Lack of Hardware ID Window7 64 cannot identify Samsung Mobile Composite USB design
Lack of Hardware ID Window7 64 cannot identify Samsung Mobile Composite USB design
Contact Samsung or your cellular provider for the software and/or drivers you need.
Tags: Windows
Similar Questions
-
Yosemite - tried erasing to reinstall. Cannot identify or boot from USB?
So I tried to erase the hard drive Macintosh utility disk in Recovery Mode. It seems to have been a problem in the process. Now I am unable to remove anything else, or delete.
I tried to create a USB Bootable for clean installation with El Capitan (terminal: sudo/Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia--volume/Volumes/Untitled--applicationpath Applications / Install\ OS\ El\ Capitan .app X\ - nointeraction) but just get a black screen with a symbol O after trying to start. Now, I can't even connect to the original user profile which inexplicably still exists. He is trying to open a session and then returned to a black screen with a symbol O.
Disc checked and repaired without apparent problem. What have I done?
Your internal hard drive is not partitioned properly. Your drive should be
APPLE HDD (model/size)
Macintosh HD
Let trendy USB. Stop. Hold down command + keys R turning into recovery. Use disk there to clear utility and then create the Macintosh HD partition. You will then be able to install.
You've created an installer that will initialize screen install OS X or allow the start of recovery. It does not start as an OS installed X. "createinstallmedia" is an excellent tool for recovery, but it uses the whole USB. After running, you can dedicate a 8 GB USB Thumb drive for a backup installation media.
Bravo!
-
Satellite L20-199: System cannot identify WLAN card
Hello
I have a L20-199 with LAN wireless satellite. But the system cannot identify the (hardware) wireless network card. Trying to install Intell WLAN driver on the site of Toshiba relevent also impossible to locate a WLAN card. How to install or identify a wireless card in this computer? Or this model is provided with a card WLAN/Pratice? (But I see a symbol engraved for the WLAN at the front of the laptop, the light and the key F8 with symbol WLAN. Could someone help me?
Thank you
AjithHello
No, certainly not the laptop does not support the update of the Wlan card and it has also not been handed over with the wireless network card
I'm sure that you will not find the wifi card in device under network adapters ManagerSo if you want to connect the laptop to the router wireless LAN or WLan you must use an external solution; for example: Wlan USB stick!
-
Cannot identify the Radio Player SANSA - HELP! (PLS)
Cannot identify player Sansa - HELP! (PLS) Hello world:
I took possession of an unknown model of a Radio Player SANSA and have spent the last several months trying to get some use. My second problem is to identify the model of what I can locate manual and the specifications of the user.
The biggest problem is that I couldn't get to show anything (he refused to turn at all). Then a couple of days, the iconic SANSA start screen magically appeared! Now, my biggest problem is to make him do something else. It displays now an error screen permanent which is not very informative, but seems to be a 'record' with an 'X' overlay icon
The only other answer that I was able to induce is that it displays an error message saying not "enough space for music DB. Please free 3 MB. "when a Micro SD card is inserted.
The PIX below are not particularly useful, but you can see the appearance and the error screen. The first and the second are the front and back; the third is the persistent error screen, and the fourth is the "bowels" showing the circuit board. The jury noted STANZA Ver 1.3.
Also there is no sound at all via the headphone jack, and it is not recognized on a Windows or Linux computer. I still find a MAC to see if it can be detected on it.
This message is to ask if anyone can provide info on this model. I have spent hours Googling for any hint of this unit, but have not found index. The unit is 2 "square and about 1/2" thick. The body is metal and there is a clip on the back of the device (also metal). The face is a printed plastic sheet that is just stuck on with adhesive sticky. Finally, the screen is black & white (i.e., no color).
The drive is a slotRadio device. It requires a microSD card to operate; the card will have a SR logo on it. Without microSD card is playable, you should see this icon.
The player has enough cool graphics when you use a SanDisk Slot Radio card. To charge the device or transfer music you will need a card and a micro USB cable.
Here is some info on SlotRadio.
charger and cable are here.
Bob
-
ORA-01157: cannot identify/lock data file error in database pending.
Hello
I have a back-end database and the base ensures (11.2.0.1.0) that runs in ASM with the names of different diskgroup. I applied an incremental backup on a standby database to solve the gap newspaper archive and generated a controlfile to standby in the primary database and restore the standby database controlfile. But when I started the MRP process his starts not and lift error in the alerts log ORA-01157: cannot identify/lock file. When I questioned the standby database file it shows the location on primary data filenames not the database pending.
