enough? According to the website of intel, this particular processor is compatible with up to 16 GB of RAM, and after searching the forums I found a few cases of people expand their RAM on this computer to 16 GB with no problems. I understand that I can replace the 2 x 4 GB current implemented with 1x4Go + 1X8GB or 2x8GB to give a total of 12 or 16 GB of RAM. Is it necessary or even beneficial? 8 GB would be more than enough for anything else I do, and since I have some experience with video editing I thought I would ask those who know. Need an upgrade of RAM? By using this configuration, I could update the RAM 12 GB for about $100 and 16 GB for about $200.
Finally, the graphics card that is provided with this computer is not on the list of cards recommended by Adobe. I understand that this is because it only supports CUDA, how much of an issue is it? I'll be able to edit video without recommended card effectively?
The point of all numbers is as follows: 800 + 200 + 175 + 100 = 1, 275. $ 1275ish seems to me that I could get a very reasonable video editing set up which is always portable. It is less than the price of the tile on these laptops and much less than a Mac book pro, which is the world's first recommendation when I mention that I want to use the computer for video editing. This looks like a very reasonable price for a laptop with a processor intel 2.8 GHz i7, two 750 GB 7200 rpm HDD, 12 GB of RAM, and an external monitor when I want to sit and change. Am I delusional thinking it would go well with CS5.5?
So I guess the point is the following. Life is any compromise, since I need portability and I am not a professional (just an anal consumer with high standards :), I am willing to trade a little performance for improved portability of video editing. I want the opinion of those who have experience using CS5.5 with different layouts, my proposed set-up seems like a reasonable compromise? Improvements are still needed? They would be sufficient to provide a reasonable editing experience? All the other tips (not to mention than buying a desktop computer or a computer wicked expensive 17 "laptop which weighs two to three times more expensive and chews through the battery life)?
Thank you for sticking with it and give me any comments. We appreciate it!
Benson,
Trying to stick with your original objectives and I think I can see where you're going, I have some tips and suggestions...
-Since the SLR CAMERAS and camcorders (I guess as ACHDV) are very difficult codecs; I suggest that you consider only Intel QM 32nm processors (i.e. i7 2670QM w / 4 carrots + hyperthreading); Having twice the nuclei is HUGE for CS5/5.5
-Suggest that go with a 14 "display 1600 x 900 for a good compromise between size, weight and cost
-A video installation of nVidia level "gamers" will allow the massively useful EMT be put on (carrots GPU cuda)
-8 GB of RAM will work; of course the 16 GB would allow for faster burns to DVD, but I don't feel that to be a need
-Supports for the conversion of optical Bay NewModeUS are asesome to add a 2.5 "2nd if you need to change on the fly, but since you said you don't need this capability I suggest you get the external drive USB3.0 to 7200 RPM bigger, more formidable, you can plug in when you change. Of course a RAID 0 (disk 2) peripheral USB 3.0 would be even more ideal, but it can also break your budget.
-Dell Alienware M14x meets all of these criteria; Yes, it will be a little heavier. Yes, it will be more expensive. But, more important still, it will get the job done. Any laptop ' thin, light and smooth "and which includes the current more little line of Macbook Pro won't be so IMHO.
Kind regards
Jim
-
How many people currently work at apple (by country, if possible), I write a business report and need to know the answer, thank you.
Watch their deposits of the company. This community is to post technical questions.
We are users like you. We are not Apple. If you wish to contact Apple use the link contact us at the bottom of this page.
-
I searched the internet and many people have the same problem and there are 1 million different web pages that deal with this problem.
I've run several virus scans and removed all except modifier browser called "zwangi."I emptied the cache and set the IPv4, IPv6 auto settings and.Can someone help me here please?Thank you.This forum is for Microsoft Security Essentials.
I suggest that you re - post here->
http://answers.Microsoft.com/en-us/Windows/Forum/networking
You can also Bing - dns server does not - and find answers like this->
http://TechNet.Microsoft.com/en-us/library/cc787724 (WS.10) .aspx
-
Don't know where to post this, but I get spammed by VMware forums.
I answered an ad in VMware workstation forum yesterday, not my first post or reply. Now I get notifications of people posting all sorts of discussions on these forums that I have ever visited. There is no 'stop send me a notification email' option in the mails.
