I try to get the average of every 10 points at my table...

Similar Questions

• I get the certificate error every time.

  To the right, when I try to access AKO, army knowledge online (www.us.army.mil) I get the certificate error every time.  Not only I got one when I first on the site, but also when I try to access my mail from the army and other features of the site.  I checked the settings of date and time, and they are all correct.  Also, the certification is valid until 2012.  Any help would be greatly appreciated. P.S. I am using XP

  It is simply because Microsoft does not charge the military by default root CA certificates.  All you need to do is load the certificates on your computer.  To do this, the instructions are on this Web site:

  <>http://dodpki.c3pki.Chamb.DISA.mil/rootca.html >

  HTH,
  JW

• Try to get the code, but it says device saved

  Try to get the code in order to register and get additional codes to pay for services and it says that my drive is already registered. How to fix this? I have not had this code yet. Œuvres of Netflix, but it shows an instant queue of course someone else or gratis. I do not know. Someone help here?

  This a good site thank you never one for all the beautiful work fixed that I'm just getting started

• Get the average of the measurements in an image

  Hello everyone.

  First of all I thank very you much to be able to help and read this post.

  I'm trying to measure an object. Do I use the CLAMP block (horizontal clamp, it doesn't matter if it's the distance max or min).

  The problem is that you can calculate the maximum distance or minimum between the edges which lie in a return on investment with this VI.

  But I would get the average of all measurements in the KING, because it can be obtained because this VI use them to know what is the maximum and the minimum, but the problem is that I do not how to access.

  Any ideas to get the average?

  Thank you very much.

  I suggest using the IMAQ rake instead of the clip because it returns all edges detected.

  Take a look at the attached vi, I started from the example of the clamp vi and adding an option of rake.

• [Labview] I want to get the average value in each new 100 samples.

  Hello. I'm Sophie.

  I'm studying Labview for my research.

  For me, the sampling frequency is 125KHz.

  I want to get the average value in each new 100 samples.

  Therefore, I want to get an average value of 1 ~ 100th samples and store this average value. Call assets(1).

  Then, I want to get an average of 101 ~ 200th samples and store this means value, call moyen2.

  .

  .

  .

  .

  I don't know how me I want.

  Thank you

  Sophie.

  

• I get the message "Could not authenticate you" when I try to get the portfolio management

  Original title: portfolio in MSN Money management.

  I get the message "Could not authenticate you" when I try to get the portfolio management and when I try again, the same message is repeated.  What type of authentication is necessary?

  Hello

  I recommend you contact the support team of MSN Money for assistance on this issue.

  http://social.Microsoft.com/forums/en-HK/money/threads

  See also Solution Center-silver

• When I try I get the windows update error number: 0x8024400A

  When I try I get the windows update error number: 0x8024400A

  Hello

  
  This problem is limited to a particular update or all updates? Thanks for mentioning the number of KB.
   
  
  Follow the suggestions below for a possible solution:
   
  Method 1
  I suggest you consult the site mentioned below:
  Temporary connection related errors may occur when you use Windows Update or Microsoft Update
  http://support.microsoft.com/kb/836941.
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   
  Method 2
  If the problem is not solve I suggest you try the procedure described in the link mentioned below.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/
   
  See the link below and follow the steps suggested to DG_963 on July 1, 2012.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-Update-error-0x8024400a-on-clean-install/4c79d20d-A4B3-4724-A6D8-4a768559038a
   
  Let us know the status of the issue.

• When I try and get the Microsoft Messaging support, he asks me a 20 digit number. When I enter this number, he told me that he is not registered in the country I've selected.

  I have Dell XPS M1330 with windows vista home premium. When I try to get the support of e-mail on the microsoft support site, he asked 20-digit PID number, when I entered that number, it says this PID is not saved in the chosen country, I m from India, I chose India-English. I also tried in the United States, United Kingdom, but whenever he says the same thing. I can't support for the supplied windows pre-loaded with my laptop. I ve the product key and PID number. Pls guide me to do this, my windows is enabled.

  original title: Support of Windows problem

  Reference Dell are responsible for their OEM of Windows versions. Microsoft supports the commercial versions of Windows. I'm not familiar with the details of the software support arrangements, but it is the basis that applies.

  What is the problem?

• I have a HP computer and I try to get the best performance on it

  Dear community,

  I have a HP computer and I try to get the best performance on it, but it does not work. I try to update the drivers and use the memory of storge on USB keys and other stuff like using Microsoft Security Essenticals it is sort of: wered because there is no no way around my problem that way happens to you guys, please I want to just play and have the best performance that I can handle it.