******************************
PRIMARY DATABASE
*****************************
SQL > select name from v$ datafile;
NAME
--------------------------------------------------------------------------------
+Data/OraDB/datafile/system.256.788911005
+Data/OraDB/datafile/SYSAUX.257.788911005
+Data/OraDB/datafile/undotbs1.258.788911005
+Data/OraDB/datafile/users.259.788911005
****************************************
BACKUP DATABASE
****************************************
SQL > select name from v$ datafile;
NAME
--------------------------------------------------------------------------------
+STDBY/OraDB/datafile/system.256.788911005
+STDBY/OraDB/datafile/SYSAUX.257.788911005
+STDBY/OraDB/datafile/undotbs1.258.788911005
+STDBY/OraDB/datafile/users.259.788911005
The actual physical location of files of database Eve in ASM in the standby server is shown below
ASMCMD > pwd
+ STDBY/11gdb/DATAFILE
ASMCMD >
ASMCMD > ls
SYSAUX.259.805921967
SYSTEM.258.805921881
UNDOTBS1.260.805922023
USERS.261.805922029
ASMCMD >
ASMCMD > pwd
+ STDBY/11gdb/DATAFILE
I even tried to rename the data files in the database backup, but it throws error
ERROR on line 1:
ORA-01511: Error renaming data/log files
ORA-01275: RENAME Operation is not allowed if management undo file is
Automatic.
Kind regards
007
You must specify the complete location
*.db_file_name_convert='+data/OraDB/datafile/,'+STDBY/11gdb/DATAFILE /'
and to rename the data file, your standby_file_management parameter must be set to MANUAL.
-
ORA-01157: cannot identify/lock data file 6 - see DBWR trace file
Dear all,
I use a machine to the BSG that is 64-bit, I installed the oracle 119 in that. First, he was installed at u01 volume root but the size was enough for me, so I changed the volume and new volume as u01. now when I try to start the database his past does not
Here is the error
SQL > startup
ORACLE instance started.
Total System Global Area 3206836224 bytes
Bytes of size 2217632 fixed
1744832864 variable size bytes
1442840576 of database buffers bytes
Redo buffers 16945152 bytes
Mounted database.
ORA-01157: cannot identify/lock data file 6 - see DBWR trace file
ORA-01110: data file 6: ' / u01/app/oracle/product/11.2.0/db_1/dbs/tbs_data.dat'
and u01/app/oracle/product/11.2.0/db_1/dbs/tbs_data.dat that this file is not present it may I know how to recover from this.
Can someone help me please.
Thank you
Gallot
Dear all,
It was because the size of the data file. so I increased the size of the database and has solved this problem
-
ORA-01157: cannot identify/lock data file [HELP! PLEASE!]
I'm under Oracle 11 GR 2. When I tried from Oracle sqlplus, I got the following errors:
I used "the judgment" to stop the Oracle. I'm sure that there are 2 sessions to approve the changes to the database while I closed the Oracle. Is there anyone know how to fix this?ORA-01110: data file 8: '/dev/raw/raw8' ORA-01157: cannot identify/lock data file 8 - see DBWR trace file
Many thanks for any help!Hmm...
change 315220074 September at 12/10/2011 14:34:12 necessary
but your newspapers online redo is 2011-10-12 16:31:54 from only.
So, there are some transactions in the stream of roll forward relative to this data file between 14:34:12 and 16:31:54.Hemant K Collette
-
Problem with sleep, cannot identify the customer in ALF
Hello!
I have primary and standby DB (10.2.0.1, OEL5.3 x 64 primer, sleep on OEL5.3 itanium)
Almost everything is fine, but sometimes I have this problem:
FAL [Server]: cannot identify the customer in ALF, null string provided
[ORA-07445: exception encountered: core dump [< 0x3f4b370560 >] [SIGSEGV] [address not mapped to object] [0x403FE6D3A60] []]
Piece of newspaper of primary alerts:
Wed Mar 25 15:00:30 2010
Thread 1 cannot allot of new newspapers, sequence 30980
Private stream flush is not complete
Currently Journal # 4, seq # 30979 mem # 0: /sdd/oradata/a10/redo04a.log
Currently Journal # 4, seq # 30979 mem # 1: /sdc/oradata/a10/redo04b.log
Thread 1 Advanced to record the sequence 30980
Currently journal # 5 seq # 30980 mem # 0: /sdd/oradata/a10/redo05a.log
Currently journal # 5 seq # 30980 mem # 1: /sdc/oradata/a10/redo05b.log
Wed Mar 25 15:00:37 2010
FAL [Server]: cannot identify the customer in ALF, null string provided
Wed Mar 25 15:00:37 2010
Errors in the /app/oracle/admin/a10/udump/a10_fal_957.trc file:
[ORA-07445: exception encountered: core dump [< 0x3f4b370560 >] [SIGSEGV] [address not mapped to object] [0x403FE6D3A60] []]