Someone has an idea, or know who to report to?
It is from "[email protected]"" "
Here is a screenshot:
Maybe the e-mail notifications for the forum of the workstation have been enabled for a reason any. Please visit VMware Workstation to see if ' Stop e-mail notifications "are available in the"Actions"pane
If this isn't the case and that all notifications are messages to a dedicated user, visit their profile and check there "Stop email notifications".
André
PS: Thread moved to VMware Workstation to Community Help site
-
How many people use iPhone (6 +) not as the phone but just large Tablet?
I've seen several articles on simplifying people: carrying phones 'fool' or 'function' (shells) for daily life and make calls and using their iPhones as big as, simply, tablets. Don't plan no data, no pockets filled while outside, no worry about breakage, no constant interruption of messages, no constant distraction with applications: more directly in touch with the outside world and no $data plan$ (with the exception of the home wi-fi,...).
I've been thinking it myself.
How many people in the Apple community after this practice? A growing number of (niche)?
(I'm ready for this question should be deleted if inappropriate...)
Polls get deleted.
However, I'm also not really how know how many other people that you would help.
If you do not already have an iPhone 6 + / 6 s +, I'd watch it on the Apple Store. Play with him. Personally, I think that it is too small to make an effective pill. Even without a data plan, it is still fragile. And instead of carrying just an iPhone 6 +, you're carrying a dumb phone and an iPhone 6 +.
How distracted or interrupted, you are by messages or apps is entirely in your control with an active iPhone. Do not disturb is very useful.
-
HOW MANY PEOPLE HAS THE CERTIFICATION MCSE IN THE WORLD
I WANT TO KNOW HOW MANY PEOPLE HAS THE MCSE CERTIFICATION IN THE WORLD
Hello
Please do not type in capital letters because it's difficult to read and considered to be shouting.
Here are some sources for help.
Support MCBS
http://www.Microsoft.com/learning/en/us/help/assisted-support.aspxForums and blogs MCBS
http://www.Microsoft.com/learning/en/us/community/community-default.aspxForums MCBS
http://www.Microsoft.com/learning/en/us/community/blogs-forums.aspx#public-forumsI hope this helps.
-
original title: web cam problem
using Skype... I can see other people, but they cannot see me...
Hello
Be sure to contact the Skype Support like this might be a known issue and they might have the solution.
There is also information and on the Skype Forums.Skype - Support
https://support.Skype.com/en-us/Skype - Forums
http://Forum.Skype.com/Also check with the manufacturer of the system, their drivers and documentation support online and ask
their forums (if any).============
You will probably need to reload the drivers of the device and any camera control software.
Login as an administrator.
Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
will update the driver stack.Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
software (if not more recent get the same).Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlThen let windows updates on however prevent loading of drivers who are often older than the
those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Original title: metadata key - music
My question is actually very specific: when I keyin track using Media Player Info, is this info inserted in the file itself, or only in the index of Media Player? If I have to rebuild the indexes in the metadata file, the indexed fields are kept in?
Only in the index of Media Player. If you remove this file WMP (without actually deleting the computer/folder) and then read the file again, you would see that your changes have disappeared.
To actually change the file, you will need a program known as ID3 Tag Editor.
Maybe you are looking for
-
Download reader for iPhone/iPad iCloud
I store a reasonable amount of photos on my drive to iCloud. This that I was wondering is looking at these photos on an iPhone/iPad (iOS device), do that they download on the device permanently or temporarily, they are downloaded? I'm just concerned
-
On the Satellite 2410-303 CPU upgrade is possible?
My Satellite 2410-303 has Pentium 4 Mobile 1.7 GHZ processor. I want to improve its Pentium 4 2.8 GHZ mobile processor. I think it's possible because its models superiors faster processor and it's unique difference between them. Please, help me in th
-
What can I do to reduce the risk of malware in my system Windows 8?
I came across this document about the virus and Windows 8. It looked like a good first step to help protect against various forms of malware and thought I'd share it with the community.
-
Outlook express 6 error number: 0x800420CA
Cannot send email receive the error number: 0x800420CA
-
I created a project, and the output is in WebHelp. Can I display the table of contents in a format automatically expanded?