"I supposedly ' successfully updated ' SAMSUNG Mobile Composite Device Software, but 'My computer' is not always recognize it

Similar Questions

• Update failed "Samsung Mobile MTP Device"

  Once more, Samsung screwed up my updates.

  The first time I have connected my Galaxy S3 on my PC, a notice to update poped to the top of MS Updates.

  It turns out that it was a Samsung one and surprise, surprise, it could not install!

  Is this also happened when I installed Samsung Kies software, at that time several updates have been triggerede and install attempt failed.

  The blackout resulted in these notes: -.

  SAMSUNG Electronics Co., Ltd. - other hardware - SAMSUNG Mobile MTP Device

  Download size: 4. 3 MB

  You may have to restart your computer for this update is taken into account.

  Update type: recommended

  SAMSUNG Electronics Co., Ltd. other software update released material in may 2012

  More information:
  http://sysdev.Microsoft.com/support/default.aspx

  Help and Support:
  http://support.Microsoft.com/select/?target=hub

  None of the links above is no help for me, can anyone advise if this update is important, or if I should just ignore it?

  I had the same problem. Tried to install it several times and it has always failed. Then one day it suddenly installed successfully. I think that settles the only difference between failure and success was that I had my phone connected to my PC during the successful installation. Try to connect your phone to the PC and run the update.

• Problem Samsung Mobile MTP Device with the Galaxy Tab 10.1 on windows 7 32 bit

  I just bought a new Samsung Galaxy Tab (GT-P7500) Slim 10.1.

  I plugged it in to my pc Windows 7, but the driver "Samsung Mobile MTP Device" could not be installed.
  What can I do?
  Windows is up-to-date and I realize al system requirements.

  Hello

  ·          You get the error message during the installation of the driver?

  Step 1: Launch the hardware and devices troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  See also: http://windows.microsoft.com/en-US/windows7/What-to-do-when-a-device-isn ' t-installed-correctly

  Step 2: You can also download the drivers for your Samsung device from following link:

  http://www.Samsung.com/UK/support/detail/supportPrdDetail.do?menu=FW&prd_mdl_cd=gt-P1000CWAXEU

• Lack of Hardware ID Window7 64 cannot identify Samsung Mobile Composite USB design

  Lack of Hardware ID Window7 64 cannot identify Samsung Mobile Composite USB design

  Contact Samsung or your cellular provider for the software and/or drivers you need.

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• software isinstalled, but message comes up to make sure that your device is connected, the computer is not reconizing machine

  the software is installed, but message keeps occurring that make sure your device is connected.

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description, it seems that you are facing problems with the connection of the device that you get an error message "make sure that your device is connected, the computer is not reconizing machine." I'll be happy to help you with this problem.

  (1) device you're trying to connect?

  (2) how you try to connect the device?

  (3) what software is installed? Are what software you referring?

  (4) have you made changes on the computer before this problem?

  Method 1: I suggest you follow the steps in the link to run the troubleshooter and check if that helps.
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: You can also try uninstalling and reinstalling the drivers and check if the problem persists.

  To resolve this issue, follow these steps:

  1. to open Device Manager, click Start, click files, and research programsand typeDevice Manager. A list of the available items will appear above the search box; Click onDevice Manager. Device Manager opens with the name of your computer to the top and a list of the devices installed on your computer under the name of your computer.

  2. Locate the faulty device in the list of devices, right-click on the device, and then clickUninstall. When a warning message that you uninstall a device in your system, clickOK. Device Manager uninstall the device.

  3. right click on the name of your computer in the Device Manager, then click on Search the hardware changes. Device Manager scan your system and reinstall your device automatically.

  4 right click on the device, and then click Properties. Thegeneral of the device, in theState of the device Properties dialog box tab, you should see the message. This device does not work correctly.

  I hope this helps. Try the above steps and get back to us for further assistance if you have questions about the Windows operating system. We will be happy to help you.

• password does not work and I have reset it. Still does not please help. For some reason, I was instructed to update Flash player. I tried but the password was not accepted.  Reset the password to spawn a return to download Flash player past accepts no

  For some reason, I was instructed to update Flash player. I tried but the password was not accepted.

  Reset the password to spawn a return to download Flash player

  Password not accepted.

  WHAT should I do now?

  Hi mrse69610920,

  It is the OS, not Flash Player to ask for the password.  Please read the FAQ what userid & password I need to install Flash Player?

  --

  Maria

• WINDOWS UPDATES AUTOMATIC @ SHUT DOWN MODE AND THEN MY COMPUTER IS NOT WORKING WHEN I TURN IT BACK

  Wow, I thought that I already asked the question. ??? I recently re - set up my old computer from last year. Everything went well on it. All my programs, files, photos, email and internet wall works very well. I went to shut it down and Windows Update popped up indicating not to touch or power off the computer turns off automatically after Windows updates were installed then... There were 22 updates installed by Windows Update and the computer is down. I waited for 6 or 7 minutes and turned on my system back to see nothing load, my monitor screen educated on and said to go to sleep! If someone can tell me what Windows has done to my system. Why they ask me to pay for something that they obviously screwed and how to contact a live person who can help me with their question? PLEASE, ANY HELP IS GREATLY APPRECIATED. MY NAME IS ELIZABETH AND I CAN BE CONTACTED AT 228.385.0336. Thank you very much!

  Hi Elizabeth,.
   