Wed Mar 25 15:00:47 2010
ARC3: Standby redo log file selected for thread 1 sequence 30979 for destination LOG_ARCHIVE_DEST_3
Piece of a10_fal_957.trc:
ALF Redo shipping Client does not have a network connection
Exception signal: 11 (SIGSEGV), code: 1 (address not mapped to the object), ADR: 0x403fe6d3a60 PC: [0x3f4b370560, cannot find s$]
< 0x3f4b370560 >]
The primary settings:
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
fal_client string a10sb
fal_server
log_archive_config string
string log_archive_dest_3 = a10sb service
log_archive_dest_state_3 string ENABLE
log_archive_format string %t_%s_%r.dbf
Piece of standby alert log:
Media, recovery waiting for thread 1 sequence 30979
Wed Mar 25 15:03:03 2010
Pick up the empty sequence in thread 1, sequence gap 30979-30979
FAL [client, MRP0]: error recovery 3113 archived redo log of the a10
Wed Mar 25 15:03:04 2010
Errors in the /app/oracle/admin/a10sb/bdump/a10sb_mrp0_15411.trc file:
ORA-03113: end of file on communication channel
Wed Mar 25 15:03:13 2010
RFS [6]: Eve successfully opened journal 1: ' / sdd/oradata/a10sb/redo01a.log'
Wed Mar 25 15:03:34 2010
Online Redo Log recovery: thread 1 mem Group 1 Seq 30979 reading 0
Mem # 0 0 error: /sdd/oradata/a10sb/redo01a.log
# 1 MEM Err 0: /sda/a10sb/redologs/redo01b.log
Wed Mar 25 15:05:03 2010
Media, recovery waiting for thread 1 sequence 30980
Sleep settings:
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
fal_client
fal_server string a10
What is going on?
Why "ALF redo shipping Client not establish Network Login" does it happen?
And how I can fix without path?
A big thank you!
DmitryFAL_CLIENT is an entry of tns for the current instance
FAL_SERVER is an entry of tns for example where RSF fetch missing archive logs.Please provide both side sleep. Make sure you have them in file tnsnames.ora pending
-
ORA-01157: cannot identify/lock data file 6
I work for a school district and recently ran into problems with writing data in a database by using ASP.
Background:
We are currently running Oracle Database 11 g Release 11.1.0.6.0 - 64 bit Production With the Real Application Clusters on Linux systems option.
We have a workable tablespace/database using our system of management of the school called "Genesis." There is no problem reading, writing or deletion of records through this site web-based application.
Problem:
I wrote a few ASP pages that read from the 'background' database tablespace that works reliable. The problem is that I created a new tablespace/user/database with two tables that I write for.
If I run a test trying to add new records via my ASP page Let's say 5 times, it cannot work more than 3 of those times.
The error I get is as follows:
Error Automation Oracle '800a01b8 '.
Data retrieval error, ORA-01157: cannot identify/lock data file 6 - see the file trace DBWR ORA-01110: data file 6: ' / u01/app/oracle/product/11.1.0/db_1/dbs/ORCL_GENESIS'
/ Parent_Portal/Confirmation.asp, line 40
Looking at the knowledge base (Article NOTE: 268061.1) mentions that there are maybe not ebough available file descriptors. We increase the amount, the same results.
Also, if it's important, it's the code that I use to write to the database:
Set OraSession = CreateObject ("OracleInProcServer.XOraSession")
Set OraDatabase = OraSession.OpenDatabase ("ORCL" _
(' Username/password name', cint (0))
Set OraDynaset = OraDatabase.CreateDynaset ("SELECT * FROM PARENT_PORTAL.") (The STUDENTS", cint (0))
OraDynaset.AddNew
OraDynaset.Fields ("Email"). Value = strEmail
OraDynaSet.Fields ("STUDENTID"). Value = strStudentID
OraDynaset.Update
Set OraDynaset = OraDatabase.CreateDynaset ("SELECT * FROM PARENT_PORTAL.") (Accounts", cint (0))
OraDynaset.AddNew
OraDynaset.Fields ("Email"). Value = strEmail
OraDynaset.Fields ("LASTNAME"). Value = strPLName
OraDynaset.Fields ("FIRSTNAME"). Value = strPFName
OraDynaSet.Fields ("PHONE"). Value = strPhone
OraDynaset.Update
Set OraSession = Nothing
Any help on this would be greatly appreciated.
Thank you
JasonQuery
Select file_name in dba_data_files
Union
Select Member from v$ logfile
Union
Select name from v$ controlfile;to identify all the database controlfiles and redo online.
A database is the database files.
An instance is all the processes running on a node.
To the CARS, you have 2 (or more) of the instances that are running on 2 nodes (or more) to access the same database simultaneously.