  I think I'll put my memory to 8 GB of Ram or 16 GB of Ram.

  Thanks for your help.

  Original title: Windows 7 HP 2000-369WM

  Hello

  Before upgrade you your RAM, check at HP for the specifications of your computer to see what max amount and type of RAM your motherboard will / can use, or download and run the Crucial Scanner:

  http://www.crucial.com/USA/en/systemscanner

  Also, if you use Windows 7 32 bit, 4GBs is the maximum RAM that can be installed, with the exception of Starter which is 2GBs.

  If you are using Windows 7 64 bit, what are the limits of RAM max for each edition (there is no Starter 64 bit)

  http://Acer.custhelp.com/app/answers/detail/A_ID/2729/~/what-is-the-maximum-amount-of-RAM-memory-supported-by-Windows-7%3F

  Home Basic	8GB
  Home Premium	16GB
  Professional	192GO
  Enterprise	192GO
  Ultimate	192GO

  _________________________________

  And follow these steps to keep your device works properly:

  Search for malicious software with the FREE version of this program.

  This is the right link to download included.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And it is not recommended to use a register or a program of cleaning/TuneUP/utilities they can do more harm to your any good operating system that they claim to be able to do.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• Try to get the old software to work on Windows 7

  I am trying to run old software on my Windows 7 PC. It's a language program that was given to me recently. When I insert the disc and try to run the program I get the following error message. "the version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. "Then I tried to run the program in compatibility mode with the two 95, 98, 2000 and Windows XP however whenever I test with one of these compatibilities nothing happens. Then once I have troubleshoot it tells me I have a question that is "Application Incompatible." Is there anything else I can try to get the program to work?

  Hello

  If you have Windows 7 Professional or ultimate, you can try XP mode...

  http://www.Microsoft.com/Windows/Virtual-PC/

  Tricky

• How to get the average time of the day

  Hello

  Oracle 11g R2. Looking for a way to determine an average duration of the day. The data in the table are the following and are stored as VARCHAR2. These data represent the time of day a work finished and is stored each day in the table.

  (HH)

  00:21:45

  00:25:03

  00:23:09

  00:30:10

  Hello

  You want to use the AVG function, but that doesn't work on the number, it must convert the strings to numbers (for example, the NUMBER of days, 0-1), so get the average and then convert them to a string.

  SELECT TO_CHAR (TRUNC (SYSDATE) + AVG (TO_DATE (str, "HH24:MI:SS")

  -TRUNC (SYSDATE, 'MONTH')

  )

  , "HH24:MI:SS".

  ) AS avg_time

  FROM table_x;

  ATTENTION: the average of 23:50 to 00:50:00 will be 12:20, 00:20:00 not.  23:50 is 23 hours later at 00:50, not 1 hour earlier.

  Of course, you will get an error if even 1 of the strings is not valid.

• CS6 Photoshop Camera Raw 7.1 Installation failed. Error code: U44M2P7 - try to get the Camera Raw Filter for Photoshop CS6

  CS6 Photoshop Camera Raw 7.1 Installation failed. Error code: U44M2P7 - try to get the Camera Raw Filter for Photoshop CS6

  U44... Update error http://forums.adobe.com/thread/1289956 can help

  Try to install your updates manually

  Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

• I have subscription for adobe cc and when I try to get the first he comes up with an unusable version of first cs6 for some reason, I can't change it, please help me

  I have subscription for adobe cc and when I try to get the first he comes up with an unusable version of first cs6 for some reason, I can't change it, please help me

  Your system meets the criteria for more recent versions of first?

  Premiere Pro - http://helpx.adobe.com/premiere-pro/system-requirements.html

• How to down load update13.1?  Wen I try I get the error Code: U44M1I210.

  How to down load update13.1?  Wen I try I get the error Code: U44M1I210. I am now dtuck in a circle.  Each timi I stard Photoshop elements, it goes to the update screen.  I just bought today.

  You do not do so in EPS, you create the new user on your computer, and then start PSE while signed in as a user. You use windows or a mac?

• Try to get the slide show gadget extend in the background as a banner or a footer, can someone help me with this?

  Try to get the slide show gadget extend in the background as a banner or a footer, can someone help me with this?

  You can use the full width slide show on master so it would show in the background of the page.

  Thank you

  Sanjit