  Check if the fix given in this link will help you in fixing the issue:
  The computer leaves not put into hibernation or does not Wake-on-LAN mode ensures
   
  I also suggest you to follow the steps in this article and the Coachman.
  How to solve the problems of hibernation and standby in Windows XP
   
  For more information on phone Microsoft support option, see:
  Support for Windows XP technical issues and troubleshooting

• Device/Sanyo cell phone / computer can not find the driver? How can I find driver.

  I am trying to connect my mobile phone (sanyo) to my computer / but computer says it can't find the driver? How can I fix it? I'm new on this and try to get the photos on ebay and craigslist. Thanks for any help.

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• I have successfully downloaded a new version of Java, but the installation is not complete.

  I get the red circle with the white X towards the end of the installation.

  If you want to download on a newer computer, download the following (you have a LOT of software out of data)

  Download these programs and their transfer on a USB key, take it to your computer and install them

  Firefox http://getfirefox.com/

  Java: http://javadl.sun.com/webapps/download/AutoDL?BundleId=73857

  Flash http://labsdownload.adobe.com/pub/labs/flashplatformruntimes/flashplayer11-5/flashplayer11-5_install_win_pi.exe

  After having done that, run the installer, I gave you above once again, these programs are the greatest and it will pop them because they will be updated from now on.

• installed the latest updates of windows 7... now the computer does not recognize my video files avi... says "format not supported".

  I have installed the latest updates (02/27/10) and when I open sony vegas to edit some files avi... they were offline... when I tried to read with windows media player it says format not supported... before when I played these files, they would not have to synchronize audio... it never happened with my other computer with Vista... system restore solved the problem of format not supported... but so far has caused this problem? and what about the problems of synchronization? the files seem to sync when played with the hp program...

  Hi derlonewolf,
   
  Because you performed a System Restore you would not be able to determine which update problem from occurring. You will have to wait for the update to your computer to determine the update that caused the problem. The update does not necessarily cause the problem to occur again. However, you can view the history of updates to updating history.
   
  1. open the control panel (all items view), and click the Windows Update icon.
   
  2. click on the link to view update history.
   
  3. to view the details of a single Windows Update-
   
  (A) select and right-click on a Windows Update list, and then click details.
   
  (B) click on close when finished.
   
  As far as the question of timing is concerened, you can scan SFC on your computer and check if the problem persists.
  
  Steps to perform a scan SFC:
   
  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
   
  2. type the following command and press ENTER:
  sfc/scannow
  [The command sfc /scannow. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions.]
   
  A message appears indicating that "the system scan will start. Be patient, because the analysis may take some time
   
  3. If all the files require that a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue
   
  4. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
   
  5. once the scan is finished, close the command prompt window, restart the computer and check.
   
  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833
   
  You can also make manual updates instead of automatic updates and then see what are updates will be installed on the computer.

  See : http://windows.microsoft.com/en-us/windows7/Turn-automatic-updating-on-or-off

  Post back with the status

   
   
  Aziz Nadeem - Microsoft Support

• I've recently updated to Adobe acrobat reader software, but now I am unable to get the live TV on a site I always use if I can get it on other sites. Can you help me please.

  How can I get TV live on a website, I always use and had troubel after an update.

  Acrobat Reader has NOTHING to do with football. Adobe Flash Player can.

• After that 8.01 updated the former saved passwords autocomplete but new sites will not display the ' remember me ' box. If the site has own box "remember me", it works. All my tools settings please remember passwords. How to make back box "remember me"

  For sites with a previous version, I deleted all cookies, bookmarks, and the old passwords and restarted. No luck.

  Some sites such as Windows Live (Hotmail) use JavaScript to create the input form and the Firefox password manager does not work in cases like this. You can use the extension to save the name and the password in such a case, you will not forget them, but Firefox doesn't fill them even if it was recorded.

• 0 x 80070424: when I use Windows update to download and install hardware (MTP SAMSUNG Mobile device).

  Hi, I got error 0 x 80070424, when I use Windows update to download and install the hardware (SAMSUNG Mobile MTP Device), no matter what Advisor.

  Thank you

  Essam

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. If I understand correctly, you receive the error 0 x 80070424 when you Windows update to download and install the equipment. I suggest you follow the troubleshooting steps to check if this may help.

  1. don't you make changes on the computer before the show?
  2 is the issue limited to Windows update?

  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/windows_update/

  Method 2:
  Try the procedure described in the article knowledge base and check if that helps:
  Levonorgestrol error 0 x 80070424 when you use Windows Update, Microsoft Update, or Windows Firewall
  http://support.Microsoft.com/kb/968002

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry in Windows:
  http://support.Microsoft.com/kb/322756

  Just reply with the results. I'd be happy to help you further.

• Problem with mobile MTP device connection of Samsung.

  Original title: Device

  I have problems with the devices. When I click my devices and printers, he claims that there is a problem with the driver for Samsung mobile MTP device but when I plug it costs and he finds all my photos. I tried troubleshooting and it says that there is a problem with the PnP device. What can I do to fix this? I have try the resolution of the problems, but it does not work. He also says that my pc Ethernet controller is not installed. Once, I tried troubleshooting but without prevail. If anyone can help with these issues it would be greatly appreciated. I tried a system restore, and it doesn't work anymore.

  Thank you very much

  Hi Chris,

  To provide the proper resolution, I would need more information on your side.

  1. which version of the operating system are you using?

  2. What is the brand and model of the computer?

  3. What is the exact model of the Samsung Mobile?

  4. what measures all troubleshooting have you tried?

  This problem may occur because of corrupted device driver.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  What to do when a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  Method 2:
  If the problem persists, try to install the latest driver for Samsung mobile device MTP on the manufacturer's Web site.

  http://www.Samsung.com/us/support/supportMain.do

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.