A node can go down or die or be shot in the head, but the database continues to be available through the second instance on the other node. This is the reason for all of the CARS. -
Hi, I got error 0 x 80070424, when I use Windows update to download and install the hardware (SAMSUNG Mobile MTP Device), no matter what Advisor.
Thank you
Essam
Hello
Thanks for posting in the Microsoft community!
You have reached the right forum for your question. If I understand correctly, you receive the error 0 x 80070424 when you Windows update to download and install the equipment. I suggest you follow the troubleshooting steps to check if this may help.1. don't you make changes on the computer before the show?
2 is the issue limited to Windows update?Method 1:
Run the fix it and check.
http://support.Microsoft.com/mats/windows_update/Method 2:
Try the procedure described in the article knowledge base and check if that helps:
Levonorgestrol error 0 x 80070424 when you use Windows Update, Microsoft Update, or Windows Firewall
http://support.Microsoft.com/kb/968002Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry in Windows:
http://support.Microsoft.com/kb/322756Just reply with the results. I'd be happy to help you further.
-
need help... I cannot find ati mobility radeon hd 6470 software for my hp pavilion 1115tx g4
Hi Pinpogi,
The drivers arehere. Select the driver AMD and read the information to ensure that it is for the good installed onboard graphics also.
Best regards
ERICO
-
cannot launch windows mobility Center help feature pop up
cannot launch windows mobility Center help feature pop up
Many thanks to you I found how do not so long ago but Bravo for your help.
-
suddenly, I could not print because the computer cannot identify the printer
Original title: printers
I have windows XP Professional and a printer is connected to my PC, all of a sudden I could not print because the computer is unable to identify the printer. I unplugged the printer and plugged again and I turned off the computer, as I went to adding hardware but without success. could you please tell me how to restore the printer connection. In addition, the printer icon appears at all when I plug the printer cable
Hello
I suggest you run the difficulty mentioned in the link below:
http://support.Microsoft.com/mats/printing_problems/en-us
Alternatively, you can follow the steps mentioned in the link below to fix the issue:
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Hope this helps
-
Vista cannot identify the network
Hello, I have a similar problem like this post
http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/500f6465-83ab-405a-9ed2-23f8bf1a9236 while Vista connects to a network, but may not identify the network and therefore cannot access the internet for any purpose. I saw the same problem on 4 different laptops in the last 2 weeks. All that relied on a wireless connection, but now will not connect either wired or wireless.
I tried the Patch flag Broadcast and anything else that I could find through Google.
As has happened on several machines at the same time, I can only assume that it's down to a Windows Update. I tried to install SP2 to Vista and later updates, but in vain. Interestingly, my wife, computer Dell laptop running Vista Business, and so far it still works fine.
If you could be of any help to me I would be very well kept, my next step could very well be the reinstallation of the OS.
Thank you very much.Hello
Alas, it seems to be still no solution for this problem. I am a small scale system integrator and repair service in my spare time, and now I just took my system 10th with this anomaly. So far, my only response is to re - install Vista, which worked perfectly on previous systems 9.
Any other ideas?Crebomonster
-
Cannot identify the network under Windows Vista
I have windows vista SP2 and cannot connect to internet. I see networks, but the computer is not able to identify. I tried with several different networks, and the result is the same.
Hi ClarkHayes,
1. What is the error exact message you when you try to connect?
I suggest you try the steps from the following link and see if that helps.
In the Windows wireless network connection problems
http://Windows.Microsoft.com/en-in/Windows/help/wireless-network-connection-problems-in-Windows?T1=tab04Solve problems, find wireless networks
http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-finding-wireless-networks
Maybe you are looking for
-
Reproducing an event - minimum required files
What is the set of the file Final Cut to the minimum that I would need to reproduce an editing session (event) made by someone else on another Mac? Editior1 and Editor2 both have the same video raw images... stored in folders with the same named. Bo
-
Satellite U200: DVD - ROM does not work correctly
DVD - ROM not working. After the fire of two optical drive DVD - RW, loss of ability to burn and can read only CD with difficulties of the sum. It is not possible to recovery operating system. Look like lost laser precise positioning device and can n
-
I tried to work what is this notification icon on my Yoga 2 10 Tablet but I just can't cope. Could someone enlighten me please?
-
these fake microsoft tech called me today
these fake microsoft tech called me today I didn't give their my Bank info, but they had me there download 2 things a they were on my computer what do I do now to make sure im protected? and they can access all the computers in our modem now?
-
My 'Temp' folder has more 600 000 files it contains.
I have empty every chance I get, but the rate that it creates these files is ridiculous. For example, at least 100,000 have been a night at 01:43 when I know that the phone was off. I have a Toshiba Satellite running Vista and this is a constant prob